A disposal of radioactive wastes is one of the urgent issues in worldwide. Considering upcoming plans for decommissioning of nuclear power plants, this problem is unavoidable and should be discussed very thoughtfully before long. There are variety of methods to deal with radioactive wastes, including Incineration process, conventional gasification process and plasma gasification process and so on. Among them, plasma gasification process is in the limelight due to its ecofriendly features and very large volume reduction effects. So, lots of countries like Japan, Taiwan, Russia, Bulgaria are already utilizing commercial plasma melting facilities and researching their own characteristics & disposal abilities and so on. Within the scope of this paper, I would like to introduce other countries current status of plasma melting facilities, and reach the conclusion on the directions to go for realistic radioactive wastes treatment.

뇌 3차원 T1 관상면 검사 시 ENCASE를 적용했을 때 CS 계수의 증가 시 영상획득 시간 변화와 영상의 질의 변화에 따른 유용성에 관하여 알아보고자 한다. 연구 대상은 본원을 내원한 30명의 환자를 대상으로 하였고, 1.5T MRI 장치로 진행하였으며, 24채널 두경부 코일을 사용하였다. 획득한 영상의 상대적신호강도비(rSI)와 상대적대조도비(rC)를 구하였으 며, MIPAV로 뇌실질과 뇌실의 체적을 측정하여 One-way Anova를 사용하여 정량적 분석을 하였고, p<0.05일 때 통계 적으로 유의한 것으로 해석하였다. 또한, 5점 리커트 척도를 이용하여 영상의 질에 대하여 정성적 분석을 하였고, 측정자 내 신뢰도를 확인하기 위해 ICC가 0.75 이상 나오면 측정자간 신뢰성이 높은 것으로 간주하였다. rSI와 rC 모두 p<0.05로 통계적으로 유의미한 차이를 보였고, 급내 상관계수가 0.75이상(p<0.05)으로 통계적으로 매우 높은 신뢰도를 나타냈다. MIPAV를 이용한 체적측정에서는 뇌실질과 뇌실의 체적의 차이는 p=1.000으로 통계학적으로 유의미한 차이는 없었고, 사후분석결과 또한 유의미한 차이를 보이지 않았으며. 급내 상관계수가 0.75이상(p<0.05)으로 통계적으로 매우 높은 신뢰도를 나타냈다. 또한, 정성적 평가에서는 CS 계수가 증가함에 따라 유의미한 차이가 있는 것으로 나타났다(p<0.001). 따라 서 ENCASE 기법을 이용한 3차원 T1 TFE 관상면 검사 시 CS 계수를 증가시킨다면 뇌의 체적 변화 없이 3차원 T1 시상면 영상보다 짧은 150초로 기존의 뇌 3차원 시상면 T1 기본 검사시간 260초 보다 짧은 영상획득 시간으로 진단적 가치가 높은 영상을 제공할 수 있을 것으로 사료된다.

The mesophase pith was synthesized based on effects of a high-pressure thermal condensation and feed (PFO/FCC-DO) blending. The reaction conditions were designed by fluidity and reactivity of each feed during the thermal reaction. The high-pressure thermal condensation process disturbs distillation of the volatile compounds in pyrolysis fuel oil (PFO); the fluidity can be controlled. In the blending process, PFO, which has a high thermal condensation reactivity, and fluid catalytic cracking-decant oil (FCC-DO), which maintains fluidity, interacted with a synergistic effect. Thus, mesophase pitch with a large mesophase content was manufactured by the two above processes.

Coke aggregates and carbon artifacts were produced to investigate the interactions of coke and pitch during the kneading process. In addition, the kneading ratio of the coke and binder pitch for the coke aggregates was controlled to identify the formation of voids and pores during carbonization at 900°C. Experiments and thermogravimetric analysis revealed that carbon yields were improved over the theoretical yield calculated by the weight loss of the coke and binder pitch; the improvement was due to the binding interactions between the coke particles and binder pitch by the kneading process. The true, apparent, and bulk densities fluctuated according to the kneading ratio. This study confirmed that an excessive or insufficient kneading ratio decreases the density with degradation of the packing characteristics. The porosity analysis indicated that formation of voids and pores by the binder pitch increased the porosity after carbonization. Image analysis confirmed that the kneading ratio affected the formation of the coke domains and the voids and pores, which revealed the relations among the carbon yields, density, and porosity.

Pyrolyzed fuel oil (PFO) and coal tar was blended in the feedstock to produce pitch via thermal reaction. The blended feedstock and produced pitch were characterized to investigate the effect of the blending ratio. In the feedstock analysis, coal tar exhibited a distinct distribution in its boiling point related to the number of aromatic rings and showed higher Conradson carbon residue and aromaticity values of 26.6% and 0.67%, respectively, compared with PFO. The pitch yield changed with the blending ratio, while the softening point of the produced pitch was determined by the PFO ratio in the blends. On the other hand, the carbon yield increased with increasing coal tar ratio in the blends. This phenomenon indicated that the formation of aliphatic bridges in PFO may occur during the thermal reaction, resulting in an increased softening point. In addition, it was confirmed that the molecular weight distribution of the produced pitch was associated with the predominant feedstock in the blend.

This research considers the effect of added mesophase pitch (MP) as an additive during the pitch synthesis reaction of pyrolyzed fuel oil (PFO). Two effects are generated by adding MP. One is an enhancement of thermal stability due to the high thermal property of the additive; the other is that the volatile compounds that were removed by vaporization of PFO during the thermal reaction can participate in the pitch synthesis reaction (PFO→pitch) more efficiently. The effect differs according to the amount of the additive. When the amount of the additive is less than 7 wt%, the first effect is dominant, whereas the second effect is dominant when the additive amount exceeds 10 wt%.

Melatonin is induced by light information through the retina and leads to growth factor activation. Thus, we investigated the effects of melatonin by controlling the photoperiod of growing young rats. Male Sprague‐gDawley rats (n=6; 4 weeks old) were divided into two experimental groups: the L/D group (normal photoperiod; light/dark: 12/12 h; lights on at 9:00 a.m.) and the L/L group (light/light: 24 h). Rat body weight and food consumption were measured daily for 8 weeks. After 8 weeks, the rats were anesthetized with a mixture of ketamine (50 mg/kg) and xylazine (10 mg/kg) and sacrificed. Tissue was then collected for RNA isolation (from brain, heart, liver, kidney, adrenal gland, testis, tibia, hind limb muscles). Also, serum was isolated from blood using a centrifugal separation. The L/L group had significantly lower body weight than the L/D group from 4 to 6 weeks (p<0.05). The L/D group had increased tissue mass, compared with the L/L group, but the difference was not statistically significant. The L/D group had a significantly higher melatonin concentration than the L/L group between the hours of midnight and 2:00 a.m (p<0.01). These results indicate that photoperiod length may affect the secretion of melatonin from the pineal gland. Also, the reduction of nocturnal melatonin secretion may retard the development of growing young rats. In future studies, we plan to compare exogenous melatonin administration with endogenous melatonin concentration induced by photoperiod control. Moreover, we will confirm whether the effects seen in pathological animal models can be reversed by controlling the photoperiod.

Our objective of current study was to investigate the development of bone and heart in association with diabetes mellitus (DM). DM was induced by administering an intraperitoneal injection of streptozotocin (STZ; 60 mg/kg) to 4‐gweek‐gold Sprague‐gDawley rats. Body weight and blood glucose were monitored, and rats were sacrificed after 2 or 5 weeks. The left ventricle (LV), including the interventricular septum, was weighed, and body weight and tibial bone length were assessed. Young diabetic rats showed reduced growth in terms of tibial length and body weight compared to controls. Moreover, diabetic males showed more significant growth suppression and reduced LV size than diabetic females. Morphometric analysis of tibiae from diabetic rats revealed suppressed bone growth at 2 and 5 weeks, with no difference between genders. STZ‐ginduced diabetes decreased bone growth and retarded pre‐gpubertal heart development. As a result, diabetes may increase cardiovascular risk factors and lead to eventual heart failure. Therefore, new therapeutic approaches are required for diabetic children exhibiting growth retardation. Heart growth factor, exercise, and cardiopulmonary physical therapy may be required to promote heart development and physiological function.

선행 연구에서 poly(styrene sulfonate) (PSS)/poly(diallyldimethylammonium chloride) (PDADMAC) 나노 여과막을 사용하여 불소 이온을 포함한 1가 이온 혼합물을 분리하는 것이 가능함을 보였다. 예를 들면, 다공성 알루미나 지지체에 (PSS/PDADMAC)4PSS 필름을 코팅한 경우 염소/불소 이온의 선택도가 3 이상이었으며 4.8 bar에서 용액의 플럭스가 3.5 m 3 /m 2-day이었다. 그러나, PSS/PDADMAC 이층의 수가 4.5에서 5.5.로 증가하면 염소/불소 이온의 선택도가 1.9로 떨어졌으며, (PSS/PDADMAC)6PSS 필름의 경우에는 염소 이온의 배제율이 급속히 증가하면서 선택도가 1에 가까웠다. 이러한 선택도의 감소 현상은 예상치 못한 것으로서 다른 지지체를 사용하여도 같은 경향을 보이는지 여부는 불분명하였다. 따라서, 본 연구에서는 다공성 알루미나 대신에 분획 분자량이 50kDa인 다공성 polyethersulfone (PES)에 PSS/PDADMAC을 적층하고 불소/염소 이온 혼합물의 나노 여과 특성을 살펴보았다. 그 결과 다공성 알루미나의 경우와 비록 적층 수는 달랐으나 불소 이온의 배제율이 최대가 되는 최적 적층수가 존재하였으며 이로부터 이러한 현상이 지지체에 무관한 일반적인 사실임을 알 수 있었다.