Sorghum-Sudangrass hybrids (SSH) is a grass cereal hybrid crop with a high yield potential under different climatic conditions. The aim of this study was to evaluate the growth characteristics, dry matter yield and nutrient content of the SSH cultivars such as Dairy Mens Dream, Superdan and Supergreen from 2021 to 2023 in Jeju Island, Korea. Among the three cultivars, Superdan grew significantly taller with a larger stem diameter at both harvest times. In contrast, Dairy Mens Dream had least height and less stem diameter, but the dry matter yield was greater for Dairy Mens Dream than other cultivars. Furthermore, the crude protein content at the first cut was higher than 8.5% compared to the second cut (6.5 – 7.0%). The neutral detergent fiber (NDF) and acid detergent fiber (ADF) content was higher in the second harvest of all cultivars compared to the first harvest of SSH in 2021. The SSH cultivation in 2021 and 2023 had higher ADF and NDF content than in 2022, possibly due to the average precipitation and optimum temperature suitable for SSH production in 2021 and 2023. The selected three SSH cultivars showed significant growth characteristics, dry matter content, and nutritional value. The overall data suggested that all three SSH showed significant productivity and nutritional content in the Jeju region of sub-tropical climatic condition.

Spodoptera eridania and S. ornithogalli (Lepidoptera: Noctuidae), which are polyphagous pests that damage various crops such as tomatoes and beans are regulated quarantine species that are highly likely to invade South Korea. Therefore, it is crucial to promptly and accurately identify the presence of S. eridania and S. ornithogalli in crop fields to effectively eradicate as a regulated quarantine species. In this study, we developed a loop-mediated isothermal amplification (LAMP) assay, which allows for rapid in-field identification. To develop the LAMP　assay, we selected target species-specific genomic regions from the whole-genome sequences of one target and 13 other lepidopteran species. We validated each five and six primer sets that consistently produced positive reactions in S. eridania and S. ornithogalli, respectively. To test the sensitivity of the each locus, LAMP reactions were performed using various reaction times using crude DNA, which was extracted from various types of adult tissues. All sensitivity tests were also successful.

Since rice is the main food in Korea, there are no regulations on corn milling yet. Corn is known as one of the world's top three food crops along with wheat and rice, and it is known that 3.5 billion people worldwide use corn for food. In addition, corn mills are not developed or sold in Korea, but the use of corn mills is increasing significantly in many countries in Southeast Asia. In the Philippines, as Korea's rice mill import increases, Korea's KAMICO (Korea Agricultural Machinery Industry Cooperative) and domestic company A agreed to develop a corn mill jointly with PHilMech, an organization affiliated with the Philippine Ministry of Agriculture. However, research on corn milling was very insignificant, so the development was carried out based on the technology of Korea's rice mill. Rice milling is performed by peeling off the skin of rice and producing brown or white rice, so it is carried out by removing the skin and cutting the skin. On the other hand, in the corn mill, the skin of the corn is peeled, pulverized and selected to produce main products suitable for edible use. Therefore, in order to develop a corn mill, processes such as peeling, transfer, grinding, sorting, and by-product separation are required, and suitable parts must be developed. In addition, the performance must be gradually improved through experiments in which corn is repeatedly milled. The Philippines produces 7.98 million tons/year of corn, which is about 100 times that of Korea, and is mostly consumed as a staple food. This is about 10% of the total crop production in the Philippines. In addition, the main cultivation complexes of corn are the mountainous regions of Tarlac or Pangasinan, and the produced corn is 72.4% of the so-called yellow corn called Arabel and Sarangani, and the remaining 27.6% are known as white corn. In this study, it was intended to produce grains of 2.5 mm or less suitable for food for yellow corn and to develop a corn mill for 200 kg per hour. Detailed conditions for development are stipulated as more than 55% of the main product recovery rate, more than 31% of the by-product recovery rate, less than 5% of the raw material loss rate, and more than 80% of the embryo dislocation rate. In this study, to achieve this, the overall process of the corn mill was developed, and the optimal conditions for the corn mill were obtained through the development of parts and empirical tests to improve performance. In addition, it was intended to achieve the development goal by evaluating and analyzing the performance of each part so that it did not conflict.

국내 유입 가능성이 높은 검역 관리해충인 Spodoptera eridania 및 S. ornithogalli는 전 세계적으로 토마토, 콩 등 여러 종의 작물을 가해하는 광식성 해충이다. 이에 따라 국내 유입 시 해당 작물에 높은 경제적 피해를 입힐 가능성 이 있으므로 신속 정확한 진단이 필요한 실정이다. 따라서 본 연구에서는 상기 두 종을 대상으로 현장 활용이 가능한 LAMP 진단법 개발을 수행하였다. 표적종 두 종 및 비표적종 11종(국내 발생 Spodoptera 종 및 동일 기주 가해종 등)의 전장유전체 정보를 확보한 후 비교 분석을 통해 각 표적종 별 특이적 영역을 확보한 후 해당 영역을 대상으로 LAMP 프라이머를 제작하였다. DNA 농도 10 ng/μL, 반응시간 40분을 기준으로 LAMP 진단을 수행한 결과, Spodoptera eridania는 5개의 LAMP 진단 마커를 개발하였고, S. ornithogalli는 3개의 LAMP 진단 마커를 개발하였다.

연중생산이 가능하고 특히, 저온에서 화색발현이 우수하며 볼륨감 있는 스프레이국화 신품종을 개발하기 위하여 충청남 도농업기술원 화훼연구소에서 2010년에 모본으로 황색의 홑꽃 ‘SP09-251-01’를 부본으로 ‘SP08-010-16’계통을 인공수분 하였다. 종자 파종은 2011년에 실시하였고, 실생개체 중 화색과 화형이 우수한 281번째 개체를 선발하여 ‘SP11-103-05’로 계통명을 부여하였다. 주년생산성 검정을 위하여 2011년부터 2013년까지 자연일장, 전조재배, 차광재배를 각각 실시하였고, ‘Yes Holic’과 화형, 화색, 초형이 비슷한 ‘Jazz’ 품종을 대조품 종으로 사용하였다. ‘Yes Holic’ 품종은 2013년에 국립종자원에 품종보호 출원을 하였다. ‘Yes Holic’은 황색(Yellow 7A)의 꽃잎과 녹색(Green 1B)의 화심색으로 조사되었고 자연일장 작형의 개화기는 10월 25일로 ‘Jazz’의 10월 26일에 비해 빨랐다. ‘Yes Holic’의 초장과 줄기굵기는 각각 80.2cm와 6.1mm 로 ‘Jazz’의 78.6cm와 5.3mm보다 컸다. ‘Yes Holic’의 꽃 직경은 4.4cm로 ‘Jazz’의 4.1cm보다 컸으며, 착화수도 ‘Yes Holic’ 가 29.4개로 ‘Jazz’의 22.1개보다 많았다. 흰녹병저항성은 ‘Yes Holic’이 10%이하의 발병율인 3단계로 흰녹병이 저항성이 높은 것으로 확인되었다. 재배상 유의사항은 ‘Yes Holic’은 소등 후 야간온도를 18℃로 가온하면 고유화색 발현과 적당한 착화수 확보 및 균일한 개화가 가능하다. 그리고 여름철 고온기에는 ‘Yea Holic’의 총포에 잿빛곰팡이병이 주로 발생되므로 스크린과 포그를 활용하여 주간온도를 낮추고 봉오리 착색기에 전용 농약을 살포해 주어야 한다.

This study demonstrates that low processing rate for producing polyacrylonitrile (PAN)-based carbon fiber is a critical to obtain a homogeneous radial microstructure with high resistance to oxidation, thereby resulting in their improved mechanical strength. The dry-jet wet spun PAN organic fibers were processed (e.g., stabilized and then carbonized) utilizing two different rates; one is 1.6 times longer than the other. The effect of processing rate on the microstructural evolutions of carbon fibers was analyzed by scanning electron microscopy after slow etching in air, as well as Raman mapping after graphitization. The rapidly processed fiber exhibited the multilayered radial structure, which is caused by the radial direction stretching of the extrusion in the spinning. In case of the slowly processed fiber, the layered radial structure formed in the spinning process was changed into a more homogeneous radial microstructure. The slowly processed fibers showed higher oxidation resistance, higher mechanical properties, and higher crystallinity than the rapidly processed one. Raman mapping confirmed that the microstructure developed during spinning was sustained even though fiber was thermally treated up to 2800 °C.

We report a facile and versatile strategy to prepare multi-dimensional nanocarbons hybridized with mesoporous SiO2. Carbon nanoplatelets (CNPs, two-dimensional structure of nanocarbons) were combined with carbon nanotubes (CNTs, onedimensional nanocarbons) to form multi-dimensional carbons (2D–1D, CNP–CNTs). The CNP–CNTs were synthesized by directly growing CNTs on CNPs. A simple solution-based process using TEOS (tetraethyl orthosilicate) resulted in coating or hybridizing CNP–CNTs with mesoporous silica to produce CNP–CNTs@SiO2. The nanocarbons’ surface area significantly increased as the amount of TEOS increased. Electrochemical characterizations of CNP–CNTs@SiO2 as supercapactior electrodes including cyclic voltammetry and galvanostatic charge–discharge in 3 M KOH (aq) reveal excellent-specific capacitance of 23.84 mF cm−2 at 20 mV s−1, stable charge–discharge operation, and low internal resistance. Our work demonstrates mesoporous SiO2 on nanocarbons have great potential in electrochemical energy storage.

고온기 화색발현이 우수하고 연중생산이 가능한 수출용 스프레이국화 신품종을 육성하기 위하여 충남농업기술원 화훼 연구소에서 2010년 분홍색의 모본 ‘Borami’를 방임수분하였다. 2011년에 종자를 파종하였고, 이중 화형과 화색이 우수한 개체를 선발하여 ‘SP11-148-01’로 계통명을 부여하였다. 2011년부터 2013년까지 주년 생산성을 위해 전조, 자연, 차광재배로 특성을 각각 검정하였고, 생육 및 개화특성은 화형과 화색이 비슷한 자주색 스프레이국화인 ‘Kingfisher’를 대조품종으로 조사하였으며, 2013년 ‘Yes Ruby’로 품종등록 출원하였다. ‘Yes Ruby’는 자주색의 설상화와 연녹색의 통상화로 가을 작형 개화기는 10월 24일로, ‘Kingfisher’의 10월 29일에 비해 빨랐다. ‘Yes Ruby’의 초장과 줄기굵기는 각각 94.9cm와 7.7mm로 ‘Kingfisher’의 89.2cm와 6.4mm보다 컸다. ‘Yes Ruby’의 꽃 직경은 6.2cm로 ‘Kingfisher’의 5.0cm보다 컸으며, 꽃잎수도 ‘Yes Ruby’가 25.7개로 ‘Kingfisher’의 23.3개보다 많았다. 착화수는 두 품종 모두 비슷하였으며, 흰녹병 저항성은 ‘Yes Ruby’가 2단계, ‘Kingfisher’는 3단계의 감염 정도를 나타내어 흰녹병에 대한 저항성이 높은 것으로 나타났다. 재배상 유의사항은 ‘Yes Ruby’는 겨울철 균일한 개화가 이뤄지지 않아 겨울철 야간온도를 18℃ 이상으로 관리해줌으로써 균일개화를 유도할 수 있다. 또한 생장억제제인 Daminozide을 처리함으로써 설상화수를 늘려 볼륨감 높은 꽃봉오리를 형성할 수 있어 고온기에도 화색발현이 우수하고 연중생산이 가능하여 안정적 수출을 통한 농가소득 증대에 기여할 수 있을 것으로 기대된다.

본 연구를 통해 잔디주머니나방속이 국내에서 처음 발견되어 보고한다. 잔디주머니나방속내 잔디주머니나방에 대한 성충, 유충, 번데기 등 형태학적 특징을 재기재하였다. 또한 신속한 종 동정을 위한 DNA바코드 정보를 제공하였다.

The genus Nipponopsyche Yazaki is reported from Korea with an unrecorded species, N. fuscescens Yazaki for the first time. Adult, larva, pupa and genitalia of the species are redescribed with SEM illustrations, and DNA barcode for precise identification of the species is also provided.