If radioactive plumes are released outside due to loss of containment building integrity during a nuclear power plant accident, these materials might travel with the wind, affecting both the surrounding environment and neighboring countries. In China, most nuclear power plants are located on the eastern coast. Consequently, a radioactive plume generated during an accident could negatively impact even the western part of the Korean Peninsula due to westerly winds. To detect such problems early, respond quickly, and protect residents, a system that can monitor aerial radiation under normal conditions is needed. Additionally, a detection system that can operate in real-time in an emergencies conditions is required. The current method for aerial radiation measurement takes environmental radiation data from a monitoring post 1.5 m above the ground and converts it to altitude. To measure actual aerial radiation, an expansive area is surveyed by aircraft. However, this approach is both time-consuming and expensive. Thus, to monitor radioactive plumes influenced by environmental factors like wind, we need a radiation detector that can gauge both radioactivity and directionality. In this study, we developed a radiation detector capable of assessing both the radioactivity and directionality of a radioactive plume and conducted its performance evaluation. We miniaturized the radiation detector using a CZT (Cadmium Zinc Telluride) sensor, enabling its mounting on unmanned aerial vehicles like drones. It is configured with multi-channels to measure directionality of a radioactive plumes. For performance evaluation, we positioned two-channel CZT sensors at 90 degrees and measured the energy spectrum for angle and distance using a disk-type radioactive isotope. Using this method, we compared and analyzed the directionality performance of the multi-channel radiation detector. We also confirmed its capability to discern specific radioactivity information and nuclide types in actual radioactive plumes. Our future research direction involves mounting the multi-channel radiation detector on a drone. We aim to gather actual aerial radiation data from sensors positioned in various directions.

The domestic Pressurized Heavy Water Reactor (PWHR) nuclear power plant, Wolsong Unit 1, was permanently shut down on December 24, 2019. However, research on decommissioning has mainly focused on Pressurized Water Reactors (PWRs), with a notable absence of both domestic and international experience in the decommissioning of PHWRs. If proper business management such as radiation safety and waste is not performed, it can lead to increased business risks and costs in decommissioning. Therefore, the assessment of waste volume and cost, which provide fundamental data for the nuclear decommissioning process, is a crucial technical requirement before initiating the actual decommissioning of Wolsong Unit 1. Decommissioning radiation-contaminated structures and facilities presents significant challenges due to high radiation levels, making it difficult for workers to access these areas. Therefore, technology development should precede decommissioning process assessments and safety evaluations, facilitating the derivation of optimal decommissioning procedures and ensuring worker safety while enhancing the efficiency of decommissioning operations. In this study, we have developed a program to estimate decommissioning waste amounts for PHWRs, building upon prior research on PWR decommissioning projects while accounting for the specific design characteristics of PHWRs. To evaluate the amount of radioactive waste generated during decommissioning, we considered the characteristics of radioactive waste, disposal methods, packaging container specifications, and the criteria for the transfer of radioactive waste to disposal operators. Based on the derived algorithm, we conducted a detailed design and implemented the program. The proposed program is based on 3D modeling of the decommissioning components and the calculation of the Work Difficulty Factor (WDF), which is used to determine the time weighting factors for each task. Program users can select the cutting and packaging conditions for decommissioning components, estimate waste amount based on the chosen decommissioning method, and calculate costs using time weighting factors. It can be applied not only to PHWRs, but also to PWRs and non-nuclear fields, providing a flexible tool for optimizing decommissioning process.

부추속은 수선화과에 속하며 약 1000여종에 이른다. 좀부 추는 자생 부추속에 속하며 식용이 가능하고 크기가 작아 분 화식물로 적합하다. 이에 따라 본 연구는 좀부추를 분화 소재 로서 개발하기 위하여 식물의 측지성장을 촉진하고 꽃의 품질 을 향상시키기 위해 수행되었다. 이를 위하여 좀부추의 구근 을 생장조절제(GA3, BA, 에테폰, TDZ)에 다른 시간(1, 5시 간)동안 침지처리했을 때 식물의 생장과 꽃에 어떤 영향을 주 는지 조사하였다. GA3 처리구는 엽수와 자구의 수가 증가해 증식을 촉진시키는 효과가 있었다. 게다가 GA3는 화수의 증 가와 조기개화를 유도했다. 그러나 엽폭과 화경의 폭은 감소 하였다. 에테폰은 좀부추의 초장과 초폭에서 영향을 주지 않 았으나 1h에서 자구의 수가 증가하였다. 에테폰은 화서 발생 을 억제하여 화경의 수가 감소하였다. BA는 식물의 생장과 개 화 특성에 유의적인 영향을 보이지 않았다. TDZ처리한 식물 은 왜화되고 생육상태가 불량하였으며, 식물을 고사시켰다.

Prevention of radiation hazards to workers and the environment in the event of decommissioning nuclear power plants is a top priority. To this end, it is essential to continuously perform radiation characterization before and during decommissioning. In operating nuclear power plants, various detectors are used depending on the purpose of measurement. Portable detectors used in power plants have excellent portability, but there is a limit to the use of a single measuring device alone to quantify radioactive contamination, nuclide analysis, and ensure representation of measurement results. In foreign countries, gamma-ray visualization detectors are being actively used for operating and decommissioning nuclear power plants. KHNP is also conducting research on the development of gamma-ray visualization detectors for multipurpose field measurement at decommissioning nuclear power plants. It aims to develop detectors capable of visualizing radioactive contamination, analyzing nuclides, estimating radioactivity, and estimating dose rates. To this end, we are developing related software according to the development process by purchasing sensors from H3D, which account for more than 75% of the US gamma-ray visualization detector market. In addition, field tests are planned in the order of Wolsong Unit 1 and Kori Unit 1 with Research reactor in Gongneung-dong in accordance with the progress of development. The detector will be optimized by analyzing the test results according to various gamma radiation field environments. The development detector will be used for various measurement purposes for Kori unit 1 and Wolsong

본 연구는 관상가치가 있는 자생 참두메부추와 갯부추를 절화소재로 이용하고자 수행되었다. 실험은 절화가 수확된 직후, gibberellic acid(GA3) 50, 75, 100mg·L-1, silver thiosulfate(STS) 0.1, 0.3, 0.5mM, 8-hydroxyquinoline sulfate(8-HQS) 25, 50, 100mg·L-1, 그리고 시중에 판매되 고 있는 Chrysal 8mL·L-1, Floralife 10mL·L-1의 보존용액 에 처리되었다. 참두메부추의 절화수명 연장에는 Chrysal 보 존용액 처리가 가장 효과적이었으며 다음으로 75mg·L-1 GA3 처리가 효과적이었다. 한편 8-HQS와 STS는 참두메부추의 절화수명을 단축하고 줄기가 갈변하는 등의 부정적인 영향을 끼쳤다. Chrysal과 더불어 Floralife 보존용액 처리는 절화 참두메부추의 상대 생체중변화율을 높이는데 효과가 있었다. 반면 갯부추는 100mg·L-1 GA3 처리에서 절화수명이 유일하 게 7일까지 연장되었다. GA3 보존용액 처리를 제외한 다른 처리에서 갯부추의 절화수명은 증류수인 대조구보다 비슷하 거나 약간 높은 수준이었다. 절화 갯부추의 수분흡수율은 실 험 초반 100mg·L-1 8-HQS 처리에서, 상대 생체중변화율은 Chrysal 보존용액 처리에서 가장 높게 조사되었으나 두 처 리 모두 절화수명이 유의하게 연장되지 않았다. 갯부추는 100mg·L-1 GA3 처리에서 절화수명을 비롯한 절화품질이 가 장 우수하였다.

With the aging of nuclear power plants (NPPs) in 37 countries around the world, 207 out of 437 NPPs have been permanently shutdown as of August 2022 according to the IAEA. In Korea, the decommissioning of NPPs is emerging as a challenge due to the permanent shutdown of Kori Unit 1 and Wolsong Unit 1. However, there are no cases of decommissioning activities for Heavy Water Reactor (HWR) such as Wolsong Unit 1 although most of the decommissioning technologies for Light Water Reactor (LWR) such as Kori Unit 1 have been developed and there are cases of overseas decommissioning activities. This study shows the development of a decommissioning waste amount/cost/process linkage program for decommissioning Pressurized Heavy Water Reactor (PHWR), i.e. CANDU NPPs. The proposed program is an integrated management program that can derive optimal processes from an economic and safety perspective when decommissioning PHWR based on 3D modeling of the structures and digital mock-up system that links the characteristic data of PHWR, equipment and construction methods. This program can be used to simulate the nuclear decommissioning activities in a virtual space in three dimensions, and to evaluate the decommissioning operation characteristics, waste amount, cost, and exposure dose to worker. In order to verify the results, our methods for calculating optimal decommissioning quantity, which are closely related to radiological impact on workers and cost reduction during decommissioning, were compared with the methods of the foreign specialized institution (NAGRA). The optimal decommissioning quantity can be calculated by classifying the radioactivity level through MCNP modeling of waste, investigating domestic disposal containers, and selecting cutting sizes, so that costs can be reduced according to the final disposal waste reduction. As the target waste to be decommissioning for comparative study with NAGRA, the calandria in PHWR was modeled using MCNP. For packaging waste container, NAGRA selected three (P2A, P3, MOSAIK), and we selected two (P2A, P3) and compared them. It is intended to develop an integrated management program to derive the optimal process for decommissioning PHWR by linking the optimal decommissioning quantity calculation methodology with the detailed studies on exposure dose to worker, decommissioning order, difficulty of work, and cost evaluation. As a result, it is considered that it can be used not only for PHWR but also for other types of NPPs decommissioning in the future to derive optimal results such as worker safety and cost reduction.

The fuel fabrication facility has been built and is being operated by KAERI since licensing research reactor fuel fabrication in 2004. After almost 20 years of operation, outdated equipment for fabrication or inspection has been replaced by automated, digitalized ones to assure a higher quality of nuclear fuels. However, the generation of a large amount of radioactive waste is another concern for the replacement in terms of its volume and various types of it that should be categorized before disposal. The regulatory body, NSSC (Nuclear Safety and Security Commission) released a notice related to the classification of radioactive wastes, and most accessory equipment can be classified into the clearance levels, called self-disposal waste. In this study, the practice of self-disposal of metal radioactive waste is carried out to reduce its volume and downgrade its radioactivity. For metal radioactive waste, which is expected to occupy the most amount, analysis status and legal limitations were performed as follows: First, the disposal plan was established after an investigation of the use history for equipment. Second, those were classified by types of materials, and their surface radio-contamination was measured for checking self-disposable or not. After collecting data, the plan for the self-disposal was written and submitted to the Korea Institute of Nuclear Safety (KINS) for approval.

본 연구에서는 수확 후 저장 기간에 따른 절화 장미의 수명 변화를 알아보았다. 절화장미 ‘Antique Curl’을 수확 직후 4℃ 암조건의 저장고에서 0일(무처리), 1일, 3일, 5일, 7일간 보존 용액 처리 후 습식 저장하였다. 저장이 끝난 절화는 24℃ 실 내 광환경으로 옮겨 절화 보존제 유무 조건에서 절화수명을 조사하였다. 그 결과, 절화수명은 저장기간 3일차까지는 20일 전후로 높았으나, 5일차 이후 유의적으로 감소했다. 절화 보 존제는 절화수명 연장에 효과적이지는 않았으나 절화의 꽃목 굽음 현상을 완화시켰다. 엽록소 형광(Fv/Fm)은 저장 기간과 관계없이 0.78~0.82 수준으로 나타났으며 저장기간에 의한 광 생리 기능저하는 확인되지 않았다. 결과적으로 절화장미 ‘Antique Curl’의 상업적 저장 기한은 최대 5일로 확인되었다.

This study deals with replacement analysis of deteriorated equipment for improving productivity of production system. Frequent breakdown of the deteriorated equipment causes a situation that reduces productivity such as low product quality, process delay, and repair cost. However, the replacement of new equipment will be required a high initial investment cost, so it is important to analysis the economic feasibility. Therefore, we analyze the effect of the production system due to the aging effect of the equipment and the feasibility of equipment replacement based on the economic analysis. The process flow, working time, logistics movement, etc. are analyzed in order to build the simulation modeling for a ship and land switchboard production system. Using numerical examples, the economic feasibility analysis of equipment replacement through replacement of existing deteriorated equipment and additional arrangement of new facilities is performed.

Functional dyspepsia (FD) is a gastrointestinal disorder with diverse symptoms but no structural or organic manifestations. Benachio-F® (herein named ‘BF-1’) is an over-the-counter liquid digestive formulated with multiple herbal extracts, which has been reported to improve symptoms of FD. A total two experiments were conducted. First, we examined whether BF-1 can modulate the progression of FD through two experimental rat models. A total of three doses (0.3x, 1x, 3x of the human equivalent dose) were used. In the gastric emptying model, both 1x (standard) or 3x (3-fold-concentrated) BF-1 enhanced gastric emptying was compared with that of vehicle-treated animals. In a feeding inhibition model induced by acute restraint stress, treatment with 1x or 3x BF-1 led to a similar degree of restoration in food intake that was comparable to that of acotiamide-treated animals. Among the constituents of BF, fennel is known for its choleretic effect. Thus, we next investigated whether a novel BF-based formula (named ‘BF-2’) that contains an increased amount of fennel extract (3.5-fold over BF-1), has greater potency in increasing bile flow. BF-2 showed a superior choleretic effect compared to BF-1. Furthermore, the postprandial concentration of serum secretin was higher in animals pretreated with BF-2 than in those pretreated with BF-1, suggesting that the increased choleretic effect of BF-2 is related to secretin production. Our results demonstrate that BF-1 can modulate the pathophysiological mechanisms of FD by exerting prokinetic and stress-relieving effects, and that BF-2 has a better choleretic effect than BF-1.

Mesenchymal stem cells (MSCs) have been recognized as a therapeutic tool for various diseases due to its unique ability for tissue regeneration and immune regulation. However, poor survival during in vitro expansion and after being administrated in vivo limits its clinical uses. Accordingly, protocols for enhancing cell survivability is critical for establishing an efficient cell therapy is needed. CDDOMe is a synthetic C-28 methyl ester of 2-cyano-3,12-dioxoolean-1,9-dien-28-oic acid, which is known to stimulate nuclear factor erythroid 2-related factor 2 (Nrf2)- antioxidant response element (ARE) pathway. Herein, report that CDDO-Me promoted the proliferation of MSCs and increased colony forming units (CFU) numbers. No alteration in differentiation into tri-lineage mesodermal cells was found after CDDO-Me treatment. We observed that CDDO-Me treatment reduced the cell death induced by oxidative stress, demonstrated by the augment in the expression of Nrf2-downstream genes. Lastly, CDDO-Me led to the nuclear translocation of NRF2. Our data indicate that CDDO-Me can enhance the functionality of MSCs by stimulating cell survival and increasing viability under oxidative stress.

부추속 식물은 수선화과의 다년생 초본으로 약 1000여종에 이른다. 한국에서는 24종의 자생종이 분포하며 유전자원으로서 큰 가치를 지닌 분류군이다. 그러나 자생부추속 식물에 대한 연구는 일부 종에 대하여 한정적으로 이루어지고 있으며, 갯부추, 두메부추, 울릉산마늘과 같이 최근 분류되거나 잘 알려지지 않은 종에 대한 연구는 매우 부족하였다. 따라서 본 연구는 자생부추속 4종(강부추, 한라부추, 갯부추, 산부추)에 대한 온도 및 명암처리에 대한 발아특성을 조사하였다. 발아 특성은 발아율, T50, 평균발아일수, 발아균일도, 발아속도로 평 가하였다. 강부추와 갯부추는 5℃에서 50%이상의 발아율을 보였으나 한라부추와 산부추는 전혀 발아하지 않았다. 갯부추 는 남부지방 해변가, 강부추는 강이나 하천주변에 서식하며 한라부추와 산부추는 주로 산지에 서식하는 것으로 알려져있다. 따라서 이러한 차이는 종별 생육지의 환경조건에 따른 차 이로 추정된다. 5℃에서 강부추의 발아율은 명조건(70.0%)보다 암조건(93.3%)에서 향상되었으며, T50과 평균발아일수도 단축되었다. 한라부추는 15℃에서 암조건이 명조건보다 발아율이 증가하고 15℃와 20℃에서는 T50과 평균발아일수가 단축 되었다. 그에 따라 발아속도도 증가하였으며 발아균일도도 상 승하였다. 갯부추는 5℃에서 발아율은 명조건(70.0%)보다 암 조건(83.3%)에서 상승했고, 15℃에서 T50과 평균발아일수가 단축되었으며 발아속도가 증가하였다. 산부추는 15℃와 20℃ 에서 T50과 평균발아일수가 단축되었으며 발아속도가 증가하 였다. 따라서 상대적으로 낮은 온도 처리구에서 명조건보다 암조건이 일부 발아특성을 향상시켰다. 실험에 사용된 4종의 종자는 대부분 15~25℃에서 90%가 넘는 발아율을 보였으나, 다른 발아특성은 온도와 광에 따른 차이를 보였다. 강부추와 산부추의 T50, 평균발아일수, 발아속도는 20℃와 25℃에서 가 장 향상되었고, 한라부추와 갯부추는 25℃에서 T50과 평균발 아일수가 가장 단축되었으며, 발아속도도 가장 빨랐다. 결론적으로 발아특성을 종합적으로 고려했을 때, 강부추는 광과 관계없이 20~25℃, 한라부추는 광과 관계없이 25℃, 갯부추는 암조건 25℃, 산부추는 명조건 25℃와 암조건 20~25℃를 발아 에 적합한 조건으로 제시하였다.

본 연구는 다양한 보존용액이 절화 수명에 미치는 영향과, 절단된 두메부추(Allium dumebuchum H.J.Choi)의 줄기의 수분흡수율 및 상대 생체중을 평가하여 두메부추를 절화로 개발 하기 위해 수행되었다. 두메부추 절화가 수확된 후, gibberellic acid(GA3) 50, 75, 100mg･L-1, 8-hydroxyquinoline sulfate(8-HQS) 25, 50, 100mg･L-1, silver thiosulfate(STS) 0.1, 0.3, 0.5mM, 그리고 Chrysal 8mL･L-1, Floralife 10mL･L-1의 보존용액에 처리되었다. 실험기간 동안 환경조건으로 온도는 24℃로 유지되었으며 상대 습도 43±2.1%, 평균 광도는 22.81±1.2μmol･m- 2･s-1, 일장은 9/15h이었다. 두메부추의 절화수명은 대조구인 절화에서 9.0일로 조사된 것에 비해 GA3 100mg･L-1 보존용액 처리된 절화에서 14.0일로 가장 높게 측정되었다. 수분흡 수율 또한 GA3 100mg･L-1 처리에서 실험이 종료되는 시점에 0.07mL･g-1･d-1로 조사되어 다른 처리보다 높았다. 상대 생체 중은 시판중인 절화수명 연장제 Floralife와 Chrysal 보존용액 처리가 GA3 처리보다 유의하게 높게 조사되었다. GA3를 절화 보존용액으로 사용한 결과, 두메부추는 다른 처리들에 비해 높은 수분흡수율로 절화수명이 대조구보다 평균 5일이상 연장 되었다. 그러나, 8-HQS와 STS 보존용액 처리는 대조구에 비하여 두메부추 절화수명에 큰 차이가 없었다.