Modified thermal annealing was applied to the activation of the polycrystalline silicon films doped as p-type through implantation of B2H6. The statistical design of experiments was successfully employed to investigate the effect of rapid thermal annealing on activation of polycrystalline Si doped as p-type. In this design, the input variables are furnace temperature, power of halogen lamps, and alternating magnetic field. The degree of ion activation was evaluated as a function of processing variables, using Hall effect measurements and Raman spectroscopy. The main effects were estimated to be furnace temperature and RTA power in increasing conductivity, explained by recrystallization of doped ions and change of an amorphous Si into a crystalline Si lattice. The ion activation using rapid thermal annealing is proven to be a highly efficient process in low temperature polycrystalline Si technology.

We fabricated 10 nm-TiO2 thin films for DSSC (dye sensitized solar cell) electrode application using ALD (atomic layer deposition) method at the low temperatures of 150˚ and 250˚. We characterized the crosssectional microstructure, phase, chemical binding energy, and absorption of the TiO2 using TEM, HRXRD, XPS, and UV-VIS-NIR, respectively. TEM analysis showed a 10 nm-thick flat and uniform TiO2 thin film regardless of the deposition temperatures. Through XPS analysis, it was found that the stoichiometric TiO2 phase was formed and confirmed by measuring main characteristic peaks of Ti 2p1, Ti 2p3, and O 1s indicating the binding energy status. Through UV-VIS-NIR analysis, ALD-TiO2 thin films were found to have a band gap of 3.4 eV resulting in the absorption edges at 360 nm, while the conventional TiO2 films had a band gap of 3.0 eV (rutile)~3.2 eV (anatase) with the absorption edges at 380 nm and 410 nm. Our results implied that the newly proposed nano-thick TiO2 film using an ALD process at 150˚ had almost the same properties as thsose of film at 250˚. Therefore, we confirmed that the ALD-processed TiO2 thin film with nano-thickness formed at low temperatures might be suitable for the electrode process of flexible devices.

The present work was performed to investigate the effect of coiling temperature on the annealed texture in Cu/Nb-added ultra-low-carbon steels. The ultra-low-carbon steels were coiled at 650 and 720˚C, respectively. The result showed that the Cu-added ultra-low-carbon steel at a low coiling temperature produced a desirable annealed texture related to good formability. On the other hand, Nb-added ultra-low-carbon steel at a high coiling temperature also produced a desirable texture. This is attributed to the effect of Nb, which retards recrystallization during the coiling process.

A sensor element array for combinatorial solution deposition research was fabricated using LTCC (Low-temperature Co-fired Ceramics). The designed LTCC was co-fired at 800˚C for 1 hour after lamination at 70˚C under 3000 psi for 30 minutes. SnO2 sol was prepared by a hydrothermal method at 200˚C for 3 hours. Tin chloride and ammonium carbonate were used as raw materials and the ammonia solution was added to a Teflon jar. 20 droplets of SnO2 sol were deposited onto a LTCC sensor element and this was heat treated at 600˚C for 5 hours. The gas sensitivity (S = Ra/Rg) values of the SnO2 sensor and 0.04 wt% Pd-added SnO2 sensor were measured. The 0.04 wt% Pd-added SnO2 sensor showed higher sensitivity (S = 8.1) compared to the SnO2 sensor (S = 5.95) to 200 ppm CH3COCH3 at 400˚C.

The dc resistivity and thermoelectric power of bilayered perovskite La1.4(Sr0.2Ca1.4)Mn2O7 weremeasured as a function of the temperature. In the ferromagnetic phase, ρ(T) was accurately predicted by a0+a2T2+a4.5T4.5 with and without an applied field. At high temperatures, a significant difference between theactivation energy deduced from the electrical resistivity and thermoelectric power, a characteristic of smallpolarons, was observed. All of the experimental data can be feasibly explained on the basis of the small polaron.

In this study we attempted to analyze the change of protein and mycelial activity during low temperature storage progressed. At first, esterase and peroxidase isozymes were detected at third and fourth subculture in Pleurotus ostreatus and peroxidase isozymes in Pleurotus eryngii were detected at first and second subculture but esterase isozymes showed almost same band patterns subculture advanced. The decolorization ratio of media color including indicator were decreased according to subculture advanced in P. ostreatus and P. eryngii. However there were not significantly difference of mycelial growth, fruit body yield, esterase isozyme band pattern and laccase activity of P. eryngii according to storage periods at low temperature. Therefore, it was possible to store sawdust spawn of P. eryngii at 4℃ for 120days.

감나무의 휴면 정도에 따른 내동성을 비교하고자 '부유', '상서조생', '서촌조생', 갑주백목', '청도반시' 등의 1년생 가지를 1월 20일, 2월 20일, 3월 20일에 각각 채취하여 -5, -10, -15, -20, -25 및 -30℃ 등으로 처리한 후 전해질 누출률, TTC 검정 및 눈의 발아율을 조사하였다. 전해질 누출률은 1월 20일의 가지에서 가장 낮았고, 3월 20일의 가지에서 가장 높았다. '부유'라 '청도반시' 가지의 전해질 누출률은 1월 20일에서 높았고 2월 20일에는 낮았으며, '상서조생'과 '서촌조생'은 반대의 경향이었고, '갑주백목'은 중간 정도 수준이었다. TTC 검정을 통한 흡광률은 1월 20일의 가지에서 가장 높았고, 2월 20일과 3월 20일의 가지에서는 낮았다. '부유'와 '상서조생' 가지의 흡광률은 1월 20일과 3월 20일에서 낮고 2월 20일에서는 높은 경향이었다. '서촌조생'과 '갑주백목'의 가지는 채취시기에 관계없이 높은 수준이었다. 눈의 발아율은 2월 20일의 가지에서 가장 높았고 3월 20일의 가지에서 낮았다. 그리고 대부분 품종의 발아율은 휴면정도에 관계없이 -20℃ 처리에서 전혀 발아하지 않았다. '부유', '서촌조생' 및 '청도반시'의 가지는 휴면정도에 관계없이 비교적 높았지만 '상서조생'의 가지는 낮았다. '갑주백목'의 가지는 1월 20일에만 높은 수준이었다. 따라서 감나무의 내동성은 휴면 타파 후 가장 약하며, 떫은감과 단감 간 차이는 거의 없는 것으로 생각된다.

In this study we attempted to analyze the change of protein and mycelial activity during low temperature storage progressed. At first, esterase and peroxidase isozymes were detected at third and fourth subculture in Pleurotus ostreatus and peroxidase isozymes in Pleurotus eryngii were detected at first and second subculture but esterase isozymes showed almost same band patterns subculture advanced. The decolorization ratio of media color including indicator were decreased according to subculture advanced in P. ostreatus and P. eryngii. However there were not significantly difference of mycelial growth, fruit body yield, esterase isozyme band pattern and laccase activity of P. eryngii according to storage periods at low temperature. Therefore, it was possible to store sawdust spawn of P. eryngii at 4℃ for 120days.

오이묘가 저온피해를 입기 전, 후 토양수분조건과 몇 가지의 화학물질처리가 오이묘의 냉해 경감에 미치는 영향을 연구한 결과 토양수분 -0.3bar 적습상태에서 07:00시에 2℃로 저온처리를 했을 때, 생존율은 28.3%이었으나 -5.5bar에서는 83.3%로 높아져 토양수분이 건조하면 저온피해가 감소되었다. 그러나 18:00시에 저온처리하면 -0.3bar에서도 생존율은 87% 이상이었다. 토양수분이 건조하면 엽신의 ABA함량은 크게 증가되었다. 저온처리 전, 후 ABA의 토양 및 엽면처리는 오이묘의 생존율을 유의하게 증가시켰고 세포의 전해질 누출량도 현저하게 감소시켰으며, 수량의 감소를 경감시켰다. 또한 ABA 처리는 저온처리 후보다는 저온처리 전에, 엽면처리보다는 토양에 처리하는 것이 보다 효과적이었다. ABA(10-5M)와 더불어 요소(0.2%)와 KH2PO4의 엽면살포는 오이의 생장과 수량에 미치는 저온피해를 경감시키는데 효과적이었다.

The pyrolysis of high density polyethylene(HDPE) and low density polyethylene(LDPE) was carried out at temperature between 425 and 500℃ from 35 to 80 minutes. The liquid products formed during pyrolysis were classified into gasoline, kerosene, gas oil and wax according to the petroleum product quality standard of Korea Petroleum Quality Inspection Institute. The conversion and yield of liquid products for HDPE pyrolysis increased continuously according to pyrolysis temperature and pyrolysis time. The influence of pyrolysis temperature was more severe than pyrolysis time for the conversion of HDPE. For example, the liquid products of HDPE pyrolysis at 450℃ for 65 minutes were ca. 30wt.% gas oil, 15wt.% wax, 14wt.% kerosene and 11wt.% gasoline. The increase of pyrolysis temperature up to 500℃ showed the increase of wax product and the decrease of kerosene. The conversion and yield of liquid products for LDPE pyrolysis continuously increased according to pyrolysis temperature and pyrolysis time, similar to HDPE pyrolysis. The liquid products of LDPE pyrolysis at 450℃ for 65 minutes were ca. 27wt.% gas oil, 18wt.% wax, 16wt.% kerosene and 13wt.% gasoline.

월동기간 동안 zoysiauass [Zoysia matrella (L.) Merr]와 creeping bentgrass(Agrostis palustris Hunds)의 뿌리에서 저온 스트레스에 대한 생리학적 반응을 규명하기 위해 지질과산화 정도와 효소적 항산화 반응 및 탄수화물의 변화를 조사하였다. 1월 말 Creeping bentgrass의 뿌리 고사율은 zoysiagrass 보다 약 20% 현저히 높게 나타났다. Creeping bentgrass의

To co-fire with commercial LTCC (Low Temperature Co-fired Ceramic) materials at , different contents of were added to the (BZN) ceramics. According to the test results, the cubic phase of BZN was transformed into orthorhombic in all the test materials. phase was formed in test materials with of addition. The phase transformation of cubic BZN was controlled during the synthesis process with excess ZnO content. The Cubic and orthorhombic phases of BZN could coexist and be sintered densely at .

The shrinkage variation of Low Temperature Cofired Ceramics(LTCC) limits the size of the substrates that impose limitations on embedded passive components. This paper focuses on the method of minimizing or controlling planar shrinkage and reducing distortion during firing. The laminated sheets of alumina and glass were sintered at varying temperature, and depending on the amount of the glass ceramics. When the sintered of multi-layer structure with , the glass infiltrated entirely into layer at the temperature of about or higher.

The effect of tempering temperature and microstructure on dry sliding wear behavior of quenched and tempered PM with 0.3% graphite and 1-2% Ni steels was investigated. The sintered specimens were quenched from 890℃ and then tempered at 200℃ and 600℃ for 1 hr. Wear tests were carried out on the quenched＋tempered specimens under dry sliding wear conditions using a pin-on-disk type machine at constant load and speed. The experimental results showed that the wear coefficient effectively increased with increasing tempering temperature and decreased with increasing Ni content.