In this study, Bacillus sp. SRCM 112835 was isolated from soybean paste (Doenjang, Korean Fermented Soy Paste). Bacillus sp. SRCM 112835 showed biosorption of the Cu (II) in aqueous solution. The strain effectively absorbed 30.2% of the Cu (II) from a 52.3 mg/L within 60 min. The properties of the Bacillus sp. SRCM 112835 were investigated by Fourier transform infrared spectroscopy (FT-IR), point of zero charge (pHpzc), and phylogenetic analysis. The influence of initial pH (2.08-9.98) and biomass dosage (0.005-0.07 g) were likewise probed. Isotherm and kinetic experiment results suggested that the Langmuir isotherm and pseudo-second-order kinetic models well-fitted the experimental data, respectively.

해충의 예찰 없이 작물 정식 초기에 천적을 먼저 적용할 수 있는 천적-서식처 혼합적용(Natural Enemy in First; NEF)기법의 방제효과를 확인하였다. 시설 딸기에서 조사 12주차에 NEF처리구와 천적 단독 처리구에서 친환경자재 처리구 대비 각 83%, 70%의 점박이응애 밀도 억제효과를 확인할 수 있었다. 또한 예찰 없이 작물 정식 초기에 NEF를 적용한 처리구에서 천적 단독 처리구보다 3배 이상의 높은 천적 밀도를 확인하였다.

This study aimed to examine the effect of a mild elevation in serum cholesterol level in a porcine coronary overstretch restenosis model using a balloon angioplasty catheter or drug-eluting coronary stent. Pigs were divided into two groups and were fed a commercial normal diet (CND, n = 4) or a high-fat diet (HFD, n = 4) for 5 weeks. Coronary overstretch injury by balloon angioplasty or stent implantation was induced in the left anterior descending and left circumflex artery after 1 week of feeding. Histopathological analysis was performed at 4 weeks after coronary injury. During the experiment, the total cholesterol level in the HFD group increased by approximately 44.9% (from 65.9 ± 3.21 mg/dL at baseline to 95.5 ± 9.94 mg/dL at 5 weeks). The lumen area in the CND group was reduced in comparison with that in the HFD group after balloon angioplasty. After stent implantation, the injury score showed no significant difference. There were significant differences in the neointimal area (2.7 ± 0.33 mm2 in the CND group vs. 3.3 ± 0.34 mm2 in the HFD group, p<0.05), lumen area (2.6 ± 0.54 mm2 in the CND group vs. 2.0 ± 0.33 mm2 in the HFD group, p<0.05), and percent area stenosis (52.0 ± 7.96% in the CND group vs. 62.4 ± 5.15% in the HFD group, p<0.05). Body weight change was not different between the two groups. Increased serum cholesterol level activated vascular smooth muscle cell proliferation in the porcine coronary overstretch model.

Mesenchymal stem cells (MSCs) are capable of differentiating into mesenchymal tissue such as bone, cartilage, muscle, and adipose, and have been isolated and characterized from various species. Deer adipose tissue-derived MSCs (dAD-MSCs) have not been studied and deer bone marrow-derived MSCs (dBM-MSCs) have not been fully characterized. In this study, we firstly isolated MSCs from deer tissues and then compared characteristics of dAD-MSCs and dBM-MSCs. dAD-MSCs and dBM-MSCs exhibited significant increase in proliferation under low-glucose DMEM culture condition during 20 and 10 passages consecutive passages, respectively. Both cells expressed cell surface markers such as CD73, CD90, and CD105, but did not express CD34 and CD45. Two types of cells expressed stemness markers (Oct4, Sox2, and Nanog) and exhibited differentiation potential into mesodermal lineages. Both cells exhibited osteogenic and chondrogenic differentiation potential, but poor adipogenic differentiation potential. Specifically, dAD-MSCs have a greater capacity for chondrogenic differentiation potential compared to dBM-MSCs. Collectively, we successfully isolated dAD-MSCs from deer for the first time. This study suggests that adipose tissue of deer could be used as a source of deer MSCs.

In this study, pitch crosslinked by oxygen function groups was made into activated carbon (AC) and pore structure was observed. The oxygen functional groups were introduced by the addition of waste PET for pitch synthesis. Activation agent ratios used to obtain the AC during the activation process were 1:1, 1:2 and 1:4 (pitch:KOH, w/w). The oxygen content in the prepared pitch was characterized by elemental analysis. Also, the molecular weight of pitch was investigated by MALDITOF. Specific surface area and micropore volume of the prepared AC were determined by the argon adsorption–desorption analysis and calculated using the Brunauer–Emmett–Teller and Horvath–Kawazoe equations, respectively. Micropore fraction of PET-free AC was smaller than that of PET-added AC. At high activation agent ratio, mesopores were created when the micropore structure collapsed. However, in the PET-added AC, due to the oxygen crosslinking effect, the micropore structure and micropore size were maintained even at a high activation agent ratio. Therefore, PET AC was found to have a higher micropore fraction than that of PET-free AC.

Acute myocardial infarction (AMI) is considered the major cause of mortality in the world. Tremendous animal studies are performed to develop novel therapeutics, and this study aimed to induce porcine myocardial infarction model by using polyethylene terephthalate (PET). Coronary guidewire was placed in left anterior descending artery (LAD). The balloon angioplasty catheter was inserted at the back of the PET. The balloon catheter was carefully pushed forward, until the balloon marker was located in mid-LAD. Coronary angiography was performed pre- and post-occlusion at 28 days by C-arm. Histologic analysis of heart tissue was performed 28 days after inducing AMI. Thirty three pigs were anesthetized and underwent percutaneous coronary catheterization. All pigs were successfully embolized in mid-LAD by PET. Fifteen pigs died due to ventricular fibrillation during post-anesthetic recovery time, and overall experiment mortality was 45.5%. In 2,3,5- triphenyl tetrazolium chloride staining, gross finding of the ischemic heart lesion showed firm and white area of infarction associated with the apex and left ventricular posterior wall. Infarct on H&E-stained sections demonstrated a region without myocytes and rich with cardiomyocyte with atypical nuclei. Successful induction of AMI by using PET may provide the pathophysiological information of ischemic heart disease and improvement of therapy development for AMI.

This study provides an economical and effective method to improve the interlaminar properties of carbon fiber-reinforced polymers (CFRPs) using aluminum trihydroxide (ATH) microparticles. ATH microparticles are cheap and are expected to show good affinity to epoxies in the matrix and sizing agents of the carbon fibers owing to the presence of three hydroxyl groups. In addition, ATH particles are reported to improve the mechanical properties of polymers when used as the reinforcement. In this study, ATH microparticles of various sizes, 1.5, 10, and 20 μm, were used to improve the interlaminar properties of the CFRPs. ATH particles with a size of 1.5 μm improved the tensile properties of the ATH/epoxy resin and did not significantly alter the curing behavior. The interfacial adhesion between the carbon fiber and the epoxy resin was also improved, and the impregnation of the resin mixture remained similar to that of the neat resin, resulting in no significant void and defect formation. Considering the above results, the resulting 1.5 μm ATH-reinforced CFRP showed improved interlaminar properties compared to CFRP without ATH. However, 10 and 20 μm ATH-reinforced CFRPs showed deteriorated interlaminar properties due to the diminished tensile properties of the resin itself and resin impregnation, which resulted in more voids and defects, despite the interfacial adhesion between the fiber and the matrix resin.

Biological control is becoming an increasingly important part of integrated pest management programs in Korea. For this reason, effective and sustainable insect pest management is a priority for many growers. And the success of biological control depends upon the use of the economical methods such as a combination of proper natural enemies and plants (banker, habitat, trap, companion, etc.). For the last nine years, we have developed simple and reliable new habitat plants system with natural enemies, and named it『Natural Enemy in First Method』that we are introducing here. Our goal was to better understand the potential for effective use of beneficial insects and their habitat plants for the management of thrips, spider mites, and aphids in greenhouses. This approach is being developed to improve biological control in various crops in Korea.

본 연구는 지속가능한 유기농업의 실천을 위하여 국내 작부체계와 농업환경에 적합한 한국형 현장적용 기법을 구축하고자 수행하였다. 본 연구의 기본 개념은‘Natural Enemy in First (NE가 먼저)’로 해충 발생시기의 예찰 없이 주 작물을 정식함과 동시에 천적과 선발한 보조식물을 혼합 적용해서 해충발생 이전에 천적을 포장에 먼저 정착시키는 생물적 방제기법이다. 미끌애꽃노린재 서식처로 Portulaca sp.를, 콜레마니진디벌 서식처로 옥수수를 선발하여 시설 토마토에서 방제효과를 확인하였다. 미끌애꽃노린재 단독처리와 천적 서식처(Portulaca sp.) 혼합처리구에서 관행방제 처리구(약제처리)대비, 각각 82%, 73%의 총채벌레 밀도 억제 효과를 확인할 수 있었다. 진딧물의 경우, 모든 처리구에서 3줄기 당 평균 0.5마리 이하의 낮은 밀도를 유지하였다.