The purpose of this study is to examine the relationship between internal corporate, supplier, and customer integrations for domestic SMEs on non-financial and financial performance through SCM performance such as flexibility and reduction of uncertainties. To this end, data was collected on 286 SMEs in Korea, and the structural relationships between SCM integration level, SCM performances, and management performance were analyzed. As a result of the analysis, first, it was found that the SCM integration level had a significant positive effect on the flexibility and reduction of uncertainties, which are SCM performances. Second, the flexibility and reduction of uncertainties showed significantly positive effects on the non-financial performance of the companies, but did not directly affect the financial performance positively. Third, the non-financial performance was found to have a positive effect on the financial performance. In addition, the SCM integration level did not have a direct effect on the financial and non-financial performance, but it was found that it affected management performance by mediating the flexibility and reduction of uncertainties, which are SCM performances. That is, although the SCM integration level did not directly affect financial and non-financial performance, it was confirmed that it affects management performance by mediating SCM performances, flexibility and uncertainty reduction. In other words, it was confirmed that the SCM integration level directly or indirectly affects SCM performances and overall management performance. These results imply the necessity to focus on competency in the supply chain management area according to the SCM performance expected by SMEs, and the step by step approaches to the expected effects. In a situation where prior SCM related studies have not been able to present SCM performances and management performance of SMEs that are relatively lacking in their capital and SCM construction capabilities, the findings of this study could suggest the importance of SCM integration from the perspective of SMEs. In addition, from the viewpoint of SMEs, this study suggested that a sequential approach for performance measurement is required (SCM performance → management performance) in relation to the performance factors to be established through SCM. 1

This study was performed to investigate the characteristics of VOCs and carbonyl compounds emitted by smallscale master, offset, and screen printing facilities. During the printing process, concentration measurements of indoor samples were made at each on the printer equipment and the indoor center of the facility. In each case, the window or door served as natural ventilation, and concentration measurements of outdoor samples were made at each air exit point. The results showed that in all printing facilities, the levels of VOCs and carbonyl compounds were much higher in printer equipment compared to indoor levels. Comparative examination of VOCs between printer equipment and the indoors of the facility, the main species of master and offset printer equipment were Methyl isocyanide, 2,2,6-Trimethyloctane, 2,2-Dimethyldecane, 3,7-Dimethyldecane, Toluene, Acetonitrile, and 3- Methoxy-3-methylbutanol. The main species of the indoors of master and offset facilities were Toluene, 2,2,6- Trimethyl-octane, Isopropyl alcohol, 3-Methoxy–3- methylbutanol, Nonane, and Acetone. However, in the screen printing facility, the printer and indoor emission compounds were the same such as 2-Methyl-cyclopentanone, Cyclohexanone, Ethylbenzene, and p-Xylene. Among the compounds released to the outside, Toluene and Acetone were the most abundant species of VOCs and carbonyl compounds, respectively.

본 연구는 중소기업의 임원보수, 기업성과, 국제화에 대한 소유구조의 역할을 고찰한다. 소유와 경영의 엄격한 분리를 상정한 기존 문헌과 달리 소유와 경영이 중첩되는 임원의 주식소유에 주목한다. 임원 소유지분을 지배주주 소유지분과 분리․취급함으로써 임원보수, 기업성과, 국제화에 미치는 소유지분의 순효과를 임원과 지배주주의 몫으로 분해하여 측정할 수 있다. 이에 2014~2018년 기간 비금융산업에 속하는 국내 상장 중소기업의 공시정보를 활용하여 소유지분 및 임원보수가 기업성과와 국제화에 각각 어떠한 효과를 가져오는지를 주로 분석하였다. 주요 분석 결과는 다음과 같다: (1) 임원보수는 기업성과와 국제화에 직접 영향을 미치는 요인이며, (2) 임원 지분소유는 임 원보수와 양의 상관관계를 통해 간접 경로로 기업성과와 국제화에 영향을 주고 있으나, (3) 지배주주 지분소유은 기업성과 및 국제화에 직․간접 관계가 있다고 판단하기 어렵다. 이 결과를 통해 소 유와 경영의 일치가 기업성과와 국제화에 직․간접적으로 중요한 요소라는 점을 확인할 수 있다.

본 연구에서는 선박 전원용 연료전지 시스템 모델을 개발하여 순수한 산소를 공급하여 진행한 실험 결과의 비교를 통하여 연료전지 시스템 모델을 검증하였다. 검증된 모델을 활용하여 공기 압축기를 사용하여 공기를 공급할 경우에 대하여 산소를 공급한 경우와의 연료전지 출력 특성을 비교 검토하였다. 또한, 연료전지 시스템의 열물성치 변화가 스택의 출력에 어떠한 영향을 미치는지에 관하여 검토하였다. 그 결과 본 연구의 실험 범위에서 캐소드 공급 가스로 순수한 산소를 공급한 경우의 모델링을 통한 계산 결과와 실험 결과는 전 부하 영역에서 거의 동일한 전압 및 출력을 얻을 수 있었다. 560 A의 일정한 부하에서 캐소드 공급용 산소를 대신하여 공기를 공급한 경우 각각의 스택 전압은 약 14 V, 스택 출력은 약 8 kW, 스택 효율은 약 3 % 및 전체 시스템 효율은 8 % 정도 낮아짐을 알 수 있었다. 본 연구에서 검토한 열물성치 중에서 스택에 대한 냉각수의 열전달 계수가 스택의 출력에 가장 큰 영향을 미침을 알 수 있었다.

소형선박 기관실 내 화재 시 개구부 유동 및 온도에 대해 FDS(Fire Dynamics Simulator)를 이용하여 화재시뮬레이션을 수행하였다. 열방출률이 10 kW 급인 경유(Diesel) 화재를 대상으로 하였고, 천장 통풍통의 위치, 측면 개구부 유·무 및 크기에 대한 영향을 파악하였다. 측면 개구부의 유·무 및 크기는 연기 거동 뿐 아니라 개구부를 통한 질량 유량 및 온도에 지대한 영향을 미쳤다. 측면 개구부가 미설치되거나 크기가 작은 경우 연기층이 기관실 내 바닥까지 도달하였고, 측면 개구부의 크기가 증가함에 따라 개구부를 통한 질량 유량이 증가하고 온도는 감소하는 경향이 나타났다. 반면, 천장 통풍통의 위치가 연기 거동, 개구부를 통한 질량 유량 및 온도에 미치는 영향은 측면 개구부 크기에 비해 상대적으로 미미한 것으로 관찰되었다. 따라서 소형선박의 기관실 내 화재 시 안전성 향상을 위해서는 천장 통풍통 위치보다 측면 개구부의 크기가 더 중요한 설계 인자인 것으로 판단된다.

이 연구의 주된 목적은 중소도시 내부 인구이동의 패턴을 주택 시장의 특성과 연관 지어 분석하는 것이다. 전국 시･군 단위의 인구이동을 살펴본 결과 지역 중심지에 해당하는 도시들은 시･군의 경계를 넘지 않는 내부이동 비중이 상대적으로 높게 나타나고 있다. 이 도시들은 아파트 비율이 높을 뿐만 아니라 인구이동 사유에서 주택 요인이 차지하는 비중이 높은 특징을 가지고 있다. 내부이동의 비중이 높은 강릉시를 사례 지역으로 하여 내부이동의 공간 패턴을 주택 시장에 초점을 두어 분석하였다. 주요 결과는 다음과 같다. 첫째, 강릉시는 2014년 이후 신축 아파트 공급이 크게 늘어나면서 인구의 내부이동 비중이 더 높아졌는데, 이 과정에서 아파트 공급이 집중된 곳은 높은 양의 순이동을 기록한 반면 기존의 인구중심지는 큰 음의 순이동을 나타냈다. 둘째, 내부이동에 대한 OD 분석 결과 아파트 공급지로의 지배적 흐름이 강릉시 전역에서 광범위하게 나타났으며, 그 하위에는 인구 유출이 많았던 기존 중심지로 유입되는 소규모의 흐름이 관찰되었다. 셋째, 주택가격과 내부이동 간의 연관성을 살펴보면 전출지에 비해 주택가격이 더 비싼 곳으로 이동하는 경향이 훨씬 강하게 나타났다. 이 연구는 거의 주목받지 못한 중소도시 내부이동을 다루고 있을 뿐만 아니라 그 특성이 수도권 혹은 대도시에서의 이동과는 이질적일 수 있음을 밝히고 있다는 점에서 시사하는 바가 크다.

The culture of the intestinal epithelium into three dimensional (3D) structures typically termed organoid culture. Organoid culture is based on the ability of intestinal stem cells (ISCs), at the base of the crypt, perpetually to divide and produce a fully differentiated, polarized epithelium. Leucine-rich-repeat-containing G-protein-coupled receptor 5 (Lgr5) positive ISCs isolated from the intestine can form organoids in long-term culture. Thus, when cultured under the appropriate 3D conditions, single Lgr5+ ISCs undergo cycles of self-renewal, differentiation and morphogenesis, and self-organize into crypt-villus domains that house cycling ISCs and differentiated intestinal epithelial cells (IECs). In this study, we performed isolation, characterization and consecutive subculture of small intestinal crypts from BALB/c-nude mouse. Briefly, isolated mouse crypts were embedded in matrigel, cast into 40 μL droplets at the bottom of well in a 48-well plate. Following polymerization, the gels were overlaid with ISCs expansion medium containing B27, N2, N-acetylcysteine, epidermal growth factor, noggin, and R-spondin 1. As a result, mouse crypt-derived ISCs had enteroids and spheroid morphologies. We also confirmed by quantitative real-time RT-PCR that expression of ISCs-related specific genes (Lgr5, sox9) and IECs-related specific genes (chromogranin A, defensin-5, mucin-1, mucin-2, and villin) was maintained at eight passages or more. Thus, we observed that expression of specific markers and consecutive self-renewing in the mouse small intestinal crypt-derived organoids.

The purpose of this study was to established the manufacturing process technology of an ultra-thin, multi-functional micro-implant(MFMI) that was optimized in fractured small animals, not mainly large animals. The test results showed a reckon type plate was more suitable than a straight plate because of excellent deformation energy. It was found that the structure of the hole and the screw could be fastened in all directions with the limited contact design of the threaded part cut off in 4 directions. It was possible to manufacture a reckon type plate reflecting the neck part of 2.0 mm width. It was confirmed that the plate hole could be stably and easily deformed and fastened without damaging the hole through the round type bending device.

In recent years, studies on various 3D scanner applications, including those on quality control and reverse engineering, have been conducted in the shipbuilding industry. Appropriate scanner selection, scanning environment setting by targets, and data postprocessing are essential for effective 3D scanning projects for small crafts. In this study, a non-contact handheld-type 3D scanner was used for molds and hull products for the 10– 30-ft class of small crafts. Small crafts have fewer geometric features and several glare surfaces; thus, anti-glare and texture feature addition preprocessing is critical. The 3D scanning results are used for geometry quality control of single panels and curved surfaces in craft hulls. Consequently, international rule-based weight estimation calculation sheets have been developed and applied for product weight quality control.

The purpose of this study was to determine whether there are differences in the verbal interactions of earth science gifted depending on their communications structures and group status in small group activities. To this end, a small group activity was conducted to measure the density of the earth, and 8 small groups were selected, including 4 coownership type and 4 monopolistics type groups with different communication structures. And then, the framework was developed for analyzing verbal interactions to compare the differences in characteristics between small groups. The results are as follows. First, regardless of the communication structures, there were showing a simple pingpong-type communication structures for all small groups. Second, negative interactions such as ‘restraint’, ‘command’, ‘complaint’, and ‘lack of confidence’ predominantly appeared in all small groups. Third, the students in the status of out-lookers in small groups were mainly verbal interactions, such as instructing the other person, acting against the other person’s actions, and expressing dissatisfaction with the attitudes and abilities of members. Therefore, teachers should guide students to use higher-level verbal interactions in their group activities in small group activities, and engage in students communication to prevent negative interactions from occurring. The teachers also need to check the level of achievement for students in the status of out-lookers in advance and guide them to participate more actively in small group activities. This study is meaningful in that it can be sued to design teaching and learning to improve students’ problem solving and communication skills.