This study aimed to develop the in vitro method using domestic commercial diets to estimate nutrient digestibility in dogs. The existing in vitro method were tested and compared with literature data to develop new in vitro method. The development of in vitro method progressed as follows: modification of pepsin solution to an activated form and supplementation with 1% lipase. All the in vitro method progressed to 4 hours of stomach simulation and 2 hours of small intestine simulation. In vivo digestibility was measured using the same diets as beagle dogs. The supplementation of lipase methods showed significantly improved (p < 0.05) DM, OM, and EE than the existing and modified pepsin solution methods. The correlation between in vitro and in vivo data in DM, OM, and EE digestibility was high (r2 = 0.889, 0.907, and 0.721, respectively), and the correlation between in vitro and in vivo data in CP and GE digestibility was medium (r2 = 0.681 and 0.536, respectively). The current in vitro method is similar to in vivo digestibility and helps potentially predict digestibility for dogs. In conclusion, this developed in vitro method suggests that it can help estimate the nutrient digestibility of dogs' diets without in vivo experiments.

산오이풀(Sanguisorba hakusanensis)은 한국의 자생식물 이며 정원소재로써 가치가 있지만, 생육 및 생리적 특성 및 정 원 적응 여부에 대하여 알려진 정보가 많지 않아 이용에 어려 움을 겪고 있다. 본 연구에서는 자생식물인 산오이풀의 관수 주기 및 NaCl 농도에 따른 생장, Fv/Fm, NPQ, 성분 변화, 무기성분 변화를 조사하여 내건 및 내염성 보유 여부, 생육 한 계 범위, 스트레스 환경에서 생육을 유지하기 위한 반응을 파 악하고자 했다. 실험 결과 NaCl 무처리구의 관수주기에 따른 성분 분석에서 엽록소 함량의 감소를 제외하고 유의한 차이가 나타나지 않았으나 이는 토양수분함량이 건조 스트레스를 유 발할 정도로 감소하지 않았기 때문으로 보인다. 염 처리에서 는 2주 이후 급격한 스트레스 반응이 나타났고 3주차부터 고 사하기 시작하여 6주차에 모든 개체가 최종 고사했다. 이러한 결과는 2주까지 염 스트레스에 의해 유발되는 2가지 스트레 스 중 초기에 나타나는 삼투 스트레스에는 저항하였으나 이후 나타나는 NPQ의 감소 등 이온 스트레스에 의해 유발된 광합 성 기구 붕괴로 인해 정상적인 생육을 유지할 수 없었기 때문 에 나타난 것으로 보인다. 그러나 무기이온 분석은 이온 스트 레스에 저항하기 위한 메커니즘의 존재 가능성을 시사하였다. 상대적으로 염 농도가 낮을 때에는 세포내 Ca2+ 및 K+ 수준이 높았는데, 이는 Ca2+ 수준이 높아짐에 따라 Na+를 세포 밖으 로 방출시키는 단백질, Na+를 K+와 함께 수송하는 단백질이 기능하여 Na+축적을 지연시키는 반응이 있었음을 시사한다. 그러나 NaCl을 고농도로 처리했을 때는 이러한 반응이 관찰 되지 않았다. 따라서 산오이풀은 염 스트레스에 의해 야기되 는 삼투 스트레스에 강한 저항성을 가지고 있고 이온 독성을 줄이기 위한 메커니즘으로 Na+ 세포내 축적을 지연시키는 것으로 보이지만, 심한 염 스트레스를 받았을 때 나타나는 급격 한 반응에서 이러한 메커니즘이 기능하지 못하고 이온독성에 매우 취약한 것으로 여겨진다. 본 연구를 통해 자생식물인 산 오이풀의 활용을 늘리는 데 기초적인 자료를 제공할 수 있을 것으로 생각된다.

As the importance of radioactive waste management has emerged, quality assurance management of radioactive waste has been legally mandated and the Korea Radioactive Waste Agency (KORAD) established the “Waste Acceptance Criteria for the 1st Phase Disposal Facility of the Wolsong Lowand Intermediate-Level Waste Disposal Center (WAC)”, the detailed guideline for radioactive waste acceptance. Accordingly, the Korea Atomic Energy Research Institute (KAERI) introduced a radioactive waste quality assurance management system and developed detailed procedures for performing the waste packaging and characterization methods suggested in the WAC. In this study, we reviewed the radioactive waste characterization method established by the KAERI to meet the WAC presented by the KORAD. In the WAC, the characterization items for the disposal of radioactive waste were divided into six major categories (general requirements, solidification and immobilization requirements, radiological, physical, chemical, and biological requirements), and each subcategories are shown in detail under the major classification. In order to satisfy the characterization criteria for each detailed item, KAERI divided the procedure into a characterization item performed during the packaging process of radioactive waste, a separate test item, and a characterization item performed after the packaging was completed. Based on the KAERI’s radioactive waste packaging procedure, the procedure for characterization of the above items is summarized as follows. First, during the radioactive waste packaging process, the characterization corresponding to the general requirements (waste type) is performed, such as checking the classification status of the contents and checking whether there are substances unsuitable for disposal, etc. Also, characterization corresponding to the physical requirements is performed by checking the void fraction in waste package and visual confirmation of particulate matter, substances containg free water, ect. In addition, chemical and biological requirements can be characterized by visually confirming that no hazardous chemicals (explosive, flammable, gaseous substances, perishables, infectious substances, etc.) are included during the packaging process, and by taking pictures at each packaging steps. Items for characterization using separate test samples include radiological, physical, and chemical requirements. The detailed items include identification of radionuclide and radioactivity concentration, particulate matter identification test, free water and chelate content measurement tests, etc. Characterization items performing after the packaging is completed include general requirements such as measuring the weight and height of packages and radiological requirements such as measurements of surface dose rate and contamination, etc. All of the above procedures are proceduralized and managed in the radioactive waste quality assurance procedure, and a report including the characterization results is prepared and submitted when requesting acceptance of radioactive waste. The characterization of KAERI’s radioactive waste has been systematically established and progressed under the quality assurance system. In the future, we plan to supplement various items that require further improvement, and through this, we can expect to improve the reliability of radioactive waste management and activate the final disposal of KAERI’s radioactive waste.

Tuberculosis is a potentially deadly infectious disease caused by the Mycobacterium tuberculosis (M. tuberculosis). Tuberculosis is diagnosed by proving the M. tuberculosis in sputum samples based on the results of acid-resistant staining, culture, and nucleic acid amplification tests. However, there is a report that the detection rate of M. tuberculosis is low in acid-resistant staining using tissue specimens. It has been suspected that the cause is a potential loss of acid resistance by the organic solvents used for tissue specimen preparation. Therefore, this study was pursued to find out if Gram staining and fluorescent staining in addition to acid-resistant staining would be helpful in diagnosing tuberculosis. We used four tissue (lung, small intestine, large intestine, and lymph node) samples with chronic granulomatous inflammation observed in HE staining and positive results in real-time PCR. These detection rates and staining properties were investigated through microscopic examination using the Ziehl-Neelsen, Gram, and Auramin rhodamine staining. In this studies, M. tuberculosis were observed by Ziehl-Neelsen, Gram, and Auramin rhodamine staining in all four samples. In the evaluation of clinical microbiology proficiency testing (CMPT), the Ziehl-Neelsen and Gram staining were the same result, but the Auramin rhodamine staining was relatively low. These data indicated that Gram staining is useful for detecting M. tuberculosis in formalin-fixed tissue specimens. Therefore, if the Ziehl-Neelsen and Gram staining are combined as the M. tuberculosis staining method in tissue specimens, a better direction may be provided for tuberculosis diagnosis.

When decommissioning a nuclear power plant, the structure must be made to a disposable size. In general, the cutting process is essential when dismantling a nuclear power plant. Mainly, thermal cutting method is used to cutting metal structures. The aerosols generated during thermal cutting have a size distribution of less than 1 μm. The contaminated structures are able to generate radioactive aerosols in the decommissioning. Radioactive aerosols of 1 μm or less are deposited in the respiratory tract by workers’ breathing, causing the possibility of internal exposure. Therefore, workers must be protected from the risk of exposure to radioactive aerosols. Prior knowledge of aerosols generated during metal cutting is important to ensure worker safety. In this study, the physical and chemical properties of the aerosol were evaluated by measuring the number and mass concentrations of aerosols generated when cutting SUS304 and SA508 using the laser cutting method. High-resolution aerosol measuring equipment (HR-ELPI+, DEKATI) was used to measure the concentration of aerosols. The HR-ELPI+ is an impactor-type aerosol measuring equipment that measures the aerosol number concentration distribution in the aerodynamic diameter range of 6 nm to 10 um in real-time. And analyze the mass concentration of the aerosol according to the diameter range through the impactor. ICP-MS was used for elemental mass concentration analysis in the aerosol. Analytical elements were Fe, Cr, Ni and Mn. For the evaluation of physical and chemical properties, the MMAD of each element and CMAD were calculated in the aerosol distribution. Under the same cutting conditions, it was confirmed that the number concentration of aerosols generated from both materials had a uni-modal distribution with a peak around 0.1 um. CMAD was calculated to be 0.072 um for both SUS304 and SA508. The trend of the CMAD calculation results is the same even when the cutting conditions are changed. In the case of MMAD, it was confirmed that SUS304 had an MMAD of around 0.1 μm in size for only Fe, Cr and Mn. And SA508, Fe, Cr, Ni and Mn were all confirmed to have MMAD around 0.1 μm in size. The results of this study show that a lot of aerosols in the range of less than 1 μm, especially around 0.1 μm in size, are generated when metal is cut using laser cutting. Therefore, in order to protect the internal exposure of workers to laser metal cutting when decommissioning NPPs, it is necessary to protect from nano-sized aerosols beyond micron size.

항공 및 지리 공간 기술은 연구자 및 농업관련 실무자들이 더욱더 쉽게 접근할 수 있게 되었으며, 이러한 기술은 농업과 임업에 있어 현재 병해충 관리의 변화에 중추적인 역할을 할 수 있다. 지난 20년 동안 위성, 유무인항공기, 스펙트럼 센서들, 정보 시스템 및 자동화 현장 장비들의 기술들은 병해충을 감지하고, 특정 지점에 대한 병해충을 방제하는데 사용되어져 왔다. 빅 데이터 기반한 인공 지능과 함께 항공 및 지리 정보 기술의 가용 함에도 불구하고 이러한 기술을 사과 IPM에 적용하는 것은 아직 실현되지 않았다. 본 논문은 사과연구소에서 수행한 사례 연구를 통해 사과 IPM 개선에 활용할 수 있는 항공 및 지리 정보기술의 발전과 한계에 대해 논하고자 한다.

The purpose of this study was to identify the structure and characteristics for the reproduction of the armor in the Unified Silla period, and then reproduce and utilize it as a cultural content. In the armor reproduction project excavated from Jaemaejeong, Gyeongju. Jaemaejeong armor is consisting of Singap (身甲, body armor), Sanggap (裳甲, hip armor), and Sangbakgap (上膊甲, upper arm armor) at the time of excavation. Unlike the armor of the Three Kingdoms period, Singap and Sanggap are separated. Singap is Yangdangsik (裲襠式, side opening method) and Gyunggap (頸 甲, gorget) was not unearthed, Sangbakgap was divided into a part that protects the left and right upper arms and a part that protects the chest, so that the unexcavated head and neck cover of the helmet can be protected to the shoulder. In addition, in the case of Chalgap (札甲, lamellar armor), the Oejungsik (外重式, folded from outside to inside) is mainly used, but it is peculiar that Naejungsik (內重式, folded from inside to outside) is used in Sangbakgap of Jaemaejeong armor. It is presumed that this was used as a method to ensure that the armor were closely attached to the human body. In order to design with the parade armor of Gochwidae in Gyeongju based on the reproduced Jaemaejeong armor, the designer’s imagination and historical work of the times were involved due to the characteristics of performance costumes. Reproduced armor as a cultural content should be considered indispensable to simplify and lighten clothing suitable for performances based on the excavated historical armor.

PURPOSES : The purpose of this study is to investigate the effects of urban road characteristics on temperature changes in urban areas using surface thermal temperature. METHODS : This study measured the surface thermal temperature of each road component from urban roads, analyzed the effect of the road component characteristics and vegetation on temperature, and estimated the regression models. RESULTS : As a result, the mean temperature was 27.3 ℃ on the roadway, 25.5 ℃ on the vegetated median, and 22.9 ℃ on the sidewalks. The roadside temperature was 26.14 ℃ with surrounding buildings and 23.82 ℃ near green spaces. The temperature with street trees was lower (24.45 ℃) than without (28.38 ℃) while it was 23.96 ℃ with vegetated median and 25.64 ℃ without. The temperatures were lower (24.70 ℃) on the permeable surface than on the impermeable surface (28.38 ℃). Model estimates show that the temperature decreases by 0.007 ℃ with an increase of 1 m² green (permeable space) space and the temperature with buildings tends to be 1.729 ℃ higher than that with green space. As green space increases by 1 m², the temperature tends to decrease by 0.017 ℃ on the roadway and by 0.012 ℃ on the sidewalk. Shade effect models show that street trees with shade affect temperature reduction by -3.884 ℃ on roadways and -3.314 ℃ on sidewalks. CONCLUSIONS : The results of this study demonstrate the differing effects of road characteristics on temperature. The roadway is more sensitive than the sidewalk to temperature changes and roadside vegetation, ambient green space, and pavement permeability contribute to temperature reduction.

In a previous study, it was reported that enzymatic hydrolysis under pressurization could be a new method which could produce arginine dipeptide and free amino acid in anchovy hydrolysate as salty enhancer at optimal condition. Powder is more efficient than liquid in terms of transport and storage stability. For the purpose of producing spray dried powder of various salt contents was investigated the effect of different salt concentration of anchovy hydrolysate on spray dried powder properties. The anchovy hydrolysate of various salt contents(in the range of approximately 0.7- 19.8% w/w) prepared adding the fish sauce (Dae-Young fish market) at inlet drying air temperatures of 120°C and 140°C. The process yield and physicochemical properties such as moisture content, bulk density, hygroscopicity and the morphology (EDS, XPS, XRD) of the anchovy hydrolysate powder was measured. The glass transition temperatures (Tg) of the powders equilibrated under various water activities were determined using a differential scanning calorimeter (DSC). Different drying conditions and salt concentration could generate anchovy hydrolysate powders with different process yield, bulk density and moisture content. The spray-dried anchovy hydrolysate powder was confirmed by XRD to be a mixture of an amorphous substances and crystalline salts. The energy dispersive X-ray spectrometer (EDS) and X-Ray Photoelectron Spectroscopy (XPS) analysis demonstrated that the surface NaCl concentration of the powders increased with an increasing drying air temperature. Increasing moisture adsorption of the anchovy hydrolysate powders resulted in a Tg reduction. It is suggested that producing spray dried anchovy hydrolysate for the industrial use is the use of the feed salt concentration of not lower than % w/w and inlet air temperature at 120°C, 140°C

The aim of this study was to use an in vitro method and estimate glycaemic index (GI) from porridges to determine the digestibility of porridges. Glycaemic index’s concept is to classify foods on the basis of their postprandial blood glucose response. The GI of a foodstuff is generally measured by determining the increment in blood glucose concentration after the consumption of a test meal over a set period of time and comparing it with an isoglucosidic control meal (normally white bread or glucose) and expressed as a percentage. In this study, the 5 porridges were studied for their starch digestibility. The available starch contents of the samples varied from 65~85 g/100 g dry solids. From in vitro digestion, the porridge samples were Medium glycaemic index foods with calculated GIs ranging from 56 to 67.

The present paper proposes an categorization of commercial fluid products. A total of 21 commercial fluid products were analyzed(porridges, universal design foods, foods for special medical purposes) corresponding to 11 different commercial brands. Joint consideration has been made of viscous behavior (flow and thixotropy) and viscoelastic behavior (oscillatory testing). Rheological measurements were fitted to different rheological mathematical models, and a total of 4 parameters were generated. Our results correspond to three different classes. The three defined classes have been named in a way similar those most commonly used in the literature. Each class has been defined from the parameters allows us to know the common rheological characteristics of any of the products belonging to a given class.

Pseudococcus longispinus, a notorious cosmopolitan pest species of mealybugs, known to be distributed indoors in Korea since 2002, is found to be mixed with another species, Pseudococcus orchidicola. Finding P. orchidicola as a pest of tropical plants in Korea is rather unexpected because of their main distribution in Pacific area and South Asia. However, all the available information from morphology, molecule and advices on identification from mealybug specialists indicated this is best matching P. orchidicola. Morphological, molecular and some biological notes on P. orchidicola are provided with some adult and nymphal images, and compared with P. longispinus. A full discussion mainly on identity and distribution of P. orchidicola is given.