The air dilution olfactory method to measure complex odors needs to store and carry odor samples from the field sampling until the analysis in laboratories. Until the analysis of sample in the laboratory, odor dilution factor (odor sensitivity) in the sample bag may decrease over time depending on the characteristics of each odor substances. This is one of the limitation for the air dilution olfactory method. Thus, the air dilution device enable to measure without loss in complex odors of samples. Recently, many studies on the performance test of on-site air dilution devices, i.e., field olfactometer, has been conducted to figure out the feasibility of the field olfactometers. In this study, seven odor samples were collected from five odor emission source sites. And comparative analysis with the air dilution olfactory method was carried out to assess the field applicability of the olfactometer. As results, the performance of the field olfactometer used in this study is regared as the affordable method. The dilution factors from between two methods showed the similar values, indicating low values of standard deviations. In order to ensure the accuracy and precision of measurement data using the field olfactometer, methodology minimized variables (that may affect measurement) needs to establish.

최근 우리는 Hg2+에 대한 높은 선택성을 가지며 Hg2+와 결합하여 밝은 녹색 형광을 보이는 tetraphenylethylene-bis(thiophen-2-ylmethyl)amine (TPE-BTA)의 착화합물(TPE-BTA-2Hg2+)의 구조를 밝혀내기 위해 시 간 의존적(time-dependent, TD) 밀도 함수 이론(DFT)을 이용하였다. 그러나 우리는 이 과정 속에서 Hg2+ 이온에 대한 모든 전자(all electron, AE) basis set인 x2c-TZVPPall만이 실험 스펙트럼에 가까운 흡수 및 형광 스펙트럼을 성공적으 로 재현한다는 것을 발견했다. 많이 알려져 있는 effective core potential (ECP) 기반인 LANL2DZ는 형광스펙트럼 계산 과 관련된 들뜬 상태의 구조 최적화 계산을 모두 실패했으며 또한, LANL2DZ는 첫 번째 들뜬 상태의 최적화 과정에서 너무 작은 형광 에너지를 제공했다. 이때 LANL2DZ는 리간드와 Hg2+ 사이의 거리가 증가함에 따라 빠르게 감소하는 HOMO-LUMO gap을 제공하는 반면, x2c-TZVPPall은 점진적으로 감소하는 안정적인 HOMO-LUMO gap을 보여줬다. 우리는 적어도 Hg2+ 이온을 포함하는 착화합물 시스템에서 ECP에서 발생하는 기하학적 문제들을 피하기 위해서는 모 든 전자 기본 세트를 사용하거나 새로운 ECP를 만들어야 된다고 조심스럽게 제안한다.

There are many types of foam molding methods. The most commonly used methods are the pressure foaming method, in which foam resin is mixed with a foaming agent at high temperature and high pressure, and the normal pressure foaming method, which foams at high temperature without pressure. The polymer resins used for foaming have different viscosities. For foaming under normal pressure, they need to be designed and analyzed for optimal foaming conditions, to obtain resins with low melt-viscosity or a narrow optimal viscosity range. This study investigated how changes in viscosity, molding temperature, and cross-link foaming conditions affected the characteristics of the molded foam, prepared by blending rubber polymer with biodegradable resin. The morphologies of cross sections and the cell structures of the normal pressure foam were investigated by SEM analysis. Properties were also studied according to cross-link/foaming conditions and torque. Also, the correlation between foaming characteristics was studied by analyzing tensile strength and elongation, which are mechanical properties of foaming composites.

The spread of COVID-19 changes consumer preferences and behaviors greatly across the world. Extant literature has demonstrated that when there is a threat to disease, people stay away from those who do not seem healthy as they can be potentially infectious. Based on the previous literature, this research shows that individuals exposed to disease threat avoid products of which designs are high in visual complexity. When disease threat was present, individuals had lower purchase intention for products with complex designs. The perceived uncleanliness mediated the effect of visual complexity and disease threat on purchase intention. The findings provide a novel insight into the effect of disease salience on consumer perception of product design.

We used the measurement data derived from a proton transfer reaction time-offlight mass spectrometry (PTR-ToF-MS) to ascertain the source profile of volatile organic compounds (VOCs) from 4 major industrial classifications which showed the highest emissions from a total of 26 industrial classifications of A industrial complex. Methanol (MOH) was indicated as the highest VOC in the industrial classification of fabricated metal manufacture, and it was followed by dichloromethane (DM), ethanol (EN) and acetaldehyde (AAE). In the industrial classification of printing and recording media, the emission of ethylacetate (EA) and toluene (TOL) were the highest, and were followed by acetone (ACT), ethanol (EN) and acetic acid (AA). TOL, MOH, 2-butanol (MEK) and AAE were measured at high concentrations in the classification of rubber and plastic manufacture. In the classification of sewage, wastewater and manure treatment, TOL was the highest, and it was followed by MOH, H2S, and ethylbenzene (EBZ). In future studies, the source profiles for various industrial classifications which can provide scientific evidence must be completed, and then specified mitigation plans of VOCs for each industrial classification should be established.

최근 들어 반려동물을 키우는 가구 수가 증가하고 있다. 그로인해 진드기와 냄새에 대한 관심 또한 증가하고 있다. 본 연구는 제충국 추출물 (Tanacetum cinerariifolium), 수용성 피톤치드(water-soluble phytoncide)가 진드기 퇴치제로서 효과와 탈취 및 항균 효과가 있는지 알아보기 위하 여 연구를 진행하였다. 틱 클라이밍 테스트(Tick climbing test)에서 제충국 추출물(Tanacetum cinerariifolium) 23.33점, 수용성 피톤치드 22.00점 으로 높은 기피효과를 보였다. 복합추출물로서의 진드기 기피 효과를 확인하기 위해 위 실험에서 기피 효과가 확인된 제충국 추출물, 수용성 피톤치 드를 포함한 복합추출물(Sample이라 함.), 타사 제품(Control이라 함.)로 틱 클라이밍 테스트(Tick climbing test)를 진행하였다. 결과 Sample 13.00점, Control 26.67점으로 Sample이 높은 기피 효과를 나타내었다. 참진드기 실내 기피제 효력 시험법에서도 Sample이 88%, Control이 12%로 우수한 진드기 기피효과를 보인다는 것을 확인하였다. Sample을 가지고 탈취 시험을 진행한 결과 암모니아에서 98.3%, 트리메틸아민에서 99.5%의 탈취 효과를 보여주었으며, 항균시험에서 대장균, 황색포도상구균, 폐렴균 모두 99.9%의 항균 효과를 보여주었다. 본 연구결과를 종합해 볼 때 위 소재를 포함한 복합추출물은 추후 진드기 기피제와 탈취 및 항균에도 효과가 있는 소재로서의 활용 가치가 높다고 판단된다.

Kori Unit 1 was permanently shut down in 2017 and is preparing to be dismantled. Decommissioning nuclear power plants is expected to generate a lot of decommissioning waste. Therefore, a radioactive waste treatment complex will be built on the site to safely and effectively the process of decommissioning waste generated from the Kori Unit 1, and the details are specified in the decommissioning plan. Therefore, a safety assessment should be conducted according to the facility’s normal and abnormal operations to construct a radioactive waste treatment complex. Currently, a safety assessment for a radioactive waste treatment complex can be conducted by the Safety Assessment Framework (SAFRAN) Tool based on the Safety Assessment Driving Radioactive Waste Management Solutions (SADRWMS) methodology developed by the International Atomic Energy Agency (IAEA). The SAFRAN Tool can be calculated radiation dose and hazard quotient (HQ) for workers and the public under normal and abnormal conditions of the radioactive waste treatment complex. When evaluating the radiation dose for the public due to releasing radioactive materials into the air or discharging radioactive materials into liquids, the radiation dose is calculated using the amount discharged or released from the treatment complex, and the Pathway Dose Factors (PDFs) derived from the generic environmental model given in the IAEA Safety Reports Series No.19. PDFs, which reflect the specific site data rather than the generic environmental model data, should be calculated and evaluated when performing the safety evaluation of the radioactive waste treatment complex to be built on the Kori site. In addition, in the SAFRAN tool, there is an inconvenience in that it must be calculated separately by radionuclides to calculate the contribution of dose or HQ for each radionuclide. Therefore, in this study, a safety assessment tool for a radioactive waste treatment complex was developed using Visual Basic by supplementing the limitations of the SAFRAN tool. This tool was developed to allow users to choose whether to apply PDFs based on the IAEA SRS-19 based on the generic environmental model or PDFs calculated to reflect the specific site data. Furthermore, the tool considered all types of decommissioning wastes that may occur during the decommissioning of the Kori Unit 1 and the treatment process scheduled to be introduced. Therefore, this study is expected to be used as basic data when conducting the safety assessment of radioactive waste treatment complex scheduled to be introduced in Korea.

Surface environmental factors such as climate change can affect the safety of the disposal system by changing groundwater recharge or flow. Therefore, it is important to identify surface environmental factors and hydrogeological factors to evaluate long-term changes in hydrogeological environment of a disposal system. In particular, evapotranspiration is an important to be considered because it loses 70% of rainfall and has a great effect on groundwater recharge. Evapotranspiration can be estimated using simple or complex models based on meteorological data. Meteorological data from January 2010 to December 2022 were collected from 44 Automatic Synoptic Observation Systems (ASOS) of the Korea Meteorological Administration (KMA), which observe factors necessary for calculating evapotranspiration. For the estimation of evapotranspiration through simple models, temperature-based models (Blaney-Criddle method, modified Blaney-Criddle method, Hargreaves-Samani method) and radiation-based models (Simple Abtew method, Makkink method, Prietley-Taylor method, Turc method, Solar radiation-Maximum temperature method) were used. The calculation of evapotranspiration through the complex model used the Penman-Monteith method, which is used as a standard model in the USA, Japan, and FAO. By comparing the evapotranspiration calculated by complex and simple model, methods with small errors were identified each region. In addition, long-term climate change scenarios were applied to confirm changes in long-term evapotranspiration in South Korea. The results of this study will be used to find alternative models in the case of missing data in the Penman-Monteith model, which requires a lot of meteorological data, and can be used as basic data for calculating groundwater recharge that can affect the disposal system in the future.

Epoxy resin (EP) is a thermosetting resin with excellent properties, but its application is limited due to its high brittleness and poor flame retardancy. Therefore, to solve this problem, a dispersion system of imidazole-containing ionic liquid ([Dmim]Es) and graphene in epoxy resin is designed based on the π–π stacking effect between imidazole and graphite layers. The study on the thermal and flame-retardant properties of the composites show that the modified [Dmim]Es–graphene nanosheets improved the flame retardancy, smoke suppression and thermal stability of epoxy resin. With the addition of 5wt% [Dmim]Es and 1% Gra, the exothermic rate (HRR) and total exothermic (THR) of the composites decrease by 35% and 30.2% compared with the untreated epoxy cross-linking, respectively. The limiting oxygen index reaches 33.4%, the UL-94 test rating reaches V-0. The characterization of mechanical properties shows that the tensile properties and impact properties increased by 13% and 30%, respectively. Through SEM observation, the addition of [Dmim]Es improves the dispersion of graphene in the EP collective and changes the mechanical fracture behavior. The results show that ionic liquid [Dmim]Es-modified graphene nanosheets are well dispersed in the matrix, which not only improves the mechanical properties of epoxy resin (EP), but also has a synergistic effect on flame retardancy. This work provides novel flame-retardant and graphene dispersion methods that broaden the range of applications of epoxy resins.

Oral squamous cell carcinoma (OSCC), which accounts for approximately 90% of oral cancers, has a high rate of local recurrence and a poor prognosis despite improvements in treatment. Exosomes released from OSCC cells promote cell proliferation and metastasis. Although it is clear that the biogenesis of exosomes is mediated by the endosomal sorting complex required for transport (ESCRT) machinery, the gene expression pattern of ESCRT, depending on the cell type, remains elusive. The exosomal release from the human OSCC cell lines, HSC-3 and HSC-4, and their corresponding gefitinib-resistant sub-cell lines, HSC-3/GR and HSC-4/GR, was assessed by western blot and flow cytometry. The levels of ESCRT machinery proteins, including Hrs, Tsg101, and Alix, and whole-cell ubiquitination were evaluated by western blot. We observed that the basal level of exosomal release was higher in HSC-3/GR and HSC-4/GR cells than in HSC-3 and HSC-4 cells, respectively. Long-term gefitinib exposure of each cell line and its corresponding gefitinib-resistant sub-cell line differentially induced the expression of the ESCRT machinery. Furthermore, whole-cell ubiquitination and autophagic flux were shown to be increased in gefitinib-treated HSC-3 and HSC-4 cells. Our data indicate that the expression patterns of the ESCRT machinery genes are differentially regulated by the characteristics of cells, such as intracellular energy metabolism. Therefore, the expression patterns of the ESCRT machinery should be considered as a key factor to improve the treatment strategy for OSCC.

This study was carried out in order to provide suggestions with regard to optimal control methods for various odor emission facilities (162 companies and 26 industrial classifications) through comparative analysis of effective odor treatment technologies for each type of odor substance by literature reviews, based on measured 22 odor substance data for 162 samples taken from A city. The industrial classification of Pulp showed the highest odor quotient (7,589 as average value) and was followed by the industrial classifications of Wastewater, Woods, and Furniture, indicating average odor quotient values of 2,361, 1,396 and 1,392, respectively. Absorption using chlorine dioxide and sodium hydroxide can be an optimal treatment method to remove the odor substances of sulfide and aldehyde groups. Biofilers with microbial communities will be effective to remove odors caused by volatile organic compounds (VOCs) and an absorption method using sulfuric acid is proper for the removal of odor substances caused by nitrogens.

본 연구는 복합추출물(익모초, 어성초, 진피)의 생리활성을 측정하여 식·의약품, 화장품 등의 소재로서의 가능성을 확인하고자 하였다. 복합추출물은 열수 추출하였으며, 세포독성, 항산화, 항염증, MAPKs 등의 평가는 ELISA 및 western blot을 통해 확인하였다. 그 결과, 총 폴리페놀 함량은 35.53±0.48 ㎎ GAE/g, 플라보노이드 함량은 8.18±0.16 ㎎ QE/g으로 나타났으며, DPPH 와 ABTS radical 소거능은 농도 의존적으로 증가하였다. 대조군과 비교하여 세포독성은 400 ㎍/㎖ 농도까지 100% 이상의 생존율이 나타났으며, NO 및 염증성 사이토카인을 유의하게 감소시켰다. 또한, 복합추출 물은 MAPKs(ERK, JNK, p38) 단백질 발현을 유의하게 억제시켰다. 이러한 결과는 복합추출물이 산화 적 손상 및 염증에 사용될 수 있음을 나타낸다. 따라서 본 연구 결과는 식·의약품, 화장품용 복합소재의 의 기초자료로 활용될 수 있을 것이다.