Demand for research on the use of hydrogen, an eco-friendly fuel, is rapidly increasing in accordance with global environmental problems and IMO environmental regulations in the shipbuilding and marine industry. In the case of hydrogen, similar to liquefied natural gas, it has a characteristic that its volume decreases hundreds of times during phase transformation from gas to liquid, so it must be stored in a tank in the form of liquefied hydrogen for transport efficiency. The material of the liquid hydrogen tank is selected in consideration of mechanical properties and hydrogen embrittlement at cryogenic temperatures. In this study, welding research was conducted on STS316L material, which was most commonly used in the space industry. In this study, flux cored arc welding was performed under 4 welding conditions to derive the optimal welding conditions for STS316L material, and then mechanical properties of the welded part were compared and analyzed.
To minimize and prevent the increasing fire and personal injury, the domestic firefighting organizations are making continuous efforts to strengthen the response system and safety standards. "Fire Reduction Program" has been prepared to reduce the outbreak of fire up to 20% in the next 10 years, and the analysis of fire sources should be done and its countermeasures also should be done accordingly. Therefore, the management status, the improvement tasks, and the limitations of the implementation plan are reviewed and studied so that the implementation and goal of the "Fire Reduction Policy" can be achieved
본 연구에서는 사회, 경제, 교육, 제도 등의 변화 분석을 통해 세계화와 미래화를 위 한 노동시장의 변화에 대해 예측하고 미래 산업의 효율적 운영 관리방안 마련 및 시 스템적 접근방법을 통한 무한 경쟁체제의 경쟁력 강화 방안 마련하고자 한다. 본 연구 에서 제시하는 산업분석에 대한 계산은 근거와 신뢰성에 대한 의견이 제시될 수 있으 나 본 연구에서 고려하고자 한 것은 산업 간의 포지셔닝 계수라는 것을 언급하고자 한다. 결국 포터가 제시한 방법론을 적용은 각 산업 간의 포지셔닝 결정을 위한 상대 적 가치 계산이지 산업에 절대적 계산이 아니다.
본 연구는 통계청(2009-2010)의 국가 산업 표준을 기본으로 생애주기를 고려한다. 생애주기에 대한 변수는 경제활동인구와 사업체 동향을 분석하여 실시하며 이에 따른 자격은 산업과 직업에 관련하여 해당하는 자격의 매칭 테이블을 기준으로 그 자격의 가치를 평가하는 방법을 선택하였다. 산업에 대한 분석은 일반적으로 활용되고 있는 경영기법에 따라 그 절차를 수용하고 관련변수를 응용 또는 적용하도록 하였다.
Nowadays, logistics parks are no longer simply storage areas but rather the center of corporate supply activities. As the importance of logistics increases, so does the value of logistics related facilities. Unlike the past, in which the sole purpose of logistics services was the spatial movement of materials through transportation, modern logistics are required to carry out functions such as timely adjustment and swift adaptation to changing patterns, and this leads to the emphasis on forming logistics parks. Logistics parks make profits using the efficiency of time and space. Such logistics parks play an important role in a corporation creating operating profits as well as acting as a method of alternative investment for individuals. Logistics parks no longer simply store materials, but have become a place that plays an important role in various areas of corporate and individual activities, and thus the analysis of the selection of the location of logistics parks and the related characteristics is extremely important. There are many existing studies on the selection of locations of logistics parks but work on the factors related to location selection by industry seem lacking. As such, in the course of this study we have used preceeding studies to draft a questionnaire on which selection factors affect the selection of logistics park location in different industries and conducted empirical analysis of the questionnaire results to uncover the factors that affect the selection of the locations of logistics parks in different industries.
본 연구에서는 정수처리용 탄소섬유 정밀여과막 및 광촉매의 혼성공정에서 물 역세척 주기(FT) 변화의 영향을 알아보고, 알루미나 한외여과막을 사용한 기존의 결과와 비교하였다. 물 역세척 시간(BT)는 10초로 고정한 채, FT를 2~10분으로 변화시키면서, 그 영향을 180분 운전 후 막오염에 의한 저항(Rf), 투과선속(J)과 총여과부피(VT) 측면에서 고찰하였다. FT가 감소할수록, Rf는 감소하고 J는 증가하여 알루미나 한외여과막을 사용한 기존의 결과와 동일하였다. 탁도의 처리효율은 99.2% 이상으로 높게 나타났으며, FT 변화에 의한 영향이 보이지 않아 기존의 결과와는 달랐다. 한편, 유기물의 처리효율은 NBF 조건에서 65.6%로 가장 낮았으며 FT가 감소할수록 증가하여 기존의 결과와 역시 다른 현상을 보였다. 이런 차이를 보인 것은 세라믹 분리막의 재질의 차이로 인한 막오염 현상이 다른 기작을 보이기 때문인 것으로 판단된다.
This essay talks about research of robust design for quality improvement of production procedure of Wet Etchant. It suggested the optimum design method in consideration of specific capability value that is the way to maximize the quality of product in the production system by using Daguchi parameter design method while finding factors affecting product quality with analysis of production system of product A from producer D. Also, it set long term of 6months as noise factor and let it to be the robust design that can find the optimum condition of control factor that is dull to the changes of each month, that is the change in noise factor. The control factor which affects the product quality is decided as combination method, temperature of raw material, combination time and as there are too many possibilities for combination methods, we performed 4 methods first based on previous research data then derived three ways with product that passed SPEC and set as the factor. As a result of application of optimum production procedure suggested in this essay to the actual production process with its standardization, there was a effect of drop of more than 10particles in comparison to the particle number of previous product and also it brought the effect that resulted the stable number of particle of under 30 that is what the client company suggested.
Illegal transportation act using a private truck cases indigested freight market. Moreover it incurs social and economic damage. There are some remedy for this problem that is reintroducing suspension of the service law, creating the law to punish client who have the goods which is delivered and improving transportation environment.