By applying super-high pressure (150-250 MPa) to a sealed pressure vessel, it is possible to make oyster shucking machine that automatically opens two-sheet shellfish or oysters. Possibility of developing a shucking machine was confirmed by identifying the working pressure for meat of oysters produced in the southern coast and conducting sensory evaluation of meat oysters. As a result of confirming the shucked oysters under super-high pressure of 150 MPa in the pressure vessel, the number of type A with separated shells and well-separated meat was 22 and type B with both shells and internal meat and shells not separated. For the oysters that were treated at 175 MPa, there were 58 type As with shell separated and meat well separated and 42 type Bs without oyster shells and insides. When looking at the oysters shucked at 200 MPa in the pressure vessel, the number of type A was 86 and type B was 14 accounting for 86% of oysters with good marketability. As a result of shucking oysters by applying 250 MPa, 96% type A oysters and 4% type B oysters were obtained from the total specimen. The total specimen oyster weight used in the conducted experiment was 6 kg, the average oyster shell weight was 3.99 kg and the average oyster meat weight was 1.25 kg. Therefore, the fatness of oyster meat, which measures the added value of oysters, is 20.8%. Sensory evaluation was conducted on thinned oysters by hand and type A oysters shelled by machine with an operating pressure of 200 MPa. The hand-worked oyster sample scored 4.7 points only in salty taste, and scored 5.0 or higher in color, shape, smell, fishy taste, texture and preference.

The purpose of this study was to investigate the improvement effect of biomarkers through the supply of natural diet in the juvenile hybrid abalone (Haliotis discus discus♀*H. madaka♂). For the study, the shell length of about 17 mm and the total weight of 0.83 g were used. The feeding conditions were set as the natural diet group (dried laver) and the formulated diet group, and the experiment duration was 16 weeks. The survival rate was about 14% higher in the natural diet group than the formulated diet group, and growth was also faster in the natural diet group. Shell malformation rate was lower in the natural diet group (7.5%) than the formulated diet group (21.5%). In the biochemical composition, except for carbohydrates, both experimental groups showed similar values. The degeneration of epithelial cells in the hepatopancreatic tubule was lower in the natural diet group than the formulated diet group, and the activity of basophilic cell was higher in the natural diet group. These results indicate that it is worth considering the supply of natural diet for the breeding of juvenile hybrid abalone and the improvement of the quality of the formulated diet (H. discus discus♀*H. madaka♂).

In 2020, Yi Hunwoo was discovered as one of the earliest modern architects in Korea. However, his personal life was yet mostly unknown, including the time of his death. The research team (‘the team’ hereafter) searched for the records of his personal life and professional career. First, his family genealogical chart revealed that he died in 1937. Having located and contacted Yi’s direct descendents, the team was able to clarify his family background with the descendants’ testimonies. They possess the photographs of him and his family members, including Yi’s picture when he was a freshman at the Nagoya Higher Technical School in Japan. The team also identifies his birthplace and the location of his grave as Hadong, Gyeongsangnamdo, Korea. The team visited his project site in Jinju, Gyeonsangnamdo, Korea and obtained more detailed information about the Ilshin Girls’ High School, which he designed in 1928. Gyohoan, the congregation records of Cheondogyo, one of the leading religions in Korea during Yi’s times, confirmed that he was one of the congregation members. The field research also discovered the house he designed and built in his hometown of Hadong, probably the only surviving architectural project by him. This paper is to report the result of the research on Yi’s life and career with the aim of providing materials for further studies in identifying and positioning him more properly in the early 20th century Korean architectural scene.

In order to collect basic information of response behavior of red seabream (Pagrus major) during pilling, works for constructing wind power station in Byeonsan Peninsular, Korea were investigated. Four cultured red seabream CRB1 to CRB4 [total length (TL): 27.1 ± 1.0 cm; body weight: 359 ± 30 g] were tagged with an acoustic tag and used in experiment. CRB1 and CRB2 to CBR4 were released on the sea surface at same time around the constructing site of the wind power plant on September 22, 2017 and July 18, 2018, respectively. The tracking of the CRB1 to CRB2 and CRB3 to CRB4 were conducted for two hours, approximately, using VR100 receiver including a directional hydrophone and VR2W receivers array consisted of 19 presence/absence receivers (VR2W receivers), respectively. The underwater noise level before (no pile driving works) and during pile driving works was measured 116.0-118.0 dB (re 1Pa) and a maximum of 160 dB (re 1Pa), respectively. CRB1 moved about 6.0 km with average swimming speed of 80.2 ± 20.5 cm/s for 2.1 hours without pile driving work. The average water depth of the sea bed on the route of CRB1 was 9.1 ± 0.4 m. CRB2 moved about 7.3 km with the average swimming speed of 96.8 ± 27.1 cm/s for 2.1 hours with pile driving work. The water depth of the sea bed on the route of CRB2 was 11.9 ± 0.6 m. At results of the Rayleigh’s z-test two fishes CRB1 and CRB2 showed significant directionality in the movement (p < 0.01). Movement mean angles of CRB1 and CRB2 were 92.7 and 251.8°, respectively. CRB2, CRB3 and CRB4 exhibited the escaping behavioral response from the noise of source during the pile driving work. The swimming speed of the CRB2 exposed on the heavy underwater noise stimuli due to the pile driving work was 1.21 times faster than that of the CRB1 exposed on the ambient underwater

We analyzed the cutting mechanism of laver harvesting machine in the sea area near Gooam Port in Goheung, Jeollanam-do, and investigated the change and efficiency of laver collecting operation in the working ship. The laver working ship slides uniformly from the bow to the upper part of the laver collecting machine on the deck and cuts the wet laver attached to the bottom of the net at the blade of the havesting machine. The laver farming net, which was loaded with laver turrets on the deck by gravity and collected primitives, consisted of a ship structure that led to the stern side and into the sea. The working ship operation is in harvesting process while driving in a S-shape that is separated by one space to efficiently collect the laver net. During laver working ship operation, the speed was 0.51 m/s in the access stage, 0.56 m/s in the havesting stage, and 0.52 m/s in the exit stage. Considering the cutting edge life and production efficiency of the laver harvesting machine, it is appropriate to harvest 1.15 to 1.26 kg/rpm by operating at a rotational speed of about 700 to 800 rpm rather than forcibly harvesting the product at high speed. On the deck of the working ship, 959.7 kg of starboard and 1048.7 kg of center were 964.7 kg of port side. Based on the starboard, 9.3% of the central part and 0.5% of the port side appeared. The reason for this was due to the difference in harvest time according to the turning direction of the working ship.

This research focuses on the life and works of architect Yi Hunwoo, who was active in early 20th century. Yi has been previously mentioned in a few research documents, but not as a main subject of interest. Thanks to digitalized historic databases, the authors of this research were able to access more information about Yi. It was discovered that he was born in Korea in the late 19th century and then attended the Nagoya Higher Technical School in Japan. After repatriation, he participated in a few public projects in Korea as an in-house architect at the Governor-General’s office, then started his own practice and produced his individual projects. He also contributed articles on innovations in residential design to newspapers. Chronologically, his activities as an architect preceeded those of Park Gilyong, who has been conventionally regarded as the first Korean modern architect so far. This research would like to establish Yi Hunwoo as a historic figure whose professional career spanned the earlier stage of the Korean modern architecture, based on the records of his life and professional activities. The authors do not wish to present the architectural analysis nor evaluation of his works, which will be subject to future researches.

In this study, an automatic system for improving the working environment and increasing production efficiency of a laver aquaculture industry in Korea was developed by combining a hydraulic control system and a load cell in a current landing work of the laver. The improved gathering laver system allowed the automatic gathering process of the laver in the sea with the hydraulic control system connected to a cutting machine of the laver on the operating ship, which has been used for gathering the laver semi-automatically in a form of the traditional farming method. The transporting process of the laver from an operating ship to the land was improved as follows. A frame installed on the operating ship and the bag nets were designed and made to hold about 1,000 kg of the laver inside. The bag nets contain the laver on the improved operating ship were tied in knots and hooked on a crane using a load cell. The weight is measured immediately by lifting the bag nets through the load cell system. Weight information is communicated to the fishermen and successful bidders through the application. The advantages of the improved system can help fishermen to fish by improving their working environment and increasing production efficiency. The field survey to improve the landing operation of the laver aquaculture was conducted in Gangjin, Goheung, Shinan, Wando, Jindo, and Haenam in South Jeonnam Province. A total of 10 sites including Gunsan in Jeonbuk Province, Daebu Island in Ansan City, Jebu Island in Hwaseong City in Gyeonggi Province, and Seocheon in Chungnam Province were searched to collect data. Prototypes of the system were tested at the auction house of laver located in Goheung, where laver collection using hydraulic control and landing using road cell could be improved.