In this study, changes in the quality and headspace O2/CO2 concentrations of cubed radish (Raphanus sativus L.) kimchi (CR-kimchi) packaged using multilayer airtight film (MAF), half-area breathable film (HABF), partial area breathable film (PABF), and one-way degassing valve-mounted film (ODVF) were investigated during storage under altering temperature conditions. The total lactic acid bacteria count in CR-kimchi samples stored for 6 days at 0℃, followed by 8 days at 6oC, increased to 7.8-7.9 log CFU/g, regardless of the packaging. The titratable acidity of the CR-kimchi samples increased to 0.6-0.7% during storage at 0oC for 6 days and then at 6oC for 8 days; it was maintained at 0.6-0.8% for 32 days of storage at 3oC. After 46 days of storage, the reduced sugar content of CR-kimchi packaged using MAF, HABF, PABF, and ODVF decreased to 26.8-30.3 mg/g, indicating no significant (p>0.05) differences. However, during storage, headspace CO2 concentration and film volume were lower in the HABF treatment than in the control, PABF, and ODVF treatments, indicating that HABF packaging combined with supercooled (3oC) storage can extend the optimal ripening period of CR-kimchi without packaging expansion during storage.

The thermal treatment of radioactive waste attracts great attention. The thermal treatment offers lots of advantages, such as significant volume reduction, hazard reduction, increase of disposal safety, etc. There are various thermal technologies to waste. The developed technologies are calcination, incineration, melting, molten salt oxidation, plasma, pyrolysis, synroc, vitrification, etc. The off-gas treatment system is widely applied in the technologies to increase the safety and operation efficiency. The thermal treatment generates various by-product and pollutants during the process. The dust or fly ash are generated as a particulate from almost every radioactive waste. The treatment of PVC related components generates hydrogen chloride, which usually brings corrosion of facility. The treatment of rubber and spent resin generates sulfur oxide, SOx. The treatment of nitrile rubber generates nitrogen oxide, NOx. The incomplete combustion of radioactive waste usually generates carbon oxide, COx. The process temperature also affects the generation of off gas, such as NOx and/or COx. Various off gas treatment components are organized for the proper treatment of the previously mentioned materials. In this study systematical review on off gas treatment will be reported. Also, worldwide experiences and developed facility will be reported.

The primary purpose of high temperature process of radioactive waste is to satisfy the waste acceptance criteria and volume reduction. The WAC offers the guideline of waste form fabrication process. The WAC is defined as quantitative or qualitative criteria specified by the regulatory body, or specified by and operator and approved by the regulatory body, for radioactive waste to be accepted by the operator of a repository for disposal, or by the operator of a storage facility for storage. The main objective of WAC is to protect staff and general public and environment by the containment of radioactive material, limit external radiation level, and prevent criticality. The WAC also offers systematic management of radioactive waste by standardization of waste management operations, facilitation waste tracking, ensure safe and effective operation of operating facilities, etc. Since the high temperature process for radioactive waste is considered in many countries, lots of codes and standards are considered. In many WACs, compressive strength, thermal cycle stability, radiation exposure stability, free liquid, and leachability are evaluation to understand the effect of solidified form to the disposal facility. In this paper, systematical review on waste form will be discussed. In addition, brief result of characterization of waste form will be compared.

High level radioactive waste (HLW) final disposal repository is faced thermos-hydro-mechanical - radioactive condition because it is placed over 500 m in depth and waste emits decay heats for decades. Repository will be operated around 100 years and will be closed after all the wastes are disposed. The integrity of engineered barriers including buffer, backfill, concrete plug and canister and natural barrier (natural rock mass) will be stood during operating periods. Monitoring sensors for concrete and rock mass is conducted using piezo based sensors such as accelerometer or acoustic emission (AE) sensors. Typical accelerometer for harsh conditions is commonly expensive and data/power cable can be a potential groundwater inflow and nuclide outflow path. The fiber optic accelerometer whose data and power cable are united and has limited volume. Therefore, it can be a potential alternative sensor of piezo based sensors. The temperature limits and accelerated tests for fiber optic sensors are conducted. Most of sensors gives a malfunction around 130°C. The results of these experimental tests give a possibility of communications in compacted bentonite buffer and will be utilized for the design of monitoring systems for the repository.

In environments where buffer materials are exposed to increased temperature due to the decay heat emitted by radioactive waste, it is crucial to assess the performance of the buffer material in relation to temperature effects. In this study, we conducted experiments using Bentonil-WRK, a calcium-type bentonite, compacted to a dry density of 1.65 g/cm3 and an initial water content of 15%. The experimental temperature conditions were set to 30, 60, 90, 110, and 130°C. We observed that the swelling pressure of the compacted bentonite buffer decreased as the temperature increased. The findings from this study can provide valuable guidance for the design of high-level waste repository in Korea.

This study presents a method for analyzing the surface temperatures of specific facilities, such as the 5 MWe reactor within the Yongbyon Nuclear Complex, to explore its potential utility in monitoring suspected nuclear-related activities in North Korea using thermal infrared (TIR) satellite imagery (Landsat series). TIR band data is utilized to derive surface temperatures in the specified areas, and the temperatures are analyzed on a monthly basis to examine any patterns within these regions. This research provides a pattern-of-life on temperature variation for the target areas through multiple TIR image datasets, offering additional information to analyze facilities’ operational status in remote and inaccessible regions.

In the automotive information display device industry, products with high reliability and wide temperature conditions are required, and interest in products that do not cause lighting defects even under extremely low temperature conditions is increasing. In this experiment, we produced an LED backlight unit for car navigation in a cryogenic environment. And to make this backlight unit, we used 12 side-emitting white LEDs with 3[W] high power LEDs. This backlight unit emits up to 18,000[nits] at a power consumption of 36[W] and has a startup voltage time of less than 1[ms] at -50° ambient temperature.

본 연구는 계란의 품질 유지를 위한 온도변화의 영향을 평가하고 실제 유통 환경에서 난각에 Salmonella Enteritidis 가 오염된 비세척란의 적절한 온도 관리 방법을 결정하고 자 하였다. Salmonella Enteritidis가 접종된 비세척란은 총 7일간 25oC 항온보관 및 5가지의 다른 온도변화조건에서 보관하였다. 온도변화조건은 계란을 초기 25oC에서 보관 중 온도를 10oC 또는 35oC로 변화하였다. 보관 중 기실의 높이, 중량감소율, 비중 및 농후난백 비율을 1일 간격으로 평가하였다. 기실의 높이, 중량감소율, 비중은 25oC 보관 3일 및 4일차에 10oC로 온도를 낮추었을 때 초기값이 유 의적으로 보존되었다. 농후난백 비율은 초기 값과 비교하 였을 때 보관 조건에 따른 유의한 차이를 나타내지 않았 다. 이러한 결과는 25oC 보관 3일 및 4일차에 10oC로 낮 추는 것이 실제 유통 시 비세척란의 안전관리에 적합함을 시사하였다.

In this study, we examined dimensional changes in processing carbon fiber composites using a cost-competitive domestic high-speed router. Lacking temperature compensation features found in typical machines, it faces increased defect rates due to temperature fluctuations during processing. To mitigate this, we defined specific processing temperature conditions, established hole positions as distance references for various temperatures, and measured dimensional changes. This enabled us to calculate necessary dimensional corrections, minimizing thermal deformation.

Raman distributed temperature sensor can be used as temperature instruments as well as monitoring abnormalities in next-generation nuclear systems. Since noise reduction and Measuring Frequency enhancement are required, integration time adjustment has been mainly used so far. In this study, a new data processing method using Moving Average Filter was analyzed to see if noise reduction and Measuring Frequency could be reduced, and improvement measures were suggested.

Cars using diesel have always had problems with reducing exhaust fumes, and have been studied steadily in this regard. There were studies on the remanufacturing effect of DOC catalyst deactivated by diesel vehicle smoke reduction device, analysis of vehicle fire accident cases caused by damage to diesel vehicle smoke reduction device, and related studies on the remanufacturing effect of diesel vehicle smoke reduction device DPF. This study is also to develop an exhaust flow control unit suitable for an exhaust engine to completely burn smoke generated by an engine using a diesel engine in a low temperature exhaust gas. The main systems to be developed are high-performance heaters, burner structures that can maintain ignition in exhaust flows, and exhaust flow control units that reduce exhaust gas backflow effects caused by diesel engines.

In this study, numerical analysis was performed for the purpose of analyzing the flow characteristics and performance according to the change in the inflow hydrogen temperature and differential pressure of the receptacle of the hydrogen charging system. The pressure distribution and turbulent kinetic energy in the filter area were analyzed by changing the outlet pressure condition under the inlet hydrogen temperature condition, and the flow velocity change at the outlet was compared and analyzed. As a result of the analysis, as the differential pressure decreased, the flow rate at the outlet of the receptacle decreased by up to about 70% at the 2.86 MPa condition compared to the 1.86 MPa condition, and the mass flow rate decreased by about 56.5% at the maximum. It was found that the standard CV performance was not satisfied when the differential pressure at the inlet and outlet was 1.12 MPa or less under the 363K temperature condition.

ars using diesel have always had problems with reducing exhaust fumes, and have been studied steadily in this regard. There were studies on the remanufacturing effect of DOC catalyst deactivated by diesel vehicle smoke reduction device, analysis of vehicle fire accident cases caused by damage to diesel vehicle smoke reduction device, and related studies on the remanufacturing effect of diesel vehicle smoke reduction device DPF. This study also developed an optimized system for complete combustion of smoke generated by institutions using diesel engines in low-temperature exhaust gases. The main systems to be developed are high-performance heaters, burner structures that can maintain ignition in exhaust flows, and exhaust flow control units that reduce exhaust gas backflow effects caused by diesel engines.

This study aimed to assess and determine the optimal model for predicting the full bloom date of ‘Fuji’ apples across South Korea. We evaluated the performance of four distinct models: the Development Rate Model (DVR)1, DVR2, the Chill Days (CD) model, and a sequentially integrated approach that combined the Dynamic model (DM) and the Growing Degree Hours (GDH) model. The full bloom dates and air temperatures were collected over a three-year period from six orchards located in the major apple production regions of South Korea: Pocheon, Hwaseong, Geochang, Cheongsong, Gunwi, and Chungju. Among these models, the one that combined DM for calculating chilling accumulation and the GDH model for estimating heat accumulation in sequence demonstrated the most accurate predictive performance, in contrast to the CD model that exhibited the lowest predictive precision. Furthermore, the DVR1 model exhibited an underestimation error at orchard located in Hwaseong. It projected a faster progression of the full bloom dates than the actual observations. This area is characterized by minimal diurnal temperature ranges, where the daily minimum temperature is high and the daily maximum temperature is relatively low. Therefore, to achieve a comprehensive prediction of the blooming date of ‘Fuji’ apples across South Korea, it is recommended to integrate a DM model for calculating the necessary chilling accumulation to break dormancy with a GDH model for estimating the requisite heat accumulation for flowering after dormancy release. This results in a combined DM+GDH model recognized as the most effective approach. However, further data collection and evaluation from different regions are needed to further refine its accuracy and applicability.

본 연구에서는 미국 해양 대기청(NOAA)의 NOAA-20 위성에 장착된 차세대 고해상도 복사계인 VIIRS로부터 산출된 적외 해수면온도의 자료를 수집하고, 실측 자료와의 일치점을 생산하여 한반도 주변 해역에서의 정확도를 검증 하였다. 2020년 5월부터 2023년 6월까지 최근 3년간의 자료를 사용하였고, 총 75,700개의 일치점을 생산하였다. NOAA-20/VIIRS 해수면온도는 표층 뜰개 부이 관측 해수면온도와 비교해보았을 때 약 0.52K의 평균 제곱근 오차와 – 0.12 K의 평균 편차를 보였고, 이는 전구 해역을 대상으로 한 기존의 정확도 검증 연구 결과값을 상회하는 수치였다. NOAA-20 해수면온도의 오차 특성 분석 결과 겨울과 봄에는 음의 편차가, 여름철에는 양의 편차를 보이는 계절적 특 성이 나타났으며, 15-16시에 최대 평균 제곱근오차, 최대 양의 편차 및 22-24시에 최소 평균제곱근오차, 최소 편차를 가지는 일간 변화를 보였다. 이외에도 NOAA-20 해수면온도의 오차는 풍속, 위성 천정각, 연안으로부터의 거리, 해수면 온도의 공간 구배 크기에 영향을 받아 변동하는 특성이 나타났다. 전반적으로 위성 해수면온도의 편차값은 14ms1 이 상의 풍속 범위에서 풍속이 커질수록 양의 방향으로 증가하는 경향을 보였으며, 5 m s1 이하의 낮은 풍속 범위에서는 풍속이 약해질수록 낮/밤 자료에 따라 각각 양의 방향, 음의 방향으로 편차가 증가하였다. 위성 천정각이 커질수록 해 수면온도의 오차 범위는 급격하게 증가하였으며, 연안에 근접할수록 (<300 km) 위성 해수면온도의 오차가 증가하는 것 을 확인할 수 있었다. 해수면온도의 공간 구배는 그 크기가 커질수록 위성 해수면온도의 평균 제곱근 오차를 증폭시키 는 경향이 나타났다. 국지적인 해역에서의 위성 해수면온도 정확도 및 오차 특성은 전구 해역에서의 전반적인 특성과는 다르게 나타날 수 있다는 점을 고려할 때 본 연구는 향후 한반도 주변해에서 VIIRS 해수면온도를 활용하기 위한 선행 연구로 해수면온도 오차의 변동 특성 및 분포에 대한 깊은 이해가 필요함을 시사한다.

The effects of exogenous sodium nitroprusside (SNP, nitric oxide donor) on the growth, yield, photosynthetic characteristics, and antioxidant enzyme activity of kimchi cabbage (Brassica rapa L. subsp. pekinensis (Lour.) Hanelt) was studied under the low temperature conditions. Kimchi cabbages were treated with SNP of three concentrations (7.5, 15, 30 mg·L-1) for three times at four-day intervals and exposed to low temperature (16/7°C) stress for seven days. SNP treatment induced increases of net photosynthetic rate (Pn), stomatal conductance (Gs), intracellular CO2 concentration (Ci) and transpiration rate (Tr) under the stress condition with the highest level after the third treatment. The contents of malondialdehyde (MDA) and H2O2 were significantly lower in the treatment of SNP compared to the non-treated control. The activity of ascorbate peroxidase (APX), catalase (CAT), peroxidase (POD) and superoxide dismutase (SOD), increased in treated plants by up to 38, 187, 24 and 175%, respectively compared to the non-treated control. SNP-treated and untreated plants had similar growth characteristics. Compared to the control group, SNP-treatment increased fresh weight and leaf area by 5%. Overall, our findings suggest that the application of sodium nitroprusside to the leaves contributes to reducing physiological damage and enhancing the activities of antioxidant enzymes, thereby improving low temperature stress tolerance in kimchi cabbage.

본 연구는 국내 가정에서 사용하고 있는 냉장고 및 냉 동고의 온도 분포에 대한 현황을 파악하기 위하여 냉장고 대상 25가구, 냉동고 대상 25가구를 선정하고 온도 측정 을 시행하였다. 가정용 냉장 및 냉동고의 실제 공간상의 온도 분포 조사 결과, 냉장고 대상 가구에서 측정된 온도 는 최저 -8.2oC, 최고 15.8oC, 평균 3.73oC로 조사되었으며, 공간 위치별 온도 분포는 문 보관 칸 5.06±1.69oC, 내부 벽면 4.18±1.19oC, 내부 보관함 3.41±1.36oC로 내부 보관함 의 온도가 가장 낮았고, 각 위치에서 상단 및 하단의 유의 적인 온도 차이는 문 보관 칸에서만 확인되었다(P<0.01). 냉 동고 대상 가구에서 측정된 온도는 최저 -30.3oC, 최고 0.7oC, 평균 -17.95oC로 조사되었으며, 공간 위치별 온도 분포는 문 보관 칸 -17.19±1.68oC, 내부 벽면 -17.81±1.07oC, 내부 보관함 -18.78±1.72oC로 냉장고 결과와 동일하게 내부 보 관함의 온도가 가장 낮고, 문 보관 칸에서만 상·하단의 유 의적인 온도 차가 확인되었다(P<0.01). 냉장·냉동고 내에 서 위치별 최대 온도 차이는 각각 2.18oC, 2.02oC로 확인 되었으며, 결론적으로 냉장·냉동고 전체의 온도가 일정하 게 유지되는 것이 아니며, 보관되는 위치별로 유의적인 편 차가 존재하는 것으로 나타났다. 이에 따라 냉장·냉동고 제조사와 공공기관에서 식품별 권장 보관 위치를 고객들 에게 적극적으로 권고하고, 각 가정에서는 온도 변화에 민 감한 식품을 보관할 경우 문쪽 보관을 지양하는 등 보관 관리 의식을 가져야 할 것으로 사료된다.