Finite element analysis is conducted for investigation of structure behavior of high strength concrete(HSC) column-normal strength concrete(NSC) slab connection according to aspect ratio(h/c). Analysis method is verified through comparison of experiment and analysis. As a result, regarding to the aspect ratio, the ultimate strength of column-slab connection decreased as the column dimension increased while the slab thickness did not influence on the ultimate strength of the connection.

In this study, comparative analysis has been performed with regard to a bending stress and deformation at bottom slab of a concrete floating container terminal by live load distributions. In addition, a structural performance and behavior of the floating structure is considered using a numerical analysis. Through reviewed structural performance of a floating structure by live load distribution, the structure presented tensile behavior by two live load cases (A, B, D-type). Then, the other live load cases (C, E, F, G, H, I, J-type) shows compressive behavior. Especially, immoderately compressive stress was generated on bottom slab at specific load distribution. but, that should be decreased through controling buoyancy pre-flexion. Through reviewed structural behavior, slopes of structure by four live load cases (B, E, F, H-type) were exceeded in design criteria of mega-float. It should be estimated that it get out of the load case at loading container. In all, the present study can be considered as a benchmark of a floating container terminal in the absence of analysis and will be used to guide-line about serviceability of concrete floating container terminal.

최근 구조물의 노후화에 따른 급속 교체, 교통 영향 및 환경 영향 최소화의 요구에 따라 프리캐스트 기술을 활용한 모듈러 교량 연구가활발하게 진행중에 있다. 본 연구는 모듈러 교량과 관련된 연구의 일환으로 모듈러 슬래브 교량의 횡방향 연결부를 대상으로 반복하중 재하 실험을 통하여 횡방향 연결부의 반복 하중에 따른 구조적 거동 특성을 파악하고 사용성 평가하였다. 반복하중의 크기를 결정하기 위하여 RC 보를 1개 제작하였으며 반복하중 재하 실험을 위하여 일체형 RC 보 1개와 분절형 실험체 3개를 제작하였다. 실험결과, 분절형 실험체는 하중 반복 횟수가 증가함에 따라 처짐 및 균열폭이 거의 일정하거나 수렴하는 경향을 나타냈으며, 일체형 RC 보와 비교하여 최대처짐, 잔류처짐, 균열폭 모두 작게 나타났다. 또한 사용하중을 반복 재하한 실험체의 경우, 처짐 및 균열에 대한 사용성 기준을 모두 만족하였다.

The quality of injection sealer for water leakage maintenance be being managed by KS. However, the test result of response to the substrate movement performance have some errors by an experimenter. Therefore, this revision standard of test method is proposed by that the new tester is manufactured for solving this errors in this study.

This study aimed to simulate the complex behavior of structures and predict test results. For this, the leading nonlinear model ‘Bouc-wen model’ was used, and rubber bearing and MR-damper were investigated. While seismic load was being applied, complex behavior of continuous structures was simulated. To test simulation performances, in addition, a seismic response test of the model structure was conducted using shaking table. Then, each structure’s displacement data were compared to simulation results. This study found that nonlinear model-based simulation results were mostly matched with test results, and they are applicable to the prediction of test results.

The SPC wall girder is connected to the vertical walls to enhance performance of wall-wall girder connection. The purpose of this study is to investigate the structural characteristics such as strength, Load-displacement relation of wall-wall girder connection under the monotonic load tests. The fracture pattern of the specimens induced positive moment at connection was steel plate separation from concrete in SPC Wall.

This study attempted to assess performances of adopted MR-damper to control the complex behavior caused by the interaction of independent continuous structures. For this, MR-damper (30kN) was designed and fabricated, and the MR-damper model was investigated using the Nonlinear Bingham Plastic Damper (NBPD). To assess experimental performances, a control test on the model structure was performed while El-centro 150% of seismic load was being applied. Then, MR-damper was placed between two independent structures to have it control independent displacement and complex behavior between the two structures. This study found that MR-damper is effective in controlling complex behavior of structures.

A dynamic displacement estimation system is developed by integrating laser Doppler vibromter (LDV) and light detection and ranging (LiDAR). The system includes hardware level integration for simultaneous measurement of two devices and data fusion of two measurement signals based on Kalman filter smoothing algorithms. For hardware integration of two devices, the laser beam directions and the triggering of measurement of LDV and LiDAR are controlled on the level of built-in commands of the devices. The distance data sequentially measured by LiDAR is converted to dynamic displacement of high noise and low sampling rate, and fused with the velocity measured by LDV which has high sampling rate and low noise but accumulated bias error when integrated. Using the Kalman filter based data fusion algorithm, it is able to estimate dynamic displacement in which the drawbacks of two devices are effectively removed. The proposed system is applied to a dynamic loading test on a highway bridge and the performance is verified.

다양한 열화 인자에 의해 저감된 콘크리트의 내구성은 구조물의 구조적 성능과 사용 수명에 부정적인 영향을 미치게 되며 콘크리트 연구 분야 중에서도 매우 중요하고 매력적인 주제라고 할 수 있다. 이러한 이유로 콘크리트의 내구성과 관련된 많은 연구들이 발표되었으나 물리-화학적 열화에 기인하는 콘크리트의 본질적인 물성 변화에 주된 초점이 맞춰져 왔으며, 콘크리트 내구성과 구조물의 구조적 성능 사이의 관계 정립은 아직 미흡한 실정이다. 본 연구에서는 콘크리트의 강도 감소에 원인이 되는 칼슘 용출 열화를 적용하였으며, 열화 정도에 따른 구조적 거동을 평가하기 위하여 열화 손상을 입은 콘크리트 부재의 압축 및 휨 거동 실험을 수행하고 그 결과를 비선형 유한요소해석 결과와 비교 분석하였다. 연구 결과에 따르면 칼슘 용출 열화는 콘크리트의 압축 강도를 저하시키며, 열화가 진행됨에 따라 취성 거동에서 연성 거동으로 변화되는 경향을 나타냈다. 또한 열화에 의한 압축 영역의 손상 정도가 심화될수록 RC 부재의 내하력과 강성은 저하되었으며, 이러한 구조적 거동은 ABAQUS의 CDP 모델을 사용한 비선형 유한요소해석의 결과와도 비교적 잘 일치하였다.

This study is to introduce a structural analysis method that can apply a unit modular system to a remodeling extension. The structural analysis process, which can reflect the behaviors between the existing building and the modular system, is performed in a five-staged structural analysis. Therefore, the example of structural analysis of an existing building is introduced.

This study is to establish a structural analysis method that can apply a unit modular system to a remodeling extension. Structural design has to be performed after considering the behaviors between the existing structures and the modular system because the modular system is added after the transformation of existing structures has been processed. The structural analysis process, which can reflect the behaviors between the existing building and the modular system, is introduced in a five-staged structural analysis.

Recently, it is more concerned about securing of its seismic safety, as underground structures are significantly recognized. Especially, it is very important that underground structures such as the tunnel of urban railroad or subway ensure the seismic safety of its, because it can be caused an enormous loss of lives and a economical damage by earthquake. When the subway tunnel of cut-and-cover box type is constructed, grounds are excavated and refilled. In this study, the parametric study is performed and analyzed about factors affecting seismic analysis of cut-and-cover tunnel, such as soil type, refilled range, tunnel location, etc. Consequently, it is hoped to provide the preliminary data for a better reasonable review on seismic design and seismic performance assessment of underground structures.

Bending tests on the steel grid composite deck with the prefabricated joint were conducted for the evaluation of bending and failure behavior. The joint of deck is composed of concrete shear key and high-tension bolts. Test results show that deck with the joint has a larger load bearing capacity than continuous deck without joint, and the both decks have almost the same punching shear strength.

The SPC wall girder is connected to the vertical walls to enhance performance of wall-wall girder connection. The purpose of this study is to investigate the structural characteristics such as strength, Load-displacement relation of wall-wall girder connection under the cyclic load tests. The fracture pattern of the specimens was steel plate separation from concrete in SPC Wall induction of tensile crack failure of SPC Wall concrete.

The SPC wall girder is connected to the vertical SPC walls to enhance performance of wall-wall girder connection. The fracture pattern of the SPC wall-wall girder connection was steel plate separation from concrete in SPC Wall. The purpose of this study is to theoretical analysis on fracture behavior of the SPC wall-wall girder connection under the monotonic load test inducing positive moment at connection. The Plastic hinge theory on steel plate of SPC wall girder is proposed to explain steel plate separation fracture pattern.

Traditional ancient tomb is blocked from outside air by the original role of the structure. However, recently at the structure has been excavated and robbed, it is in a state of being opened. It is not easy to prevent durability reduction of structure member according to the opened state. To this end, This study perforns the behavior characteristics evaluation according to durability reduction of traditional ancient tomb.

This paper describes the structure performance of glass fiber-reinforced polymer (GFRP) shear connectors for insulated concrete sandwich panels (CSP). In this study, experiments are conducted to investigate the physical features of insulated CSP with GFRP shear connectors with varying shape and specification of GFRP shear connectors, and types of insulations. Test results indicate that developed GFRP shear connector has a significant effect on structure performance of insulated CSP.

A pipe-rack structure exposed to various environmental conditions is one of the critical structures for the safety of a plant industry. Based on a selected, typical pipe-rack structure, this study evaluated the behavior of the pipe-rack structure accounting for the operating condition of the pipe and at the same time the effect of environmental conditions.

최근 기후변화로 인해 태풍과 같은 자연 재해의 강도와 연간 최대 순간 풍속이 증가됨에 따라 산간 지역에 건설되는 높은 교각을 가진 교량의 경우, 풍하중에 대한 구조 안전성이 저하될 우려가 높아지고 있다. 또한, 최근 소음민원에 따른 교량상 방음벽 설치로 인해 풍하중이 교량에 미치는 영향이 더욱 더 크게 작용함에 따라 지진하중이 교축직각방향에 미치는 영향보다 풍하중에 의한 영향이 더 지배적인 경우도 빈번하게 발생하고 있는 실정이다. 그러므로 풍하중을 받는 교량의 명확한 거동 특성을 고려한 구조 해석 및 설계가 필요하다. 따라서, 본 연구에서는 풍하중에 대한 교량 구조해석의 기존 방법인 상부구조 해석 후 계산된 반력을 하부구조에 직접 재하한 구조해석과 상부와 하부 구조의 상호작용을 고려한 전체계 구조해석을 수행하였으며, 이에 대한 교량의 구조적 거동을 비교 및 분석하였다.