본 논문에서는 문턱치 기반의 영상처리 알고리즘을 이용한 인셀(in-shell)헤이즐럿과 셀드(shelled)헤이즐럿의 분류 방법을 제안한다. 헤이즐럿은 외피가 있는 인셀 형태, 내피만 있는 셀드 형태, 내피도 제거된 블랜치드 (blanched)형태, 그리고 모든 껍질을 제거한 후 알맹이를 볶아 판매하는 로스티드(roasted)형태로 제품화 된다. 그러나 생산, 이송과 가공 과정에서 외피가 쉽게 박피되기 때문에 각 단계별로 제품을 판매하기 위해서는 일차적으로 인셀 헤이즐럿과 셀드 헤이즐럿을 구별하여 제품화하는 것이 필요하다. 따라서 본 논문에서는 각 단계의 헤이즐럿 표면에 대한 영상처리 기반 분석을 바탕으로 18개의 문턱치 기반의 선별인자를 얻고 이를 바탕으로 실시간 선별이 가능한, 인셀 및 셀드 헤이즐럿의 분류 알고리즘을 제안한다. 제안한 방법을 선별에 적용한 결과 인셀 헤이즐럿의 선별 정확 도는 98%이며 나머지 셀드 헤이즐럿의 선별 정확도는 94%를 보였다.

Self-assembled monolayers(SAM) of microspheres such as silica and polystyrene(PS) beads have found widespread application in photonic crystals, sensors, and lithographic masks or templates. From a practical viewpoint, setting up a highthroughput process to form a SAM over large areas in a controllable manner is a key challenging issue. Various methods have been suggested including drop casting, spin coating, Langmuir Blodgett, and convective self-assembly(CSA) techniques. Among these, the CSA method has recently attracted attention due to its potential scalability to an automated high-throughput process. By controlling various parameters, this process can be precisely tuned to achieve well-ordered arrays of microspheres. In this study, using a restricted meniscus CSA method, we systematically investigate the effect of the processing parameters on the formation of large area self-assembled monolayers of PS beads. A way to provide hydrophilicity, a prerequisite for a CSA, to the surface of a hydrophobic photoresist layer, is presented in order to apply the SAM of the PS beads as a mask for photonic nanojet lithography.

This study aims to examine factors affecting the seafood processing business of primary cooperatives. For this purpose, I divided primary cooperatives that participate to seafood processing business into three group by sales scale. And then analyzed survey results for the four items that might be affecting the seafood processing business, type of seafood processing methods, HACCP certification status, distribution channels, processing difficulties during project implementation, etc. The result offers four implications. First, It is desirable to reduce the burden of the initial investment by leveraging the consignment process at the initial entry to seafood processing business. Second, HACCP certification is essential factor in order to promote seafood processing business as a long-term economic business. Third, To the steady growth of the seafood processing business, it is important to secure fixed large customers, as well as a individual customer. Fourth, For the continued growth of the seafood processing business it should be approached differently by way of sales, when the National Federation of Fisheries Cooperatives support to primary cooperatives.

본 연구는 4일간 절식을 통해 배변을 하지 않고 먹이 급이 에 따른 흰점박이꽃무지 유충의 일반성분, 지방, 아미노산 등 을 분석하였다. 먹이 급이에 따른 체중감소는 호박, 알로에 쌀 겨, 절식 순으로 각각 0, 2.8, 15, 27% 나타났다. 조단백질 함 량은 50.7 ~ 55.4%, 지방함량의 분포는 16.1 ~ 18.5% 쌀겨 급 이 한 것이 가장 높게 나타났다. 전체 지방산 함량 중 불포화 지방산은 75.5 ~ 76.4%로 나타났으며, 알로에 급이가 76.4%로 가장 높게 나타났다. 구성아미노산 조성에서 필수아미노산의 36%, 비필수아미노산이 34%로 나타났다. 총 polyphenol 함량 은 쌀겨, 알로에, 호박, 절식 순으로 각각 23.57, 23.38, 23.05, 22.70 mg g−1으로 나타났다. ABTS DPPH radical 소거활성은 쌀겨를 급이한 흰점박이꽃무지 유충에서 각각 17.94 mgTE g−1, 2.00 mgTE g−1 가장 높게 나타났다. 흰점박이꽃무지 유충 명 도를 나타내는 L 값은 호박을 급이한 것이 72.3로 알로에를 급이한 것이 64.7, 쌀겨를 급이한 것이 58.3, 급이를 하지 않 은 것은 44.3으로 호박을 급이한 것이 가장 밝게 나타났으며, 급이를 하지 않은 것이 가장 어둡게 나타났다.

최근 국내 의류 시장에서 SPA 브랜드의 급격한 성장을 기반으로 관련 업체들이 기존 의류 이외에 다른 종류의 다양한 제품(SPA 브랜드 확장)을 출시하는 추세이다. 이와 같은 추세 이면의 심리적 기제를 알아보기 위해서 본 연구는 SPA 브랜드 확장에 대한 소비자 정보 처리 과정을 개념적으로 (1) SPA 브랜드 확장과 원 SPA 브랜드 간의 유사성 지각과 (2) 평가(태도와 구입의향)로 구분하였다. 이후 가상의 3종류 SPA 브랜드 확장(저, 중, 고 유사성 조건)에 대한 소비자의 유사성 지각 과정과 평가를 각각 아이트래커와 자기 보고식 설문지를 이용해 측정하였다. 통계 분석 결과, SPA 브랜드 확장의 유사성 지각 과정에서 외적 정보 탐색량과 정보 처리 수준은 ‘중>저>고 유사성 조건’ 순으로 차이를 보였다. 또한 SPA 브랜드 확장에 대한 태도와 구입의향은 ‘고=중>저 유사성 조건’ 순으로 높은 것으로 나타났다. 이와 같은 결과는 SPA 브랜드 확장에 대한 평가가 유사성 지각 정도와 유사성 지각 과정에서 투입된 인지적 노력량에 영향을 받는다는 점을 제안한다.

Using reverse micelle processing, ZnAl2O4 nanopowders were synthesized from a mixed precursor(consisting of Zn(NO3)2 and Al(NO3)3). The ZnAl2O4 was prepared by mixing the aqueous solution at a molar ratio of Zn : Al = 1 : 2. The average size and distribution of the synthesized powders with heat treatment at 600 oC for 2 h were in the range of 10-20 nm and narrow, respectively. The average size of the synthesized powders increased with increasing water to surfactant molar ratio. The XRD diffraction patterns show that the phase of ZnAl2O4 was spinel(JCPDS No. 05-0669). The synthesized and calcined powders were characterized using a thermogravimetric - differential scanning calorimeter(TG-DSC), X-ray diffraction analysis (XRD), and high resolution transmission electron microscopy(HRTEM). The effects of the synthesis parameter, such as the molar ratio of water to surfactant, are discussed.

Effects of dynamic high-pressure (DHP) treatments with and without integration with heating on microbial stability, vitamin C concentration, color, sugar content, and pH of orange juice were studied and compared with those of the conventional thermal treatment. Freshly squeezed orange juice was heated at 90oC for 1 min or DHP-treated at 205 MPa and 20, 50, 60, or 70oC. The DHP treatment at 20oC without heating and the treatment at 50oC inactivated indigenous mesophilic aerobic microorganisms in orange juice by 4.2 and >7 log CFU/mL, respectively. The DHPtreated juice exhibited brighter color and higher vitamin C concentration and sugar content than the thermally treated juice, regardless of integration with heating. The DHP-treated juice demonstrated brighter color and higher sugar contents than untreated juice and thermally treated juice during storage at 4oC for 63 days. The results have demonstrated the potential of applying DHP treatments to pasteurize orange juice with increasing brightness and sugar content of the juice.

Perfluorinated sulfonic acid (PFSA) ionomers have been widely used as representative polymer electrolyte membrane materials for fuel cells and water/salined water electrolyses. The PFSA ionomers membranes need to satisfy complicated transport behaviors to small molecules including gases and ionic species. That is, the PFSA ionomers membranes have to transport protons as fast as possible, while the membranes should act as hydrogen barriers, since the permeated gas induces thermal degradation of cathode catalyst resulting in rapid reduction in fuel cell performances. In this study, it is disclosed that these permeation behaviors can be easily tunable by controlling membrane processing histories even though the ionomers have the same chemical architecture and equivalent weight.

MAO ceramic coatings were prepared on AZ61 magnesium alloy for various processing times ranging from 5 to 60 min, in an electrolyte solution based on silicate-fluoride. The mechanical, electrochemical and, microstructural properties and the phase compositions of the coating layers were investigated. In this work, unlike previous studies, coatings with high amounts of the Mag2SiO4 phase were formed which contained small amounts of MgO and MgF2 at a processing condition of 30 min. A microstructural analysis revealed that the porosity of the coatings was reduced considerably with an increase in the processing time, together with a change in the pore geometry from an irregular to a spherical shape. Potentiodynamic polarization and mechanical testing results showed that the coatings acquired after a processing time of 30 min were superior to all of the others.

Analyzing asphalt mixture images can provide crucial information not only for generating advanced geometry structure in several numerical computations (i.e. FEM and/or DEM) codes, but also for numerically evaluating the material microstructure. It is well known that 3D X-Ray Computer Tomography (CT) can provide accurate and realistic microstructure information of asphalt mixtures; however, this technology still presents two limitations: 1) the equipment is very expensive and, therefore, only few pavement agencies can afford it, and 2) the software required to generate realistic image of asphalt mixture with three-phase structure (aggregate, asphalt binder and air-voids) is based on a global thresholding algorithm which cannot be easily accessed and edited by users and practitioners. In this paper, accurate and realistic 2D three-phase asphalt mixture images were generated using an advanced DIP analysis code (implemented on MATLABTM) and a common flatbed scanner, which can be easily purchased at relatively low price. The threshold algorithm was developed based on the computed results of Gmm (maximum specific gravity), Gmb (bulk specific gravity), VMA (voids in mineral aggregates) of given asphalt mixtures which can be experimentally obtained in a laboratory environment. 2D three-phase images of asphalt mixtures were derived from grey scale images (color intensity from 0 to 255) obtained from original RGB (Red-Green-Blue) scale images with a dual-threshold computation techniques (i.e. one step for computing air voids phase, T1, and a second step for computing asphalt binder (and/or mastic) phase, T2). An example of DIP analysis results is shown in Figure 1. Based on the computation results, quite accurate and good visual agreement was observed between RGB scale image and DIP analyzed image. The findings indicate that this advanced DIP analysis technique can provide reliable geometry and microstructural information for several numerical simulations such as finite element method (FEM) and discrete element modeling (DEM). This research work represents a solid base for performing simple 2D microstructure analysis using 2- and 3-point correlation function and for developing the Moon Cannone Falchetto (MCF) model which will be introduced in the next annual KSRE conference.