장내 미생물 군집은 소화 과정, 면역 시스템, 질병 발생 등 숙주의 다양한 면에 광범위한 영향을 주는 것으로 알려져 있으며, 주요 장내 미생물 종은 숙주의 생리 기능에 핵심적인 역할을 수행한다고 발표된 바 있다. 곤충의 장내 미생물 군집에 관한 연구가 최근 활발히 이루어지고 있으며, 이들 연구는 주로 장내 미생물 군집과 기생충, 병원체 간의 상호작용, 종간의 신호 전달 네트워크, 먹이의 소화 과정 등을 중심으로 이루어지고 있다. 이러한 연구들은 대부분 Illumina MiSeq을 활용하여 16S rRNA 유전자의 V1부터 V9 영역 중 선택된 특정 부분을 대상으로 짧은 서열 정보를 대상으로 진행되었다. 그러나, 최근에는 PacBio HiFi 기술이 상용화되면서 16S rRNA의 전장 분석이 가능할 수 있게 되었다. 이번 연구는 장수말벌(Vespa mandarinia)의 해부를 통해 gut과 carcass 부분을 분리한 뒤, 각 샘플을 Illumina MiSeq과 PacBio HiFi 기술을 활용하여 미생물 군집 간의 차이점을 확인하기 위하여 수행되었다.

Molten Salt Reactor, which employs molten salt mixture as fuel, has many advantages in reactor size and operation compared to conventional nuclear reactor. In developing Molten Salt Reactor, the behavior of fission product in operation should be preliminary evaluated for the correct design of reactor and its associated system including off-gas treatment. In this study, for 100 Mw 46 KCl- 54 UCl3 based Molten Salt Reactor with operating life time of 20 year, the fission product behavior was estimated by thermodynamic modeling employing FactSage 8.2. Total inventory of all fission product were firstly calculated using OpenMC code allowing depletion during neutronic calculation. Then, among all inventory, 46 element species from Uranium to Holmium were chosen and given to the input for equilibrium module of Factsage with its mass. In phase equilibrium calculation, for the correct description of solution phase, KCl-UCl3 solution database based on modified quasichemical model in the quadruplet approximation (ANL/CFCT-21/04) was employed and the coexisting solid phase was assumed to pure state. With the assumption of no oxygen and moisture ingress into reactor system, equilibrium calculation showed that 1% of solid phase and of gas phase were newly formed and, in gas phase, major species were identified : ZrCl4 (47%), Xe (33%), UCl4 (14%), Kr (5%), Ar (1%) and others. This result reveals that off-gas treatment of system should account for the appropriate treatment of ZrCl4 and UCl4 besides treatment of noble gas such as Xe and Kr.

According to the Nuclear Safety and Security Commission (NSSC) Notice No. 2021-26 “Delivery Regulations for the Low- and Intermediate Level Radioactive Waste (LILW)”, the activity of 3H, 14C, 55Fe, 58Co, 60Co, 59Ni, 63Ni, 90Sr, 94Nb, 99Tc, 129I, 137Cs, 144Ce, and gross alpha must be identified. Currently, the scaling factor of the dry active waste (DAW) for LILW is applied as an indirect evaluation method in Korea. The analyses are used the destructive methods and 55Fe, 60Co, 59Ni, 63Ni, 90Sr, 94Nb, 99Tc, and 137Cs, which are classified as nonvolatile nuclides, are separated through sequential separation and then measured by gamma detector, liquid scintillation counter (LSC), alpha/beta total counter (Gas Proportional Counter, GPC), and ICP-MS. We will introduce how to apply the existing nuclide separation method and improve the measurement method to supplement it.

본 연구는 국내 자생하는 진달래속(Rhododendron) 종들의 종자 휴면유형 분류 및 발아특성 구명을 목표로 하였다. 진달래속 종들의 배는 형태적휴면(MD)이 없는 완전히 발달된 직선(linear) 형태였으며, 만병초 및 꼬리진달래 종자는 탈리 시점에 이미 휴면이 없는 것으로 밝혀졌다. 반면에 털진달래 종자는 population 수준에서 부분적으로 생리적휴면(PD)을 가지고 있는 것으로 나타났다. 털진달래의 이러한 생리적휴면 (PD)은 외생 지베렐린(GA3) 1,000mg･L-1 처리를 통해 타파될 수 있었다. 그러나 4℃에서의 저온층적처리는 털진달래 종자 휴면 타파에 효과가 없는 것으로 나타났다. 종합적으로 판단 했을 때, 진달래속(Rhododendron) 종들의 적정 발아 환경조 건은 광조건･25/15℃(만병초), 암조건･20/10℃(꼬리진달래), 광 조건･25/15℃(털진달래)로 확인된다. 진달래속(Rhododendron) 에서의 종간 차이(interspecific variation)로 인해 모든 종이 종자 휴면유형 또는 발아특성에서 구별이 되었다. 본 연구는 국내 자생하는 진달래속(Rhododendron) 종들의 생리･생태 특성을 이해하는 데 이용될 수 있을 것이다.

To enhance mechanical properties through improvement of dispersion stability of carbon black (CB) in epoxy resins, fluorine functional groups were introduced on the CB surface by fluorination. The changes in the chemical properties and dispersion stabilities after fluorination were evaluated with different partial pressures of fluorine gas. The mechanical properties of the fluorinated CB/epoxy composites were evaluated by the test of tensile, impact strengths and creep behavior. The fluorinated CB/epoxy composites showed approximately 1.6 and 1.1 times enhancement in the tensile and impact strengths compared to that of neat epoxy, respectively. Moreover, when a constant load was applied at 323 K, the fluorinated CB/epoxy composites lasted longer and had smaller strain changes than those of the raw CB/epoxy composites. Thus, well-dispersed CB by fluorination in epoxy resins effectively transfers mechanical stress.

Fibrous adsorbents, such as activated carbon fibers (ACF) have acknowledged advantages of rapid adsorption rate and ease of modification compared with granular and powdered adsorbents. Based on the surface modification of lyocell-based ACF, we observed different surface characteristics of ACF samples with variation in the mixing ratio and impregnation time of H3PO4, NaCl, and KMnO4 solution. For an engineering application, we also explored the adsorption characteristics of thusproduced ACF samples onto volatile organic compounds (VOCs). Isothermal adsorption experiments were performed using toluene and benzene as adsorbates. Results indicate that both physical and chemical surface properties have an effect on the adsorption of volatile organic compounds (VOCs).