바퀴(Blattella germanica L.)를 chlorpyrifos와 permthrin 살충제로 누대도태하여 얻어진 저항성 바퀴를 대상으로 저항성 유발 및 교차저항성에 대해서 조사한 결과는 다음과 같다. chlorpyrifos와 permethrin으로 6세대 도태 한 결과 감수성 계통 보다 도태계통의 반수치사농도가 각각 3.23배, 2.10배 증가하였다. chlorpyrifos도태계통에 있어서 propoxur, fenvalerate 및 permethrin의 반수치사농도가 각각 2.97배, 3.89배 및 1.31배로써 fenvalerate 와 proposur가 permethrin보다 비교적 높은 교차저항성을 보였으며, permethrin 도태계통에 있어서 chorpyrifos, propoxur 및 fenvalerate의 반수치사농도가 각각 1.42배, 1.08배 및 5.23배로써 fenvalerate가 다른 살충제에 비하여 비교적 높은 교차저항성을 보였다.

The purpose of the present research is to develop an efficient numerical method for the calculation of potential flow and predict the wave-making resistance for the application to ship design of tuna purse seiner. The paper deals with the numerical calculation of potential flow around the series 60 with forward velocity by the new slender ship theory. This new slender ship theory is based on the asymptotic expression of the Kelvin-source, distributed over the small matrix at each transverse section so as to satisfy the approximate hull boundary condition due to the assumption of slender body. Some numerical results for series 60, C sub(b) =0.6, hull are presented in this paper. The wave pattern and wave resistance are computed at two Froude numbers, 0.267 and 0.304. These results are better than those of Michell's thin ship theory in comparison with measured results. However, it costs much time to compute not only wave resistance but also wave pattern over some range of Froude numbers. More improvements are strongly desired in the numerical procedure.

Pyrethroid계 살충제 fenvalerate를 공시하여 실내 감수성계통 배추좀나방(Plu tella xylostella L.)을 인위적으로 누대도태한 후 저항성 발달속도와 정도를 조사하고, 이 저항성계통의 타 살충제에 대한 교차저항성 유무와 정도를 검토하였다. 저항성 발달속도는 fenvalerate 24세대 도태계통에서 도태전에 비하여 66.2배 증가하였다. Fenvalerate 도태계통은 pyrethroid계 살충제인 deltamethrin에 145배의 고도의 교차저항성을 나타내었고, alphamethrin, cypermethrin, fenvalerate, permethrin, tetramethrin에 17.4 -45.0배의 교차저항성을 나타내었다. 유기인계 diazinon, dichlorvos, ethoprophos, EPN과 카바메이트계 BPMC, carbaryl, methorny I에서는 2.1-4.3배의 낮은 교차저항성을 나타내었다. 그러나, 유기인계의 acephate, fenitrothion과 카바메트계 carbofuran에 대해서 비교차저항성을 나타내었다.

점박이응애(Tetranychus urticae Koch)의 살비제저항성 기작을 구명하기 위한 기초시험으로서, 유기인계 carbophenothion과 ethion, 유기염소계 dicofol, 유기주석계 cyhexatin 및 합성 pyrethroid계 biphenthrin으로 누대도태한 각 저항성계통과 감수성계통을 공시하여, esterase isozyme의 영동대 차이점 (polyacrylamide gel electrophoresis)을 비교한 결과, carbophenothion 저항성계통은 감수성계통에서 나타나지 않은 Est. 1, Est. 3이 검출되었고, ethion과 cyhexatin 저항성계통에서는 각각 Est. 3이, dicofol 저항성계통에서는 Est. 1, Est. 3, Est. 7이, biphenthrin 저항성계통은 Est. 3, Est. 7이 검출되었다. 이러한 영동대와 기질분해량의 차이점으로 미루어 보아 공시살비제들의 저항성발달에는 esterase가 관여하는 것으로 나타났다.

정박이응애(Tetranychus urticae koch)의 감수성계통에 대하여 유기찬계 살충제인 carbophenothion, ethion과 유기소계인 dicofol, 유기주석계인 cyhexatin 및 합성 pyrethroid계인 biphenthrin등으로 단제루대도태를 실시하여 각 살충제의 저항성발달 차이와 약제상호간의 교우저항성의 유무 및 정도를 시험.조사하였다. carbophenothion과 ethion은 22세대와 24세대 도태에 서 각각 156배와 64.1배의 높은 저항성을 나타내었다. dicofol은 28세대 도태에서 39.7배로 biphenthrin은 24세대도태에서 13배로 화학적계통이나 동일계통내에서도 약종에 따라 저항성유발 정도에 차이가 있었다. Carbophenothion 도태계통은 도태에 관치하지 않은 ethion에 대하여 높은 수준의 교우저항성을 나타내었으나 dicofol과 biphenthrin에는 낮은 수준의 교우저항성을 나타내었고, ethion 도태계통은 carbophenothion에 대해서 고도의 교우저항성을 나타내었다. Dicofol이과 biphenthrin 도태계통들은 모두 carbophenothion과 ethion에 대해서 중도의 교우저항성을 보였으며, cyhexatin 도태계통은 ethion과 carbophenothion에 대하여 고도의 교우저항성을 나타내 었다.

Pyrethroid계 살충제인 cypermethrin과 carbamate계 살충제인 pirimicarb를 공시하여 실내 감수성계통 복숭아혹진닷물(Myzus persicae)을 인위적으로 루대도태한 후, 저항성 발달속도와 정도를 조사하고, 이들 저항성 계통의 타살충제에 대한 교차저항성 유무와 그 정도를 검토하였다. 저항성 발달속도는 cypermethrin 20세대 도태계통에서 도태전에 비하여 20.5차 증가하였으나, pirimicarb 20세대 도태계통에서는 3.2배 증가에 그쳐 살충제 종류에 따라 큰 차이를 보였다. Cypermethrin 도태계통은 acephate와 pirimicarb에 대해서 , pirimicarb 도태계통은 acephate와 cypermethrin에 대해서 교차저항성을 나타내었다. 그러나 cypermethrin, pirimicarb 도태계통은 demeton-S-methyl에 대해서 비교우저항성을 나타내었다.

벼멸구에 대한 벼품종의 저항성요인으로 주목되고 있는 선호성, 란 및 약충기간, 부화 및 우화률, 성비, 성충의 수명 및 산란력 등을 조사하였다. 식이 및 산란선호성은 동률벼에서 생태형 모두 높은 선호성을 보였으며, 청청벼와 밀양63호에서는 각각 생태형-2와 3에서 약간 높은 선호성을 보였으나, 동률벼에 비해서는 현저히 낮은 선호성이었다. 난 및 약충기간과 부화율, 우화률 및 생장 지수는 생태형-1의 경 우 타 품종에 比해 密陽 23號에 서 짧고, 높았으며 , 또態型-2와 3 은 各各 좁 팍벼 와 密陽 63號에 서 密陽 23號에서와 같이 짧고, 높게 나타났다. 성충의 수명과 산란수도 생태형-1의 경우 타 품종에 비해 밀양 23호에서 길고, 많았으며, 생태형-2와 3은 각각 청청벼와 밀양 6 63호에서 밀양 23호에서와 같이 수명이 길고 산란수도 많았다.

초 록 수도 흰빛마름병 이병엽과 Kresek 발병주로부터 분리한 I균군(각5균주), II균군(각4균주)의 18균주를 "밀양23호"및 "유신" 품종 5엽기의 전개엽에 침접종한후 수도체내에서의 균증식과 병반장율 및 Kresek 발병율을 비교조사하여 균주간차이를 비교하였고, 밀양23호외28품종에 대해 II, IV균군을 사용하여 침접종및 근단접종법으로 품종간 저항성을 조사한 결과 1. 각균주간 수도체내에서의 증식은 큰 차이를 볼수 없었으나 "Kresek"발병주로부터 분리된 균주가 병반장률이 약간 높은 경향을 나타내었다. 2. Kresek 발병은 흰빛잎마름병 이병주에서 분리한 균주와 "Kresek"발병주로부터 분리한 균주간에는 아무런차이를 인정할수 없었고, 모두 발병을 볼수있었다. 3. Kresek에 대한 품종저항성에서는 흰빛잎마름병의 저항성반응과 비슷한경향을 나타내고 있으나 Wase Aikoku 품종군에서도 발병을 볼수있었다. 4. 황옥품종군인 "IR20"은 Kresek에라해 고도의 저항성반응을 나타내었다. 5. 접종반응으로는 근단접종법에서 침접종법에 비해 더욱 많은 발병율을 볼수있었다.

A new Gomchwi cultivar ‘Sammany’ was developed by a cross between Gomchwi (Ligularia fischeri (Ledeb.) Turcz.) and Handaeri-gomchwi (Ligularia fischeri var. spiciformis Nakai). Gomchwi is a common Korean name referring wild edible plant species within Ligularia genus. ‘Sammany’ has purple colored petiole ears and petiole trichome is absent. It has 2nd degree leaf vein density. Plant height, leaf length, leaf width and petiole length were 46.2, 19.1, 19.5 and 32.1 ㎝, respectively. Plant height was higher than ‘Gondalbi’. Bolting occurred in mid. July and it flowered from late August to early September. ‘Gondalbi’ bolted and flowered 26 days earlier than ‘Sammany’, and consequently has earlier flowering time more than 26 day. Leaf number of ‘Sammany’ was 156 per plant but ‘Gondalbi’ had 130. ‘Sammany’ had thicker leaves (0.61 ㎜) compared to ‘Gondalbi’ (0.46 ㎜). As a result, yield was higher in ‘Sammany (1,077 g/plant)’ than ‘Gondalbi (798 g/plant)’ and leaf hardness was lower in ‘Sammany (20.8 ㎏/㎠)’ compared to ‘Gondalbi (23.0 ㎏/㎠)’. In addition, ‘Sammany’ was found to be moderately resistant to powdery mildew. With enhanced agronomic and pathology traits, ‘Sammany’ was newly registered as a new Gomchwi cultivar (variety protection no. 131 on May 2017).

Four bacterial blight resistance genes, Xa1+Xa3+xa5+Xa21, pyramid elite japonica rice lines were developed for enhancing the resistance of rice against Xanthomonas oryzae pv. oryzae in Korea. Seven doubled haploid (RDL1-7) and ten F6 lines (RPL1-10) having Xa1+Xa3+xa5+Xa21 which were derived from the cross between Ilmi, high grain quality japonica rice cultivar carrying Xa1, and Iksan575, elite line carrying Xa3+xa5+Xa21, were developed using marker-assisted selection for resistance genes and phenotypic selection for bacterial blight resistance and agronomic traits. Among resistance genes combinations in F2 population, four resistance genes combination, Xa1+Xa3+xa5+Xa21, showed the highest resistance and conferred the enhanced resistance than three genes combination, Xa3+xa5+Xa21. Four genes pyramid lines (RDL and RPL) showed broad-spectrum resistant against 16 Korean bacterial blight isolates and the yield and quality of the lines did not alter by the inoculation of K3a, the most virulent race in Korea. In addition, these lines had excellent plant type and exhibited more enhanced yield than previously developed resistant cultivars. Four bacterial blight resistance genes combination, Xa1+Xa3+xa5+Xa21, was efficient and promising combination and developed lines with four genes could be useful materials and will be applied to the breeding programs for enhancing the resistance of japonica rice against bacterial blight.

최근 사용자의 다양성을 만족시키기 위한 평면의 가변성에 요구증대와 건축물의 수명증대를 위한 방안으로 공동주택의 구조형식 이 기둥식 구조, 무량판 복합구조로 변화하고 있으며 이에 따라 공동주택의 경량벽체의 적용이 요구되고 있다. 이와 함께 벽체에 부착되는 제 품의 사용이 급증하면서 이에 따른 경량벽체 부착물에 대한 하중저항성능에 대한 평가방법이 요구되고 있다. 이를 위해 국내에서는 아직 도입 되지 않은 경량벽체 부착물에 대한 하중저항성능의 국외 시험방법에 대한 고찰 및 적용을 통하여 국내 실정에 맞는 시험장치를 제안하고 국내 사례조사를 통한 하중기준을 제안하여 경량벽체 부착물에 대한 하중저항성능 평가방법 개발을 위한 기초적인 자료로 제시하였다.

This experiment can maximize the decline of the heat on steel structure by using the magnesium hydroxide and aluminum hydroxide which generally used to resistant or retardant. These materials can delay a temperature rise due to the generation of vapors around the fire resistive covering, when reacting with heat by a creating moisture. Therefore, applicability of the fire resistance mortar used magnesium hydroxide and aluminum hydroxide was studied and experimented. As a result, in case of the workability is satisfied with the condition of site, but in case of the bonding strength is not satisfied with the standard with fire resistance mortar.

Bacterial wilt (BW) caused by Ralstonia solanacearum is one of the most common soil-borne vascular diseases of many solanaceous crops such as pepper and tomato. This study aimed to develop molecular markers closely linked to bacterial wilt resistance genes using a 150 F8 recombinant inbred line (RIL) population obtained from a cross of ‘YCM334’ x ‘Taean’. For pathogen inoculations, R. solanacearum isolate WR-1 was cultured on NB medium at 28℃ for 48 h and a bacterial suspension was adjusted to 1 x 107 to 1 X 108 CFU/mL (A 600 = 0.3 to 0.4). Each RIL and the parents were sown in a 72-cell plastic tray filled with sterilized soil, and the seedlings were inoculated at the 6 to 8 leaf stage using soil-drenching (3 to 5 ml/ plant) inoculation methods with 3 replications. After 10 days post inoculation (dpi), each line was evaluated visually for occurrence of bacterial wilt ranging from 1 (most resistant) to 5 (most susceptible). Two candidate R-response genes, AT4G14130 and AT3G23730, were selected to find SNPs between YCM334 and Taean. In previous transcriptome analysis, these two genes were reported as significantly differentially expressed in Capsicum annuum L. root inoculated with R. solanacearum, which were up-regulated in a resistant genotype. Once the synteny of the gene locations between Arabidopsis and pepper was documented, the sequences on pepper chromosome 12 were obtained from pepper. v.1.55 (http://solgenomics.net). SNP markers associated with resistance to BW will be mapped using pepper RIL population.

Leaf mold disease in tomato (Solanum lycopersicum) is caused by Cladosporium fulvum, a fungal leaf pathogen. One of effective ways to control leaf mold is to breed disease-resistant tomato cultivars. Cf-4 and Cf-9 resistance (R) genes encode proteins that carry a leucine rich repeat domain and are located in plasma membrane. They trigger hypersensitive response following recognition of corresponding Avr4 and Avr9 proteins of C. fulvum, respectively. Cf-4 and Cf-9 genes are originated from wild tomato species S. habrochaites and S. pimpinellifolium and have been introgressed into commercial tomato cultivars. These two highly homologous orthologs exist as a cluster with four highly homologous paralogs. Due to this reason, development of genetic markers to distinguish these two functional R genes from their orthologs and paralogs is difficult. In this study, we tried to develop single-nucleotide polymorphism (SNP) markers to select tomato cultivars carrying resistant Cf-9 genotype. The genomic sequences of resistant Cf-4 and Cf-9 alleles, susceptible cf-9 alleles, and their paralogs were obtained from the GenBank database, and two functional SNPs causing non-synonymous substitution were found among them. Based on two SNPs, the Cf-9_2-SNP-F/R primer set for high resolution melting (HRM) analysis was developed. HRM analysis with this primer set could successfully distinguish tomato cultivars carrying resistant Cf-9 allele among 30 commercial tomato cultivars, which were characterized with the gene-based marker. These indicate that the SNP marker developed in this study is useful to trace Cf-9 genotype efficiently in marker-assisted selection in tomato.

Tomato spotted wilt virus (TSWV) causes one of the most destructive viral diseases that threaten tomato (Solanum lycopersicum) worldwide. So far, eight TSWV resistance genes, Sw1a, Sw1b, sw2, sw3, sw4, Sw-5b, Sw-6, and Sw-7 have been identified and Sw-5b has been incorporated into tomato for prevention of TSWV. The objectives of this research are first to discover single nucleotide polymorphisms (SNPs) in Sw-5 alleles and then to develop SNP markers to distinguish resistant genotypes against TSWV for marker-assisted breeding in tomato. First, DNA sequences of Sw-5b alleles from both resistant and susceptible cultivars amplified using known Sw-5 gene-based marker was analyzed. The single functional SNP (G→A) was detected as non-synonymous substitution because this SNP causes change of arginine (Arg599) to glutamine (Gln599). Next, the primer pair for high resolution melting analysis (HRM) was designed around this SNP. To determine accuracy of this SNP marker to distinguish resistant Sw-5b genotypes against TSWV, genotypes of 32 commercial tomato cultivars were checked. The newly developed SNP marker could select six cultivars carrying resistant Sw-5b genotype, which was 100% correlated with genotypes based on the gene-based marker. These results indicate that the SNP maker developed in this study could be useful for better tracking resistance to TSWV in tomato breeding.

For efficient introgression of the downy mildew resistance gene from a resistant cultivar into domestic breeding lines, molecular markers used for marker-assisted backcrossing (MAB) were developed in onion (Allium cepa L.). The resistance gene (Pd) was originally introgressed from a wild species, A. roylei, by interspecific hybridization, and the resistant gene was known to be positioned at the end of chromosome 3. Therefore, cDNA sequences of loci located at the ends of chromosome 3 of two linkage maps were obtained from a transcriptome database. Primer pairs were designed on exon sequences of eight loci. Among them, the PCR products of the i25255 locus showed length polymorphism between A. roylei and onions, and both large and small-sized PCR products were observed in the resistant cultivar. Sequence analysis showed that a 67-bp indel existed in the intron sequences. Based on this indel polymorphism, a simple PCR marker, designated DMR1, was developed. Analysis of diverse onion accessions showed that no accessions contained the A. roylei-specific marker genotype except for the resistant cultivar. These results indicated that the DMR1 marker was successfully tagging the A. roylei fragment harboring the downy mildew resistance gene, and the resistant cultivar was heterozygous for the resistance gene. After further analysis of multiple loci positioned at chromosome 3, a range of the A. roylei fragment introgressed in the resistant cultivar was determined in two linkage maps. On the basis of the range of the A. roylei fragment, three molecular markers used for recombinant selection in MAB were also developed.

Rice blast caused by the fungal pathogen, Magnaporthe oryzae, is a serious disease affecting yield loss and decreasing its quality in rice production. Rice breeders in Korea have developed many japonica varieties showing resistance to blast. However, the blast resistance in most japonica varieties has broken down within a few years after they were released to farmers because of the spread of new virulent races of M. oryzae. There is the most effectiveness to look for novel resistant gene(s) that can express the resistance to broad-spectrum races in diverse environmental conditions. We identified a major QTL, qLB4.1 linked tightly to RM6352 and RM3643 in 52.6 cM region on chromosome 4 related to the resistance for isolate inoculation and nursery test, and neck blast from a Korean weedy rice, Geumleungaengmi33. This QTL explained 26.1∼28.6% and 45.3∼53.1% of total phenotypic variation by the allele of GL33 for isolate inoculation and nursery test, respectively. A line SR30058(52)-1-1 (Suweon545) that containing the QTL qLB4.1 was developed from Ilpum*4/GL33 by marker-assisted backcross method. This line showed resistant reactions to blast nursery test across regions and years, and resistance to neck blast at the hot-spot field in Jecheon. Suweon545 showed also durable resistance of lower 10% of diseased leaf areas (DLAs) in sequential planting method. This line screened by graphical mapping using 136 SSR markers that evenly distributed on 12 chomosomes. Suweon545 contained GL33 alleles of donor parent in a total of 12 loci (8.8%) including QTL region on chromosome 4. In future, Suweon545 would be useful to develop the broad-spectrum resistance variety in japonica rice breeding program.

This study was conducted to develop the early maturing rice lines with genes conferring resistance to bacterial blight and rice stripe virus to enhance the adaptability in plain area. Unkwang carrying Xa3 was used as a recurrent parent and SR30075 carrying Xa4+xa5+Xa21+Stvb-i was used as a donor parent. RL1(Resistant Line, BC1F7), RL2, RL3, RL4, and RL5(BC2F6) were bred through bio-assay of K3a race inoculation and phenotypic selection of agronomic traits. The presence of introduced genes was confirmed by testing the resistance levels against bacterial blight and rice stripe virus and then double-checked by using DNA marker. RL1 has all target genes, Xa3+xa5+Xa21+Stvb-i. RL2, RL3, and RL5 have Xa3+Xa21+Stvb-i whereas RL4 has only Xa21. Rice lines carrying Stvb-i showed resistance reaction to rice stripe virus. The combinations of bacterial blight resistant genes(Xa3+xa5+Xa21 and Xa3+Xa21) were found to be promising, as the rice lines carrying these genes enhanced a strong resistant reaction against 16 bacterial blight isolates. Also, the inoculation of K3a race did not alter the brown rice yield, ripened grain ratio and kernel quality of brown rice compared to control. Although RL1 containing all the target resistance genes showed excellent resistance performance, it is not suitable to cultivate in plain area due to instability to lodging, 80% yield level than Unkwang, and low grain quality. RL5 backcrossed twice with Unkwang was found to be a promising line due to its effective resistance gene combination, Xa3+Xa21+Stvb-i and good agronomic traits such as stability to lodging, higher yield and quality compared to Unkwang.

Recently, most underground structures are used parking lot and artificial ground greening is growing on the top of the structures also. Various waterproofing-root resistance materials and methods has been developing to artificial ground greening system based on concrete structures. However, It is hard to confirm proper quality control standard of waterproofing-root resistance materials because of complicated environment and conditions of special site which is artificial ground greening. This study goals to develop a evaluaion techniques to mak sure of the long term stability waterproofing-root resistance material on artificial ground greening system.