The present study describes Philodromus rufus Walckenaer, 1826 with detailed descriptions, taxonomic photographs, distribution map, and proposition of a new synonym. Due to morphological similarity between P. pseudoexilis Paik, 1979 and P. rufus, taxonomic identity of P. pseudoexilis has been doubtful to date. A detailed bibliographic study of types of P. pseudoexilis between P. rufus and examination of specimens from the type locality of P. pseudoexilis with specimens of P. rufus collected across the country showed that P. rufus has all diagnostic characters found in types of P. pseudoexilis. Therefore, P. pseudoexilis Paik, 1979 should be regarded as a new synonym of Philodromus rufus Walckenaer, 1826.

A poorly known spider, Pholcus kwangkyosanensis Kim & Park, 2009 is redescribed with diagnosis, detailed descriptions, and taxonomic photographs of diagnostic characters. P. kwangkyosanensis is similar in appearance to P. kwanaksanensis Namkung & Kim, 1990, in terms of the shape of the genital organ and body, but it can be easily distinguished from the latter by the shape of the cheliceral apophysis, uncus, and procursus in males, as well as the shape of the epigynum and pore plates in females. The specimens of this spider were collected at the type locality (Mt. Gwanggyosan, Suwon), specifically under the bridge on a local stream in an agricultural landscape surrounded by rice fields, upland fields, or horticultural greenhouses.

Zooplankton biomass is essential for understanding the quantitative structure of lake food webs and for the functional assessment of biotic interactions. In this study, we aimed to propose a biomass (dry weight) estimation method using the body length of cyclopoid copepods. These copepods play an important role as omnivores in lake zooplankton communities and contribute significantly to biomass. We validated several previously proposed estimation equations against direct measurements and compared the suitability of prosomal length versus total length of copepods to suggest a more appropriate estimation equation. After comparing the regression analysis results of various candidate equations with the actual values measured on a microbalance-using the coefficient of variation, mean absolute error, and coefficient of determination-it was determined that the Total Length-DW exponential regression equation [W=0.7775×e2.0183L; W (μg), L (mm)] could be used to calculate biomass with higher accuracy. However, considering practical issues such as the morphological similarity between species and genera of copepods and the limitations of classifying copepodid stages, we derived a general regression equation for the pooled copepod community rather than a species-specific regression equation.

넷플릭스의 앤솔로지 애니메이션 시리즈인 <러브, 데스 + 로봇>(Love, Death + Robot) 시즌 3의 에피소드 중 하나이자 알베르토 미엘고 감독이 연출한 단편 애니메이션 <히바로>(Jibaro) 는 공개 당시 작품의 굉장한 몰입감과 사실감으로 화제가 되었다. 그렇지만 <히바로>가 포토 리얼리스틱(Photo-realistic)한 이미지 구현을 목표로 한 작품이라고 보기는 어렵다. 감독의 개성이 애니메이션 매체의 자유로운 표현력을 통해 작품 곳곳에서 드러나기 때문이다. 본 연 구는 <히바로>가 놀라운 사실감을 보여주면서도 초현실적, 환상적 이미지 역시 동시에 담아내 는 독특한 성취를 이룬 작품이며 이를 이루고 있는 구성 요소들을 분석해 볼 필요성이 있다는 판단 아래 진행되었다. 또한, <히바로>에 대한 연구가 국내에서 거의 이뤄지지 않은 상황이기 때문에 본 논문이 더욱 가치를 가질 것으로 기대한다. 본 연구에서는 우선 볼터와 그루신의 재매개 이론에 대해 살펴본 후, 재매개 이론에서 설명하고 있는 재매개의 형태와 방향에 관해 서술하였다. 이후에는 <히바로>의 구성 요소들을 재매개 이론을 바탕으로 분석하며 <히바로> 가 사실성과 환상성을 결합한 방식을 분석해 보았다.

Spiders play an important role in regulating insect pests in the agricultural ecosystem. The community structure and biodiversity of rice field spiders were surveyed in 5 areas (Anseong, Nonsan, Imsil, Namwon, and Gurye) from 20 May to 30 September, 2021. A total of 5,525 spiders collected were identified as 64 species of 17 families. Species richness and abundance were high in Lycosidae, Tetragnathidae and Linyphiidae. The similarity of rice field spider communities among regions was about 72% and was divided into three groups: the middle inland area, the southern mountainous area, and the southern inland area. Species diversity averaged as 2.55±0.06. On the seasonaliy of The boidiversity tended to increase toward the latter half of cultivation.

This study investigated speaking anxiety among advanced Korean language learners in Korean Language Institution classrooms, and the strategies they used to overcome it. The study employed qualitative methodology using online interviews for data collection. The sampling technique involved purposive sampling by selecting 13 Korean learners who had completed an advanced Korean course at TOPIK Levels 5 or 6, with Level 6 being the highest. The interview questions addressed various aspects, including comparisons of speaking skills, anxiety in Korean classrooms, fear of making mistakes, concerns about classmates’ reactions, and anxiety induced by teachers. Thematic analysis was performed by generating initial codes, grouping related codes to uncover potential themes, and highlighting recurring patterns in the participants’ responses. The results revealed three factors that contribute to speaking anxiety: personal reasons, teachers’ classroom approaches, and teaching methods. Advanced learners manage anxiety through three coping strategies: preparation, positive thinking, and seeking support from peers. The study concludes with discussions on the pedagogical implications, limitations, and recommendations for future research in advanced Korean language learning classrooms.

The present study describes Philodromus paiki sp. nov., which was previously misidentified as P. fuscomarginatus (De Geer, 1778), P. poecilus (Thorell, 1872), and P. spinitarsis Simon, 1895 in Korea, as a new species with diagnosis, detailed descriptions, and taxonomic photographs. Additionally, P. spinitarsis is also described to correct previous misidentifications of Korean records of the species.

KHNP is conducting research to decommission Wolsong Unit 1 Calandria. Establishment of preparation and dismantlement processes, conceptual design of equipment and temporary radiation protection facilities, and waste management are being established. In particular, the ALARA plan is to be established by performing exposure dose evaluation for workers. This study aims to deal with the methodology of evaluating exposure dose based on the calandria dismantling process. The preparation process consists of bringing in and installing tooling and devices, and removing interference facilities to secure work space. The main source term for the preparation process is the calandria structure itself and crud of feeders. In the case of the dismantlement process, a structure with a shape that changes according to the process was modeled as a radiation source. It is intended to estimate the exposure dose by selecting the number of workers, time, and location required for each process in the radiation field evaluated according to the preparation and dismantlement process. In addition, it is also conducting an evaluation of the impact on dust generated by cutting operations and the human impact of C-14, H-3, which are specialized nuclides for heavy water reactors. KHNP is conducting an exposure dose evaluation based on a process based on the preparation and dismantlement process for decommissioning Calandria through computation code analysis. If additional worker protection measures are deemed necessary through dose evaluation according to this methodology, the process is improved to prepare for the dismantling of worker safety priorities.

The radiological characterization of SSCs (Structure, Systems and Components) plays one of the most important role for the decommissioning of KORI Unit-1 during the preparation periods. Generally, a regulatory body and laws relating to the decommissioning focus on the separation and appropriate disposal or storage of radiological waste including ILW (intermediate level waste), LLW (low level waste), VLLW (very low level waste) and CW (clearance waste), aligned with their contamination characteristics. The result of the preliminary radiological characterization of KORI Unit-1 indicated that, apart from neutron activated the RV (reactor vessel), RVI (reactor vessel internals), and BS (biological shielding concrete), the majorities of contamination were sorted to be less than LLW. Radiological contamination can be evaluated into two methods. Due to the difficulties of directly measuring contamination on the interior surfaces of the pipe, called CRUD, the assessment was implemented by modeling method, that is measuring contamination on the exterior surfaces of the pipes and calculating relative factors such as thickness and size. This indirect method may be affected by the surrounding radiation distribution, and only a few gamma nuclides can be measured. Therefore, it has limitation in terms of providing detailed nuclide information. Especially, α and β nuclides can only be estimated roughly by scaling factors, comparing their relative ratios with the existing gamma results. To overcome the limitation of indirect measurement, a destructive sampling method has been employed to assess the contamination of the systems and component. Samples are physically taken some parts of the systems or components and subsequently analyzed in the laboratory to evaluate detailed nuclides and total contamination. For the characterization of KORI Unit-1, we conducted the radiation measurement on the exterior surfaces of components using portable instruments (Eberline E-600 SPA3, Thermo G20-10, Thermo G10, Thermo FH40TG) at BR (boron recycle system) and SP (containment spray system) in primary system. Based on these results, the ProUCL program was employed to determine the destructive sample collection quantities based on statistical approach. The total of 5 and 8 destructive sample quantities were decided by program and successfully collected from the BR and SP systems, respectively. Samples were moved to laboratory and analyzed for the detail nuclide characteristics. The outcomes of this study are expected to serve as valuable information for estimating the types and quantities of radiological waste generated by decommissioning of KORI Unit-1.

Raman characteristics of various minerals constituting natural rocks collected from uranium deposits in Okcheon metamorphic zone in Korea are presented. Micro-Raman spectra were measured using a confocal Raman microscope (Renishaw in Via Basis). The focal length of the spectrometer was 250 mm, and a 1800 lines/mm grating was installed. The outlet of the spectrometer was equipped with a CCD (1,024256 pixel) operating at -70°C. Three objective lenses were installed, and each magnification was 10, 50, and 100 times. The diameter of the laser beam passing through the objective lens and incident on the sample surface was approximately 2 m. The laser beam power at 532 nm was 1.6 mW on the sample surface. Raman signal scattered backward from the sample surface was transmitted to the spectrometer through the same objective lens. To accurately determine the Raman peak position of the sample, a Raman peak at 520.5 cm-1 measured on a silicon wafer was used as a reference position. Since quartz, calcite, and muscovite minerals are widely distributed throughout the rock, it is easy to observe with an optical microscope, so there is no difficulty in measuring the Raman spectrum. However, it is difficult to identify the uraninite scattered in micrometer sizes only with a Raman microscope. In this case, the location of uraninite was first confirmed using SEM-EDS, and then the sample was transferred to the Raman microscope to measure the Raman spectrum. In particular, a qualitative analysis of the oxidation and lattice conditions of natural uraninite was attempted by comparing the Raman properties of a micrometer-sized natural uraninite and a laboratory-synthesized UO2 pellet. Significantly different T2g/2LO Raman intensity ratio was observed in the two samples, which indicates that there are defects in the lattice structure of natural uraninite. In addition, no uranyl mineral phases were observed due to the deterioration of natural uraninite. This result suggests that the uranium deposit is maintained in a reduced state. Rutile is also scattered in micrometer-sizes, similar to uraninite. The Raman spectrum of rutile is similar in shape to that of uraninite, making them confused. The Raman spectral differences between these two minerals were compared in detail.

The thermocatalytic decomposition of methane is a promising method for hydrogen production. To determine the cause of carbonaceous catalyst deactivation and to produce high-value carbon, methane decomposition behavior and deactivated catalysts were analyzed. The surface properties and crystallinity of a commercial activated carbon material, MSP20, used as a methane decomposition catalyst, varied with the reaction time at a reaction temperature of 900 °C. During the initial reaction, MSP20 provided a methane conversion of ≥ 50%; however, the catalyst exhibited rapid deactivation as crystalline carbon grew at surface defects; after 15 min of reaction, approximately 33% methane conversion was maintained. With increasing reaction time, the specific surface area of the catalyst decreased, whereas crystallinity increased. The R-square value of the conversion–crystallinity relationship was significantly higher than that of the conversion–specific surface area relationship; however, neither profile was linear. The activity of the activated carbon catalyst for methane decomposition is mainly determined by the complex actions of the specific surface area and defect sites. The activity was maintained after an initial sharp decline caused by the continuous growth of crystalline carbon product. This study presents the application of carbonaceous catalysts for the decomposition reaction of methane to form COx- free hydrogen, while simultaneously yielding porous carbon materials with an improved electrical conductivity.

Entomopathogenic fungi are used to produce raw materials by applying solid culture technology using grains. But there are various problems such as low production efficiency and cross-contamination. Solvum Co., Ltd. conducted research on liquid culture technology to develop a method that can overcome these shortcomings of solid culture technology. We conducted research and development on using Beauveria bassiana 331R to observe the culture according to the seed inoculation amount in a 30 L fermenter, it was carried out at 1.0 % (v/v) and 10.0 % (v/v). Although there was a difference of 1 day, 1.0 %(v/v) seed inoculation was observed to be more than twice that, and active blastospores and yield were observed at over 95.0 %. As a results, it was determined that cost and efficient production would be possible during the culture process in mass production. Based on these experiments, a 300 L fermenter was cultured with 1.0 % (v/v) seed inoculation, resulting in a yield of 1.24E+09 CFU/mL on the 6th day of cultivation. As a result of freeze-drying using the final culture medium, it was confirmed that the production yield was improved by 113.0 % compared to the control.

Although the proportion of coal-fired power generation is decreasing, efficient operating technology is needed to continuously invest in facilities and reduce maintenance costs until it is abolished. Boilers, one of the main facilities of power plants, operate for a long time in harsh environments of high temperature and high pressure. In addition, damage due to deterioration is likely to occur depending on the fuel and tube material used. It is very important to judge soundness because damage caused by deterioration adversely affects facility operation. Previously, replication method was used to analyze the progress of deterioration. In the replication method, pre-treatment such as chemical treatment is performed on the boiler tube in the field, the area is reproduced by attaching a film, and the replicated film is determined by an expert in the laboratory with an expensive microscope. However, this method involves substantial costs and time requirements, as well as the possibility of human errors. To address these issues, we developed a mobile health assessment system in this research. Since it is detachable and takes images in real time, this system enables swift evaluations across a broad range and facilitates the assessment of preprocessing quality. In addition, it was intended to reduce existing human mistakes by developing a degradation classification algorithm using the merger cluster method.

Previous research on green product innovation (GPI) has primarily focused on the performance of new product development, neglecting the critical, early fuzzy front-end (FFE) phase. Drawing upon the firm's resource-based view (RBV) and dynamic capabilities perspective, this study explores how co-production affects FFE outcomes (creative idea and product definition proficiency) of GPI and whether joint learning ambidexterity is a mediating mechanism in international buyer-supplier relationships. Additionally, we provide a contingency perspective by considering the moderating role of the innovation ecosystem on the relationship between co-production and joint learning ambidexterity. Finally, this study contributes to a theoretical understanding, analyzing co-production as a predictor, joint learning ambidexterity as a mediator, and innovation ecosystem as a moderator.

This study supplements the literature by determining how restaurant innovativeness is linked to customer advocacy as well as considering self-image congruity as mediator of this relationship. A questionnaire survey of 385 restaurant customers was conducted in Taiwan. The results indicated that restaurant innovativeness is positively related to customers’ self-image congruity and customer advocacy. Customers’ self-image congruity is positively associated with customer advocacy. In addition, self-image congruity mediates the relationship between restaurant innovativeness and customer advocacy. The research contributes to literature by extend the relationships between restaurant innovativeness, self-image congruity, and customer advocacy. Restaurant managers should adopt approaches (e.g. innovativeness-related activities) for enhancing self-image congruity in customers.