In this study, indoor air quality indices (IAQI-C and IAQI-E) were developed for child care centers and elderly care centers based on health effects, and compared to the air quality index (CAI) for outdoor atmosphere. In addition, composite indices that integrate individual indices for each pollutant were developed to quickly and conveniently recognize the current air quality. Among all data, 71.2% and 35.6% belonged to the grades 'Good' and 'Moderate' for child care centers and elderly care centers, respectively. This assessment is more stringent than the CAI's criteria.

본 연구에서는 보육시설 실내공기에서 분리된 식중독 균 주의 독소 유전자 분포와 항생제 내성을 분석하여 보육시설 실내공기에 의한 식중독 발생을 사전 예방하고 식중독 발생 시 적절한 치료를 위한 기초자료를 제공하고자 하였다. 어린이집 실내공기에서 분리된 Staphylococcus aureus 16주, Bacillus cereus 37주를 실험대상으로 하였다. S. aureus와 B. cereus 독소 유전자는 PCR 방법으로 검출하였다. 항생제 감수성 실험은 Clinical and Laboratory Standard Institute의 디스크 확산법에 따라 실험하였다. S. aureus 16 균주 중 11 균주(68.6%)에서 seg와 sei 독소 유전자가 검출되었다. B. cereus 37 균주 모두에서 nheA와 nheB 독소 유전자가 검출되었다. B. cereus 독소 유전자 패턴은 총 12개로 나타났으며 nheA-nheB-nheC 독소 유전 자가 가장 중요한 패턴으로 나타났다. S. aureus 16 균주의 항생제 감수성실험 결과 ampicillin과 penicillin 항생제 에 93.8%, 87.5% 내성을 나타내었으나 methicillin resistance Staphylococcus aureus와 vacomycin resistance Staphylococcus aureus는 검출되지 않았다. B. cereus 37 균주의 항생제 감수성 실험 결과 ampicillin과 penicillin 항생제에 100% 내성을 나타냈었다. 이러한 결과를 종합하여 볼 때 보육시 설 실내공기에 오염된 S. aureus와 B. cereus에 의한 식중독을 발생을 예방하기 위하여 주기적인 환기와 공기 질 관리가 필요한 것으로 판단되었다.

In this study, according to the staking method of the fire hose in the indoor hydrant system, the number of kinks when the fire hose is deployed was measured and analyzed to examine how the staking method of the fire hose affects the kink when the hose is deployed. The fire hose staking method was classified into three types: donut-type, accordion-type, and hose hanger-type, and the walking speed and number of kinks were measured by repeating the experiment 5 times for male and female students. The results of the study are as follows. (1) Among the three types of fire hose staking methods, the donut-type staking method had an average of 92 times for male students and 86 times for female students on average. (2) The accordion-type and hose hanger-type staking methods showed similar results with an average of one or two kinks for both male and female students. (3) Regardless of the staking method, it was found that in general, male students with high walking speed had more kinking than female students with slow walking speed.

본 연구는 멸종위기종 두점박이사슴벌레의 인공 증식을 위한 산란 특성을 구명하기 위해 수행되었다. 우화 후 3개월이 지난 두점박이사슴 벌레 성충은 암수 비율이 1: 1 일 때 3주 이상의 교미 기간이 필요하다. 실험 처리온도 16, 20, 24, 28, 및 32°C 중에서 산란전기간은 16℃에서 우화 후 109일로 가장 길었으며, 32°C에서 우화 후 평균 59.4일로 가장 짧았다. 산란수는 24°C에서 암컷 한마리당 평균 40.6개로 가장 많았다. 성충의 평균 수명은 16°C에서 수컷 208.8일, 암컷 263.9일로 가장 길었으며, 32°C에서 수컷 96.1일, 암컷 130.3일로 가장 짧았다. 산란 용기 크기에 따른 두점박이사슴벌레의 산란수는 용기가 클수록 많았다. 사육 시 산란목 설치가 산란수와 산란기간에 크게 영향을 미치지 않았다. 본 연구의 결과는 멸종위기종 두점박이사슴벌레의 복원과 대량 증식을 위한 기초 자료로써 활용될 수 있을 것이다.

The role of QR Code robots in smart logistics is great. Cognitive robots, such as logistics robots, were mostly used to adjust routes and search for peripheral sensors, cameras, and recognition signs attached to walls. However, recently, the ease of making QR Codes and the convenience of producing and attaching a lot of information within QR Codes have been raised, and many of these reasons have made QR Codes recognizable as visions and others. In addition, there have been cases in developed countries and Korea that control several of these robots at the same time and operate logistics factories smartly. This representative case is the KIVA robot in Amazon. KIVA robots are only operated inside Amazon, but information about them is not exposed to the outside world, so a variety of similar robots are developed and operated in several places around the world. They are applied in various fields such as education, medical, silver, military, parking, construction, marine, and agriculture, creating a variety of application robots. In this work, we are developing a robot that can recognize its current position, move and control in the directed direction through two-dimensional QR Codes with the same horizontal and vertical sides, and the error is to create a QR Code robot with accuracy to reach within 3mm. This paper focuses a study on the speculative navigation using auxiliary encoder during the development of QR Code-aware indoor mobility robots.

In order for records to be preserved for a long time without physical and chemical transformation, the preservation environment of the library is very important, and environmental problems must be improved through periodic investigation on the preservation environment. Against this background, this study derived fine dust (PM10) and ultrafine dust (PM2.5) concentration data for the libraries, hallways, and workrooms of the National Archives of Korea over two years. There was a difference in the concentration of fine dust and ultrafine dust among facilities, and there was a change in the concentration depending on the month. Both fine dust and ultrafine dust concentrations were present at less than 10 μg/m³ in the libraries. In the hallways, both fine and ultrafine dust concentrations were highest in July. In the workplaces, the monthly fluctuations in the concentration of fine dust and ultrafine dust were large. And the concentration of fine dust and ultrafine dust in the workplaces were higher than those in the library and hallways. Overall, the concentration of fine dust and ultra-fine dust was measured below the maintenance standards stipulated by the Indoor Air Quality Management Act of the Ministry of Environment of Korea in all the investigated facilities. The results of this study are expected to be used as fundamental information to manage the indoor air quality of the facilities of the National Archives.

Temperature, humidity, and fungal concentration were investigated during the period from May 2019 to August 2021 to obtain information on the indoor air quality in the facilities of the National Archive of Koea, located at Seongnam, Daejeon, and Busan, respectively. The temperature and humidity of the undisinfected libraries was properly maintained for the preservation of papepr records. The airborne fungal concentration differed among the libraries, changed according to the season, and increased especially between June and August. Similarily, the concentration of airborne fungi in the hallways adjacent to the libraries also fluctuated depending on the season and showed a tendency to rise in the months when the ourside temperature rose. In general, the concentration of airborne fungi in the hallways was somewhat higher than that of the libraries. Importantly, it was identified that the concentration of airborne fungi exceeded the recommended standard (500 CFU/m3) by the Ministry of Environment of Korea only in the workroom where the classification and condition inspection of undisinfected records imported from outside were performed. Investigation of airborne fungal concentration from May 2021 to August 2021 showed that the 24 undisinfected libraries in Seongnam, Daejeon, and Busan were all good at 100 CFU/m3 or less. The results of this study are expected to be used as basic data to manage the indoor environment of facilities in the National Archives.

This study was conducted to help manage total floating bacteria and fungi in the indoor air by studying the characteristics of total floating bacteria and fungi according to the indoor CO2 concentration of daycare centers. The sampling and analysis of samples was based on the indoor air quality process test method, and the result analysis was conducted using the SPSS statistical program to perform correlation and regression analysis. Correlation and regression results show that CO2 and total airborne bacteria showed positive relationships, but airborne mold did not show relevance. In addition, in order to identify factors affecting airborne mold, correlation analysis and regression analysis were performed regarding total airborne bacteria, PM10, PM2.5, HCHO, outdoor mold, I/O ratio, indoor temperature/ humidity, area per classroom and volume. The results showed that the factors affecting airborne mold were I/O ratio, outdoor airborne mold, and total airborne bacteria. Research results show that CO2 and total airborne bacteria can be reduced and controlled by natural ventilation, and in the case of airborne mold, mechanical forced ventilation such as hoods will be necessary due to the introduction of outdoor airborne mold. In addition, it is necessary to consider I/O ratio criteria in order to confirm effective indoor mold contamination, taking into account the effect of outdoor mold inflow.

In this paper, a survey on students’ perceptions of air pollution, particulate matter (PM) and indoor air quality (IAQ) in school classrooms was analyzed. A total of 174 students participated in the survey, where 127 and 47 participants were elementary school students and middle school students, respectively. The elementary school was located in a rural area of Korea, whereas the middle school was located in an urban area. The questionnaire of the survey was mainly composed of three parts: (1) students’ perceptions of air pollution, (2) students’ perceptions of IAQ in the classroom, and (3) students’ perceptions of how to improve IAQ in the classroom. Based on our study, the responses of the students for the given questionnaire showed an opposite tendency. The students in the rural area tended to have positive perceptions regarding IAQ in the classroom as well as air pollution, whereas the students in the urban area revealed negative perceptions for the same items. Our survey results can be used by school officials in order to maintain and improve IAQ in school classrooms based on the perceptions of the students.

In this study, the purpose of this study was to examine the effect of twisting in the preparation of waterproofing in the process of unfolded donut-type staking method fire hoses in indoor hydrant system. The central pull-out method caused more twisting than the rolling method, and there was no significant difference in the number of twists according to the pull-out method in the case of male and female students. It was found that the time it took to untwist and prepare waterproofing was much shorter for male students. The angle valve and hose are connected, and the time to untwist and prepare for waterproofing after withdrawing the fire hose with the hose and nozzle connected was shorter than the unconnected state. In the rolling method, when a hose connected with two 15 m fire hoses was used and the angle valve-hose was connected, but the hose-nozzle was not connected, the least kinking occurred. The time to untwist and prepare for waterproofing was also the shortest. As a result, in the withdrawal method of the donut-type loaded fire hose in the indoor hydrant system, it is a rolling method rather than a central withdrawal method. With the angle valve and hose connected, unfold the fire hose with the hose and nozzle connected, if a large number of people unwind the twisted hose, the time to prepare for waterproofing can be shortened.

National concerns about air pollution are growing. The importance of indoor air quality is emerging because people live in an indoor environment more than 90% of the day. In particular, the indoor air quality of schools needs to be managed as teenagers are vulnerable to environmental pollution. The government has designated the School Health Act in order to manage indoor air quality in schools. Air purifiers have been operated to improve indoor air quality in the classroom since 2018. In this study, we performed on-site evaluations in some classrooms, and then we proposed a plan for improving the air quality in the classroom. In this study, PM10, PM2.5, and CO2 in classrooms in Chungnam were measured to analyze the effect of air cleaner supply. A portable aerosol spectrometer (PAS, model 1.109, Grimm) and CO2 meter (TES 1370, TES) were used as measuring instruments. Schools A and B exceeded the recommended standards, while school C met the standards. The ratio of PM10, PM2.5 in classrooms A and B was 0.58 and 0.5, respectively. Correlation analysis was performed between indoor and outdoor pollutants to analyze the effects of particulate pollutants present in each classroom. First, the measured concentration of fine particles was classified according to/on the basis of factors that affect/influence the internal environment of the classroom. Then, fine dust concentrations measured at the same time as AQMS were classified with regard to the external factors. The gradients for each classroom were 1.57, 1.63, and 1.54, although there were differences in concentration, but they were relatively similar. It is necessary to develop and disseminate customized air purifiers considering the activity of the occupants of classrooms. It is important to consider the areas in which s tudents breathe when installing air purifiers in the classroom. In addition, follow-up management of air purifiers is an essential element. For efficient operation and management of indoor air quality, it is necessary to develop and disseminate standard manuals for air purifiers. It is proposed that an environmental manager should be deployed in schools to manage environmental issues. Standardization of air purifiers, management guidelines for standard manuals, and field support for environmental sheriffs should be established on a legal basis.

This study aimed to assess the pollution level in 13 crowded subway stations in an effort to understand the spatial and seasonal factors of Indoor Air Quality. The main measured items were particulate pollutants such as PM10 and PM2.5 and gaseous pollutants such as CO2, HCHO, Rn, TVOC, BTEX, and Styrene at concourses and platforms in the summer and winter periods. The influence of the draught created by the movement of the train was classified into lateral and island platforms, and the concentrations of PM by location (entrance, middle, and end) were statistically compared and analyzed. As a result, the concentrations of PM were confirmed high in the order of Platform > Concourse > Ambient air. In particular, in the case of platform PM10, the frequency exceeding the standard value (100 μg/m3) was 38.5% and the maximum concentration was 196.2 μg/m3. All gaseous pollutants were at lower levels than the standard, and the factors affecting CO2 and Rn were identified as the number of users and geological characteristics, respectively. The principal component analysis (PCA) demonstrated that PM was found to be a major indicator of the air quality management of subway stations. In particular, the concentrations at entrance and end areas in the lateral platform were about 1.4 times higher with regard to PM10 than in the middle area, and about 1.9 times higher with regard to PM2.5 due to the effect created by the draught produced by the movement of the train. Therefore, in order to manage PM in the platform area, a specialized management plan for places with particularly high PM concentration within the platform area is required. In addition, it is necessary to evaluate the effect created by the draught produced by train movement when selecting locations for measuring indoor air quality.