This study aims to analyze the traditional attire of four ethnic minority groups in Northeastern China: Daur, Ewenki, Oroqen, and Hezhen, considering their natural environment, lifestyles, and cultural influences. A literature review of academic papers, books, and online resources was conducted, along with indirect investigations through artifacts. The Daur people, being equestrian, have garments with deep slits, vibrant colors, and elaborate decorations. The Ewenki people wear clothes made of fabric in the summer and primarily deer skin in the winter, and their clothing is simple and not flashy. The Oroqen people’s clothing typically has slits at the front, back, or on both sides, and they wear a waist belt. The Hezhen people, an ethnic group that primarily hunts and fishes, wear two-piece clothing with a hip-length top and pants or other fur-trimmed garments. All groups incorporate symbolic patterns influenced by Shamanism, along with animal headgear and leather shoes. We observed that the traditional costumes of ethnic minority groups in Northeastern China share many commonalities in form, but there are detailed differences in material, shape, color, and decoration due to unique geographical and climatic characteristics as well as differences in livelihood. Additionally, the structure of clothing varies depending on each tribe’s shamanistic practices and lifestyle.

The purpose of this study is to classify the body types of obese men in their 50–60s and compare them with those of obese middle-aged men in their 30–40s. The 3D anthropometric data of obese men aged 50 to 60 years from the 6th Size Korea. The data are analyzed using SPSS 25.0 for Windows, and descriptive statistics, χ2 test, correlation analysis, and cluster analysis are used to classify obese body types. As a result of the study, five factors are extracted to determine body types, which are classified into three obese body types through cluster analysis. 1) a large physique and consequently large circumference and height; 2) A short upper body length, short height, and thick belly; 3) the lowest rate of obesity and relatively flat abdominal curve. For the 30–40s group, Type1 showed the highest rate at 55.6%, whereas for the 50s group, Type3 showed the highest rate at 49.3%, and for 60s group, Type2 showed the highest rate at 41.2%. The classification accuracy of the discriminant function for each type is 94.7%, indicating relatively high accuracy. Furthemore, the recently changed obese body type are analyzed by comparing it with the 3D anthropometric data of 8th Size Korea, which will contribute to the utilization of basic data for manufacturing apparel for obese men.

The purpose of this study was to examine the current satisfaction levels with nurse uniforms at Taizhou General Hospital in China and to find areas for improvement in order to develop nurse uniforms with improved comfort, fit and convenience. To investigate satisfaction with nurse uniforms, a survey was conducted of 150 nurses. The general characteristics of the nurses, uniform conditions, feelings of satisfaction, fit, preferred designs, inconvenient aspects of the uniforms, and areas for improvement were analyzed. Eight materials of cotton/polyester blended fabrics were selected according to Chinese nurse uniform regulations, and the physical properties of the materials were tested along with the materials used in current nurse uniforms. Four new nurse uniforms with increased aesthetics, functionality, and comfort were developed based on the survey results. Materials with excellent absorption, moisture permeability, and ventilation were used as main fabrics. According to the preferred designs of nurses at Taizhou City General Hospital, China, 4 types of nurse uniforms designed, consisting of design 1 (shirt and pants), design 2 (shirt and pants), design 3 (dress), and design 4 (shirt and skirt). The new nurse uniforms offered better functionality with an improved fit at the armpits, waist, hips, and knees based on product measurements.

본 연구는 소셜 네트워크 서비스 중 한 유형인 플리커를 이용하여 궤적 데이터를 생성하고, 서울을 방문한 관광객의 이동 특성을 분석하였다. 연구에는 2015년 1월 1일 부터 2017년 12월 31일까지 서울을 방문한 1,476명 관광객이 게시한 플리커 사진 39,157건을 활용하였다. 연구기간 내 서울을 방문한 관광객은 1회 방문시 평균 5.12일을 체류하며, 약 1.27회 방문한 것으로 나타났다. 서울방문 관광객의 첫 방문지는 종로･남산, 신촌･홍대, 이태원 순으로 나타났으며, 주 목적지는 종로･남산이며 주로 인접 지역으로 이동하는 것으로 나타났다. 본 연구에서 활용한 데이터와 방법론은 관광행태 분석을 효율화하고, 다각적 분석을 가능하게 하는데 기여할 것으로 판단된다.

This study aims to contribute to the development of sports wearables. It was conducted by a convergence team of professionals in the fashion industry, kinesiology and sports studies, and computer science and engineering. The purpose of the current study was to design and develop a fabric-type fitness band for a sensor to measure acceleration during jump rope exercises. Computer science and engineering professionals developed the Arduino board and sensor, kinesiology and sports studies provided the necessary exercise protocol, and the fashion industry professionals developed the band. First, a fitness band preference survey was completed by men and women between the ages of 20 and 50. Typical uses of the band included tracking exercise amount as measured by the number of steps taken and calories burned. Strap watch closure, a single color and achromatic color, and soft and smooth touch materials were preferred as band design. Second, two fabric-type fitness bands were designed and developed. Design 1 had a 3-dimensional pocket for the sensor, bright blue color, and stretch binding around the edges and for a loop. Design 2 had a flat pocket for the sensor, achromatic color, mesh binding around the edges and two metal loops. Both designs had Velcro as a closure. Third, wear testing of both bands with the sensor were conducted of 15 women in their 20s. They wore the bands during jump rope exercises. Both bands generally satisfied the participants. The Design 2 band was slightly more satisfying than the Design 1 band.

The study purpose was to investigate the jacket-fit satisfaction level of men in their 20s and 30s, using body-scanning data and a questionnaire. Thirty-five men were scanned using a 3D body scanner. The participants were divided into three groups (Small, Medium, and Large) based on their chest-circumference measurement. Their levels of satisfaction with the fit of their tailored jacket were compared by group. Chest, waist, and hip circumferences increased substantially as group size increased. The M-group was mostly satisfied with all body-site views. The S-group was especially dissatisfied with height, back width, waist circumference, and upper-arm circumference. The L-group was especially dissatisfied with waist circumference and hip circumference. The majority of the participants preferred the jacket closely fitted to their body. More than half of the participants thought finding a jacket of suitable size was difficult. When purchasing ready-to-wear jackets, the S-group and the M-group considered shoulder width important, while the L-group considered chest circumference the most important area. When evaluating the fit of ready-to-wear jackets, the L-group evaluated chest circumference, back width, and waist circumference as poor fits. The M-group evaluated sleeve length and shoulder width as poor fits, and the S-group agreed with respect to sleeve length. Body-satisfaction levels and matching jacket-satisfaction levels differed by body-size group, as did areas that need improvement. The conclusion is that size-group analysis using 3D body scanning can be utilized effectively for jacket-fit analysis. The findings of the current study can be applied to improving jacket fit among young male consumers.

Firefighting hoods protect the head, face, and neck areas of officials while they perform firefighting services. The purpose of this study is to investigate the head size of Korean firefighting officials in order to establish the dimensions necessary to construct firefighting hoods. A total of 98 male firefighting officials participated in this study and 11 body dimensions, necessary for the construction of firefighting hoods, were measured. The data collected from the firefighting officials were compared to the general adult male data from the Size Korea national anthropometric study. The heights, weights, head circumferences, head heights, and bitragion arcs of the firefighters were significantly larger than those of general adult males, which shows that firefighting officials generally have larger body and head sizes than general adult males. Based on the results of Pearson's correlation coefficients, head circumference and head height were judged to be the important measurements for the construction of the firefighting hoods. Thus, these two measurements were chosen as the basic dimensions of the cross tabulation analysis. As a result, head circumferences of 57.00~60.99cm and head heights of 23.00~25.99 cm were found to be important measurement ranges among the firefighters. This study is expected to be used as the basis for the creation of firefighting hoods that help to ensure the safe rescue activities for firefighting officials.

The purpose of this study was to classify the upper torso body types of obese Korean adult women using the 7th Korea National Anthropometric Study data and compare the body type differences according to three age groups: 20s～30s, 40s～50s, and 60s. A total of 548 adult women whose BMI was in the obese range of 25 or higher and whose age ranged from 20s to 60s were selected from the anthropometric database. Twenty-nine body measurements related to torso and arm areas important for torso and sleeve pattern development were chosen. Five drop values by differences between bust, waist, and hip circumferences were also chosen for analysis. The number of obese women increased with age. The results revealed seven factors according to the factor analysis and three obese body types based on the cluster analysis. Body type 1 (47.3% of obese women) was characterized by narrow shoulders, a small or medium torso, and a straight waist. Body type 2 (42.4% of obese women) was characterized by a defined waist and a larger lower torso than upper torso. Body type 3 (10.3% of obese women), the largest obese body type among the three types, was characterized by a large bust, large abdomen area, and long upper torso. Women in their 20s to 30s were most likely to have body type 2, women in their 40s to 50s were evenly distributed between body types 2 and 3, and women in their 60s were most likely to have body type 1.

The purpose of this study was to investigate preferences and satisfaction levels in maternity and nursing brassiere. A questionnaire was conducted on 302 women from their 20s to 40s who had breastfeeding experience. The questionnaire included questions on participant demographics, purchase behavior, and design preference and satisfaction levels. The majority(98.0%) of the participants had had experience using maternity/nursing brassieres. More than 90% of the participants agreed with the need for maternity/nursing brassieres distinct from regular ones. Shopping online was the most common means of purchasing them. The most and second-most owned fastener types were the detachable shoulder belt type and inside-cup type, respectively. The most selected reason for purchasing or wearing a maternity/nursing brassiere was the convenience of donning and doffing the brassiere during breastfeeding. Participants had lower satisfaction levels with how well maternity/nursing brassieres support and center the breasts, and with the variety of designs available on the market. Respondents indicated that fasteners for breastfeeding should be developed to provide comfort and convenience for breastfeeding. Wearing comfort was reported as the most important factor in purchasing selection, both during the pregnancy and breastfeeding periods. No-wire, back closure, full-cup, U-shape wing, and skin color were the most preferred design styles.

The purpose of this study was to investigate preferences and satisfaction levels in maternity and nursing brassiere. A questionnaire was conducted on 302 women from their 20s to 40s who had breastfeeding experience. The questionnaire included questions on participant demographics, purchase behavior, and design preference and satisfaction levels. The majority(98.0%) of the participants had had experience using maternity/nursing brassieres. More than 90% of the participants agreed with the need for maternity/nursing brassieres distinct from regular ones. Shopping online was the most common means of purchasing them. The most and second-most owned fastener types were the detachable shoulder belt type and inside-cup type, respectively. The most selected reason for purchasing or wearing a maternity/nursing brassiere was the convenience of donning and doffing the brassiere during breastfeeding. Participants had lower satisfaction levels with how well maternity/nursing brassieres support and center the breasts, and with the variety of designs available on the market. Respondents indicated that fasteners for breastfeeding should be developed to provide comfort and convenience for breastfeeding. Wearing comfort was reported as the most important factor in purchasing selection, both during the pregnancy and breastfeeding periods. No-wire, back closure, full-cup, U-shape wing, and skin color were the most preferred design styles.

The purpose of this study was to investigate students’ satisfaction with, perceived ease of movement of, and perceived fit of high school girls’ uniforms according to the uniform design. “P” high school, with a one-piece dress-type uniform, and “H” high school, with a two-piece type uniform, were selected for this study. Sixty-five female students from each school participated in the study. The questionnaire was composed of 21 questions about the school uniforms’ purchase behavior, design, fit, ease of movement, and modification and participants’ demographic information. Students from both schools were generally satisfied with the uniform design. However, in the open-ended response section, many “P” high school students responded that the fact that the one-piece dress pulled up when sitting or raising the hand made it uncomfortable. On the other hand, “H” high school students responded that the skirt was uncomfortable, because it left the body or underwear exposed when the wind blew due to the many pleats in the skirt. In the assessment of the ease of movement, “P” high school students were more likely to describe the uniform as uncomfortable than “H” high school students. Many students responded that they modified their school uniforms, and the length of the skirt and one-piece dress was the main part that was modified. This study suggests that growing female high school students are unsatisfied with the school uniforms’ design and fit. Additionally, the perceived fit and satisfaction levels depend on the uniform design.

기존 연구들에서는 사람들이 길고 가는 원통형 용기의 부피를 짧고 넓은 원통형 용기의 부피보다 크다고 지각한다 는 점을 밝혀왔다(예, Raghubir & Krishna, 1999; Wansink & Van Ittersum, 2003). 본 연구에서는 이러한 신장 효과 가 상자형 용기에서는 반대로 나타나는 현상을 밝히었다. 가설은 상자형 용기의 행동 유도성으로부터 도출되었다. 두 개의 연구에서 참가자들은 짧고 넓은 사각 상자 용기의 부피가 길고 가는 사각 상자 용기의 부피보다 더 크다고 지각하였다. 이 효과는 자극의 제시 방법(그림, 연구 1; 실제 모형, 연구 2)이나 선택지 유형(둘 중 큰 것을 고르는 선택지, 연구 1; 둘 중 큰 것을 고르거나 같은 경우를 고르는 선택지, 연구 2)에 상관없이 일관되게 나타났다. 또한, 서로 다른 문화적 배경을 지닌 참가자 집단(미국인 참가자, 연구 1; 한국인 참가자, 연구 2)에서 동일한 효과가 나타 났으며, 용기 안의 내용물이 물(연구 1)인 경우뿐만 아니라 전반적인 액체 음료(연구 2)라고 설정했을 때에도 같은 결과가 나타났다. 본 연구에 대한 이론적이고 실제적인 함의가 논의되었다.

One of the most important elements in games is 'fun'. According to the Flow theory, when the proper ability and challenge are combined at the optimum shape, game users can reach the stage of 'fun' with being fully absorbed. MMORPG satisfy the users making them have fun, using tools such as vicarious satisfaction by various role performances of various occupational clusters, self-display and diversity of the story through many quests. This study investigates the composition and characteristics of MMORPG, provide a model which calculates game balance according to the occupations and roles of the game characters and verify the validity by applying this model into the actual game. MMORPG is basically based on human behaviors. That is to say, it is possible to make balance evaluation model because the abilities needed for battle and adventure are within our imagination. For example, in the battle, 'power' is needed basically, 'speed' is also needed for quick movement and skillful technique, 'intelligence' and 'wisdom' are needed for more difficult techniques, 'strength' is needed to live on and 'charisma' is needed to make relationships. Thus, general six abilities are available, and based on these, by itemizing the contents composing the battle, the study attempted to provide the final battle balance evaluation model. Therefore, in order to make balance among these offenses and defenses and to compare the figures by unified ones, ICF (Integrated Comparative Figures) is hereby defined.

본 연구에서는 쌀 이축 압출 성형 중 반죽 스크루의 배열의 변화가 압출 시스템 변수 및 압출물의 물리화학적 특성에 미치는 영향을 분석하였으며 수행한 결과는 다음과 같다. 스크루 배열 변화시 조리 구간에 배열한 반죽 스크루의 각도 및 길이의 변화에 따라 충진도 및 입자크기를 관찰하면서 압력형성과 비기계적 에너지 소요 변화와 관계를 파악할 수 있었다. 충진도 및 압력은 config. 1에서 고전단 처리가 가능한 config. 5로 증가함에 따라 규칙적으로 증가되는 결과를 나타내었으며, 고전단력이 발생하는 config. 5에서 충진길이는 115 mm의 가장 높은 값을 나타내었으며 압력은 5,748.76 kPa로 가장 높은 갚을 형성하였다. 입자 크기 및 비기계적 에너지 관계는 압력은 config. 1에서 config. 5로 증가함에 따라 비기계적 에너지 증가되었으며, 쌀의 입자 크기는 감소되었다. Config. 5에서 비기계적 에너지 값이52.80 kJ/kg이며 입자크기는 0.22에서 0.28 mm 범위로 감소되었다. 팽화율, 수분용해지수, 전분 소화율은 config. 1에서 고전단력 처리가 가능한 config. 5로 증가함에 따라 규칙적으로 증가되는 결과를 나타내었다. 팽화율은 config. 1에서 1.85를 나타내었으나 config. 5에서 충진 길이 및 압력 증가의 영향으로 3.06으로 증가되었다. 수분용해지수와 전분 소화율도 원재료에서 각각 1.36%, 10.53%을 나타내었으나 config. 5에서 입자크기 감소 및 SME 증가의 영향으로 수분용해지수는 22.08%, 전분소화율은 16.57%로 증가되었다. 본 연구를 통하여 스크루 배열 변화는 시스템 변수 및 물리화학적 특성에 영향을 미치는 중요한 공정 변수임을 확인하였다. 압출 성형공정에서 스크루 배열 변화에 따라 저전단에서 고전단 공정을 제어 할 수 있으며, 사출구 압력, 비기계적 에너지, 압출물의 물리화학적 특성 등의 변수를 결정하는데 중요한 역할을 한다는 것이 이 연구를 통하여 확인할 수 있었다.

본 연구에서는 영양과 건강, 그리고 편의성까지 고려한 즉석식품 형태의 쌀미음을 제조하였다. 제조된 쌀미음 분말의 영양성분 구성비를 일반성분 분석을 통하여 분석 하였고, 과립공정에 따른 재수화능의 향상을 연구하였다. 과립분말은 혼합분말보다 지방함량과 단백질 함량이 각각 0.9, 1.9% 높게 나타난 반면, 탄수화물 함량은 상대적으로 3.2% 낮게 나타났다. 과립분말의 단백질 조성은 71.1-118.5 g으로 1일 권장 단백질 섭취량 45-55 g보다 많았는데, 이는 일반적인 환자식이 지니는 공통적인 특성이다. 분말 입자의 침강 속도를 보여주는 분산성의 경우 과립분말(93.7%)은 혼합분말(77.0%) 보다 높게 나타났고, 재수화에 걸리는 시간도 과립분말(122.3 초)이 혼합분말(305.3 초)보다 빨랐으며 이들 결과는 과립공정이 분말의 재수화능을 향상시켜 주었음을 보여준다. 호화쌀가루를 이용한 쌀미음은 기존의 우유 단백질 위주의 환자식을 곡류로 대체하며 영양강화 쌀 가공제품의 개발에 의미가 있다.

Angelicae gigantis Radix (dried root of Angelica gigas) including major bioactives such as decursin and decursinol angelate provides rich flavors and several healthy benefits. Recent studies have shown that ultrafine powders of herbal medicines provide better physical properties and biological activities. Thus, ultrafine Angelica powder was added into the oligosaccharide syrup to provide flavors and healthy benefits in this study. Angelicae gigantis Radix was pulverized into d(0.1) = 3.220, d(0.5) = 7.822, and d(0.9) = 7.817 μm respectively using an air-flow mill. The ultrafine Angelica powder was added into the oligosaccharide syrup process with different ratios of water to oligosaccharide syrup at 1:5, 1:8, 1:11, and 1:14. The physicochemical properties such as viscosity and bulk density were measured. The Stokes’ law was applied to predict the sedimentation velocity of the added Angelica powder in the syrup. The Angelica syrup prepared in this experiment showed good stability since the Angelica particles precipitated down slowly. The ratio of water to oligosaccharide syrup at 1:11 showed the optimal preparation in terms of the stability and the viscosity. The ultrafine-sized herbal powders such as Angelicae gigantis Radix have potentials for various food and pharmaceutical applications.

The hydrogen embrittlement susceptibility of high strength TRIP/TWIP steels with the tensile strength of 600Mpa to 900Mpa grade was investigated using cathodically hydrogen charged specimens. TWIP steels with full austenite structure show a lower hydrogen content than do TRIP steels. The uniform distribution of strong traps throughout the matrix in the form of austenite is considered beneficial to reduce the hydrogen embrittlement susceptibility of TWIP steels. Moreover, an austenite structure with very fine deformation twins formed during straining could also improve the ductility and reduce notch sensitivity. In Ubend and deep drawing cup tests, TWIP steels show a good resistance to hydrogen embrittlement compared with TRIP steels.

High temperature dielectric constants of the various ceramic materials have been measured using cavity perturbation method. The measurements were applied to refractory, traditional and fine ceramic powder compacts from room temperature to . Calibration constant in the equation suggested by Hutcheon et al., was determined from the dielectric constants of reference specimen (teflon and alumina) at room temperature. From these results, informations on the refectory materials were obtained for the microwave kiln design and understanding of the microwave heating effects of ceramics have been improved.