This study divided consumer food-related lifestyles into five types: health-oriented, convenience-oriented, safety-oriented, economics-oriented, and taste-oriented. According to this grouping, we separated the lifestyles into low-interest, safety and economics-oriented, taste-oriented, and high-interest. The results showed that the safety and economics-oriented group was the largest, whereas the taste-oriented group was the smallest. The results also showed that Korean food consumer behavior and satisfaction differed significantly among the groups, and that the high-interest food-related life group exhibited the highest satisfaction. This study is significant because it segmented the local Korean food market, applied food-related lifestyles, and examined submarket characteristics.

마늘 분말을 첨가한 요구르트의 품질특성 평가를 위하여 탈지분유에 0.1~0.5%(w/v) 마늘 분말을 혼합하고 Streptococcus thermophilus와 Lactobacillus delbrueckii subsp. bulgaricus의 혼합균주를 접종하여 42℃ 에서 24시간 배양하였다. 마늘 분말 첨가량에 따른 유산균의 생육정도, 요구르트의 이화학적 및 관능적 특성 을 검토하였다. 마늘 분말이 첨가된 요구르트의 적정산도는 0.78~0.81%로 마늘 분말이 첨가되지 않은 대조 군(0.73%)보다 높았다. 마늘 분말을 첨가한 요구르트의 생균수는 0.3% 첨가군에서만 상대적으로 낮았고 여 타 실험군은 대조군과 유의적인 차이가 없었다. 마늘분말의 첨가량이 증가함에 따라 요구르트의 점도도 상승 하여 0.5% 마늘 분말이 첨가된 요구르트의 점도가 가장 높았으며, 색도는 대조군과 마늘 분말 첨가 요구르트 사이에 유의적인 차이가 없었다. 관능적 특성을 조사한 결과 마늘 분말의 첨가에 따라 색은 더 높은 선호도를 보였고, 마늘 맛이나 향은 마늘 분말의 첨가량에 비례적으로 증가하였으며, 전반적인 기호도는 0.1%와 0.3% 첨가시는 대조군과 유의차가 없었다. 이상의 결과를 종합하여 볼 때 요구르트 고유의 품질특성이나 유산균의 생육 및 관능적 특성에 영향을 미치지 않는 범위에서 첨가 가능한 마늘 분말의 적정 수준은 0.3% 미만으로 판단된다.

일본 정부는 사용후핵연료의 중간저장시설의 입지로 아우모리현의 무쯔시를 선정했다. 2000년부터 시작된 유치활동이 5 년만에 결실을 맺은 것이다. 한국은 사용후핵연료를 원자력 발전소 내에 저장하고 있는데 2016년이면 저장한계에 이를 것으로 전망되고 있어 일본의 사례연구는 한국에 시사하는 바가 크다. 한국은 경주에 중, 저준위 방사성 폐기물 저장시설을 성공적으로 유치한 경험이 있어 사용후핵연료의 저장시설을 유치하는 학습경험을 축적한 바 있는데 두 나라의 큰 차이점은 한국은 경쟁적인 주민투표를 통하면서 막대한 지역지원금을 지원한다는 점이고 일본은 주민투표를 시행하지 않고 지방자치 정치의 리더쉽이 문제를 해결하는 방식을 택했다는 점이다. 엄청난 지역지원금이 지원되지 않은 점도 일본의 특징이다. 본 연구가 한국의 사용후핵 연료 저장시설을 유치하는 데 도움이 되었으면 하는 바람이다.

Electrodes were fabricated based on activated carbon powder BP-20, conducting agent such as Super P, vapor grown carbon fiber (VGCF) and acetylene black (AB), and the mixed binders of flexible poly(vinylidenefluoridehexafluoropropylene) [P(VdF-co-HFP)] and cross linking dispersion agent of polyvinylpyrrolidone (PVP) to increase mechanical strength. According to impedance measurement of the electrode with the addition of conducting agent, we found that it was possible to charge rapidly by the fast steady-state current convergence due to low equivalent series resistance (AC-ESR, fast charge transfer rate at interface between electrode and electrolyte and low RC time constant. The self-discharge of unit cell showed that diffusion process was controlled by the ion concentration difference of initial electrolyte due to the characteristics of Electric Double Layer Capacitor (EDLC) charged by ion adsorption in the beginning, but this by current leakage through the double-layer at the electrode/electrolyte interface had a minor effect and voltages of curves were remained constant regardless of electrode material. We found that the 2.3V/230F grade EDLC would be applied to industrial safety usage such as uninterrupted power supply (UPS) because of the constant DC-ESR by IR drop regardless of discharge current.

The best Ppy weight ratio was 7 wt% and the optimal electrode composition ratio was 78 : 17 : 5 wt.% of (MSP-20 : BP-20 =1 : 1), (Super P : Ppy =10 : 7) and P(VdF-co-HFP). Implantation of Ppy as the conducting agents have led to superior electrochemical characteristics because of the low of internal resistance and faradaic capacitance. The result of unit cell with Ppy 7 wt% were as follows: 28.02 Fig of specific capacitance, 1.34 Ω of DC-ESR and 0.36 Ω of AC-ESR. Unit cell showed a good stability up to 200 charge-discharge cycles, retaining 82% of their original capacity at 200 cycles. From the analysis of impedance, the electrodes with Ppy 7 wt% showed low ESR, low charge transfer resistance and quick reaction rate. It was inferred that quick charge-discharge was possible. As compared with the specific capacitance (rectangular shape) of CV, it was also concluded that the specific capacitance originated from thecompound phenomena of the faradaic capacitance by oxidation and reduction of Ppy and the non-faradaic capacitance by adsorption-desorption of activated carbon.

In the electrode fabrication of unit cell, we found that optimal the electrochemical characteristics were obtained with at 90 wt.% of activated carbon(BP-20), 5 wt.% of conducting agent(Ppy, Super P) and 5 wt.% of P(VdF-co-HFP)/PVP mixed binder. The electrochemical characteristics of unit cell with Ppy improver were as follows : 37.6 F/g of specific capacitance, 0.98 Ω of AC-ESR, 2.92 Wh/kg and 6.05 Wh/L of energy density, and 754 W/kg and 1,562 W/L of power density. It was confirmed that internal resistance were reduced due to the increase of electrical conductivity and filling density by the introduction of conductivity agent, and content of conducting agent was suitable in the range of 4~6 wt.%. According to the impedance measurement of the electrode with conductivity agent, we found that it was possible to charge rapidly by the fast steady-state current convergence due to low equivalent series resistance(AC-ESR), fast charge transfer rate at interface between electrode and electrolyte, and low RC time constant.

The electrodes were fabricated by compounding the commercial activated carbons and additives of conducting polymer with PVdF mono binder and PVdF-PVP mixed binders. The best performance of the electrodes fabricated with activated carbon(BP-20) and PVdF-PVP mixed binders showed in 88wt. ％ BP-20. 7wt. ％ conducting polymer and 5wt.％ PVdF-PVP mixed binder. The electrode exhibited excellent electrochemical characteristics having 8.16 W.h/kg of energy density, 34.77 F/g of specific capacitance, 0.67Ω of ESR.

High surface area and high pore volume activated carbon was prepared by KOH activation of rice hull. The electrodes were fabricated by compounding the commercial and rice hull activated carbons with PVdF and PVdF-PVP mixed binders without addition of conductivity improver. The electrodes fabricated with rice hull activated carbon and PVdF-PVP mixed binders showed the best performance because the PVP played as a pore-forming agent. The electrode exhibited excellent electrochemical characteristics having 7.9 W.h/kg of energy density, 33.5 F/g of speific capacitance, 0.7 Ω of ESR and good efficiency of self-discharge compared with that fabricated with commercial activated carbons.

PVA blend films were prepared by solution blending method for the purpose of useful antibiotic polymers. Characteristics properties of blending films such as elongation and tensile strength were determined. Tensile strength and elongation were rapidly reduced as increasing the blending ratio of natural polymer. Blend films were found that phase separation was occured as more than 25wt% increasing the blend ratio of chitosan. Also, The antibiotics of blend films were examined against gram(+) and gram(-) by disk susceptibility test. As a result, kind of blending films to show the highest antibiotics was chitosan 20wt% and the selectivity of mold strain was observed.

운반체(감응물질)로 제 4급 인산염을 사용하여 PVC를 지지체로 하여 과염소산이온의 농도 10-6 M까지 선형적인 이온선택성 전극을 제작하였다. 운반체의 화학적구조와 함량 가소제의 종류 및 막 두께에 따른 전극의 기울기 선형응답범위 및 한계측정농도 등 전극전위특성을 고려하여 최적의 과염소산 이온선택성 PVC막 전극을 제조한 다음 측정 가능한 pH 범위 선택계수 및 전극의 교류임피던스 특성을 비교 검토하였다 운반체로 tetraoctyl-phosphonium perchlorate(TOPP) tetraphenylphosphonium perchlorate(TPPP) 및 tetrabutylphosponium perchlorate (TBPP) 등의 제 4급 인산염의 과염소산 이온 치환체를 사용하였다 알킬기의 탄소고리 수가 증가할수록 전극특성은 TBPP, 선형응답범위 10-1×10-6 M 및 한계측정농도는 9.66×10-7 M 이었으며 시판되고 있는 Orion 전극특성보다 좋은 결과를 나타내었다 전극전위는 pH3~11범위에서 ph의 영향을 받지 않았으며 CIO4 에 대한 방해이온의 선택계수 서열은 SO24 < F < Br < I 이었다 임피던스 측정결과 TOPP의 경우 등가회로는 용액저항 이중층용량과 벌크저항의 병렬 및 Warburg 임피던스의 직렬이었다 이 경우 용액저항은 거의 나타나지 않았고 확산에 의한 Warburg 임피던스는 크게 나타났으며 Warburg 계수는 1.32×1074 Ω cdot cm2/s1/2이었다.

A new type of capacitor named "Super Capacitor" has been developed, in which the properties of electric double layer formed at the interface of activated carbon electrode- liquid organic electrolyte is applied. This capacitor is small In size, light in weight, wide In temperature range(-25~70℃), large in charge-discharge capability and good in voltage preservation. And this super capacitor is applied as a power back-up for electricity failure in volatile memory devices etc., a power source for a short time and a power source for operating actuators. At present the development of high power back-up types of the capacitor system and improvement of their characteristics are being actively conducted in order to find wider applications.lications.

벼의 유묘기 저온처리하에 나타나는 chlorosis현상의 유전양식을 규명하기 위하여 실험한 결과를 요약하면 다음과 같다. 벼 21 공시품종 유묘기 저온 ()처리에서 chlorosis가 나타나는 품종은 통일형인 "밀양23호"와 인디카형인 "IR 36", "Dular"로 3품종이었고, 모든 자포니카형 품종에서는 chlorosis가 나타나지 않았다. 저온처리하의 엽록소 함량 감소는 품종군과 재배종간에 다양한 차이를 나타내었다. Dular와 Toyohatamochi가 교배된 집단에서 저온처리에 의해 나타나는 제 3엽의 chlorosis 현상에 대한 분리비는 정상 개체와 chlorosis 개체가 3 : 1의 이론적 분리비 적합하였다. 이결과로 벼의 유묘기 chlorosis의 유전은 단순열성 유전자에 의해 지배 되는 것으로 분석되었다.

The distribution of bacteria in kimbab and its ingredients have been investigated. The total bacterial counts were over 3 × l0³/g(n=30) when the kimbabs were delivered to restaurant and it e×ceeded the legal level 1 × 10^5/g defined by the Code of Food Standard in 1991. The gram-negative coliforms were also detected 1.9 × 10^5/g. In order to study the cause of bacterial contamination in kimbabs, the ingredients used in kimbabs were examined. The bacterial counts were found 10⁴-10^5/g for kim (layer), 10⁴-l0^5/g for sausage, 10⁴-l0^6/g for boiled-spinach, 10³-10^7/g for carrot, and 10³-10^6/g for Danmyji, respectively. From these results it could be concluded that the bacterial contamination in Kimbabs was caused mainly by the ingredients such as kim, boiled-spinach, carrot, and sausage. Therefore, this suggested that the sanitary manufacture of kim, the storage at refrigerator temperature of the ingredients for kimbabs, and the proper treatment of equipments should be maintained in order to reduce the bacterial contamination for kimbaba. Furthermore, it should be required to obtain the basal data for establishment of the sanitary standard of kim and kimbab.

과공정 Al-18wt%Si합금의 초정 Si입자의 미세화에 미치는 첨가원소의 영향에 관하여 조사하였다. 초정 Si입자의 크기는 P량이 증가함에 따라 미세해졌으며 적정 P량은 40ppm이었다. 최적주입온도는 AlCuP, CuP 경우 각각 750˚C, 800˚C이었으며 미세화 처리 후 10분 이상 경과되어도 초정 Si입자의 크기는 변화가 없었다. 또한 WDS분석 결과 초정 Si내에 AIP가 핵생성 site로 존재함을 알 수 있었다.

작약(芍藥)의 약(葯)으로부터 분리된 화분소포자(花粉小胞子)를 생장조절제가 첨가되지 않은 MS 배지에 배양하였을때 직접 배(胚)발생 과정을 거쳐서 소포자 유래의 배(胚)가 형성되었고, 1mg/l의 PAA가 첨가된 배지에서는 화분소포자 유래의 캘러스가 형성 되었으며 이들 캘러스를 생장조절제를 함유하지 않은 배지에 이식하였을 때 배양 7주 후에 배(胚)가 형성되었다.