In order to investigate the effectiveness of methanol, which has high latent heat of evaporation and oxygen contents, for DI diesel engine performance and exhaust emission, the methanol was injected at the suction port of DI diesel engine. The injector used for test was conventional gasoline engine injector and controlled the quantity of methanol per cycle by the power supply controller which designed specially for injector. The results shown that the maximum pressure point was delayed, the value of maximum pressure was decreased, and the concentrations of both NOx and Soot were decreased, as the methanol injection quantity increased, and also the thermal efficiency of engine injected methanol under the high load condition was similar to no methanol injection but under the medium load condition was decreased within the experimental conditions.

Surface tension as a function of concentration and temperature was measured for aquous solution of sodium N-acyl sarcosinate, RCON(CH3)CH2 COONa, From the intersection points in the (γ-logC) curves, the critical micelle concentration (cmc) was determined at 20, 30, 40, and 50℃. Structural effects on the cmc maximum and the minimum area per molecule at the aquous solution/air interface were discussed. The free energy, enthalpy, and entropy of micellization and adsorption of surfactant solution also were investigated. Numberous investigators have dealt with sodium N-acyl sarcosinates and their applications as wettings, flooding and reducing agents and as corrosion inhibitors.

Physical properties and performance characteristics of sodium salt of several pure N-acyl amino acids made from glycine, dl-alanine, sarcosine, dl-valine, l-leucine, l-aspartic acid and l-lysine seven long chain fatty acids are reported. The effect of acyl chain length and the differences in the structure of constituent amino acid of seven homologous series of amide intermediate linked carboxylate surfactant of this class on the properties are discussed.

Weigi(衛氣) is defensive energy which moves outside the conduits, permeating the surface of the body and warding off exogenous pathogens ; superficial resistance of the body. Yinggi(營氣) is constructive energy which moves though the conduits and nourishes all the organs This volume commets on creation and gathering of Yinggi(營氣)-Weigi(衛氣). Therefore subjicts can be chosen Yong Wi Sang Whei(營衛生會). This volume contents three chapters ChapterⅠdeals that yingi(營氣) is created from zhuogi(終期) ; dense part of food essence or waste gas, e.g., the air expirde or flactus discharged; and wei is created from qinggi(淸氣); ⑴ fresh air usually referred to the air inspired in the lung ⑵ food energy or nutrient esp. the clarified thin part of food essence ⑶ clear up the evil heat from the Qi system: a method in treating febrile diseases. Chapter Ⅱ deals with the difference between a youth and adult. Chapter Ⅲ deals with the relation between yinwei(영위) and Triple Burners.

다양한 수질 오염원 중 페놀과 같은 유기화합물은 배출조건이 비정상적인 경우 기존의 처리방법으로 제거하거나 파괴하기 어렵다. 수용액으로부터 페놀을 분리하기 위한 최근의 연구들은 활성탄에 의한 흡착, 용매 추출 등에 의해 수행되어져 왔으며, 물-기름 유화에 기초를 둔 액막법이 기존의 기술들을 대체하기 위한 방법으로 시험되어져 왔다. 본 연구에서는 tri-n-butyl phosphate(TBP)와 액상 고분자를 지지액막의 액막용액으로 선정하여 수용액상의 페놀을 분리하였다. 공급측 페놀 농도를 변화시키고 다양한 액막용액을 사용하여 이들이 페놀분리에 미치는 효과를 연구하였다. TBP를 운반체로 사용한 경우의 실험결과들은 용매추출에서 주로 사용되고 있는 methyl isobutyl ketone(MIBK)보다 높은 물질전달속도를 보여주었으며, 선택한 액상고분자 중 polypropylene glycol 4000(PPG-4000), polybutylene glycol 500(PBG 500)의 경우 MIBK와 유사하거나 조금 높은 값을 나타내었다.

PFO(pyrolized fuel oil) and C10+ oil, which are the residual heavy oils form a NCC(naphtha cracking center), were heat-treated to produce the precursor-pitch for carbon materials. After PFO was initially distilled near 300℃ to separate the volatile matters recovering as high-quality fuel oil, the residuum of nonvolatile precursor-pitch was then thermally pyrolized in the temperature ranges from 350℃ to 450℃. Spinnable isotropic pitch with the softening point of 200℃ and the toluene insolubles of 36wt% was obtained at 365℃, and then was successfully spun through a spinneret(0.5mm diameter). After spinning, an isotropic carbon fiber of 25μm diameter was obtained via oxidation and craboniation procedures. Mesophase spherules began to be observed from the product pitch pyrolized at 400℃, and bulk mesophase with a flow texture was observed above 420℃. In the case of C10+ was the feed was polymerized in the presence H2SO4 at room temperature to increase the molecular weight and then heat-treated gradually up to 200~250℃. The products obtained with the softening point of 80~190℃ were carbonized at 500 and 1000℃ to examine the morphology.