The records system is believed to have started in Italy in the 14th century in line with trade developments in Europe. In 1491, Luca Pacioli, a mathematician, and an Italian Franciscan monk wrote the first book that described double-entry accounting processes. In many countries, including Korea, the government accounting standards used single-entry bookkeeping rather than double-entry bookkeeping that can be aggregated by account subject. The cash-based and single-entry bookkeeping used by the government in the past had limitations in providing clear information on financial status and establishing a performance-oriented financial management system. Accordingly, the National Accounting Act (promulgated in October 2007) stipulated the introduction of double-entry bookkeeping and accrual accounting systems in the government sector from January 1, 2009. Furthermore, the Korean government has also introduced International Financial Reporting Standards (IFRS), and the System of National Accounts (SNA). Since 2014, Korea owned five national accounts. In Korea, valuation began with the 1968 National Wealth Statistics Survey. The academic origins of the valuation of national wealth statistics which had been investigated by due diligence every 10 years since 1968 are based on the 'Engineering Valuation' of professor Marston in the Department of Industrial Engineering at Iowa State University in the 1930s. This field has spread to economics, etc. In economics, it became the basis of capital stock estimation for positive economics such as econometrics. The valuation by the National Wealth Statistics Survey contributed greatly to converting the book value of accounting data into vintage data. And in 2000 National Statistical Office collected actual disposal data for the 1-digit asset class and obtained the ASL(average service life) by Iowa curve. Then, with the data on fixed capital formation centered on the National B/S Team of the Bank of Korea, the national wealth statistics were prepared by the Permanent Inventory Method(PIM). The asset classification was also classified into 59 types, including 2 types of residential buildings, 4 types of non-residential buildings, 14 types of structures, 9 types of transportation equipment, 28 types of machinery, and 2 types of intangible fixed assets. Tables of useful lives of tangible fixed assets published by the Korea Appraisal Board in 1999 and 2013 were made by the Iowa curve method. In Korea, the Iowa curve method has been adopted as a method of ASL estimation. There are three types of the Iowa curve method. The retirement rate method of the three types is the best because it is based on the collection and compilation of the data of all properties in service during a period of recent years, both properties retired and that are still in service. We hope the retirement rate method instead of the individual unit method is used in the estimation of ASL. Recently Korean government’s accounting system has been developed. When revenue expenditure and capital expenditure were mixed in the past single-entry bookkeeping we would like to suggest that BOK and National Statistical Office have accumulated knowledge of a rational difference between revenue expenditure and capital expenditure. In particular, it is important when it is estimated capital stock by PIM. Korea also needs an empirical study on economic depreciation like Hulten & Wykoff Catalog A of the US BEA.

ASL estimation of public building is based on how appropriate the maximum age of the asset is derived based on the age record of the asset in the statistical data owned by public institutions. This is because we get a 'constrained' ASL by that number. And it is especially true because other studies have assumed that the building is an Iowa curve R3. Also, in this study, the survival rate is 1% as the threshold value at which the survival curve and the predictable life curve almost coincide. Rather than a theoretical basis, in the national statistical survey, the value of residual assets was recognized from the net value of 10% of the acquisition value when the average service life has elapsed, and 1% when doubling the average service life has elapsed. It is based on the setting mentioned above. The biggest constraint in fitting statistical data to the Iowa curve is that the maximum ASL is selected at R3 150%, and the 'constrained' ASL is calculated by the proportional expression on the assumption that the Iowa curve is followed. In like manner constraints were considered. First, the R3 disposal curve for the RCC(reinforced cement concrete) building was prepared according to the discarding method in the 2000 work, and it was jointly worked on with the National Statistical Office to secure the maximum amount of vintage data, but the lacking of sample size must be acknowledged. Even after that, the National Statistical Office and the Bank of Korea have been working on estimating the Iowa curve for each asset class in the I-O table. Another limitation is that the asset classification uses the broad classification of buildings as a subcategory. Second, if there were such assets with a lifespan of 115 years that were acquired in 1905 and disposed of in 2020, these discarded data would be omitted from this ASL calculation. Third, it is difficult to estimate the correct Iowa curve based on the stub-curve even if there is disposal data because Korea has a relatively shorter construction history, accumulated economic wealth since the 1980’s. In other words, “constrained” ASL is an under-estimation of its ASL. Considering the fact that Korea was an economically developing country in the past and during rapid economic development, environmental factors such as asset accumulation and economic ability should be considered. Korea has a short period of accumulation of economic wealth, and the history of 'proper' architectures faithful to building regulations and principles is short and as a result, buildings 'not built properly' and 'proper' architectures are mixed. In this study, ASL of RCC public building was estimated at 70 years.

Many countries around the world are pursuing various support policies to foster start-ups national widely in order to secure new economic growth engines in the era of the Fourth Industrial Revolution. The South Korean government announced the diffusion strategy for the 2’nd round Start-up Boom in March 2019 and is promoting the support policies for start-up incubating by various programs. Many incubators and startup accelerators operate various kinds of programs to foster start-ups using government financial supports. The purpose of this study is to investigate the effects of entrepreneurship and technical capability of entrepreneurs as the internal factors of the technology-based start-ups and the effects of programs supported by the government as an external factor on the corporate performance of a start-up company, and the mediating effects of core competence of start-ups were analyzed using SPSS and AMOS. The results show that the entrepreneurship, technical capability and the programs supported by incubators or accelerators had no direct effects on the corporate performance of a start-up, but the core competence of the company had complete mediating effects. In addition, the type of program supported by the comprehensive accelerator programs or the marketing supports had effects on the core competence rather than simple financial supports. Lastly, the policy proposals for incubating program support and future research directions along with the limitation are suggested.

The South Korean government is actively assisting the supply of the smart factory solutions to SMEs (Small & Medium-sized Enterprises) according to its manufacturing innovation 3.0 policy for the smart manufacturing as the 4th industrial revolution era unfolds. This study analyzed the impacts of the smart factory solutions, which have been supplied by the government, on the companies performances. The effects of the level of smart factory and the operation capabilities for the smart factory solutions on company performances, and the mediating effects of manufacturing capabilities have been analyzed using SPSS and AMOS. The data for this survey-based study were collected from the SMEs which implemented the smart factory solutions since 2015. The results show that the level of smart factory solutions adopted and operation capabilities for the smart factories do not have direct effects on the company performances, but their mediating effects on the manufacturing capabilities matter and the manufacturing capabilities effect directly on the company performances. In addition significant factors boosting the operation capability for the smart factory and the levels of the smart factory solutions are identified. Finally, the policy direction for enhancing the smart factory effects is presented, and the future research directions along with the limitations are suggested.

Ensuring the quality of molds is one of the major issues in mass production. In general, securing the quality of the molds is achieved by repeating grinding and die spotting after machining the molds based on engineer’s decision. However, this heuristic method is affected by the engineer’s skill and working environment. Therefore, a lot of time and resources are needed in order to ensure quality. In this study, ensuring the quality of molds using grinding map which is generated using automatic measurement is proposed. An automatic measuring system based on CMM (Coordinate Measuring Machine) is developed for measuring the molds. This system generates the measurement path automatically using the 3D CAD model of products. CAD (Computer- Aided-Design), CAM (Computer-Aided-Manufacturing), and CAQ (Computer-Aided-Quality) technology is integrated using DMIS (Dimensional Measuring Interface Standard) format in the automatic measuring system. After measuring the molds, a grinding map is generated using the gap between the CAD model and measured values of mold. The grinding map displays the machining tendency and the required amount of grinding with values on a 3D map. Therefore, the quality of molds can be ensured with exactness and quickness based on the grinding map. This study shows that integrating the planning, measuring, and analyzing based on computer technology can solve the problem of quality assurance of mold using the proposed method, therefore the productivity can be increased.

The setting of values on door hinge mounting compensation for door assembly tolerance is a constant quality issue in vehicle production. Generally, heuristic methods are used in satisfying appropriate door gap and level difference, flushness to improve quality. However, these methods are influenced by the engineer's skills and working environment and result an increasement of development costs. In order to solve these problems, the system which suggests hinge mounting compensation value using CAE (Computer Aided Engineering) analysis is proposed in this study. A structural analysis model was constructed to predict the door gap and level difference, flushness through CAE based on CAD (Computer Aided Design) data. The deformations of 6-degrees of freedom which can occur in real vehicle doors was considered using a stiffness model which utilize an analysis model. The analysis model was verified using 3D scanning of real vehicle door hinge deformation. Then, system model which applying the structural analysis model suggested the final adjustment amount of the hinge mounting to obtain the target door gap and the level difference by inputting the measured value. The proposed system was validated using the simulation and showed a reliability in vehicle hinge mounting compensation process. This study suggests the possibility of using the CAE analysis for setting values of hinge mounting compensation in actual vehicle production.

First Mover Advantage is already well known. It is when a company gains a position in a certain market or industry, or when it establishes a strong entry barriers through a distribution channel or a monopoly of resources. It is a concept that has been attracting attention for a long time in marketing and strategy. However, although it is possible for the starter to enjoy these various benefits, it is also true that there is a corresponding price. Therefore, the risks and costs that the starter may bear, and thus the relative benefits enjoyed by the latter, can be significant. Late Mover Advantage and so on. The fact that latecomers can enjoy a variety of benefits as well as the profits of the starters is an important consideration that must be taken into account by many companies considering entry into the market. In general, there is a very high risk of overinvestment in technology and market uncertainty. For example, China has skipped wired networks and went wireless, and many African countries have skipped wired communications and built infrastructure for wireless communications. In other words, companies that hastened to invest in fixed-line facilities in order to preoccupy the African telecom market are in a state of failure rather than expecting the interests of the starters. Another thing is that the starter has to bear more risks and costs than the latter, such as the uncertainty of demand, the risk of changing consumer preferences, and the cost of training new consumers. Also, because imitation is generally less costly than development, a latecomer entering through imitation may be in a better position if patents or other technical defenses are not available. Especially, if latecomers have excellent management ability and financial power such as excellent marketing ability, it is relatively easy to catch up with the first candidate.

At the Bank of Korea, capital stock statistics were created by the PIM (perpetual inventory method) with fixed capital formation data. Asset classifications also included 2 categories in residential buildings, 4 non-residential buildings, 14 constructions, 9 transportation equipment, 28 machinery, and 2 intangible fixed assets. It is the Korean government accounting system which is developed much with the field of the national accounts including the valuation, but until 2008 it was consistent with single-entry bookkeeping. Many countries, including Korea, were single-entry bookkeeping, not double-entry bookkeeping which can be aggregated by government accounting standard account. There was no distinction in journaling between revenue and capital expenditure when it was consistent with single-entry bookkeeping. For example, we would like to appropriately divide the past budget accounts and the settlement accounts data that have been spent on dredging into capital expenditure and revenue expenditure. It, then, tries to add the capital expenditure calculated to FCF (fixed capital formation), because revenue expenditure is cost for maintenance etc. This could be a new direction, especially, in the estimation of capital stock by the perpetual inventory method for infrastructure (SOC, social overhead capital). It should also be noted that there are differences not only between capital and income expenditure but also by other factors. How long will this difference be covered by the difference between the ‘new series’ and ‘old series’ methodologies? In addition, there is no large difference between two series by the major asset classification level. If this is treated as a round-off error, this is a problem.

Although the 1997 Raw Data of the National Wealth Statistical Survey (South Korea) is timely 20-year-old data, it is meaningful as a benchmarking in the capital stock estimations of Korea, which is estimated by PIM (permanent inventory method). In the case of machinery/equipment, it is the data that can analyze in depth the changes in the industrial structure of Korea. In the case of ASL (average service life) which has economic concept, since the change of ASL is not so large, ASL yielded by the Raw Data of the 1997 National Wealth Statistical Survey is meaningful as reference value for the ASL estimated by the Bank of Korea and the National Statistical Office. As you know Japan has changed its service life due to changes in its industrial structure. However, many of its assets are still used for the years indicated in Showa (before 1989). The same trend with other countries such as Japan. However, the United States is constantly devoted to assessing the useful ASL and value of assets by distinguishing between the Hulten-Wykoff models and those not. Korea has also benchmarked the useful ASL of the United States and Japan when it conducted its own survey every 10 years by due diligence until 1997. In this study, the ‘constraint’ Iowa curve estimation by the Raw Data of the 1997 National Wealth Statistical Survey is based on the age records of the assets and the maximum age of the assets appropriately derived. And then we made modified Iowa curve by smoothing. From this modified one, we suggested ASL by asset. After 1997, the vintage disposal data directly were collected by the National Statistical Office with Oh Hyun Seung, Cho Jin Hyung, in order to estimate the useful ASL. Since then, the B/S team of the Economic and Statistics Bureau of the Bank of Korea has been working on a new concept of content training.

In this study, a correlation between execution of quality management activities and their results was verified by applying the Malcolm Baldrige model (hereafter referred to as the MB model) as a quality management performance measurement indicator for small and medium enterprises (SMEs) in South Korea. To achieve this goal, we need to determine whether the categorical requirements in the MB model are recognized consistently in SMEs, as a prerequisite. To this end, factor analysis was conducted for measurement variables in each category, which revealed that the process indicator was made up of six factors and the outcome indicator was made up of five factors, like those configured in the MB model. This result can be interpreted to mean that the requirements in each category of the MB model were well produced and recognized consistently throughout SMEs in South Korea. In addition, the analysis of causality between the process indicator (quality management activities) and the outcome indicator (management results) showed high causality between them. Although the quality management levels of SMEs in South Korea are inferior to those of conglomerates or other national quality award-winning companies, this study is significant in that the causality between quality management activities and results was verified, since this study targeted SMEs in South Korea as the target of investigation. Thus, it is empirically proven that the MB model can contribute to improved management results for SMEs in Korea.

In the international businesses human resource elements acquired in different countries might have different values in varied industries due to the different quality of education and experiences in the original countries. Using selection models to evaluate expected values in earnings equation of human resource elements such as education and experiences etc. acquired in sending countries, system equations are expanded to examine also the values of science and engineering degrees in technology jobs with selectivity bias correction. This paper used the US census survey data of 2015 on earnings, academic degrees, occupations etc. The US has long maintained the policy of accepting more STEM workers than any other countries and helped maintaining own technological leadership. Assuming per capita GDP gap between the sending country and the US downgrades immigrant human resource quality, it rarely affects occupational selection but depresses earnings on average by two or more years’ worth of education. Immigrant quality index in the sense of GDP gap appears to be a valid tool to assess the expected earnings of the worker with. Engineering degrees increase significantly the probability of selecting not only engineering jobs but also general management jobs, as well as increasing the expected earning additionally over nine years’worth of education. Getting a technology job is additionally worth about four years of education. Economics and business degrees are worth additionally almost six years of education but humanities degrees depress expected earnings. Since years after immigration does not very fast enhance earnings capacity, education level and English language ability might be more useful criteria to expect better future earnings by.

This study aims to configure what dimensions make up for smart phone after service quality, and how this service quality affects customer satisfaction and customer loyalty. Smart phone market is a market of the device leading the digital convergence as well as positioning itself as one of the national growth driving industry. To survive in this matured market, companies should have to respond actively to radical changes and customers needs in the so-called Smart Revolution environment. Lately, however, the smart phone market is prospected to move from growth phase to mature phase by the scholars. In order to proactively respond to the change in such market condition, companies need to provide absolute advantage in customer loyalty over their competitors by revolutionizing the after-sales service quality. Qualified A/S will lead to service satisfaction and achieve customer loyalty. The empirical analysis results obtained through A/S quality are as follows : First, human quality (attitude, expertise, problem-solvability), environment quality (handling agility, convenience, comfort), service policy quality (quality guarantee, additional service operation) are dimensions that make up for A/S quality. Second, A/S quality dimension showed a significant positive influence on service satisfaction and A/S satisfaction showed a positive influence on customer loyalty as well. Based on this empirical study, we propose some implications for A/S quality improvement. First, human quality dimension has relatively higher influence on A/S satisfaction in case of free A/S, so companies need to solve the product problem completely when consumer’s first visit by continual employee education. Second, in case of paid A/S, the service policy quality-especially A/S Warranty period- has higher influence on A/S satisfaction.

The new businesses started by the companies usually results in being unsuccessful. The main reasons for that are either aiming targeting wrong customers, unsatisfaction of customers’ requesting quality standards, or taking wrong actions against the competitors in the market. Therefore, companies should aim the targets for the newly developing products based on the fulfilling values for the customers when they start the new businesses, and should take good cares for risk managements at the each step of the new business to prevent the failure in advance. In addition to that, the companies starting new businesses not only need to take the customers attributes (CA) into account, but they also should apply the new technologies as one system to initiate a new business to satisfy the basic wants of the customers. This article suggests the New Product Development Pursuing Model using the Indicative Planning methodology and the Quality Management tools. The New Product Development Pursuing Model would be completed by the following steps as below; 1. Drawing the CTQ (Critical To Quality) for setting up the new product development objectives by : i) using the VOC (Voice Of Customers) obtained by the QFD (Quality Function Deploypment) if the market is mature, ii) applying AHP (Analytic Hierarchy Process) to information in the QIS (Quality Information System) if the market is unmature to get enough need information of the customers. 2. Risk Management in NPD : The NPD pursuing model consisted of the IP (indicative planning) is suggested not by the process of top-down-way mandatory planning process, but by the tools used in the administrative science and economic fields, namely by governance. The companies could apply innovative methodology for new products development processes to fulfil the customers satisfaction in the fields, through the CA (Contingency Approach) of the NPD (New Product Development) process.

In international businesses human resource elements acquired in different countries might have different values in varied industries due to different quality of education and experiences in original countries. Using existing models to evaluate expected values of human resource elements such as education and experience setc. acquired in sending countries they are expanded to examine also the values of science and engineering degrees in technology jobs with selectivity bias correction. This paper used the US census survey data of 2015 on earnings, academic degrees etc. to contrast qualitative effects with quantitative effects of human resource elements compared to those in the native and/or white group.

경영환경변화와 경쟁환경이 가속화 되면서 고객만족의 개념이 점차 고도화 되어 고객의 요구사항이 시시각각으로 변하고 있다. 고객만족경영을 통해 고객에 대한 품질, 원가, 납기에 대한 우위를 점하기 위해서는 정보의 가치를 극대화해서 의사결정에 반영하여야 한다. 고객의 요구는 고객의 언어로 정성적이고 모호한 특성으로 고객 스스로도 자신의 요구를 정확 하게 표현하지 못하는 경우도 존재한다. 따라서 연구에서는 품질정보시스템 데이터베이스에 축적된 정보를 AHP를 이용하여 공정 담당자의 경험과 직관을 활용하여 급변하는 고객의 요구를 신속하게 추가함으로써 공정의 중요한 관리항목을 선정하는 방법을 제시한다.

Mobile phone market, a market of the device leading the digital convergence as well as positioning itself as one of the national growth driving industry and as a daily necessity, is led globally by companies that have been actively responding to changes in the so-called Smart Revolution environment. Lately, however, the Smart Phone market is prospected to move from growth phase to mature phase by the scholars. In order for a company to proactively respond to the change in such market condition, it is imperative that they ensure absolute advantage in customer loyalty over their competitors by revolutionising the after-sales service(A/S) quality that will lead to service satisfaction. This study aims to configure what dimensions make up for mobile phone A/S quality, and how this quality affects customer satisfaction and loyalty as well as proposing directions for A/S quality improvement by identifying them case by case to see what dimensions have more impact on customer satisfaction.

It is common knowledgement that small sized firms have the strategic flexibility for sustainable management. The synergies with existing businesses to secure new growth engine is pregnant to rise as a strong going_concern. But many barriers are existing in stages and processes such as collection of tacit knowledge, design, research, development, human resource, financing, etc.. In this study, a factory automation system maker with design capability , during several years, has had a strategic flexibility which the firm has researched and developed the medical device which measures sodium(Na) and potassium(K) in human urine as its new growth engine for sustainable management. The company mentioned above has had a successful case. The successful case has story as following: From the product development through the process of convergence to the requirements of the medical field, research and development has been selected via the item Concurrent access and macro-environment (PEST) analysis. Among the elements necessary technology to medical equipment research and development design a mechanism part to take full advantage of the core competencies of the existing business, production was biosensor linear DNA Aptamer and chemiluminescence protocol improved while using outsourcing from abroad through a fairy tale. Digestion process was being tried. By analyzing the existing Lab on a Chip and avoid patentrelated patents embody the development concept was to develop diagnostic kits addition, diagnostic equipment exterior design were commissioned to proceed with the design and external specialist. It was confirmed that external consultant to reinforce the innovation capacity shortage, strategic alliances with various support organizations and other companies are very important.

Companies build the factory automation system to improve management effectiveness and productivity as prime strategies for sustainable growth. But most companies undergo various trials and errors while carrying out the project without elaborate preparation stage for factory automation. In this study, we tried to verify what factors are critical to effectively building distribution automation system, which is a branch of factory automation system. A consulting model for setting up a Material Handling Automation System by utilizing the Stage-Gate Process, which is product development process was studied. 29 material handling automation projects carried out between the year 1990 to 2013 at K-Company were selected. Interviews with the project managers, operators and maintenance personnels, various records and current status of the projects were used as data for structural equations based on the Milan consulting model and existing researches of factory automation, CIM for material handling automation. Creating effective basis of production, material handling system and energy saving system with expert review, when preparing a material handling automation project, help promote the project planning thus contributing to the performance of the resulting system, which appears though rather weakly in our data. Also the effect of material handling automation can be enhanced through sufficient and effective links to the relevant environments such as production logistics management and automated warehouses. More detailed planning characteristics of project promotion or some time-series data of effective Material Handling Automation System could enhace furthur studies. We propose a consulting model for setting up an efficient material handling automation system.

Until now, because a new product (or facility) launched in market has been retired from one year of age, we can have had ASL by stub-curve method by Iowa curve. Recently, many innovative products with important role in market like display and solar-cell etc. are more durable and, what are better, they have the constant variance in ASL because of their good quality. Of course, there are some ones like smart mobile phone with relatively big dispersion in ASL. Estimating ASL of products like display and solar-cell etc., the new approach is needed. In this paper a new method applied traditional Iowa curve with accelerated reliability test (indoor/outdoor) etc. is proposed.