최근 국제 유가의 상승으로 인한 선박 운용비를 절감하기 위하여 중소형 선박에서도 저질연료유의 사용이 검토되고 있는 추세이다. 이 연구에서는 현재 중소형 선박에서 연료유로 사용중인 경유와 중유MF380을 혼합하여 소형선박에 사용이 가능하도록 제조한 혼합연료유인 MF30 연료유에 대하여 그 물리 화학적 특성을 분석하고 정제처리 및 연료유첨가제 효과에 대해 알아보았다. 연구결과 두 가지 전처리 방식인 원심식청정기와 가열 및 균질 방식(M.C.H)의 효과는 다소 미약하였지만, 유동점과 인화점은 다소 낮아졌다. 연료유첨가제로 인한 개질 효과는 뚜렷이 나타나지 않았다.

A period study of the semi-detached eclipsing binary system W Delphini based on the extensive series of minimum timings covering more than a century(109 years) indicates a cyclic(O-C) variation of the system. This variation can be explained as due either to (1) stellar magnetic activity cycles of the cool subgiant G5 secondary component of the binary with a subsurface magnetic field equals to 3 kG, or (2) a long-term orbital period increases with a rate of 1.68 × 10-8 day/cycle caused by a mass transfer rate of 4.9 × 10-8M⊙yr-1 from the less to more massive component modulated by a light time effect due to a hypothetical third body with period of 53.4±1.06 years. The former explanation is more recommended than the later one since the obtained third body mass value(M3=1.58 M⊙) is quite large but it can not manifest itself observationally and also it cannot be a white dwarf. In the contrary, from the magnetic activity point of view, the obtained characteristics are in good consistent when applying Applegate(1992) mechanism. However, further precise photometric and CCD observations for minima timings with brightness determinations are needed to confirm the present solution.

Gudul has been used since it was invented, and will be used continuously. But recently, we used rarely. One of the this reason is unequally floor temperature in Gudle because the distribution of heating air is not constant. So flow field in Gudul must be known for uniform temperature in floor. Recently, many fluid engineer have been performed the numerical analysis for the understanding of thermal and flow field based on the development of CFD(Computational Fluid Dynamics). In this paper, to find out the variation of temporal temperature in floor of traditional Gudle, we have performed numerical analysis. Initial temperature in floor is 20 t:' after 880 seconds later, maximum temperature become 2i.Oi t:'. ihour later, maximum temperature in floor become 34.5 t:' because continuously increase from 880 seconds.

인공용승구조물 설치해역의 구조물에 의한 유동분포를 파악하기 위하여 ADCP(Acoustic Doppler Current Profiler)를 이용한 정선관측을 2006년 5월 4일(소조기) 및 5월 30일(대조기)에 실시하였다. 동서-남북(un-component) 유동성분의 분석결과, 조시에 따른 흐름이 전반적으로 남동류가 우세하게 나타났으며 구조물 주변역의 표층에서 수심 30~40m까지의 유동과 이심에서의 유동이 서로 다르게 나타났다. 연직유동성분(w-component)은 소조기시 구조물 주변해역과 서쪽역에서는 상승류의 흐름이 나타났고 남쪽역, 북쪽역 및 동쪽역에서는 하강류의 흐름이 나타났다. 대조기 W-W line의 낙조시에는 동쪽과 서쪽해역에서 상승류의 흐름이 나타났으며 구조물 중심 동쪽 부근에서 상승류의 흐름이 나타났고 구조물에서 멀어질수록 하강류의 흐름이 나타났다. 대조기시의 분포는 창조시 S-N line에서 상승류의 분포가 전반적으로 나타났다. 또한 구조물 구축 주번해역에서의 단위면적당 상승류의 유량은 대 소조기 창 낙조시에 하강류에 대한 유량보다 크게 나타났다. 소조기에는 창조시보다 낙조시에 더 강하였으며, 대조기에는 창조시가 낙조시보다 큰 유량을 나타내고 있다.

This study was carried out to evaluate the characteristics of volatile organic compounds (VOCs) and aldehydes emission as a function of airtight time in new apartment. Sampling was undertaken at 34 new apartments located in 4 different cities of Korea from February to November 2005. The measurement data were collected every one hour from 10 a.m. to 6 p.m. toward increasing airtight time in a day. The concentrations of VOCs and aldehydes were analysed by GC/MS and HPLC method, respectively. These methods showed good sensitivity, linearity, and repeatability. In this study, the most abundant compounds at new apartments appeared to be toluene, m,p-xylene, formaldehyde and acetone. Moreover, the concentration variations at a closed rooms progressively increased by airtight time of 5 hours. Airtight time of new apartment was a most important and affective factor which influenced concentration change.

본 연구는 도로포장 재료의 상대습도를 편리하고 신뢰성 있게 측정할 수 있는 방법을 파악하여 도로포장 재료의 수분변화 특성을 분석할 수 있는 가능성을 연구하기 위하여 수행되었다. 이를 위하여 먼저 대기의 습도를 여러 가지의 센서를 이용하여 측정한 후 비교 분석하여 센서의 정확성 및 측정치의 보정 방법에 대한 연구를 수행하였으며 신뢰성이 확인된 센서를 이용하여 시멘트 몰탈 시편의 초기 경화 과정 및 실외 상태에서의 습도를 측정하여 분석하였다. 또한 습도측정용 센서를 이용하여 도로포장 재료의 투수성을 분석할 수 있는 몇 가지 방법에 대한 기초 실험도 수행하여 습도 측정을 통해 재료의 투수 특성 분석 가능성도 시험하였다. 연구 결과 Hygrochron을 이용하여 도로포장 재료의 습도를 측정하는 것이 여러 측면에서 유리한 것으로 판단되었으며 이러한 센서를 장착하는 방법 및 측정값을 보정하는 방법을 파악하였다. 몰탈 시편은 시편의 습도가 대기 습도의 증가 또는 감소하는 추세에 따라 변화하기 보다는 대기 습도에 접근하는 방향으로 변화한다는 것을 알았으며, 시편의 표면과 내부에서의 습도변화에는 확연한 지연이 생기는 것도 발견하였다. 또한 습도 측정용 센서는 도로포장 재료의 투수성을 측정하기에도 매우 적합하며 습도 측정값을 이용하여 재료의 투수 속도를 예측할 수 있는 방법을 제시하였다.

The aging behavior of sintered Al composites with various ceramic contents was investigated. 2xxx series blended powder was used as the starting powder. Ceramic contents were 0wt.% and 5wt.%. The blended powders were compacted at 250MPa. The sintering process was performed at for 60min in a atmosphere. Each part was solution-treated at for 60min and aged at . The Rockwell hardness at the peak aging time increased with ceramic contents. However, the peak aging time at maximum hardness was reduced with increased ceramic contents.

Effect of phase transformation and grain-size variation of hot-pressed cobalt on its dry sliding wear was investigated. The sliding wear test was carried out against glass (83% SiO2) beads at 100N load using a pin-on-disk wear tester. Worn surfaces, cross sections, and wear debris were examined by an SEM. Phases of the specimen and wear debris were identified by an XRD. Thermal transformation of the cobalt from the hcp ε phase to the γ (fcc) phase during the wear was detected, which was deduced as the wear mechanism of the sintered cobalt.

Numerous studies have suggested that the traditional project management tools do not adequately support the coordination efforts required to successfully deliver projects. because they were not developed to control uncertainty which is one of the characteristic of construction project. In traditional construction process control, supervisor usually measures the quantity of production for the project schedule. Flow production has suggested that better productivity, like that labor and cost performance can be achieved by reducing work flows variability. This research has suggested that 1) the circular concept of productivity with work flows variation. 2) the indicators that quantitatively measure work flows variation using productivity data which is obtained from the document of construction field. 3) measurement of productivity-based work flows variation for analyzing correlation with variation of productivity and verifies.

대기-해양의 상호작용과 제주도 후면에서 발생하는 카르만소용돌이행렬의 상관관계를 수치실험을 통하여 분석하였다. 카르만 소용돌이는 한라산의 제한된 높이에서 형성되는 경향을 가지고 있다. 그리고 본 연구에서는 900 hPa고도에서 카르만 소용돌이가 뚜렷이 생성되었다. 카르만소용돌이행렬의 발생초기에는 하나의 소용돌이세포가 나타나고 시간이 경과함에 따라 소용돌이는 이류를 한다. 이때 작은 소용돌이로 분리되는 경향이 있다. 분리된 소용돌이의 강도와 지속시간은 해수면 온도 분포와 밀접한 관계를 가진다. 즉 약한 해수면의 온도경도는 카르만 소용돌이의 지속 시간을 길게 하며, 산 후면의 소용돌이도를 감소시킨다. 강한 해수면 온도경도는 혼합층과 대기하층 수증기량을 증가시키고, 강화된 하층대기 혼합은 산악에 의하여 형성되는 기계적 응력을 감소시키는 경향이 있다.

The alumina dispersion-strengthened (DS) C15715 Cu alloy fabricated by a powder metallurgy route was annealed at temperatures ranging from in the air and in vacuum. The effect of the annealing on microstructural stability and room-temperature mechanical properties of the alloy was investigated. The microstructure of the cold rolled OS alloy remained stable until the annealing at in the air and in vacuum. No recrystallization of original grains occurred, but the dislocation density decreased and newly formed subgrains were observed. The alloy annealed at in the air experienced recrystallization and grain growth took place, however annealing in vacuum at did not cause the microstructural change. The mechanical property of the alloy was changed slightly with the annealing if the microstructure remained stable. However, the strength of the specimen that was recrystallized decreased drastically.

본 연구는 직물구조인자인 위사밀도와 직물의 조직을 변화시켜 시직한 면직물을 이용하여 역학특성 및 태의 변화를 KES-FB System을 이용하여 측정하였다. 그 결과 위사밀도가 증가할수록 굽힘특성 및 전단특성이 증가하는 것으로 나타났고, 위사밀도의 변화에 따른 역학특성치 중 굽힘 및 전단특성의 값은 평직이 높게 나타났으며, 인장특성, 압축특성 그리고 표면특성의 값은 조직 및 밀도에 크게 영향을 받지 않는 것으로 나타났다. 한편, 위사밀도 변화에 따른 의복착용성능 중 WC/T, MMD/SMD를 제외한 B/W 및 2HG/G, 2HB/B, 2HB/W, W/T, 그리고 WC/W는 위사밀도에 영향을 받는 것으로 나타났다. 위사방향의 직축은 굽힘특성, 전단특성, 압축회복도(RC), 표면거칠기(SMD), 태와 의복착용성능에 높은 상관을 보이는 것으로 나타났다. 그리고 Tightness는 굽힘특성, 전단특성, 압축특성 그리고 표면 마찰계수와 높은 상관을 보였고, 기본태 및 T.H.V., 의복착용성능에도 높은 상관이 있는 것으로 나타났다.

We conducted a year-long survey in 2000 to examine seasonal fluctuations in the abundance of the demersal copepod Pseudodiaptomus sp., the dominant copepod in the Seomjin River estuary, where the spring tide strongly affects changes in salinity gradients.

We used nine decamer primers to generate DNA fragment sizes ranging from 100 bp to 1,600 bp from two bullhead (Pseudobagrus fulvidraco) populations of Dangjin in Korea. 376 fragments were identified in the cultured bullhead population, and 454 in the population of wild bullhead from Dangjin: 287 specific fragments (76.3%) in the cultured bullhead population and 207 (45.6%) in the wild bullhead population. On average, a decamer primer was used to generate 34.2 amplified products in a cultured bullhead. A RAPD primer was used to generate an average of 3.1 amplified bands per sample, ranging between 2.5 and 6.0 fragments in this population. Nine primers also generated 24 polymorphic fragments (24/376 fragment, 6.4%) in the cultured bullhead population, and 24 (24/454 fragments, 5.2%) in the wild bullhead population. The OPA-16 primer, notably, produced which 11 out of 11 bands (100%) were monomorphic in the wild bullhead population. 110 intra-population-specific fragments, with an average of 12.2 per primer, were observed in the cultured bullhead population. 99 fragments, with an average of 11.0 per primer, were identified in the wild bullhead. Especially, 55 inter-population-common fragments, with an average of 6.1 per primer, were observed in the two bullhead populations. The bandsharing value (BS value) of individuals within the wild bullhead population was substantially higher than was determined in the cultured bullhead population. The average bandsharing value was 0.596±0.010 within the cultured bullhead population,. and 0.657±0.010 within the wild bullhead population. The dendrogram obtained with the nine primers indicates two genetic clusters, designated cluster 1(CULTURED 01~CULTURED 11), and cluster 2(WILD 12~WILD 22). Ultimately, the longest genetic distance displaying significant molecular differences was determined to exist between individuals in the two bullhead populations, namely between individuals WILD no. 19 of the wild bullhead population and CULTURED no. 03 of the cultured bullhead population (genetic distance = 0.714). RAPD-PCR allowed us to detect the existence of population discrimination and genetic variation in Korean population of bullhead. This finding indicates that this method constitutes a suitable tool for DNA comparison, both within and between individuals, populations, species, and genera.