This study evaluated the immunogenicity of the Bacillus Calmette-Guérin (BCG) vaccine in a guinea pig model to refine preclinical assessment methods. 24 guinea pigs were divided into four groups for immunohistochemical, histopathological, and molecular analyses, including qRT-PCR and ELISA. The ELISA results revealed significant elevations in interleukin 2 (IL-2), interferon-gamma (IFN- ), and tuberculosis-specific antibodies in vaccinated guinea pigs, particularly γ notable after 6 weeks. Although lung cytokine levels remained unchanged, spleen gene expression showed significant differences in interleukin-17, interleukin-12, interleukin-1β, and C-X-C motif chemokine ligand 10 after 6 weeks. Immunohistochemistry revealed peak IL-2 expression at 8 weeks and significant IFN-γ and TNF-α expression at 6 weeks. This study confirmed the effectiveness of BCG vaccine in guinea pigs, providing crucial insights for future tuberculosis vaccine development and standardizing immune response indicators.

Graphene fiber is considered as a potential material for wearable applications owing to its lightness, flexibility, and high electrical conductivity. After the graphene oxide (GO) solution in the liquid crystal state is assembled into GO fiber through wet spinning, the reduced graphene oxide (rGO) fiber is obtained through a reduction process. In order to further improve the electrical conductivity, herein, we report N, P, and S doped rGO fibers through a facile vacuum diffusion process. The precursors of heteroatoms such as melamine, red phosphorus, and sulfur powders were used through a vacuum diffusion process. The resulting N, P, and S doped rGO fibers with atomic% of 6.52, 4.43 and 2.06% achieved the higher electrical conductivities compared to that of rGO fiber while preserving the fibrious morphology. In particular, N doped rGO fiber achieved the highest conductivity of 1.11 × 104 S m−1, which is 2.44 times greater than that of pristine rGO fiber. The heteroatom doping of rGO fiber through a vacuum diffusion process is facile to improve the electrical conductivity while maintaining the original structure.

Resistance to extended-spectrum cephalosporin in Enterobacteriaceae is increasingly prevalent in South Korea. This study aims to explore the distribution of AmpC genes in Proteus mirabilis isolated from stray and hospital-admitted companion animals in South Korea. AmpC β-lactamases hold clinical significance due to its potential to facilitate antimicrobial resistance to cefoxitin, cefazolin, and most penicillins. A total of 163 bacterial isolates belonging to the Enterobacteriaceae family were collected from dogs (n = 158) and cats (n=5). Of them, 134 isolates were from hospital-admitted animals, while 29 isolates from stray animals. Boronic acid tests and antimicrobial susceptibility tests were conducted for an initial screening to detect AmpC β-lactamase resistant P. mirabilis. Gene-specific PCRs were conducted to identify the type of AmpC genes, which include six groups (MOXM, CITM, DHAM, ACCM, EBCM, and FOXM), in the resistant isolates. The boronic acid disk tests revealed 45 (27.6%) positive isolates out of 163 isolates tested. Of these 45 isolates, six were determined to harbor the EBCM gene, 13 for CITM, one for FOXM, and one for DHAM by single detection PCR. No isolates carried for ACCM or MOXM. Thus, a total of 21 out of 163 isolates (12.9%) were demonstrated to possess AmpC genes. No isolates contain more than one group of AmpC gene family. A significantly higher percentage of P. mirabilis was found to possess AmpC genes compared to past studies. Therefore, the increasing trend in antimicrobial resistance in P. mirabilis indicates a dire need to monitor antimicrobial prescription in the veterinary field.

농촌진흥청 국립원예특작과학원에서는 2017년에 절화 수명이 길고 수량이 많은 연한 핑크색의 스프레이 장미 ‘Pink Shine’ 을 육성하였다. 모본은 ‘Fire Flash’로 붉은 복색의 스프레이 장미이며, 부본은 ‘Pink Charm’으로 핑크색이며 흰가루병에 강하다. 이 두 품종을 2012년 인공교배하여 이듬해인 2013년 1월에 파종, 9cm 포트 묘에 정식하여 관능 평가 실시 후 도태시켜 39개체 의 실생을 얻었다. 이후 화형, 화색, 꽃잎 수, 절화수량, 병 저항성 등을 고려하여 2015년까지 5개체를 선발하여 유사 품종인 ‘Missha’를 대조로 하여 2017년까지 3차에 걸친 특성 검정을 실시하였다. 그 결과 가장 우수한 ‘원교 D1-325’를 최종선발하여 ‘Pink Shine’으로 명명 후 2018년 3월 22일 품종보호출원(제 2018-212호)하여 2019년 6월 21일에 품종보호권(제7786호)이 등록되었다. 화색은 연한 핑크색(RHS, R36D)이며 잎의 색은 녹색(RHS, G137A)으로 대조 품종 ‘Missha’와 동일하였다. 꽃잎 수는 67.8개, 화폭 5.4cm, 화고 3.2cm로 ‘Missha’보다 컸으며 평방미터당 연간 절화수량은 131본, 절화수명은 15.3일로 ‘Missha’ 보다 우수하였다.

PURPOSES : It is well known that low temperature cracking is one of the most serious distresses on asphalt pavement, especially for northern U.S. (including Alaska), Canada and the northern part of south Korea. The risk of thermal cracking can be numerically measured by estimating thermal stress of a given asphalt mixture. This thermal stress can be computed by low temperature creep testing. Currently, in-direct tensile (IDT) mixture creep test mentioned in AASHTO specification is used for measuring low temperature creep properties of a given asphalt mixture. However, IDT requires the use of expensive testing equipment for performing the sophisticated analysis process, however, very few laboratories utilize this equipment. In this paper, a new and simple performance test (SPT) method: bending beam rheometer (BBR) mixture creep testing equipment is introduced, and the estimated experimental results were compared with those of conventional IDT tests. METHODS: Three different asphalt mixtures containing reclaimed asphalt pavement (RAP) and roofing shingles were prepared in the Korea Expressway Corporation (KEC) research laboratory. Using the BBR and IDT, the low temperature creep stiffness data were measured and subsequently computed. Using a simple power-law function, the creep stiffness data were converted into relaxation modulus, and subsequently compared. Finally, thermal stress results were computed from relaxation modulus master curve using Gaussian quadrature approach with condierations of 24 Gauss number. RESULTS: In the case of the conventional asphalt mixture, similar trends were observed when the relaxation modulus and thermal stress results were compared. In the case of RAP and Shingle added mixtures, relatively different computation results were obtained. It can be estimated that different experimental surroundings and specimen sizes affected the results. CONCLUSIONS: It can be said that the BBR mixture creep test can be a more viable approach for measuring low temperature properties of asphalt mixture compared to expensive and complex IDT testing methods. However, more extensive research and analysis are required to further verify the feasibility of the BBR mixture creep test.

In the current study, a total of 102 common Todarodes pacificus squid caught in the East Sea were investigated for parasitological research. The results revealed that 33 (32.35%) out of 102 squid were infected by Nybelinia surmenicola, the mean intensity was 5.58 parasites per squid, and the maximum abundance was 11. Morphological analysis using a field emission scanning electron microscope showed the characteristic features of N. surmenicola. Molecular identification based on the 28S rRNA gene confirmed the isolated parasite as N. surmenicola, while phylogenetic analysis revealed that N. surmenicola isolated in this study was clustered with N. surmenicola isolated from Japan. This is the first report of phylogenetic characterization of N. surmenicola isolated from Korea.

배초향은 항동맥경화나 항박테리아의 특성을 가지는 한약재에 널리 사용되는 영년생 약용식물이다. 연구의 목적은 수경재배에서 배양액의 종류와 PPFD값에 따른 배초향의 생장 및 항산화 물질의 변화를 조사하는 것이다. 배초향은 주야간 16:8 시간의 일장조건에서 150과 200 μmol·m-2·s-1 PPFD 조건과 일본원시(HES), 서울시립대(UOS), 유럽채소연구소(EVR), 오오츠카 배양액(OTS)을 이용하여 6주간 재배하였다. OTS 배양액조 건에서 자란 배초향의 지상부 및 지하부 건물중은 다른 배양액 처리구와 비교하여 유의적으로 높았다. 배초향의 틸리아닌 함량은 OTS 처리에서 가장 높았으며 다음으로 EVR, HES, UOS 순서로 낮아졌다. 총 아카세틴의 함량은 EVR처리에서 가장 높았으나 OTS처리와는 유의적 차이를 보이지 않았다. 또한 200 μmol·m-2·s-1 PPFD 조건에서 자란 배초향은 PPFD 150처리구와 비교하여 유의적으로 생체중과 건물중이 증가하였으며 기능성 물질은 틸리아닌과 아카세틴의 함량도 높았다. 본 연구는 수경재배 방식을 이용하여 식물공장에서 배초향을 재배할 경우 200 μmol·m-2·s-1 PPFD 조건과 OTS 배양액 조건에서 경제적인 광원조건으로 최적 바이오매스 생산량과 틸라아닌과 아카세틴의 함량을 증가시킬 수 있을 것으로 제안한다.

For useful research animal to study human’s disease and for xenotransplantation donor, pig was studied to improve the quality of in vitro production (IVP). But, still the developmental ability of in vitro porcine embryos is still lower than in vivo embryos. Using a antioxidant is one of the strategy to overcome the drawback of in vitro producted embryos by protecting the oocyte from free radicals during in vitro maturation (IVM). Resveratrol, one of the plant-derived polyphenol antioxidants, have been used as effective antioxidants. Therefore, resveratrol treatment during IVM of porcine oocytes is expected to improve efficiency of the IVP by reducing free radical accumulation. In this study, we designed control (no treated) and resveratrol treatment groups (0, 2 and 4uM), evaluated maturation rate, cleavage rate, blastocyst formation rate and total cell number. Additionally GSH and ROS accumulation levels were measured via staining oocytes. In the results, maturation rate had not shown significant difference among the groups. However, in further development, not only the results of cleavage rate (0uM : 84.64±2.65 vs 4uM : 93.67±2.36, p<0.05) and blastocyst formation rate (0uM : 6.39± 0.90, vs 4uM : 13.67±2.32, P<0.05) were significantly increased in 4uM resveratrol treated group, and result of total cell number (0uM : 22.47±0.76 vs 2, 4uM : 30.35±1.76, 27.65±1.23, P<0.05) also shown significant difference in 2, 4uM resveratrol groups with control. GSH accumulated levels of matured oocytes in resvetrol treated groups were significantly higher than control. Meanwhile ROS levels of treated groups were significantly reduced [GSH (0uM : 142±10.49 vs 2, 4uM : 163.2±3.29, 169.7±0.94, P<0.05), ROS (0uM : 170.2±7.76 vs 2, 4uM : 118.6±7.90, 130±7.07, P<0.05)]. From these results, we conclude the treatment of resveratol improved further development of porcine embryos by regulating intracellular GSH, ROS levels during porcine IVM. Therefore, exogenous antioxidants such as a resveratol can be supportive substances for obtaining the improved quality of IVP.

The sintering mechanisms of nanoscale copper powders have been investigated. A molecular dynamics (MD) simulation with the embedded-atom method (EAM) was employed for these simulations. The dimensional changes for initial-stage sintering such as characteristic lengths, neck growth, and neck angle were calculated to understand the densification behavior of copper nano-powders. Factors affecting sintering such as the temperature, powder size, and crystalline misalignment between adjacent powders have also been studied. These results could provide information of setting the processing cycles and material designs applicable to nano-powders. In addition, it is expected that MD simulation will be a foundation for the multi-scale modeling in sintering process.