Hybrid graphene/h-BN model is studied via molecular dynamics simulation to observe the evolution of graphene layer upon heating. Model containing 20,064 atoms is heated up from 50 to 8000 K via Tersoff and Lennard–Jones potentials. Various thermodynamic quantities, structural characteristics, and the occurrence of liquid-like atoms are studied. The Lindemann criterion for 2D case is calculated and used to observe the appearance of liquid-like atoms. The atomic mechanism of structural evolution upon heating is analyzed on the basis of the occurrence/growth of liquid-like atoms, the formation of clusters, the coordination number, and the ring statistics. The liquid-like atoms tend to form clusters and the largest cluster increases slightly in order to form a single largest cluster of liquid-like atoms. The other models such as free-standing graphene, zigzag GNR, and armchair GNR are also presented to have an entire picture about the evolution of graphene upon heating in different models. Note that the largest clusters of free-standing graphene as well as zigzag GNR, and armchair GNR tend to decrease to form a ring-like 2D liquid carbon.

최근 FRP 보강공법의 보강성능 저하 요인으로 발생하는 박리파괴를 방지하고자 다양한 앵커리지 시스템이 개발되고 있다. 본 연구는 기존 사용되고 있는 기계식 정착 앵커와 FRP 앵커를 복합하여 새로운 메커니즘의 Hybrid 앵커모델을 개발하였다. Hybrid 앵커를 개발하기 위해 다양한 종류의 기계식 앵커와 Carbon 및 Aramid 섬유를 조합하였다. 개발된 다양한 앵커모델에 대한 특성을 평가하고자 Pull out 강도 실험을 수행하였다. 예비 실험 결과 Drop-in 앵커와 Undercut 앵커의 경우 낮은 정착력으로 적용에 한계가 있었다. Stud 앵커는 높은 정착력을 확인하였으며, 앵커와 FRP를 결합하기 위해서는 일체화가 중요한 것으로 나타났다. 일체화를 위해 앵커 내부에 홀을 천공하여 FRP rod를 결합하는 형태로 I-Hybrid 앵커를 제작하였다. I-Hybrid 앵커 의 경우 앵커 내부 홀에서 뽑히는 거동을 보였다. 따라서 향후 연구에서 I-Hybrid 앵커가 일체화된다면 FRP 박리파괴 저감에 효과적일 것으로 사료된다.

Chlorination and UV illumination are being widely applied to inactivate a number of pathogenic microbials in the environment. Here, we evaluated the inactivation efficiency of individual and combined treatments of chlorination and UV under various aqueous conditions. UV dosage was required higher in waste water than in phosphate buffer to achieve the similar disinfecting efficiency. Free chlorine generated by electrolysis of waste water was abundant enough to inactivate microbials. Based on these, hybrid system composed of sequential treatment of electrolysis-mediated chlorination and UV treatment was developed under waste water conditions. Compared to individual treatments, hybrid system inactivated bacteria (i.e., E. coli and S. typhimurium) and viruses (i.e., MS-2 bacteriophage, rotavirus, and norovirus) more efficiently. The hybrid system also mitigated the photo re-pair of UV-driven DNA damages of target bacteria. The combined results suggested the hybrid system would achieve high inactivation efficiency and safety on various pathogenic microbials in wastewater.

충청북도농업기술원에서는 연한 분홍색의 향기가 있고, 꽃수가 많으며, 개화기간을 오래 지속할 수 있는 속간 교배종 난 ‘핑키뷰티’를 육성하였다. 신품종 ‘핑키뷰티’는 2007년 Phal. pulcherrima × Phal. parishii 교배종을 모본으로, Neof. falcata ‘Hwacheon’을 부본으로, 속간교배하였다. 종자 발아, 재배, 선발, 특성검정은 2008년부터 2014년까지 진행되었다. 생육이 좋고 꽃의 색, 모양이 우수한 계통을 선발 한후, 2015년부터 2017년까지 3년에 걸쳐 국립종자원 신품종 심사기준으로 특성검정 결과, 우수성이 인정되어 2018년 최종 선발하여 “핑키뷰티”로 명명하였다. 주요 특성은 다음과 같다. 화색은 연분홍색으로 Red-purple Group 68D(RHS칼라차트)이며, 향기가 있고 화경색은 암록색이다. 식물체 크기는 12.7cm로 대조품종과 큰 차이를 보이지 않았다. 잎의 폭은 1.6cm로 대조품종인 P. pulcherrima에 비해 좁은 편이다. 화경장은 25.8 cm이며, 소화수는 16.3개로, 전반적으로 화분의 볼륨감이 우수한 편이다. 꽃의 크기는 2.5cm 정도이며, 꽃의 순판 뒤쪽에 풍란과 같은 짧은 거가 있는 것이 특징이다. 개화기는 5월 하순이며, 개화기간은 34일 정도이다.

호접란 ‘브라보 스타’는 2007년 경남농업기술원 화훼연구소 육종온실에서 Phalaenopsis ‘Kung.’s Red Coral’을 모본으로 Phal. ‘Tzu Chiang Balm’을 부본으로 교배하여 육성한 F1개체 중에서 선발한 유향성 소형 다화 분지성의 신품종이다. 2010 년 실생 개체 중에서 영양생장과 개화특성이 우수한 개체 5개 체를 1차 선발하였고 2011년과 2012년에 계통으로 육성하여 2013-2015년에 각각 1차, 2차, 3차 특성검정을 통하여 품종의 안정성과 균일성을 확인하고 최종한 계통(08-VIO-16)을 선발 하여 직무육성심의를 거쳐 ‘브라보 스타’로 명명하였다. ‘브라보 스타’는 화색이 진한 밝은 핑크(RPN57B)이며 화형은 평피 기이다. 화경은 복총상화서로 분지성이 강하며 화경길이는 29.9cm로 대조품종(Kung’s Red Coral)보다는 큰 편이다. 화수는 상대적으로 다화성 분화품종에 비해 7-8개로 적은 편이 나 4-6개의 대비품종보다는 많은 편이었다. 꽃의 길이와 폭은 5.7cm와 5.2cm로 소형이었고. 향기는 강하고 계피향이 가미된 달콤한 향을 가지고 있으며 꽃잎의 육질이 두껍고 꽃 수명도 2개월 이상으로 길어 선물용 분화품종으로 적합하다고 판단되었다. 엽형은 대비품종이 둥근 원형인 반면, 육성품종의 잎은 긴 선형이며 잎의 길이와 폭은 각각 18cm, 29cm로 대비 품종에 비해 크고 긴 편이고 잎자세는 수평에 가깝다. 육성품 종은 기내 증식율이 높고 식물체가 강건하고 생육이 빠르기 때문에 재배가 용이하다. 2017년 3월에 품종등록(등록번호 제 6719호)되어 종자산업법에 의해 보호받고 있다.

In order to develop the compatible damping device in various vibration source, a hybrid wall-type damper combining slit and friction damper in parallel was developed. Cyclic loading tests and two-story RC reinforced frame tests were performed for structural performance verification. As a result of the 5-cyclic loading test according to KBC-2016 and low displacement cyclic fatigue test, The hybrid wall type damper increased its strength and the ductility was the same as that of the slit damper. In addition, As a result of the two-layer frame test, the reinforced frame had about twice the strength of the unreinforced frame, and the story drift ratio was satisfied to Life Safety Level.

A hybrid mid-story seismic isolation system with a smart damper has been proposed to mitigate seismic responses of tall buildings. Based on previous research, a hybrid mid-story seismic isolation system can provide effective control performance for reduction of seismic responses of tall buildings. Structural design of the hybrid mid-story seismic isolation system is generally performed after completion of structural design of a building structure. This design concept is called as an iterative design which is a general design process for structures and control devices. In the iterative design process, optimal design solution for the structure and control system is changed at each design stage. To solve this problem, the integrated optimal design method for the hybrid mid-story seismic isolation system and building structure was proposed in this study. An existing building with mid-story isolation system, i.e. Shiodome Sumitomo Building, was selected as an example structure for more realistic study. The hybrid mid-story isolation system in this study was composed of MR (magnetorheological) dampers. The stiffnessess and damping coefficients of the example building, maximum capacity of MR damper, and stiffness of isolation bearing were simultaneously optimized. Multi-objective genetic optimization method was employed for the simultaneous optimization of the example structure and the mid-story seismic isolation system. The optimization results show that the simultaneous optimization method can provide better control performance than the passive mid-story isolation system with reduction of structural materials.

‘Morning Bell’ 품종은 생육이 왕성하고 엽소 및 잎마름병에 강하며 꽃이 큰 백합 신품종을 육성하기 위하여 2008년 충남 농업기술원 태안백합시험장에서 교배한 OT(Oriental hybrid× Trumpet hybrid)계통의 종간교잡종이다. 모본으로는 복색(백 색+분홍색)의 OT계통 ‘Altari’ 품종을, 부본으로는 분홍색의 Oriental계통 ‘Solaia’ 품종을 화주절단수분법에 의해 교배한 후 2009년부터 2012년까지 기내 종자배양 및 증식 육묘하여 2013년 우수계통(OT13-9)을 1차 선발하였다. 2013년부터 2015년도에 걸쳐 ‘Candy Club’ 품종을 대조구로 하여 보통재배를 통한 특성검정을 실시하였으며, 2014년 화훼연구소에서 개최 한 신품종 평가회에서 기호성이 우수한 개체를 2차 선발하여 ‘Chungnam OT-3’로 명명한 후 농촌진흥청 농작물직무육성 신품종선정위원회 심의를 거쳐 국립종자원에 ‘Morning Bell’로 품종보호 출원하였다.‘Morning Bell’ 품종의 중부지역 자연 개화는 7월 2일로 ‘Candy Club’ 품종과 비슷하였고 초장은 120.8cm이었다. 진분홍색 반점에 복색(크림색+적색)의 화색과 상향개화성이었다. 잎마름병과 진딧물 등의 병충해 방제를 주기적으로 실시하고, 양수분 관리 등 일반적인 재배관리를 통해 고품질 절화 및 구근생산이 가능하다.

‘Golden Bell’ 품종은 생육이 왕성하고 엽소 및 잎마름병에 강하며 꽃이 큰 백합 신품종을 육성하기 위하여 2007년 충남 농업기술원 태안백합시험장에서 교배한 OT(Oriental hybrid× Trumpet hybrid)계통의 종간교잡종이다. 모본으로는 노랑색의 OT계통 ‘Yelloween’ 품종을, 부본으로는 백색의 Oriental계 통 ‘Muscadet’ 품종을 화주절단수분법에 의해 교배한 후 2008년부터 2010년까지 기내 종자배양 및 증식 육묘하여 2011년 우수계통(OT11-2)을 1차 선발하였다. 2012년부터 2013년도에 걸쳐 ‘Yelloween’ 품종을 대조구로 하여 보통재배를 통한 특 성검정을 실시하였으며, 2012년 화훼연구소에서 개최한 신품종 평가회에서 기호성이 우수한 개체를 2차 선발하여 ‘Chungnam OT-4’로 명명한 후 농촌진흥청 농작물직무육성 신품종선정위 원회 심의를 거쳐 국립종자원에 ‘Golden Bell’로 품종보호 출원하였다.‘Golden Bell’ 품종의 중부지역 자연개화는 6월 16일 로 ‘Yelloween’ 품종과 비슷하였고 초장은 136.4cm이었다. 반점이 없는 노랑색의 화색과 상향개화성을 나타내었다. 재배에 있어서는 잎마름병과 진딧물 등의 병충해 방제를 주기적으로 실시하고, 양수분 관리 등 일반적인 재배관리를 통해 고품질 절화 및 구근생산이 가능하다.

A flexible piezoelectric energy harvester(f-PEH) that converts tiny mechanical and vibrational energy resources into electric signals without any restraints is drawing attention as a self-powered source to operate flexible electronic systems. In particular, the nanocomposites-based f-PEHs fabricated by a simple and low-cost spin-coating method show a mechanically stable and high output performance compared to only piezoelectric polymers or perovskite thin films. Here, the non-piezoelectric polymer matrix of the nanocomposite-based f-PEH is replaced by a P(VDF-TrFE) piezoelectric polymer to improve the output performance generated from the f-PEH. The piezoelectric hybrid nanocomposite is produced by distributing the perovskite PZT nanoparticles inside the piezoelectric elastomer; subsequently, the piezoelectric hybrid material is spin-coated onto a thin metal substrate to achieve a nanocomposite-based f-PEH. A fabricated energy device after a two-step poling process shows a maximum output voltage of 9.4 V and a current of 160 nA under repeated mechanical bending. Finite element analysis(FEA) simulation results support the experimental results.

This study was carried out to investigate the growth characteristics, yield and feed value of Sorghum×Sudangrass hybrid for silage according to the drainage depths in the paddy field of lowland. The experimental design was arranged in a randomized block design with four treatments and three replication. The drainage depths of four treatments were 0cm, 20cm, 40cm and 60cm, respectively. Plant length, leaf length and leaf number were not significantly different, but leaf width increased as the higher the drainage depth(p<0.05). The number of dead leaf was higher in the order of 60cm > 0cm ≥ 40cm ≥ 20cm treatment(p<0.05). Green degree was higher in the order of 20cm > 40cm > 0cm > 60cm treatment(p<0.05). Stem diameter and stem hardness increased significantly as drainage depth increased from 0cm to 60cm(p<0.05). Also, fresh yield, dry matter yield and TDN yield increased as the higher the drainage depth(p<0.05). Crude protein and TDN content were the highest in 40cm treatment(p<0.05). Crude ash was higher in the order of 20cm > 40cm > 0cm > 60cm treatment(p<0.05). ADF and NDF content were the highest in 0cm treatment(p<0.05). Total mineral content was higher in the order of 20cm > 0cm > 40cm > 60cm(p<0.05). Free sugar content(fructose, glucose and sucrose) was the highest in 0cm treatment(p<0.05). Total amino acid(EAA+NEAA) was higher in 40cm than the other treatments(p<0.05). There is a difference in the content of ingredients(crude protein, TDN, mineral, free sugar and amino acid) according to the treatments. But considering dry matter yield and TDN yield, Sorghum×Sudangrass hybrid cultivation is advantageous to set the drainage depth of about 60cm in the paddy field of lowland.

This study was carried out from 2015 to 2016 to identify the suitable sowing and harvesting dates of summer crops in the mountain of Yeongnam, South Korea. The experimental design consisted of the different sowing and harvesting dates as follows: corn hybrid (Z. mays, Kwangpyeongok) of sowing (May 8, 19, and 27) and harvesting (August 10, 20, and 30); sorghum×sorghum hybrid (Sorghum bicolor x Sorghum bicolor, SS405) of sowing (May 27, June 19 and June 27) and harvesting (August 10, 20, and 30). In corn hybrid, ear rate and dry matter (DM) yield decreased (p<0.05) with the postponement of sowing date. Otherwise, ear rate and DM yield increased (p<0.05) with the postponement of harvesting date. Crude protein content decreased (p<0.05) with the postponement of sowing date, but neutral detergent fiber content increased (p<0.05). In sorghum×sorghum hybrid, plant length and DM yield with the postponement of harvesting date increased (p<0.05), while crude protein content with the postponement of harvesting date decreased (p<0.05). This study concluded that sowing corn hybrid in early May and sorghum×sorghum hybrid in early June then harvest in the middle of August was recommend to increase dry matter yield and feed value.

Purpose: The research that uses hybrid model by Schwartz-Barcott & Kim recently gained attention in nursing academies due to its usefulness in practice. The number of research about the concept analysis and concept development using this method has been increased. The purpose of this study was to re-evaluate the Hybrid Model by Schwartz-Barcott & Kim. Methods: This study provided the concept, research design, research trends of Hybrid model through the comprehensive literature review and researcher’s analytical thinking. Results: Hybrid model was generally accepted in the literature as a new and comprehensive methodology. The design of Hybrid model, major components, strategies for sampling and data analysis, and usefulness of Hybrid model were examined. Also the research methodology in published articles in Korea were analysed. Conclusion: Hybrid model is very unique in terms as a method for concept analysis and development in the strength of combining theoretical analysis and empirical observation. Nursing researchers may take advantages of the Hybrid model in exploring nursing phenomena and concept in their research.