WCl6-EtAlCl2 촉매계를 이용하여 비교적 큰 분자량을 갖는 폴리(페닐아세틸렌)을 합성하였다. 중합반응이 잘 진행되었으며 중합수율은 81%였다. 합성한 폴리(페닐아세틸렌) 분자구조를 NMR(1H-,13C-), IR, UV-visible, 원소분석 등으로 분석한 결과 페닐 치환기를 갖는 공액구조 고분자가 합성되었음을 확인할 수 있었다. 아울러 332 nm의 빛으로 여기시킬 경우 PL 최대 peak는 424 nm에서 관찰되었는데, 이는 2.93 eV의 광 에너지에 해당한다. 이 고분자의 순환 전압전류 그림은 도핑과 탈도핑사이에서 비가역적인 전기화학적 거동을 보여주었다. 이 고분자의 전기화학적 과정이 매우 안정하였으며, 스캔속도에 따른 산화전류 밀도 실험으로부터 이 고분자의 산화-환언 과정은 확산-제어과정에 따르는 것으로 분석되었다.
A series of noble poly(amide-imide)s and copoly(amide-imide)s bearing 1,2-bis(4-phenoxy)benzene units were synthesized by the direct polycondensation of 1,2-bis(4-trimellitimidophenoxy)benzene[1,2-PTPB] with a combination of commercially available aromatic diamines and diacids such as m-phenylene diamine, p-phenylene diamine(PPD), isophthalic acid and terephthalic acid(TA) in N-methyl-2-pyrrolidone(NMP) using triphenyl phosphite and pyridine as a condensing agent in the presence of dehydrating agent (CaCl2). The resulting polymers had inherent viscosities in the range of 0.37~0.78 dL/g and most of them were soluble m common organic solvents including NMP, dimethylacetamide, dimethylsulfoxide, dimethylformamide, and m-cresol. Wide-angle X-ray diffractograms revealed that the copoly(amide-imide) derived from PPD with mixed acids of 1,2-BTPB and TA, showed crystalline nature, whereas all of the other polymers were found to be amorphous. The glass transition temperatures of the polymers occurred over the temperature range of 270~323℃ in their differential scanning calorimetry curves and their 10% weight loss temperature, determined by thermogravimetric analysis in air and nitrogen atmosphere, were in the range 465~535℃, 500~550℃, respectively, indicating their good thermal stability.
Solution copolymerization of Styrene(St.) with 2-Hydroxypropylacrylate(2-HPA) was carried out with Benzoylperoxide(BPO) as an initiator in toluene at 80℃ in a batch reactor. Reaction volume and reaction time were 0.3 liters, 8 hours respectively. The time to reach steady state was about the six time. The monomer reactivity ratios, r1(St.) and r2(2-HPA) were determined by both the Kelen-Tudos method and the Fineman-Ross method ; r1(St.)=0.376(0.330), r2(2-HPA)=0.408(0.778). The activation energy of thermal decomposition was in the range of 33~55kcal/mol.
Cinnamate를 곁사슬로 포함하는 감광성 고분자를 poly(2-hydroxyethyl methacrylate) (PHEMA)로부터 합성하였다. Cinnamate 기가 25에서 97mol%까지 치환된 감광성 고분자를 PHEMA와 cinnamoyl chloride의 반응을 통해 합성하였으며, 반응 조건에 따른 치환율의 변화를 조사하였다. 합성된 고분자는 H-NMR과 FT-IR을 이용하여 구조 확인하였으며, DSC와 TGA를 이용한 열분석을 행하였다. 얻어진 고분자의 광 반응성은 UV/VIS spectrophotometer를 이용하여 확인하였고, 편광 자외선 조사를 이용한 액정의 광배향 특성에 대해서 연구하였다.
폴리메틸펜텐 막(polymethylpentene membrane, PMP)을 Ar, NH3 플라즈마로 표면 처리하고, 처리 전후의 투과 도와 선택도의 변화를 관찰하였다. Ar 플라즈마로 처리하였을 때 O/C의 비율이 증가하며 친수성기 (OH, COOH, C=O)의 도입이 확인되었고 NH3 플라즈마로 처리하였을 때 아민, 아미노기가 도입되었다. 플라즈마 처리된 폴리메틸펜텐막에서 CO2의 투과도와 N2,에 대한 선택도 (Actual Separation Factor)의 최적조건은 Ar 플라즈마 처리 (30 W-6 min)의 경우 각각 182 Barrer [10-10;cm3(STP)cm/cm2.s.cmHg]와 6.17이며, NH3, 플라즈마 처리 (30 W-8 min)의 경우 각각 144 Barrer [10-10/cm2(STP)cm/cm2.s.cmHg] 와 6.13을 얻었다.
The biodegradable oil absorption resin was prepared by the suspension polymerization of the modified starch and 2-ethylhexyl acrylate (2-EHA). The highest oil-absorption capacity of B-PEHA prepared showed at the condition of the modified starch content of 10 g and ethyleneglycol dimethacrylate (EGDMA) of 0.133 wt%. Its maximum oil absorption capacity per g of oil absorber was chloroform 30.88 g, toluene 19.75 g, xylene 18.78 g, tetrahydofuran (THF) 15.96 g, octane 11.43 g, hexane 9.5 g diesel oil 12.80 g, and kerosene 13.79 g, respectively. The biodegradation of poly-2-ethylhexylacrylate (B-PEHA) determined by enzymatic hydrolysis showed approximately 17∼20%. The results showed that the preparation of the biodegradable oil absorption resin is available using the modified starch.