Thin-film shape technology is recognized for its core technology to enhance the technology of LCD, PDP, semiconductor manufacturing processes, hard disks and optical disks, and is widely used to form coated thin films of products. In addition, resistance (electron beam filament) technology for heating is used to manufacture filament for ion implants used in semiconductor manufacturing processes. By establishing an electronic beam filament production system and developing seven specifications of electronic beam filament, it is contributing to improving trade dynamics and increasing exports to Japan through localized media of theoretical imports to domestic companies. In this study, CAE analysis was performed after setting electron beam filament specification and development objectives, facilities and fabrication for electron beam filament production, electron beam filament JIG & fixture design and fabrication followed by electron beam filament prototype. Then, the automation and complete inspection equipment of the previously developed electronic beam filament manufacturing facilities was developed and researched to mass-produce them, to analyze and modify prototypes, design and manufacture automation facilities, and finally, to design and manufacture the complete inspection equipment. In this paper, analysis and modification of prototypes of electron beam filaments for mass production were dealted with.

Thin-film shape technology is recognized for its core technology to enhance the technology of LCD, PDP, semiconductor manufacturing processes, hard disks and optical disks, and is widely used to form coated thin films of products. In addition, resistance (electron beam filament) technology for heating is used to manufacture filament for ion implants used in semiconductor manufacturing processes. By establishing an electronic beam filament production system and developing seven specifications of electronic beam filament, it is contributing to improving trade dynamics and increasing exports to Japan through localized media of theoretical imports to domestic companies. In this study, CAE analysis was performed after setting electron beam filament specification and development objectives, facilities and fabrication for electron beam filament production, electron beam filament JIG & fixture design and fabrication followed by electron beam filament prototype. Then, the automation and complete inspection equipment of the previously developed electronic beam filament manufacturing facilities was developed and researched to mass-produce them, to analyze and modify prototypes, design and manufacture automation facilities, and finally, to design and manufacture the complete inspection equipment. In this paper, design and manufacture of electronic beam filament automation facilities for mass production were dealted with.

The column-tree type steel beam-column connections are commonly used in East Asian countries, including Korea. The welding detail between the stub beam and column is similar to the WUF-W connection; thus, it can be expected to have sufficient seismic performance. However, previous experimental studies indicate that premature slip occurs at the friction joints between the stub and link beams. In this study, for the accurate seismic performance evaluation of column-tree type moment connections, a moment-slip model was proposed by investigating the previous test results. As a result, it was found that the initial slip occurred at about 25% of the design slip moment strength, and the amount of slip was about 0.15%. Also, by comparing the analysis results from models with and without the slip element, the influence of slip on the performance of overall beam-column connections was examined. As the panel zone became weaker, the contribution of slip on overall deformation became greater, and the shear demand for the panel zone was reduced.

Thin-film shape technology is recognized for its core technology to enhance the technology of LCD, PDP, semiconductor manufacturing processes, hard disks and optical disks, and is widely used to form coated thin films of products. In addition, resistance (electron beam filament) technology for heating is used to manufacture filament for ion implants used in semiconductor manufacturing processes. By establishing an electronic beam filament production system and developing seven specifications of electronic beam filament, it is contributing to improving trade dynamics and increasing exports to Japan through localized media of theoretical imports to domestic companies. In this study, CAE analysis was performed after setting electron beam filament specification and development objectives, facilities and fabrication for electron beam filament production, electron beam filament JIG & fixture design and fabrication followed by electron beam filament prototype. Then, the automation and complete inspection equipment of the previously developed electronic beam filament manufacturing facilities was developed and researched to mass-produce them, to analyze and modify prototypes, design and manufacture automation facilities, and finally, to design and manufacture the complete inspection equipment. In this paper, mainly design and manufacturing of facilities for making electron beam filament were dealted with.

Ion-beam irradiation(IB) on HfO2 surface induced high-performance liquidcrystal(LC) driving at a 1-V threshold with vertical alignment of liquid crystals(LC). The high-k materials Atomic layer deposition was used to obtain LC orientation on ultra thin and high-quality films of HfO2 layers. To analyze surface morphological transition of HfO2 which can act as physic alignment effect of LC, atomic force micro scopy images are employed with various IB intensities. The contact angle was measured to elucidate the mechanism of vertical alignment of LC on HfO2 with IB irradiation. Contact angle measurements show the surface energy changes via IB intensity increasing.

Thin-film shape technology is recognized for its core technology to enhance the technology of LCD, PDP, semiconductor manufacturing processes, hard disks and optical disks, and is widely used to form coated thin films of products. In addition, resistance (electron beam filament) technology for heating is used to manufacture filament for ion implants used in semiconductor manufacturing processes. By establishing an electronic beam filament production system and developing seven specifications of electronic beam filament, it is contributing to improving trade dynamics and increasing exports to Japan through localized media of theoretical imports to domestic companies. In this study, CAE analysis was performed after setting electron beam filament specification and development objectives, facilities and fabrication for electron beam filament production, electron beam filament JIG & fixture design and fabrication followed by electron beam filament prototype. Then, the automation and complete inspection equipment of the previously developed electronic beam filament manufacturing facilities was developed and researched to mass-produce them, to analyze and modify prototypes, design and manufacture automation facilities, and finally, to design and manufacture the complete inspection equipment. In this paper, mainly jig & fixture design, production and trial production of electron beam filament were dealted with.

Thin-film shape technology is recognized for its core technology to enhance the technology of LCD, PDP, semiconductor manufacturing processes, hard disks and optical disks, and is widely used to form coated thin films of products. In addition, resistance(electron beam filament) technology for heating is used to manufacture filament for ion implants used in semiconductor manufacturing processes. By establishing an electronic beam filament production system and developing seven specifications of electronic beam filament, it is contributing to improving trade dynamics and increasing exports to Japan through localized media of theoretical imports to domestic companies. In this study, CAE analysis was performed after setting electron beam filament specification and development objectives, facilities and fabrication for electron beam filament production, electron beam filament JIG & fixture design and fabrication followed by electron beam filament prototype. Then, the automation and complete inspection equipment of the previously developed electronic beam filament manufacturing facilities was developed and researched to mass-produce them, to analyze and modify prototypes, design and manufacture automation facilities, and finally, to design and manufacture the complete inspection equipment. In this paper, mainly electron beam filament specification analysis and development objectives and CAE analysis were dealted with.

이 논문에서는 이동하는 질량체의 연직 방향에 대한 관성 효과를 고려하여 보의 진동을 해석할 수 있는 유한요소해석 방법을 제안 한다. 제안하는 방법은 정밀한 상호작용 해석을 요하지 않는 경우에 계산의 효율성을 높이는 방법으로서, 이동하는 질량체의 관성 효 과를 운동방정식에 연계시키고 질량체와 보의 상호작용력은 외부 하중으로만 고려한다. 범용 유한요소해석 소프트웨어인 Abaqus를 이용하여 시간 영역 해석을 수행하고 보의 절점과 이동하는 강체 질량의 절점 변위를 다지점 구속조건으로 연계하여 해석하는 방법 을 제시하였다. 기존 해석적 방법에 의한 해와 비교하여 제안하는 방법을 검증하고 보행하중 모델을 이용한 이동 보행 하중해석에서 보행자의 질량 효과를 살펴보기 위한 간단한 연속 보 모델에 대한 해석 결과를 제시하였다.

이 연구는 다방향성 바잘트 섬유 시트로 보강한 철근콘크리트 보의 보강방법에 따른 전단거동을 실험을 통해 확인하 였다. 실험변수는 보강방법(무보강, 45도 90도 U형)과 보강겹수(0, 1 2겹)를 변수로 두었으며 전단강도실험결과 바잘트섬유시트 를 90도로 1겹 보강하였을 때 최대 11% 이상의 보강성능을 확인하였다. 또한, 유효변형률을 검토한 결과 섬유양이 증가함에 따 라 유효변형률이 감소함을 확인하였다.

A typical low and medium-sized neighborhood living facility in reinforced concrete building secures a high floor and pursues an efficient module plan(long span). Accordingly, research on the development of new hybrid beams that can innovatively reduce labor costs such as on-site installation and assembly while securing strength and rigidity is ongoing. In order to verify the structural performance of the U-flanged truss composite beam with newly developed shape, Experiments with various variables are required. Based on the results, this study is to evaluate the strength of U-flanged truss hybrid beam through the flexural strength of the Korea Design Code and experimental values. It was evaluated that nominal flexural strength was 110% to 135% higher than the experimental value.

The effect of the laser beam diameter on the microstructure and hardness of 17-4 PH stainless steel manufactured via the directed energy deposition process is investigated. The pore size and area fraction are much lower using a laser beam diameter of 1.0 mm compared with those observed using a laser beam diameter of 1.8 mm. Additionally, using a relatively larger beam diameter results in pores in the form of incomplete melting. Martensite and retained austenite are observed under both conditions. A smaller width of the weld track and overlapping area are observed in the sample fabricated with a 1.0 mm beam diameter. This difference appears to be mainly caused by the energy density based on the variation in the beam diameter. The sample prepared with a beam diameter of 1.0 mm had a higher hardness near the substrate than that prepared with a 1.8 mm beam diameter, which may be influenced by the degree of melt mixing between the 17-4 PH metal powder and carbon steel substrate.

부분구조화 기법은 자유도가 많고 복잡한 구조물의 유한요소 해석 모델 단순화에 효율적으로 적용될 수 있는 기법이다. 대표적으 로 선형 문제에 대해서는 Craig-Bampton method 등이 있다. Craig-Bampton method는 경계 요소를 제외한 나머지 요소의 불필요한 자 유도를 제거함으로써 선형 구조물의 축소를 수행한다. 최근에는 부분구조화 기법과 더불어 구조물의 최적설계를 위해 멀티레벨 최적 화 기법이 많이 활용되고 있다. 시스템의 목표를 달성하기 위해 각 부구조에 새로운 목표를 할당하는 기법이다. 본 연구에서는 유전자 알고리즘을 이용하여 시스템 목표 달성을 위한 각 부구조별 내부 자유도 개수를 새로운 목표로 할당하고 최적화를 수행하였다. 최적 화 절차로부터 도출된 부구조별 내부 자유도 개수를 이용하여 시스템의 축소를 수행하였다. 다양한 수치예제들을 통해 축소 모델에 대한 결과를 확인하였으며, 90% 이상의 정확도를 가지는 것을 확인하였다.

Abstract In this study, micro-defects on/in carbon fibers were modified by irradiation with an electron beam, which improved the mechanical strength of single carbon fibers. The electron beam irradiation was 10 kGy (using a 1.5 MeV accelerator in the air). The total doses ranged from 100 to 500 kGy. The tensile strength of the single carbon fiber was measured using a universal testing machine. The micro-defects on the fiber surface were observed with scanning electron microscopy and atomic force microscopy, and those in the fiber were evaluated by Raman spectroscopy. In conclusion, the electron beam treatment produced changes in the micro-defects on/in the carbon fibers, resulting in up to 14% improvement in the tensile strength of single carbon fiber.

Polyacrylonitrile (PAN)-based carbon fibers (CFs) and their composites, CF-reinforced plastics, have garnered significant interest as promising structural materials owing to their excellent properties and lightweight. Therefore, various processing technologies for fabricating these advanced materials using thermal energy have been intensively investigated and developed. In most cases, these thermal energy-based processes (heat treatment) are energy and time consuming due to the inefficient energy transfer from the source to materials. Meanwhile, advanced processing technologies that directly transfer energy to materials, such as radiation processing, have been developed and applied in several industrial sectors since the 1960s. Herein, general aspects of radiation processing and several key parameters for electron-beam (e-beam) processing are introduced, followed by a review of our previous studies pertaining to the preparation of low-cost CFs using specific and textile-grade PAN fibers and improvements in the mechanical and thermal properties of CF-reinforced thermoplastics afforded by e-beam irradiation. Radiation processing using e-beam irradiation is anticipated to be a promising method for fabricating advanced carbon materials and their composites.

본 논문에서는 전이보 시스템이 지닌 층고 및 공사물량 증가의 단점을 보완할 수 있는 경계보-벽체 시스템의 압축성능을 평가하였 다. 1/2 축소실험체에 대한 압축실험을 수행하고 그 결과를 3차원 비선형 유한요소해석 결과와 비교 및 분석하였다. 실험체 변수로 상 하부벽체의 수평길이 상대비, 하부벽체의 두께, 하부벽체 전단보강근의 상세를 고려하였다. 실험의 최대하중은 하부벽체의 공칭축강 도와 유사하게 나타났으며, 이로부터 상부벽체로부터의 수직 하중이 하부벽체로 원활하게 전달되며, 편심으로 인한 모멘트 중 상당 량을 경계보가 가져감을 알 수 있다. 상하부벽체 수평길이의 상대비가 40%일 경우 50%일 때보다 단면의 기여도가 증가하였으며, 하 부벽체에 면외방향 편심이 존재할 경우 단면의 기여도가 감소하였다. 하부벽체의 전단보강근 간격을 줄이고 크로스 타이를 배근할 경우 초기강성 및 최대하중이 증가하며 국부적인 응력집중이 감소하였다.

본 논문은 FRP 그리드로 보강된 콘크리트 보의 휨 성능을 예측하기 위한 해석적 연구결과를 제시한다. FRP 그리드 로 보강된 콘크리트 보의 휨 성능 예측을 위해 상용구조해석 프로그램인 LS-DYNA를 이용하여 유한요소해석이 수행되었다. 유 한요소해석 시 콘크리트와 FRP 그리드 간의 본드-슬립을 고려하였으며, 콘크리트와 FRP 그리드의 구속조건은 BEAM_IN_SOLID 모델이 적용되었다. 이후, 국내 여러 연구자들에 의해 수행된 실험 결과의 재현해석을 통해 제안된 유한요소해석 모델의 정확성 이 검증되었다. 최대하중, 최대하중 시의 변위 실험값에 대한 해석값의 비는 각각 0.990, 0.924, 표준편차 각각 0.056, 0.087로 제 안된 해석모델은 FRP 그리드로 보강된 콘크리트 보의 휨 성능을 잘 예측할 수 있는 것으로 나타났다. 제안된 유한해석모델을 이용하여 콘크리트 보의 인장재로 철근이 아닌 CFRP그리드를 적용하기 위한 매개변수해석이 수행되었으며, 콘크리트 압축강도, FRP그리드의 겹 수, FRP그리드의 유효깊이는 CFRP그리드로 보강된 콘크리트 부재의 휨성능에 중요한 인자임을 확인하였다.

Post-slaughtering storage of pork meat is important to improve the flavor and texture profile. Although irradiation of meat improves the keeping qualities of red meat, less work was done on the effect of quality in irradiated pork leg meat during post-slaughtering storage. Therefore, this study was done to compare low dosages of single beam irradiation treated pork leg meat on eating quality parameters over the nontreated meat stored at different storage temperatures. Freshly slaughter pig carcasses were brought to the irradiation unit for treatment. Pork leg meat was treated at 2 kGy with single beam. Treated (2 kGy) and non-treated pork leg meat were kept in three different temperatures as 2, 10 and 25°C for 1, 3 and 5 days and analyzed for cooking loss, shear force, color and nitrogenous flavor compounds. Cooking loss in day 5 in irradiated pork leg (30.29) was significantly lower than the control (33.27) (p<0.05). Shear force of treated (1.93) and non-treated (1.29) pork leg meat after day 5 had significant difference (p<0.05). “L*” and “b*” values of pork leg meat had significant difference at day 5 compared non treated leg meat (p<0.05) whereas the “a*” value was increased with storage time and temperature. Hypoxanthine level was significantly lower in pork leg meat at day 5 in treated (16.07) and non-treated (24.59) meats at 25°C (p<0.05) whereas the changes in AMP, IMP and Inosine was not significantly difference (p>0.05). As conclusion, post-slaughtering storage and irradiation with single beam of 2 kGy could ensure the meat quality of leg pork at even higher storage temperatures, with cooking loss, tenderness, flavor and the color which will be benefited in the processing industry.