Probiotic lactic acid bacteria are live microorganisms that provide health benefits when administered in adequate amounts and may exhibit antiproliferative effects on various cancer cell lines, including colon cancer. This study investigates the cytotoxic effects of three Lactobacillus strains - Limosilactobacillus (L.) reuteri VA 102, Ligilactobacillus (L.) animalis VA 105, and Limosilactobacillus (L.) reuteri KCTC 3594 (ATCC 23272) - on mouse colon carcinoma cells (CT-26). Live cells, heat-killed cells, and cell-free supernatant (CFS) of Lactobacillus sp. were prepared and used to treat CT-26 cells at different concentrations. The cytotoxic effect was assessed using the MTT assay. The results indicated that the CFS of all strains significantly reduced the viability of CT-26 cells in a dose-dependent manner, with the VA 102 strain showing the most pronounced effect. Heat-killed cells of L. reuteri VA 102 and L. reuteri KCTC 3594 (ATCC 23272) also reduced cell viability. These findings suggest the potential anticancer properties of these Lactobacillus strains and indicate that CFS and heat-killed cells may offer a safer and more effective alternative to live bacteria for therapeutic applications. Our study contributes to the understanding of the potential of Lactobacillus strains, particularly L. reuteri VA 102, L. reuteri KCTC 3594 (ATCC 23272), and L. animalis VA 105, as possible candidates for cancer treatment and control.

Although insects lack the adaptive immunity characteristic of vertebrates, certain species exhibit enhanced subsequent immune responses upon re-encountering a pathogen, a phenomenon known as immune priming. The underlying mechanism of this phenomenon is still elusive. This study evaluated the immune priming of the diamondback moth, Plutella xylostella, induced by a nonpathogenic and commensal bacterium, Bacillus subtilis. Prior exposure of P. xylostella to B. subtilis significantly increased survival against a pathogenic bacterium, Bacillus thuringiensis, compared to larvae without pre-exposure. To extend the effect of the microbial commensals, two antibiotics, ampicillin and kanamycin, were treated to suppress their populations. In the axenic-like condition in the gut, cellular and humoral immune responses were significantly suppressed. An addition of B. subtilis to the diet of P. xylostella significantly enhanced the immune responses. Apolipoprotein D, known as a lipid carrier, acts like a vertebrate lipocalin in the immune priming of the other insect, Spodoptera exigua. The ortholog of this gene has been identified in P. xylostella, and its expression was induced upon B. subtilis treatment. This study sheds light on the potential role of commensal gut microbes, including B. subtilis, in the immune priming of these insects.

본 연구를 통해 한국산 Thyas속을 검토하였다. 이 중, T. coronata (Fabricius, 1775)는 성충 및 생식기 도해사진을 기반으로 최초로 그 분류학 적 기재문을 작성하였다. 모든 한국산 Thyas속 종에 대한 분류학적 진단형질 및 분포 정보를 함께 제공하였다.

Synthesis of extremely competent materials is of great interest in addressing the energy storage concerns. Manganese oxide nanowires ( MnO2 NWs) are prepared in situ with multiwall carbon nanotubes (MWCNT) and graphene oxide (GO) using a simple and effective hydrothermal method. Powder XRD, Raman and XPS analysis are utilized to examine the structural characteristics and chemical state of composites. The initial specific discharge capacity of pure MnO2 NWs, MnO2 NWs/ MWCNT and MnO2 NWs/rGO composites are 1225, 1589 and 1685 mAh/g, respectively. The MnO2 NWs/MWCNT and MnO2 NWs/rGO composites showed stable behavior with a specific capacity of 957 and 1108 mAh/g, respectively, after 60 cycles. Moreover, MnO2 NWs/rGO composite sustained a specific capacity of 784 mAh/g, even after 250 cycles at a current density of 1 A/g showing outstanding cycling stability.

This study explores the profound impact of varying oxygen content on microstructural and mechanical properties in specimens HO and LO. The higher oxygen concentration in specimen HO is found to significantly influence alpha lath sizes, resulting in a size of 0.5-1 μm, contrasting with the 1-1.5 μm size observed in specimen LO. Pore fraction, governed by oxygen concentration, is high in specimen HO, registering a value of 0.11%, whereas specimen LO exhibits a lower pore fraction (0.02%). Varied pore types in each specimen further underscore the role of oxygen concentration in shaping microstructural morphology. Despite these microstructural variations, the average hardness remains consistent at ~370 HV. This study emphasizes the pivotal role of oxygen content in influencing microstructural features, contributing to a comprehensive understanding of the intricate interplay between elemental composition and material properties.

The primary therapeutic approach for Brucella species infections has mainly been based on antibiotic treatment. However, the development of vaccines for brucellosis control remains controversial. Furthermore, there is currently no licensed vaccine available for human brucellosis. This study aims to evaluate the effect of a combination of recombinant protein vaccines against Brucella (B.) abortus infection using a mouse model. Two B. abortus genes, namely dapB and gpm, were cloned and expressed in competent Escherichia (E.) coli DH5α using the pCold-TF vector. Successfully cloned vectors were subjected to PCR amplification using specific primer pairs. The apparent sizes of dapB and gpm were detected at 807 bp and 621 bp, respectively. Besides, the purified recombinant proteins dapB and gpm were detected using SDS-PAGE electrophoresis with correct sizes of 82.86 kDa and 87.61 kDa, respectively. These recombinant proteins were used to immunize mice as a combined subunit vaccine (CSV) to elicit host immunity against B. abortus infection. Mice immunized with CSV exhibited increased proliferation of CD4+ and/or CD8+ T cells at week 7th and 9th before sacrifice, in comparison to the control group. Notably, CSV immunization showed a significant decrease in bacterial burden in the spleen compared to the control group. Altogether, CSV using dapB and gpm induced host adaptive immune response against Brucella infection, suggesting its potential as an effective new subunit vaccine candidate.

Bis (2-ethylhexyl)phosphoric acid (HDEHP) is a renowned extractant, favored for its affinity to selectively remove uranium via its P=O groups. We previously synthesized HDEHP-functionalized mesoporous silica microspheres for solid-phase uranium adsorption. Herein, we investigated the kinetic and isothermal behavior of uranyl ion adsorption in mesoporous silica microspheres functionalized with phosphate groups. Adsorption experiments were conducted by equilibrating 20 mg of silica samples with 50 mL of uranium solutions, with concentrations ranging from 10 to 100 mgU L−1 for isotherms and 100 mgU L−1 for kinetics. Three distinct samples were prepared with varying HDEHP to TEOS molar ratios (x = 0.16 and 0.24) and underwent hydrothermal treatment at different temperatures, resulting in distinct textural properties. Contact times spanned from 1 to 120 hours. For x = 0.16 samples, it took around 50 and 11 hours to reach equilibrium for the hydrothermally treated samples at 343 K and 373 K, respectively. Adsorbed quantities were similar (99 and 101 mg g-1, respectively), indicating consistent functional group content. This suggests that the key factor influencing uranium adsorption kinetics is pore size of the silica. The sample treated at 373 K, with a larger pore size (22.7 nm) compared to 343 K (11.5 nm), experienced less steric hindrance, allowing uranium species to diffuse more easily through the mesopores. The data confirmed the excellent fit of pseudo-second-order kinetic model (R2 > 0.999) and closely matched the experimental value, suggesting that chemisorption governs the rate-controlling step. To gain further insights into uranium adsorption behavior, we conducted an adsorption isotherm analysis at various initial concentrations under a constant pH of 4. Both the Langmuir and Freundlich isotherm models were applied, with the Langmuir model providing a superior fit. The relatively high R2 value indicated its effectiveness in describing the adsorption process, suggesting homogenous sorbate adsorption on an energetically uniform adsorbent surface via a monolayer adsorption and constant adsorption site density, without any interaction between adsorbates on adjacent sites. Remarkably, differences in surface area did not significantly impact uranium removal efficiency. This observation strongly suggests that the adsorption capacity is primarily governed by the loading amount of HDEHP and the inner-sphere complexation with the phosphoryl group (O=P). Our silica composite exhibited an impressive adsorption capacity of 133 mg g-1, surpassing the results reported in the majority of other silica literature.

The development of food packaging materials with mechanical and antimicrobial properties is still a major challenge. N, P-doped carbons (NPCs) were synthesized. Poly(butylene adipate-co-terephthalate) (PBAT), which has an adverse effect on the environment and affects petroleum resources, has been commonly used for applications as food packaging. The development of PBAT composites reinforced with NPCs and studies on their structure and antimicrobial properties are presented in this study. The composite materials in the PBAT/NPCs were processed by solution casting. The plasticizing properties of NPCs enhanced the mechanical strength of composites produced of PBAT and NPCs. The thermal properties of PBAT composites were enhanced with addition of NPCs, according to thermogravimetric analysis (TGA). After reinforcement, PBAT/NPCs composites became more hydrophobic, according to contact angle measurements. In studies against S. aureus and E. coli food-borne pathogenic bacteria, the obtained composites show noticeably improved antimicrobial activity. The composite materials, according to the results of PBAT and NPCs may be a good choice for packing for food that prevents microorganisms.

The growth characteristics according to temperature conditions were investigated in the breeding room of the Sericulture & Entomology Experiment Station for Oriental garden crickets(Teleogryllus emma Ohmachi et Matsuura) and Modeagali-crickests(Loxoblemmus doenitzi Stein) collected from the lawns of Byeonsan-myeon, Buan-gun, Jeollabuk-do. The temperature conditions were 6 treatments from 15°C to 40°C at 5°C intervals using a multi-incubator, and the development period and mortality rate by age were compared using the 28°C breeding room conditions as a control. For T. emma, the higher the temperature, the shorter the total development period was, and the same trend was observed for the growth period by age stage. However, at low temperatures of 15°C and 20°C, all died after the third instar, and at high temperatures above 35°C, all died during development. At 25°C and 30°C, they developed normally, and the mortality rate was about 25%. The L. doenizi had the same tendency as the T. emma, with the higher the temperature, the shorter the development period. The total development period was 57.7 days at 25°C, which was similar to the T. emma's 55.9 days, and the mortality rate was the lowest at 44% at 25°C.

Immune priming is an increased immunity after prior exposure to a specific pathogen as a kind of adaptive immunity and occurs in insects. However, its underlying mechanism is elusive in insects. Immune priming was detected in a lepidopteran insect, Spodoptera exigua. Prior infection with a heat-killed pathogenic bacterium, Xenorhabdus hominickii, increased survival upon the second infection of the live bacteria compared to larvae without pre-exposure. Plasma collected from larvae with the prior infection significantly up-regulated cellular and humoral immune responses compared to the similar treatment without prior exposure. However, when the active plasma exhibiting immune priming was heat-treated, it lost the priming activity, suggesting a presence of protein factor(s) in the immune priming. Lipocalin is a lipid carrier protein and is well known in vertebrates for diverse physiological functions including immunity. An apolipoprotein D3 (ApoD3) is known to be a lipocalin functioning in immune priming in a mosquito, Anopheles gambiae. A homologous ApoD3 (Se-ApoD3) was identified in S. exigua. Se-ApoD3 was expressed in all developmental stages and larvae, it was highly expressed in hemocytes. RNA interference (RNAi) of Se-ApoD3 expression was performed by injecting its specific dsRNA. The larvae treated with the RNAi were impaired in cellular and humoral immune responses. Furthermore, the plasma collected from RNAi-treated larvae lost the immune priming even at the prior exposure. These suggest that Se-ApoD3 mediates the immune priming in S. exigua.

Extensive research and testing continue to be conducted for the development of vaccines targeting zoonotic diseases such as brucellosis. In this study, the potential of the DapB as a recombinant protein vaccine to effectively combat Brucella abortus 544 infection in BALB/c mice was evaluated. Western blotting assay results showed that recombinant protein DapB reacted with Brucella-positive serum, indicating its potential immunoreactivity. In vivo results showed that the peripheral blood CD4+ and CD8+ T cell population significantly increased in the DapB-immunized mice group after the first, second and third blood collection, compared to the control group that received PBS. Additionally, at the fourth blood collection, an increase in CD4+ T cell activation was observed in three vaccination groups compared to PBS negative control group. These results indicate the potential of DapB in stimulating cellular immunity. Fourteen days after infection, the bacterial load in the spleen was evaluated. The reduction in bacterial replication in the spleen by both DapB and RB51 highlights their protective efficacy against Brucella infection. These findings contribute to the ongoing efforts in developing effective vaccines against brucellosis and provide valuable insights for further research in this field.

Biomass-derived porous carbon is an excellent scientific and technologically interesting material for supercapacitor applications. In this study, we developed biomass-derived nitrogen-doped porous carbon nanosheets (BDPCNS) from cedar cone biomass using a simple KOH activation and pyrolysis method. The BDPCNS was effectively modified at different temperatures of 600 °C, 700 °C, and 800 ℃ under similar conditions. The as-prepared BDPCNS-700 electrode exhibited a high BET surface area of 2883 m2 g− 1 and a total pore volume of 1.26 cm3 g− 1. Additionally, BDPCNS-700 had the highest electrical conductivity (11.03 cm− 1) and highest N-doped content among the different electrode materials. The BDPCNS-700 electrode attained a specific capacitance of 290 F g− 1 at a current density of 1 A g− 1 in a 3 M KOH electrolyte and an excellent longterm electrochemical cycling stability of 93.4% over 1000 cycles. Moreover, the BDPCNS-700 electrode had an excellent energy density (40.27 Wh kg− 1) vs power density (208.19 W kg− 1). These findings indicate that BDPCNS with large surface areas are promising electrode materials for supercapacitors and energy storage systems.

Nuclear spent fuel (SNF) disposal in deep geological repositories is considered as one of sound options for the long-term and safe sequestration of radiotoxic SNF and the sustainable use of nuclear energy. The chemical behaviors of various radionuclides originated from SNF should be well understood to evaluate the migrational behaviors of radionuclides and their reactions and interactions with various geochemical components. Formation of secondary minerals, colloids, other insoluble precipitates is of interest since the concentrations of radionuclides in groundwaters can be limited by the solubility of those solid phases. Particularly when evaluating their solubility, the use of well-defined solid materials in terms of chemical composition and molecular structure is crucial to obtain reliable measurement results. In this study, a synthetic calcium uranyl silicate (Ca-U(VI)-silicate, or uranophane) was prepared and characterized by using various analytical methods including powder X-ray diffraction (pXRD), scanning electron microscopy/energy dispersive X-ray spectrometry (SEM/EDX), and vibrational (FTIR and Raman) spectroscopies. Uranyl silicate minerals are significant to the disposal of nuclear wastes. Our simulation demonstrates that uranophane (Ca[UO2SiO3OH]2·5H2O), one having a U:Si ratio of 1:1, can be a mineral species limiting U(VI) solubility under groundwater conditions in Korea. For the preparation of Ca-U(VI)-silicate, we applied a two-step hydrothermal synthetic procedure reported in literature with modification. Briefly, we conclude that the obtained mineral phase is the ‘α-uranophane’; our characterization results show that the structural and spectroscopic properties of the synthetic Ca-U(VI)-silicate agree well with those of α-uranophane. For instance, the pXRD patterns obtained from the solid show nearly identical diffraction peak positions with those from the reference XRD pattern. From IR and Raman spectroscopy it is noticed that the stretching modes of UO2 2+ and SiO4 4- ions result in strong absorption bands in a region of 700 ~ 1,100 cm-1. Elemental compositions of the synthetic solids were also estimated by using EDX analysis, which results in a Ca:U:Si ratio close to 1:2:2 on average. However, we found that it is difficult to obtain good crystallinity of uranophane, which can be observable by using SEM and its image analysis. We believe that this work serves as a model study to provide synthetic routes of radionuclide-related mineral phases and applicable solid phase characterization methods. In the presentation, the potential use of the U(VI)-silicate solid phase for the upcoming groundwater solubility measurements will be discussed. Keywords: Hexavalent Uranium, Silicate