The bentonite buffer material is a crucial component in an engineered barrier system used for the disposal of high-level radioactive waste. Because a large amount of heat from the disposal canister is released into the bentonite buffer material, the thermal conductivity of the bentonite buffer is a crucial parameter that determines the design temperature. At the Korea Atomic Energy Research Institute (KAERI), a new standard bentonite (Bentonil-WRK) has been used since 2022 because Gyeongju (KJ) bentonite is no longer produced. However, the currently available data are insufficient, making it essential to investigate both the basic and complex properties of Bentonil-WRK. Thus, this study evaluated its geotechnical and thermal properties and developed a thermal conductivity empirical model that considers its dry density, water content, and temperature variations from room temperature to 90°C. The coefficient of determination (R2) for the model was found to be 0.986. The thermal conductivity values of Bentonil-WRK were 1–10% lower than those of KJ bentonite and 10–40% higher than those of MX-80 bentonites, which were attributable to mineral-composition differences. The thermal conductivity of Bentonil-WRK ranged between 0.504 and 1.149 W·(m−1·K−1), while the specific heat capacity varied from 0.826 to 1.138 (kJ·(kg−1·K−1)).

게임의 끝으로 불리는 엔드게임 콘텐츠는 플레이어가 더 이상 게임에서 즐길 수 있는 콘텐츠가 소비된 현상을 의미한다. 게임 디자이너에게 있어 게임의 끝에 다다랐다는 의미는 그만큼 게임 을 즐겼던 플레이어가 해당 게임에 흥미를 잃고 게임에서 이탈하는 현상을 보이기 쉽다. 많은 게임 제작자, 그리고 디자이너에게 플레이어가 게임에서 이탈하는 행위는 큰 숙제이자 직면해 야 하는 숙제로 다가오고 있다. 게임에서 이탈한다는 것은 더 이상 플레이어가 플레이 했던 게 임을 즐길 이유가 없으며 이는 출시된 게임의 생명이 다했다는 의미이기도 하기 때문이다. 이 에 많은 게임 제작사들이 게임의 끝에서 다음 차기작 준비를 위한 기간 사이 DLC(Downloadable Contents)을 중간에 투입하거나 새로운 패치 업그레이드 등을 통해 게임 의 생명을 연장시키고 있다. 연구는 게임의 끝이 아닌, 추가적으로 게임 플레이어가 게임을 플 레이하는 수단으로서 엔드게임 콘텐츠를 접근하고, 이에 엔드게임 콘텐츠를 지니고 있는 게임 을 분석하여 엔드게임 콘텐츠의 구조를 제안하고자 한다. 이에 플레이어가 더 해당 게임을 찾 으며 게임에서 이탈하는 행동을 억제하는 요인들을 분석한다. 이를 위한 과정으로 장르와 게임 의 형태를 기준으로 게임에서 나타나는 엔드게임 콘텐츠들을 형상화 한 결과, 엔드게임 콘텐츠 설계에 있어 게임 디자이너 뿐만 아니라 게임 제작에 참여하는 모든 구성원들의 관심 아래 플 레이어게 더 관심 받고 지속 가능한 게임 즉 엔드게임 콘텐츠 설계가 가능성을 논의한다.

본 연구를 통해 한국산 Thyas속을 검토하였다. 이 중, T. coronata (Fabricius, 1775)는 성충 및 생식기 도해사진을 기반으로 최초로 그 분류학 적 기재문을 작성하였다. 모든 한국산 Thyas속 종에 대한 분류학적 진단형질 및 분포 정보를 함께 제공하였다.

Background: Self-myofascial release using a foam roller has short-term effects for improving muscle function and joint range of motion (ROM) and reducing delayed onset muscle soreness (DOMS) after exercise. Objectives: The purpose of our study was to examine the muscle physiological changes for each set in self-myofascial release of the hamstring muscles using a foam roller in order to provide basic data for the most effective program composition for improving muscle tension, stiffness, and flexibility of the hamstring muscles. Design: A quasi-experimental clinical trial. Methods: To confirm the effect of self-myofascial release of the hamstring muscles using a foam roller, muscle tone and stiffness of the hamstring muscles were measured. As an intervention method, the study subject performed four sessions of self-myofascial release by moving a foam roller back and forth on the posterior thigh muscle of the right leg. Results: There were statistically significant changes in the stiffness of the biceps femoris and the flexibility of the hamstring muscles. Conclusion: Self-myofascial release with foam rolling is an effective intervention method for increasing hamstring flexibility and ROM, and it is recommended as effective to perform self-myofascial release for three to four sessions to maintain normal muscle tone and stiffness of the hamstring muscles.

In order to assess the relative importance of providing rural life services for the sustainability of rural communities and determine their prioritization, this study employed Analytic Hierarchy Process (AHP) to derive the relative importance of sectors and items in the realm of life services influencing the quality of rural life. A survey was conducted with three groups of experts. Group I consisted of experts in rural life services and rural environmental research (22 individuals), Group II included government officials responsible for implementing rural agreements in pilot areas (18 individuals), and Group III comprised executives from the Rural Life Improvement Association and 4-H organization working towards improving rural life and society (20 individuals). The analysis results revealed the following facilities as top priority in their respective categories: ‘National and Public Childcare Centers’ for ‘Childcare,’ Elementary and Middle Schools for ‘Education,’ Senior Welfare Facilities for ‘Welfare,’ Cultural Centers and Local Cultural Facilities for ‘Culture,’ Public Sports Facilities for ‘Sports,’ Emergency Medical Services for ‘Healthcare,’ Commercial Facilities in daily routines for ‘Commercial and Residential Services,’ Emergency Safety Agencies for ‘Administration and Security,’ and rural village Shelter for ‘Leisure and Rest.'

Since rice is the main food in Korea, there are no regulations on corn milling yet. Corn is known as one of the world's top three food crops along with wheat and rice, and it is known that 3.5 billion people worldwide use corn for food. In addition, corn mills are not developed or sold in Korea, but the use of corn mills is increasing significantly in many countries in Southeast Asia. In the Philippines, as Korea's rice mill import increases, Korea's KAMICO (Korea Agricultural Machinery Industry Cooperative) and domestic company A agreed to develop a corn mill jointly with PHilMech, an organization affiliated with the Philippine Ministry of Agriculture. However, research on corn milling was very insignificant, so the development was carried out based on the technology of Korea's rice mill. Rice milling is performed by peeling off the skin of rice and producing brown or white rice, so it is carried out by removing the skin and cutting the skin. On the other hand, in the corn mill, the skin of the corn is peeled, pulverized and selected to produce main products suitable for edible use. Therefore, in order to develop a corn mill, processes such as peeling, transfer, grinding, sorting, and by-product separation are required, and suitable parts must be developed. In addition, the performance must be gradually improved through experiments in which corn is repeatedly milled. The Philippines produces 7.98 million tons/year of corn, which is about 100 times that of Korea, and is mostly consumed as a staple food. This is about 10% of the total crop production in the Philippines. In addition, the main cultivation complexes of corn are the mountainous regions of Tarlac or Pangasinan, and the produced corn is 72.4% of the so-called yellow corn called Arabel and Sarangani, and the remaining 27.6% are known as white corn. In this study, it was intended to produce grains of 2.5 mm or less suitable for food for yellow corn and to develop a corn mill for 200 kg per hour. Detailed conditions for development are stipulated as more than 55% of the main product recovery rate, more than 31% of the by-product recovery rate, less than 5% of the raw material loss rate, and more than 80% of the embryo dislocation rate. In this study, to achieve this, the overall process of the corn mill was developed, and the optimal conditions for the corn mill were obtained through the development of parts and empirical tests to improve performance. In addition, it was intended to achieve the development goal by evaluating and analyzing the performance of each part so that it did not conflict.

This study explores EFL English learners’ reactions and achievements when exposed to two types of online learning, pre-recorded lectures and real-time lectures, in a semester-long English reading class. The participants were 60 Korean university English learners who attended both types of online lectures for six weeks each. They studied three parts: reading comprehension for top-down and bottom-up reading skills, grammar, and vocabulary. Midterm and final exams assessed the learners’ achievements, and one online survey was conducted to investigate their reactions. The results showed that the participants preferred to study recordings and were most satisfied with their grammar studies in recorded lectures but preferred real-time lectures for reading comprehension. The study also found that they attained better scores on top-down reading skills and vocabulary learning through recorded lessons and higher scores on bottom-up reading skills and grammar learning through real-time lectures. Finally, the study shows the participants preferred to attend a combination of both online methods. This study suggests salient online learning ways for an English reading course.

The purpose of this study was to develop the Functional golf inner-wear by preventing the injuries and enhancing the performance of the Golf swing by checking the influence of the wearing of the functional golf inner-wear considering golf characteristics on the Swing trajectory and Shot distance. Functional inner-wear effective for golf swing was manufactured using the sports taping method. Changes in driver and iron swing before and after wearing the functional golf inner-wear manufactured in this way were measured using trackman equipment. Measurement variables were limited to Club Speed, Attack Angle, Club Path, Ball Speed, Smash Factor, and Priority. Before and after wearing functional golf inner-wear, there were statistically significant differences in driver club speed, iron club speed, driver etch angle, iron club pass, driver ball speed, driver smash factor, iron smash factor, driver carry, iron carry, and right shoulder joint proprioceptive sensory ability. As a result, functional golf inner-wear is effective for ball speed, impact, and carry by increasing club speed and efficient swing. Future research will focus on the development of functional golf that can improve the swing ability in a short game that plays an important role in the golf game through various sports taping grafting technique, textile, special material, film, Research on functional golf inner-wear.

Effects of glutamic acid (Glu) and monosodium glutamate (MSG) on oxidative stability of oil-in-water (O/W) emulsions with different emulsifier charges during riboflavin (RF) photosensitization were evaluated by analyzing headspace oxygen content and conjugated dienes. Cetyltrimethylammonium bromide (CTAB), Tween 20, and sodium dodecyl sulfate (SDS) were used as cationic, neutral, and anionic emulsifiers, respectively. Glu acted as an antioxidant in CTAB- and Tween-20-stabilized O/W emulsions during RF sensitization, whereas Glu acted as prooxidants in SDS-stabilized O/W emulsions in the dark. However, adding MSG did not have a constant impact on the degree of oxidation in O/W emulsions irrespective of the emulsifier charge. In RF-photosensitized O/W emulsions, the emulsifier charge had a greater influence on antioxidant properties of Glu than on those of MSG.

This study examines the rise of the Body Positive Movement on TikTok and its role as a form of online content activism influencing the fashion design and industry. Through a combination of literature review and case study methodology, the study explores the expression techniques and thematic types of Body Positive Movement on TikTok. Reviews of literature, previous studies, online articles, fashion journals, and relevant search terms on TikTok informed a definition of Body Positive Movement and an analysis of its formation and rise. The research findings confirm the impact TikTok content on Body Positive Movement has on the fashion industry in addressing external factors (i.e., ‘Appearance’, ‘Race’, ‘Aging’, ‘Physical Disability’) and intrinsic factors (i.e., ‘Acceptance of Diversity’, ‘Self-Esteem’, ‘Rejection of Stereotypes’, ‘Appropriate Representation’, ‘Information Provision’). The key external factor , ‘Appearance’, includes subcategories such as ‘Body Shape’, ‘Body Hair’, ‘Skin’, and ‘Facial Features’. TikTok content creators on fashion creatively combine music, emojis, and visual storytelling to exhibit positive self-perception concerning these factors. A significant finding of the study is that short clips predominantly manifesting external factors differentiate into informative or enlightening videos associated with intrinsic factors. The study underscores Body Positive Movement's important influence on the fashion industry from design to presentation.

본 논문은 회분식 반응기에서 습식 산화법으로 합성한 칼륨 페레이트(VI)에 의한 난분해성 아조 염료Reactive Black 5의 분해 과정을 연구하는 것을 목적으로 한다. 수용액에서 RB5의 분해는 pH, Ferrate (VI) 투입량, 초기 농도, 수용액 온도 등 다양한 변수의 조건에서 연구되었다. RB5 경우에는 최대 분해 효율은 pH 7.0에서 63.2%가 달성되었으며, 이 실험 조건에서 얻은 kapp 값은 190.49 M-1s-1 으로 나타났다. 온도 또한 가장 중요한 매개 변수 중 하나로 연구되었으며, 그 결과로부터 온도(45°C까지)를 증가시키면 페레이트(VI)에 의한 아조 화합물 염료의 분해 효율이 증가하고, 온도가 45°C를 초과하면 분해 효율이 저하되는 것으로 나타났다.

This study explores the profound impact of varying oxygen content on microstructural and mechanical properties in specimens HO and LO. The higher oxygen concentration in specimen HO is found to significantly influence alpha lath sizes, resulting in a size of 0.5-1 μm, contrasting with the 1-1.5 μm size observed in specimen LO. Pore fraction, governed by oxygen concentration, is high in specimen HO, registering a value of 0.11%, whereas specimen LO exhibits a lower pore fraction (0.02%). Varied pore types in each specimen further underscore the role of oxygen concentration in shaping microstructural morphology. Despite these microstructural variations, the average hardness remains consistent at ~370 HV. This study emphasizes the pivotal role of oxygen content in influencing microstructural features, contributing to a comprehensive understanding of the intricate interplay between elemental composition and material properties.

The Spectro-Photometer for the History of the Universe, Epoch of Reionization and Ices Explorer (SPHEREx) will provide all-sky spectral survey data covering optical to mid-infrared wavelengths with a spatial resolution of 6.′′2, which can be widely used to study galaxy formation and evolution. We investigate the galaxy-galaxy blending in SPHEREx datasets using the mock galaxy catalogs generated from cosmological simulations and observational data. Only ∼0.7% of the galaxies will be blended with other galaxies in all-sky survey data with a limiting magnitude of 19 AB mag. However, the fraction of blended galaxies dramatically increases to ∼7–9% in the deep survey area around the ecliptic poles, where the depth reaches ∼22 AB mag. We examine the impact of the blending in the number count and luminosity function analyses using the SPHEREx data. We find that the number count can be overestimated by up to 10–20% in the deep regions due to the flux boosting, suggesting that the impact of galaxy-galaxy blending on the number count is moderate. However, galaxy-galaxy blending can marginally change the luminosity function by up to 50% over a wide range of redshifts. As we only employ the magnitude limit at Ks-band for the source detection, the blending fractions determined in this study should be regarded as lower limits.

A force-free field (FFF) is determined solely by the normal components of magnetic field and current density on the entire boundary of the domain. Methods employing three components of magnetic field suffer from overspecification of boundary conditions and/or a nonzero divergence-B problem. A vector potential formulation eliminates the latter issue, but introduces difficulties in imposing the normal component of current density at the boundary. This paper proposes four different boundary treatment methods within the vector potential formulation. We conduct a comparative analysis of the vector potential FFF solvers that we have developed incorporating these methods against other FFF codes in different magnetic field representations. Although the vector potential solvers with the new boundary treatments do not outperform our poloidal-toroidal formulation code, they demonstrate comparable or superior performance compared to the optimization code in SolarSoftWare. The methods developed here are expected to be readily applied not only to force-free field computations but also to time-dependent data-driven simulations.

Background: Cerebral palsy presents significant challenges in motor function for affected children. While conventional bottom-up approaches are common in physical therapy, there is increasing interest in the efficacy of the top-down approach. Objectives: To investigated the impact of applying the top-down approach in physical therapy for a child diagnosed with cerebral palsy, focusing on functional improvement and quality of life. Design: A single-case study. Methods: The patient was a 15-year-old boy with spastic diplegic cerebral palsy who was entering middle school. Cerebral palsy treatment approach of the top-down method (jumping rope) was used to guide and direct physical therapy. Results: The child improved in muscle strength of lower extremity, gross motor function, participation and self-esteem, but the pattern of his gait seemed to be more severe on tiptoe. When the child participated in a jumping rope class, he was able to do more than 10 jumps. Conclusion: The effectiveness of the top-down approach in enhancing functional outcomes and quality of life in children with cerebral palsy. It highlights the potential of this approach in pediatric physical therapy, warranting further research validation.

Background: Most studies targeting stroke patients have confirmed improvements in balance and walking using immersive and non-immersive virtual reality training programs. However, to date, there are not many studies targeting brain activation enhancement for the two training programs. Objectives: The purpose of this study is to investigate the effect of a virtual reality training program on the EEG of stroke patients according to differences in immersion. Design: A randomized controlled trial. Methods: A total of 20 stroke patients, with 10 in an immersive virtual reality training programs group (IVRG) and 10 in a non-virtual reality training programs group (NVRG) were randomly assigned to exercise three times a week for 6 weeks. EEG was measured for 2 minutes using DSI-24. Results: The intra-group difference in relative alpha waves of brain waves was not significant for both groups, and the between-group difference was not significant. Differences in EEG relative beta waves in the experiment group were significant in the Fp1, Fp2, Cz, C3, C4, P3, and O2 in the experiment group, and significant in the Cz and O2 in the control group. As a result of comparing the differences between each group before and after, there was a significant difference in the Fp1 area. Conclusion: Virtual reality training programs based on differences in immersion were found to have a positive effect on EEG. Therefore, it is believed that a virtual reality training program based on differences in immersion can be provided as a clinical intervention method for EEG.

Background: The Nordic hamstring exercise is effective as a representative exercise for strengthening eccentric contraction that can activate the hamstring at high levels, improve eccentric contraction strength and ability, and significantly reduce injury rates. Objectives: To investigated a comparison with the lunge exercise to determine the effect of the Nordic hamstring exercise on muscle activity and balance ability in a sample of adult amateurs and football players. Design: Randomized controlled trials. Methods: The subjects of the study were stratified samples of 28 professional and amateur football players and two groups (Nordic hamstring group and lunge group) of 14 people each were studied. Surface electromyography using, was performed to measure the hamstring muscle activity, and the good morning exercise was selected as the measurement exercise. For balance ability, the surface area ellipse and length were measured with BioRescue, while for static balance, the posture of closing the eyes and single-limb standing was measured, and for dynamic balance the one-legged squat was measured. Results: The %MVIC of the semitendinosus and the biceps femoris improved in the Nordic hamstring exercise group and showed statistically significant increase (P<.05). The static and dynamic balance improved in the Nordic hamstring exercise group and showed statistically significant decrease (P<.05). Conclusion: The Nordic hamstring exercise can be useful as an exercise to improve the hamstring muscle activity and balance ability of professional and amateur football players.

해사영어는 선박 운항, 해양 안전, 선내 의사소통 및 선외 교신을 위해 설계된 특수한 영어 언어체계이다. 국제해사기구 STCW(선원의 훈련, 자격증명 및 당직근무의 기준에 관한 국제협약)에 따르면 국제항해에 종사하는 항해사가 되기 위해서는 SMCP를 포함한 해사영어 대한 충분한 이해가 수반되어야 한다. 본 연구는 음성인식, 번역, 단어 기입 등 유형의 해사영어시험을 통하여 학생들 의 해사영어 활용 능력을 측정하고 플랫폼 사용에 따른 시험 점수 향상 정도, 나아가 초임항해사로 나가기 위하여 요구되는 해사영어 시험 플랫폼 활용 시간 등을 조사하고자 하였다. 실험은 먼저 초기 시험을 통해 학생들의 일반영어능력과 SMCP 활용 능력에 대한 연 관성을 조사한 후, 중간 시험 및 최종 시험을 통해 플랫폼 활용에 대한 점수 향상 정도, 응시시간 변화 등 요인을 측정하였다. 초기 시 험을 통해 개인 요인(예: 토익 점수, 본인 스스로에 대한 영어능력 평가)에 따른 그룹 간 해사영어시험 점수에 유의한 차이가 있음을 확인하였으며, 중간시험 및 최종시험을 통해 플랫폼 활용이 유의한 시험점수 향상으로 이어졌음을 확인하였다. 해당 연구는 해사 교육 분야에 다양하게 적용할 수 있는 학습 플랫폼 활용 효능을 조사하였으며 향후 해사영어 교육 외 그 범위를 넓혀 활용될 수 있을 것으 로 사료된다.

The purpose of this study is to analyze the formative characteristics of women’s costumes among the Regency era’s elite in the television drama Bridgerton (2020). Its methodology investigates the socio-cultural background and literature on clothing in the Regency era. It also analyzes the formative elements of Daphne’s costumes (of the Bridgerton family) and Penelope’s costumes (of the Featherington family) representing the upper class. The study reveals that women’s costumes had a tubular silhouette consisting of a low neckline, high waistline, and short puffed sleeves. The series expressed well the Regency-era costumes, which were influenced by Neoclassicism and characterized by silk materials, shawls, gloves, belts, a reticule, and hairstyles. Among the formative elements, the Bridgerton and Featherington families’ costumes showed distinct differences in color, materials, patterns, accessories, and hairstyles. Daphne’s costumes were intelligent and elegant in pastel-toned blues and had small patterns. She carried small accessories and had a natural curled hairstyle. In contrast, Penelope wore decorative and splendid styles in intense colors and large patterns. Her accessories were large and colorful, and she had a strong curled hairstyle. These costumes express the Bridgerton family as aristocratic and the Petringer family as flashy, thereby distinguishing the two families. These research results will be presented as basic data for producing drama costumes in the 19th century to help complete the drama.