사장교 케이블의 손상은 사장교 전체의 안전에 가장 큰 영향을 주는 요인이 되므로 케이블의 손상에 대한 유지관리를 필수적으로 해야한다. 이러한 유지관리의 대표적인 방법으로 케이블의 고유진동수변화을 추적하는 방법이 있다. 지금까지 케이블의 고유진동수는 진동법에 의해 횡방향 진동으로 추정하여 왔으며 시스템인식기법은 반복법에 의한 민감도방정식으로 축방향강성을 추정하나 새그의 영향으로 종방향운동에 대한 고유진동수의 분포에 대한 연구가 필요하다. 이 연구에서는 종방향운동에 의한 고유진동수를 이용하여 손상을 추정함으로써, 종방향운동의 신뢰성을 향상시키는 새로운 방법을 제안하였다. 이 방법의 적용결과를 근사해인 유한요소해석결과와 비교하여 유사한 결과를 얻음으로써 제안된 방법의 신뢰성을 검증하였다. 따라서, 케이블손상과 고유진동수와의 관계를 분석한 결과는 손상률이 증가할수록 고유진동수는 낮게 나타났다. 따라서 케이블의 실측 고유진동수를 알 때 케이블손상과 고유진동수와의 관계식을 통해 케이블의 손상정도를 추정할 수 있으므로 케이블의 효율적인 유지관리가 가능하게 된다.

This study investigates the effectiveness of a wall fiber element in predicting the flexural nonlinear response of reinforced concrete shear walls. Model results are compared with experimental results for reinforced concrete shear walls with barbell-shaped cross sections. The analytical model is calibrated and the test measurements are processed to allow for a direct comparison of the predicted and measured lateral force and displacement responses. Response results are compared at top displacements on the walls. Results obtained in the analytical model for barbell-shaped wall cross sections compared favorably with experimentally responses for flexural capacity, stiffness, and deformability.

This large diameter cable NDE technique was based on the direct current (DC) magnetization technique and a search coil-based magnetic flux measurement. A total flux sensor head was fabricated that was consisted by a magnetization part to magnetize the specimen and a sensing part to measure the total magnetic flux. The magnetization part was consisted by an electro-magnet yoke that fabricated by winding a coil. The magnetic field for magnetizing the main cable was generated by applying the low frequency DC voltage to the winded coil. The sensing part was configured by two semi-circular search coils, and it measures the electromotive force that pass through the search coil by using the faraday’s law of induction. Total flux was calculated by integrating the measured magnetic flux. Then, B-H curve was extracted using the total flux, and cross-sectional loss can be detected using variation of features from the B-H curve.

This large diameter cable NDE technique was based on the direct current (DC) magnetization technique and a search coil-based magnetic flux measurement. A total flux sensor head was fabricated that was consisted by a magnetization part to magnetize the specimen and a sensing part to measure the total magnetic flux. The magnetization part was consisted by an electro-magnet yoke that fabricated by winding a coil. The magnetic field for magnetizing the main cable was generated by applying the low frequency DC voltage to the winded coil. The sensing part was configured by two semi-circular search coils, and it measures the electromotive force that pass through the search coil by using the faraday’s law of induction. Total flux was calculated by integrating the measured magnetic flux. Then, B-H curve was extracted using the total flux, and cross-sectional loss can be detected using variation of features from the B-H curve.

철근콘크리트 구조물의 전단거동은 수년간의 많은 연구에도 불구하고, 이론적으로 명확하게 규명하기에 어려운 문제중에 하나이다. 중공슬래브의 휨강도와 전단강도는 중공부로 인하여 감소되기 때문에, 이에 따른 구조물의 성능을 예측하는 것은 중요한 문제라 할 수 있다.현재 각국의 중공슬래브 전단설계기준은 실험에 의한 기준식을 제시하고 있다. 따라서 본 연구에서는 철근비에 따른 일방향 중공슬래브 전단강도 산정방법에 관한 연구를 수행하기 위해 실험결과를 분석하고, 전단강도 산정식들을 비교, 분석하였다.

본 연구에서는 기존의 원형단면 CFT 기둥-기초부 연결부의 문제점을 분석하고 이를 개선하기 위한 구조상세를 제안하였다. 앵커를 이용한 구조물의 연결은 원형단면을 가진 CFT 기둥의 경우 하부에 베이스플레이트를 설치하게 된다. 기초부 설계시 앵커의 연결성능을 향상시키기 위하여 앵커프레임을 설치하게 되는데 이는 설계시 구조물의 구조상세가 복잡해지게 되며 시공 규모 또한 증가하게 된다. 또한 상부의 하중이 커짐에 따라 연결부의 앵커배치가 2열,3열로 증가하여 기초부와 콘크리트의 연결상세가 복잡해지고 경제적인 설계의 어려움이 있다. 이러한 기초부의 과도한 설계를 개선하기 위하여 새로운 구조상세에 대한 연구가 필요하다. 앵커연결을 지지하는 앵커프레임에 대한 구조상세를 개선하기 위하여 기존에 사용된 앵커대신 고장력 볼트를 사용하여 연결성능을 향상시켰으며 앵커프레임의 생략을 유도한 구조상세를 제안하였다. 이러한 연결상세의 합리적인 검토를 위하여 기존의 설계법과 고장력 볼트를 이용한 시험체를 각각 제작하였고 실험을 통하여 거동특성을 분석하였다. 고장력 볼트의 적용성을 확인하여 CFT 기둥-기초부의 연결성능을 향상시키기 위한 다양한 구조상세를 제안하였다. 고장력 볼트의 전단연결재 설치, 내부보강형식에 따른 구조상세 등 총 4가지의 설계변수를 기준으로 하여 시험체를 제작하였으며 탄성영역에서의 변형률 분포특성과 하중-변위관계를 통한 이력거동특성에 대한 검토를 수행하였다. 또한, 실험결과의 분석을 통하여 기둥부와 연결부의 강도평가를 실시하여 연결구조에 대한 개선된 구조상세를 제안하였다. 개선된 구조상세를 기준으로 유한요소해석을 실시하고, 이에 대한 타당성 검증 및 설계변수를 설정하여 이론에 의한 강도평가를 실시하고 개선된 구조상세에 대한 영향을 검토하였다.

Usually, columns are the key load bearing elements in concrete frame structures. They are typically weak, not to long distance explosive loadings, but to short distance loadings. In this study, the effect of blast loadings occurring within a short distance was examined analytically. Various aspect ratios of column sections with the same sectional area and reinforcement ratio were considered as variables in order to evaluate damage levels. It was found that ratio of residual strength to nominal axial strength of columns decreased as contact area of column to the blast loading became smaller.

The corrosion is a main cause of degradation damage in the steel bridges. The evaluation whether the repair or reconstruction would be need or not for the corroded steel member, is based on cross section and quantity of corroded portion. It is considered reasonable that the evaluation will be base on the endurance of the corroded member. In this study, the bending endurance of the I-shaped steel girder with the local corrosion on the lower flange is discussed by using elastic-plastic finite element analyses. That simple way of estimating it is also proposed.

Experiments were divided into two parts; one part is to understand the basic properties of high flowable VA/VeoVa-modified cement mortar with different polymer cement ratio (P/C) and the weight ratio of fine aggregate to cement (C:F) and the other part is to investigate the effect of surface water spread on the concrete substrate on adhesion in tension. To understand the basic performance, the specimens were prepared with proportionally mixing VA/VeoVa redispersible powder, ordinary portland cement, silica sand, superplasticizer and viscosity enhancing agent. Here, P/C were 10, 20, 30, 50 and 75% and C:F were 1:1 and 1:3. As the change of P/C and C:F unit weight, flow test, crack resistance and adhesion in tension were measured. Three specimens with good adhesion properties were selected among specimens with different P/C and C:F. The effect of surface water evenly sprayed on concrete substrate on adhesive strength is investigated. The results show that surface water on concrete substrate increases the adhesion in tension of high flowable VA/VeoVa-modified cement mortar and additionally improves the flowability compared to the non-sprayed case.

Prestressed concrete (PSC) members are readly available in civil engineering applications due to the convenience of construction and easy of quality control in the manufacturing process of the member. Especially, half-depth precast concrete composite slab, which is one of the PSC flexural members is developed recently using the long-line method. The half-depth precast concrete composite slabs are composed of the precast concrete and the in-situ concrete placed at the site. In this paper, we present the results of experimental investigations pertaining to the pretensioning efficiency and the flexural behavior of half-depth precast concrete composite slab which is made of precast PSC manufactured by the long-line method. In the long-line method, the pretensioned precast member is manufactured simultaneously, by tensioning tendons at once. In addition, we suggest the equation that can estimate the flexural strength of half-depth precast concrete composite slab reasonably by considering the effects of rebar embedded in the precast PSC flexural member.

For the optimized design of the wind turbine tower, demonstrate the superiority of ability to resist the lateral load on the ICH-CFT, i.e. ability to resist the moment, compared to Steel Tubular Type that is mainly used in the existing, by using P-M Diagram

This study presents a theoretical solution of elastic critical buckling load of infinitely long pipelines with non-uniform thickness under external pressure. The solution is derived with an assumption that a cylindrical shell under external pressure can be considered as a simple ring. The eigenfunctions are derived to obtain the critical buckling load for a ring structure with two thickness-reduced regeions. The finite element analysis is performed to verify the theoretical solutions.

The existing evaluation method of flexural strength of the hollow slab considering only compressive zone above the hollow part is conservatively evaluated. In this study, the practical compressive zone of the hollow slab are considered to evaluate its flexural performance according to neutral axis location

In this study, we developed section list table for horizontally overlapped structural members of new traditional Korean-style houses. Wood grade, roof load, member length etc were considered as design variables. We expect that the developed section list table can help architectural designer of new traditional Korean-style house in their early design stage

Complete closed-type carbon fiber reinforced polymer stirrups with a rectangular section (CFRPRS) were developed and tested in this research. The CFRPRS was intended to relieve stress concentration and to reduce the number of kinked fibers at the bent portion. A total of 16 B.5 specimens were tested regarding the bend strength of the CFRPRS and CFRP stirrups with circular section. Test results showed that CFRPRS improved the bend strength compared to its counterpart of conventional CFRP stirrups having a circular section, with the larger ratio of width to thickness being more effective for the same sectional area. The best correlation between the test results and predictions on CFRPRS bend strength was observed when the section of CFRPRS was modeled as a collection of transformed individual circular sections.

Due to special chemical environment, sulfuric acid can be produced in sewerage system. This sulphuric acid may react with hardened cement paste and originate expansive products which can induce swelling and disaggregation of concrete. Therefore, the aim of this paper is to study the strength and acid resistance properties of cementless restorative mortar

The construction of underground rail crossing is effect on railroad infra-structure and rail safety. So various methods have been suggested to construct through the infra-structure on the railroad. This paper treats the results of studies for safety of temporary bridge using a commercial FEM program, RM which is operated based on data measured on a sites. Also it was carried out optimal section considering characteristic of dynamic which reflects actual load for speed cases.

Steel cables are frequently used for various infrastructures. Especially the steel cables in long span bridges are critical members Damage at cable members can occur in the form of cross sectional loss caused by corrosion and fracture. Therefore, NDE of steel cable is needed to measure the cross-sectional damage. In this study, Total Magnetic Flux sensor system was applied to monitor the condition of cables. This system measures total magnetic flux to detect the loss of metallic cross section area(LMA) of steel cable. To verify the feasibility of this study, 2 types of steel bar were fabricated and their output values measured by the search coil in total flux sensor.

본 연구에서는 고유동성의 SBR 개질 시멘트 모르타르의 기초적 성능을 바탕으로 콘크리트의 보수용 재료에 매우 중요한 요구성능인 부착강도에 대한 피착체의 표면에 존재하는 표면수량의 영향을 검토하는 연구가 수행하였다. 고유동성 SBR 개질 시멘트 모르타르의 기초적인 성능을 토대로 부착강도, 잔갈림성, 재료분리 저항성이 좋은 시험체를 선택하였다. 시험체는 C:F=1:1인 경우 P/C=20%, 30%의 시험체 2개, C:F=1:3인 경우 P/C=50%의 시험체 1개, 총 3개가 선택되었으며 이 3개의 배합에 대하여 피착체의 표면수량에 따른 고유동성 SBR 개질 시멘트 모르타르의 특성을 파악하였다. 표면수는 콘크리트 피착면의 단위 면적 (cm2) 당 각각 0, 0.006, 0.012, 0.017, 0.024 g이 균등하게 살포되었으며, 이에 따른 연도변화, 플로우값, 부착강도, 부착파괴형상, 내균열성 및 재료분리여부를 파악하였다. 본 연구를 통해 콘크리트 피착체에 살포된 표면수는 고유동성 SBR 개질 시멘트 모르타르의 부착강도를 증진하는 효과가 있다는 결론을 얻었다.

강바닥판의 구조상세에 대하여 많은 연구가 이루어지고 있으나, 대부분의 연구가 표준형의 U-rib를 대상으로 실시되었을 뿐, 강바닥판 건설초기의 개단면리브형식에 대한 연구는 미진한 것으로 조사되었다. 본 연구에서는 공용연수 31년된 개단면세로리브형식의 강바닥판 교량의 피로균열 발생 원인을 조사하기 위하여 실교통류하에서의 계측 데이터를 통하여 대상구조상세의 거동 특성을 분석하였다. 또한 상세구조해석을 통하여 대상교량을 통과하는 대표트럭하중을 추정하고, 상세영향면해석을 이용하여 대상구조상세의 응력 및 변형특성을 분석하였다. 이들 분석에 기초하여 피로균열이 발생된 대상구조상세의 보강방안을 제시하고, 이에 대한 타당성을 검증하였다. 연구결과, 개단면리브에서의 피로균열의 발생원인은 개단면부에서의 전단변형에 의한 응력증가 및 차량의 이동에 따른 교번응력의 발생에 기인하는 것으로 조사되었으며, 국부구조상세에 대한 피로설계에서는 구조상세의 거동특성이 충분히 반영된 상세해석에 근거한 설계를 실시하는 것이 중요하다는 것을 알 수 있었다.