Lumpy Skin Disease (LSD) and Foot-and-Mouth Disease (FMD) cause substantial economic losses on the livestock industry. Therefore, vaccinations have been implemented as the control strategy in endemic countries. However, the potential adverse effects of administering vaccines for both diseases simultaneously have not been thoroughly evaluated. The aim of this study was to assess the impact of vaccinating dairy cows with either or both LSD and FMD vaccines on milk production and physiological parameters such as milk temperature, rumination time and body weight. The experimental groups were divided into four according to the injection materials: 1) saline, 2) LSD vaccine, 3) FMD vaccine, and 4) both vaccines. The impact of vaccination on milk yield and physiological parameters was evaluated daily until 12 days post-vaccination, and milk components were analyzed twice, once per week. Among the experimental groups as well as each vaccine group, no statistically significant differences (p < 0.05) were observed at milk yield, milk components, or milk temperature. This suggests that simultaneous vaccination of LSD and FMD can be administered without adverse effects.

The AlSi10Mg alloy has garnered significant attention for its application in laser powder bed fusion (L-PBF), due to its lightweight properties and good printability using L-PBF. However, the low production speed of the L-PBF process is the main bottleneck in the industrial commercialization of L-PBF AlSi10Mg alloy parts. Furthermore, while L-PBF AlSi10Mg alloy exhibits excellent mechanical properties, the properties are often over-specified compared to the target properties of parts traditionally fabricated by casting. To accelerate production speed in L-PBF, this study investigated the effects of process parameters on the build rate and mechanical properties of the AlSi10Mg alloy. Guidelines are proposed for high-speed additive manufacturing of the AlSi10Mg alloy for use in automotive parts. The results show a significant increase in the build rate, exceeding the conventional build rate by a factor of 3.6 times or more, while the L-PBF AlSi10Mg alloy met the specifications for automotive prototype parts. This strategy can be expected to offer significant cost advantages while maintaining acceptable mechanical properties of topology-optimized parts used in the automobile industry.

The emergence of ferrous-medium entropy alloys (FeMEAs) with excellent tensile properties represents a potential direction for designing alloys based on metastable engineering. In this study, an FeMEA is successfully fabricated using laser powder bed fusion (LPBF), a metal additive manufacturing technology. Tensile tests are conducted on the LPBF-processed FeMEA at room temperature and cryogenic temperatures (77 K). At 77 K, the LPBF-processed FeMEA exhibits high yield strength and excellent ultimate tensile strength through active deformation-induced martensitic transformation. Furthermore, due to the low stability of the face-centered cubic (FCC) phase of the LPBFprocessed FeMEA based on nano-scale solute heterogeneity, stress-induced martensitic transformation occurs, accompanied by the appearance of a yield point phenomenon during cryogenic tensile deformation. This study elucidates the origin of the yield point phenomenon and deformation behavior of the FeMEA at 77 K.

현대 사회에서 첨단 기술의 발전은 예술의 양상을 빠르게 변화시키고 있다. 생성형 인공지능 기술의 발전은 인류의 전유물이라 여겨왔던 창작 행위에 기존에는 보지 못했던 색다른 표현을 제공했다. 또한, 전통적 기법 을 고수하던 예술인들에게 새로운 예술 창작의 발현 방식을 제시하였다. 하지만 나날이 발전하는 인공지능 기술에 비해, 이를 활용한 구체적인 미디어아트 제작 과정 연구는 아직 국내에서는 미비하다. 본 논문은 인 공지능 기술을 활용한 미디어아트 해외 사례를 탐구한다. 그리고 Text-to-Image 인공지능 생성 모델과 게임 엔진 Unreal Engine 5를 이용하여, 국내에 자리 잡지 않은 생성형 인공지능을 활용한 작품 제작 방법론과 창 작자들에게 인공지능 이미지 생성 모델의 확장성을 제시한다.

Repetitive or excessive exposure to ultraviolet (UV) radiation causes oxidative stress-mediated skin photoaging through the overproduction of reactive oxygen species. Actinidia polygama is known as a medical plant used in oriental medicine for treating several diseases such as abdominal pain, stroke and rheumatoid arthritis. Recently, it was reported that A. polygama extract had anti-wrinkle and skin hydrating properties in ultraviolet B (UVB)-exposed hairless mice. However, the molecular biological mechanism of this extract on alleviating skin photoaging is still unknown. Therefore, we investigated the anti-photoaging effects of PB203, which is the powder of A. polygama extract, in the in vivo and in vitro photoaging models. First, PB203 showed 2,2’-azino-bis(3-ethylbenzothiazoline-6-sulfonic acid) and 2,2-diphenyl-1-picrylhydrazyl radical scavenging activities due to the presence of anti-oxidant components including flavonoids and polyphenols. In UVB-irradiated hairless mice, oral administration of PB203 (100 mg/ kg) significantly improved wrinkle formation, skin dehydration, elasticity and skin barrier function by decreasing the levels of matrix metalloproteinases (MMPs) and increasing those of collagen I, filaggrin, involucrin and loricrin. Especially, the reduced production of p-p38, p-c-Jun and p-c-Fos by PB203 reversed the elevated levels of MMPs mediated by UVB exposure, resulting in the upregulation of collagen I expression. Consistent with these animal data, PB203 remarkably enhanced the mRNA expression of collagen I, filaggrin, involucrin and loricrin, while suppressed that of MMPs in UVB-irradiated HaCaT cells. And PB203 increased the wound recovery rate of cells by promoting their proliferation and migration. Moreover, PB203 significantly recovered the activity of superoxide dismutase inhibited by UVB in both mice and cells. In conclusion, PB203, which protects skin from UVB-induced photodamage by exerting antioxidant properties, can be considered to have sufficient potential as a functional ingredient or therapeutic agent improving skin photoaging and related skin symptoms.

This study deals with replacement analysis of deteriorated equipment for improving productivity of production system. Frequent breakdown of the deteriorated equipment causes a situation that reduces productivity such as low product quality, process delay, and repair cost. However, the replacement of new equipment will be required a high initial investment cost, so it is important to analysis the economic feasibility. Therefore, we analyze the effect of the production system due to the aging effect of the equipment and the feasibility of equipment replacement based on the economic analysis. The process flow, working time, logistics movement, etc. are analyzed in order to build the simulation modeling for a ship and land switchboard production system. Using numerical examples, the economic feasibility analysis of equipment replacement through replacement of existing deteriorated equipment and additional arrangement of new facilities is performed.

Using data from flies collected with pitfall traps in 365 forests on a nationwide scale in Korea, the abundance and distribution changes of two families (Phoridae and Lauxaniidae) in Korean forests were predicted at the genus level according to two climate change scenarios: RCP 4.5 and RCP 8.5. The most suitable temperature for the 17 major genera was estimated using a weighted average regression model. Stichillus and Anevrina displayed the lowest optimum temperature with 7.6℃ and 8.5℃ in annual mean temperature, respectively, whereas Chonocephalus had the highest optimum temperature with 12.1℃. Among thirty genera, seven genera (four from Phoridae and three from Lauxaniidae), which showed their abundance in a bell-type or linear pattern along the temperature gradient, were used for predicting the distribution changes according to the future climate change scenarios. All the taxa of this study are expected to decrease in abundance and distribution as a function of temperature increase. Moreover, cold-adapted taxa were found to be more affected than warmadapted taxa.

Leuconostoc spp. are generally utilized as kimchi starters, because these strains are expected to have beneficial effects on kimchi fermentation, including improvement of sensory characteristics. Here, we developed a detection method for verifying the presence of the kimchi starter Leuconostoc mesenteroides WiKim33, which is used for control of kimchi fermentation. A primer set for multiplex polymerase chain reaction was designed based on the nucleotide sequence of the plasmids in strain WiKim33, and their specificity was validated against 45 different strains of Leuconostoc spp. and 30 other strains. Furthermore, the starter strain consistently tested positive, regardless of the presence of other bacterial species in starter kimchi during the fermentation period. Our findings showed that application of a strain-specific primer set for strain WiKim33 presented a rapid, sensitive, and specific method for detection of this kimchi starter strain during natural kimchi fermentation.

The entomopathogenic fungus Metarhizium anisopliae B is a powerful biological control agent against Monochamusalternatus, a crucial mediator of the pinewood nematode Bursaphelenchus xylophilus. In this study, production of destruxins(dtxs), insecticidal cyclic hexadepsipeptides, was monitored in the submerged culture of M. anisopliae B. Three typesof dtxs, i.e., destruxin A, B, and E, were produced during the culture. Among the three dtxs, the production yield ofdestruxin A was best, followed by destruxin B and E. Destruxin A production was increased when pH was controlledat 6.0, whereas production of destruxin E was not affected by the pH control. The highest yield of dtxs A, B, and Ewere 16.4, 7.3, and 6.1 mg L-1, respectively. Considering that process for dtxs production has not been optimized, M.anisopliae B has more powerful implication as a biocontrol agent.

This experiment was carried out to investigate the effect of harvesting time of Italian ryegrass (Lolium multiflorum Lam; IRG) in spring on dry matter (DM) yield. IRG cultivars ‘Kowinearly’ and ‘Greenfarm’ were seeded at 50 kg/ha and grown on rice paddy fields. There was no difference in growth characteristics between both varieties before winter. However, cold tolerance of Kowinearly was higher than that of Greenfarm, as demonstrated by post-wintering growth characteristics. The heading date of both varieties was affected by the spring weather. The IRG was harvested three times at 5-day intervals beginning from 9 May. The DM yield of Greenfarm was 6,306; 7,335; and 8,109 kg/ha, and that of Kowinearly was 7,498; 9,196; and 10,449 kg/ha at the three consecutive harvests. The delay of the harvesting time for 5 and 10 days increased the DM yield of Greenfarm by 16% and 29% and that of Kowinearly by 23% and 39%, respectively, compared to the yield at first harvest (p < 0.05). Therefore, IRG harvest later than early to mid-May is expected to increase productivity. The feed values of Greenfarm were: 12.2% of crude protein (CP), 34.5% of acid detergent fiber (ADF), 57.7% of neutral detergent fiber (NDF), 61.6% of total digestible nutrients (TDN), and 72.3% of in vitro DM digestibility (IVDMD). For Kowinearly, these values were 16.4% of CP, 30.4% of ADF, 52.7% of NDF, 64.9% of TDN and 79.0% of IVDMD.

The present study investigated the effects of different seeding rates on growth characteristics and seed productivity of the “Kowinearly” cultivar of Italian ryegrass (Lolium multiflorum Lam.) in paddy fields. Sowing Kowinearly in paddy fields under growing rice at the rates of 20, 30, 40, and 50 kg/ha resulted in seed yields of 1.57, 1.92, 2.06, and 2.09 ton/ha, respectively. Seed yield of Kowinearly was the highest at a seeding rate of 50 kg/ha (p<0.05), at which the cultivar was able to survive in winter and the weed ratio was low. Under these conditions, most growth characteristics such as winter survival (85%), weed ratio (10%), stems per square meter (1,006) were superior than those sown at other seeding rates (p<0.05). In addition, it has been reported that the economic efficiency of the 50 kg/ha seeding rate was higher than that of the other seeding rates.

This study was conducted from October 2014 to May 2015 to explore forage production and feed values of Italian ryegrass, Rye and whole crop barley as winter forage crops in the Southern region of Korea. The experimental location was over 10 points for each species and each sampling point area was 1 m² (Width: 1 m × Length: 1 m). Air mean temperature and rainfall in the Southern region of Korea during the experimental period was 6.95 ± 5.75℃ and 70.45 ± 54.68 mm, respectively. Fresh forage yield of Italian ryegrass, the most cultivated forage in the Southern region of Korea, was 44.4 ± 7.0 ton/ha. The percentage of dry matter for whole crop barley was 28.9 ± 7.0%. Crude protein (CP) was higher in Italian ryegrass (10.7 ± 5.3%) while total digestible nutrient (TDN) had the highest value in whole crop barley. Crude protein was not significantly different by location. However, the neutral detergent fiber (NDF), acid detergent fiber (ADF) and total digestible nutrient value of forage from Jeonbuk province were higher than in forage from Gyeongnam province.

본 연구에서는 일시적으로 관절염 증상 완화에 효과가 있는 건강기능식품인 Rosa Canina L.의 지표성분인 hyperoside를 분석하였다. 국내·외 분석법과 저널들을 참고하여 hyperoside의 HPLC 분석법을 확립하였다. Hyperoside의 HPLC 분석법은 이동상과 컬럼에 대한 실험을 통하여 Capcell Pak C18 MG II 컬럼으로 353 nm으로 설정하였다. 시험 분석법 검증은 hyperoside에 대한 직선성, 정확성, 정량한계(LOQ) 및 정밀성을 수행하였다. Hyperoside은 2~60 μg/mL 농도에서 우수한 직선성(R2 = 0.999)을 나타내었다. 정확성의 회수율은 98~99%로 관찰되었으며, LOQ는 0.393 μg/mL으로 나타났고, 재현성에 대한 정밀성은 상대표준편차가 0.6~2.6%로 관찰되었다.