In recent years, technology has been developed the way the volume of the portable communication device is reduced but its performance is maintained. The COF(Chip On Film) packaging method is used due to the densification of the lead pitch, especially for the display driver IC. During COF packaging, lead break and film detachment could occur by the high bonding temperature and pressure, and possibility for lead interference can emerge by deformation of leads. In this study, a new double-column arrangement of leads is considered to increase lead density further than the existing zigzag arrangement of leads, and nonlinear structural analysis was carried out to examine whether the interference can occur. The results showed that stress and deformation of the corner region appear relatively higher than those of central region, and interference did not occur by the lead strain for the double-column arrangement of leads with pitch of 25μm. Therefore, double-column lead arrangement can improve lead density by about 176% compared to the zigzag lead arrangement

근래 국내 초고층 주상복합 건물에는 철근콘크리트구조가 보편적으로 적용되는데, 이러한 철근콘크리트 초고층 주상복합 건물은 시공 시점에 따라 구조적인 문제가 발생할 수 있다. 따라서, 시공 중인 철근콘크리트 초고층 주상복합 건물에 대하여, 시공 시점별 구조 안전성 및 횡력저항성능을 검토하고자 한다. 이를 위해, 예제 모델로 탑상형의 초고층 주상복합 60층 건물을 선정했고, 기존의 범용구조해석 프로그램을 사용하여 구조해석을 수행하였다. 각 시공 시점별 10층, 20층, 30층, 40층, 50층, 60층 완료모델과 60층 완공단계 모델의 구조성능을 비교하였다. 구조성능 비교를 위해 이 모델들의 고유치해석을 수행하였으며, 횡력저항성능과 부재별 단면성능을 검토하였다. 횡력저항성능 검토를 위해 횡변위비와 층간변위비를 검토했고, 부재별 단면성능 검토는 완공단계에 대한 설계강도비와 시공단계의 설계강도비를 비교하여 부재안전성을 검토하였다. 이 연구를 통해, 시공 중인 철근콘크리트 초고층 건물의 구조 안전성을 검토하고 시공단계에 적합한 구조해석 및 설계하중의 가이드라인을 제시하고자 한다.

This study suggested comprehensive structural characterization methods for the commercial blue light emitting diodes(LEDs). By using the Z-contrast intensity profile of Cs-corrected high-angle annular dark field scanning transmission electron microscope(HAADF-STEM) images from a commercial lateral GaN-based blue light emitting diode, we obtained important structural information on the epilayer structure of the LED, which would have beendifficult to obtain by conventional analysis. This method was simple but very powerful to obtain structural and chemical information on epi-structures in a nanometer-scale resolution. One of the examples was that we could determine whether the barrier in the multi-quantum well(MQW) was GaN or InGaN. Plan-view TEM observations were performed from the commercial blue LED to characterize the threading dislocations(TDs) and the related V-pit defects. Each TD observed in the region with the total LED epilayer structure including the MQW showed V-pit defects for almost of TDs independent of the TD types: edge-, screw-, mixed TDs. The total TD density from the region with the total LED epilayer structure including the MQW was about 3.6 × 108 cm−2 with a relative ratio of Edge- : Screw- :Mixed-TD portion as 80%: 7%: 13%. However, in the mesa etched region without the MQW total TD density was about 2.5 × 108 cm−2 with a relative ratio of Edge- : Screw- :Mixed TD portion of 86%: 5%: 9 %. The higher TD density in the total LED epilayer structure implied new generation of TDs mostly from the MQW region.

구조실험을 위한 데이터 저장소는 구조실험에 관련된 실험정보를 구조공학자와 연구자들이 편리하게 저장하고 열람할 수 있도록 효율적인 구성을 가져야 한다. 데이터 저장소에 대한 평가는 데이터 저장소 자체적인 구성에 대한 평가와 데이터 저장소에 저장된 실제 정보의 구성에 대한 평가로 나눌 수 있다. 데이터 저장소의 자체적인 구성은 클래스로 나타낼 수 있고 데이터 저장소 내에 저장된 실제의 실험정보는 객체로 표현할 수 있는데 본 논문은 클래스와 객체가 가지고 있는 속성구성에 대한 평가요소를 제안한다. 클래스의 속성구성 평가요소로는 클래스내 속성수와 구체적인 값 또는 객체에 의해 구분한 속성의 종류별 수 등이 있는데 이러한 평가요소들을 이용하여 데이터 저장소가 정한 구성을 이해할 수 있다. 객체의 속성구성 평가요소로는 객체내 값있는 속성수 등이 있는데 데이터 저장소내의 실제 실험정보가 레벨별로 어떻게 저장되어 있는가를 파악할 수 있다.

LNG 방열 시스템의 선형 동적해석 모델을 사용하여 슬로싱 충격 압력을 구조해석에 적용 시 사용되는 이상화된 삼각파 압력에 대해서 검토하였다. 삼각파 압력의 최대값, 지속시간, 비대칭성의 충격파에 대한 구조 안전성 평가를 위해서 멤브레인 구조의 허용기준과 슬로싱 압력에 관련된 간략화된 파괴압력에 대해 검토하고, 슬로싱 충격 압력의 지속시간과 비대칭성으로 특징 지워진 이상화된 삼각파 형상의 압력을 고려한 일련의 선형 동적해석을 수행하여 설계기준으로 사용할 파괴압력을 도출하였다. 본 논문에서 제시한 방법을 통해서 방열시스템 구조 요소의 안전성을 평가하기 위한 파괴 압력을 선정할 수 있고 모형실험을 통한 슬로싱 압력과의 비교를 통하여 방열시스템의 구조안전성을 평가할 수 있을 것이라 판단된다. 또한 해석결과를 통해 방열시스템에서의 최대 응력은 매우 짧은 순간의 충격하중 하에서는 압력의 비대칭성 보다는 하중 지속시간에 많은 영향을 받고 있음을 검토하였다.

기계 구조물에서 부재의 결합부가 시스템 전체의 동적 거동에 매우 심각한 영향을 미치고 있다. 따라서 동적인 응답의 정확한 예측은 이러한 결합부를 어떻게 모델링 하느냐에 달려 있다고 해도 과언이 아니다. 본 논문에서는 결합부의 유연성을 정량적으로 표현하기 위하여 서로 대칭이고 마주보는 외팔보의 중앙에 선형 및 비틀림 스프링을 결합부에 이식하였다. 이를 바탕으로 결합부의 강성 변화에 따른 시스템의 재해석은 축약법과 유한요소법으로 계산하였다. 이항 급수로 표현되는 기저벡터의 수에 따라서 전체 모델의 크기는 획기적으로 감소되어 축약 모델로 매우 짧은 시간에 효율적으로 계산할 수 있었다. 본 연구에서는 두 가지 경우의 수치해석 예가 제시되어 축약 모델의 결과가 정밀해와 잘 일치함을 보여주고 있다.

In this study, we evaluated the chemical and physical properties of structural steel, which is the most basic material for steel structures and reinforcement concrete structures in modern period. We theorized the technical data for the research of technical history of modern heritage structures by analyzing the product system and its quality control of structural steel used in modern historical heritages. The results of this study are as follow; first, the rounded bars were used in most of modern heritage structures. But in the case of Waegwan railroad bridge, the deformed bars were used in spit of not using in Japan after the great earthquake of Kantou. Second, the structural steel was good in terms of quality control, but It has brittle properties because it was not manufactured by heat treatment process.

인양장비는 원자력발전소에서 발생하는 사용후핵연료를 운반하는 운반용기를 인양하기 위해 사용된다. 본 연구는 원자력 안전위원회고시 제2013-27호와 미국 10CFR Part 71 §71.45에서 규정하는 기술수준에 따라 이론적인 방법과 유한요소방법 으로 인양장비의 구조적안전성을 평가하였다. 이론적으로 평가한 결과 모든 구성 요소에서의 응력이 응력제한치 내에 있어 운영상 발생하는 구조적 안전성을 확보하고 있는 것으로 판단하였다. 또한 유한요소해석을 통한 평가결과, 항복과 극한조건 모두에서 설계기준을 만족하는 것으로 평가되었다. 모든 구성요소에서 충분한 안전여유도(항복조건에서 3 이상의 안전율, 극한조건에서 5 이상의 안전율)를 갖는 것으로 나타나 구조적으로 안전하다고 판단하였다.

In this study, Intersecting Tensegrity System that is integrated solid compression members with tension members was presented. This system is set up by connecting upper and lower compression members of pyramid shape with exterior tension members. In this system, the solid compression members are intersected each other and connected by a tension member in the center. This system is a variation of Tensegrity system, has a improved feature that the system is able to induce prestresses in all of tension members easily by adjusting the distance of a tension member in the center. The proposed system was studied by modeling, and the structural behavior of the system was investigated by mechanical analysis of the model. Furthermore, the features of the structural behavior variations was investigated when the composition elements(total height, size of surface, intersection length, etc.) are changed variously. It was also showed that the system is able to be used as a temporary space structure system with a membrane roof of inverse conical shape.

This paper presents the structural model development and verification processes of wind turbine blade. The National Renewable Energy Laboratory (NREL) Phase VI wind turbine which the wind tunnel and structural test data has publicly available is used for the study. The wind turbine assembled by blades, rotor, nacelle and tower. The wind blade connected to rotor. To make the whole turbine structural model, the mass and stiffness properties of all parts should be clear and given. However the wind blade, hub, nacelle, rotor and power generating machinery parts have difficulties to define the material properties because of the composite and assembling nature of that. Nowadays to increase the power generating coefficient and cost efficiency, the highly accurate aerodynamic loading evaluating technique should be developed. The Fluid-Structure Interaction (FSI) is the emerging new way to evaluate the aerodynamic force on the rotating wind blade. To perform the FSI analysis, the fluid and structural model which are sharing the associated interface topology have to be provided. In this paper, the structural model of blade development and verifying processes have been explained for Part1. In following Part2 paper, the processes of whole turbine system will be discussing.

As the world energy consumption grows, the interest in marin energy resources is increasing. In excavating such resources, the marine riser which connects the floating structure and sea bed is an essential device. The riser system is often exposed to harsh ocean environment and thus vulnerable to damage. Since the failure of the riser system may cause serious economical loss as well as environmental problem, the structural integrity of the riser is very important. Generally, the riser is an extremely slender structure with a much smaller diameter than a length. Therefore, a structural integrity monitoring methodology for typical buildings and bridges may not be applicable. In this paper, the applicability of a damage identification method for a structure to a marine riser is examined via a numerical example. Also, recent research practices and findings for monitoring the behavior and the structural integrity of the marine riser are examined and summarized.

An experimental study on the structural behavior of connection types between approach slab and integral abutment has been done for three typical bar connections. Typical hinge style reinforcing bar detail for its connection is preferred in order to accommodate rotation of the approach slab among engineers. However, the straight horizontal bars can be used as connection detail accomodate structural capacity. Total six specimens with three types of rebar detail are tested for direct tensile and bending load. The characteristic structural behaviors are carefully monitored and all the strain gauge data obtained are analyzed. It is shown that the structural performance of all the specimens well exceed its design allowance. Several design suggestions are given based on careful reviews on the experiment.

PURPOSES: Daejeon is basically divided into an old downtown and a new downtown, and the recent relocation of the Chungcheongnam-do Provincial Government of Republic of Korea from the old downtown and the opening of governmental buildings in the new downtown as well have made this new downtown only densely populated with industrial and business facilities. Such changes in the downtowns have promoted the conditions of the new downtown while, consequently, dragging down the old downtown. Out of concern for those unbalanced developments of the two downtowns, Daejeon is now carrying out several city projects to revive the old downtown. In the light of that, as a part of the project to promote the old downtown, this study aims to conduct an evaluation on landscape of the culture and arts street in Daeheungdong which was built upon those ideas of a theme street project by Daejeon. METHODS: Based on the findings from the questionnaire not only on the components that would design the streetscape of the culture and arts street but also on the public satisfaction with the streetscape, the study defined how those changes in the components affect emotional factors of the pedestrians. In order to achieve the research goal, the study made changes in D/H ratio of the street structural components as well as the roadside trees. In terms of the questionnaire method, the study used the SD scale, and proceeded with its investigation through the frequency analysis, the principal component analysis (the factor analysis) and the structural equation model. RESULTS : According to the results from the factor analysis and the regression analysis, of those three factors, such as the openness, the comfortable sensation and the safety, the openness followed by the comfortable sensation and the safety was determined to have the most positive influence on the total satisfaction. The structural model analysis reported that the D/H and the structural components of the roadside trees and planting have a positive effect on the emotional image, and this emotional image also appeared to be positively related to the total satisfaction. CONCLUSIONS : This study looked into how the changes in the street structural components of the culture and arts street in Daeheungdong would affect the satisfaction with the streetscape, and finally confirmed that the D/H and the planting are what would have a positive effect on this satisfaction. What has been learned from this study will be the basic data to figure out how to promote and improve the culture and arts street in Daeheung-dong as this data will also help designing and developing of those specialized streets in other regions.

This study attempted to figure out the usage of the modular system in other fields through literature review and empirical study, analyze its structural method in fashion. After analyzing architecture & product-related books, the Internet data and previous studies, the modular system's five structural methods were obtained. Then, 991 photos of women's clothes from 2003 to 2014 were collected through the fashion websites in Korea and abroad. The results can be summarized as follows: First, the following five structures were derived: assembling structure, overlapping structure, arrangement structure, inserting structure and folding structure. Second, according to analysis on the structural method of the modular system in modern fashion, overlapping structure (34%) was the most common. Third, in fashion, the use of fastener for installation and removal is important for assembling structure. In terms of overlapping structure, 3D volume by vertical accumulation was commonly observed. Arrangement structure revealed a horizontal and flat shape through simple arrangement. In inserting structure, on the contrary, non-standardized modules were used as a part of clothes or decorative elements. In folding structure, origami technique for reduction and expansion was used.

현실세계의 구조물은 대부분 동하중의 영향을 받고 있지만, 구조해석이나 구조 최적화를 수행할 때는 정하중이 작용하는 것으로 가정한다. 실제 하중인 동하중을 고려하게 되면 다양한 하중들을 고려해야 하기 때문에 전산자원과 시간비용 측면에서 많은 제약이 따르기 때문이다. 그러나, 단순한 정하중 조건만을 고려하면 구조안전성 측면에서 바람직하지 못하기 때문에 가중치를 적용하거나 동하중을 대체하는 등가정하중을 적용하여 관련 문제를 보완하려는 연구가 진행되어 왔다. 본 연구에서는 등가정하중을 적용하여 동하중을 받고 있는 구조물에 대한 구조최적화 기법을 제안한다. 본 연구에서 적용하는 등가정하중은 기존 연구에서 제안한 바 있는 주자유도를 기반으로 하여 등가정하중 부과 위치를 결정하고 최적화 과정을 통해 산출한다. 이 과정에서 지나치게 큰 하중이 구해지지 않도록 가중치를 고려한 구속조건을 추가하여 기존 연구의 등가정하중의 최적화 과정을 보완하였다. 수치예제에서는 동하중이 작용하는 트러스 구조물과 평판 구조물에서 최적화된 등가정하중을 적용하여 사이즈 최적화를 수행함으로써 제안된 최적화 기법의 신뢰성을 검증한다.

Pt nanopowder-dispersed SiO2 (SOP) films were prepared by RF co-sputtering method using Pt and SiO2 targets in Ar atmosphere. The growth rate and Pt content in the film were controlled by means of manipulating the RF power of Pt target while that of SiO2 was fixed. The roughness of the film was increased with increasing the power of Pt target, which was mainly due to the increment of the size and planar density of Pt nanopowder. It was revealed that SOP film formed at 10, 15, 20 W of Pt power contained 2.3, 2.7, and 3.0 nm of spherical Pt nanopowder, respectively. Electrical conductivity of SOP films was exponentially increased with increasing Pt power as one can expect. Interestingly, conductivity of SOP films from Hall effect measurement was greater than that from DC I-V measurement, which was explained by the significant increase of electron density.

Osmia cornifrons plays a major role in the pollination of orchards, but basic information on vitellogenin and the oocyte development is limited. To better understand vitellogenin in hymenopteran insects, we cloned a cDNA encoding vitellogenin from the hornfaced bee O. cornifrons. O. cornifrons vitellogenin cDNA contains 5477 bp with an open reading frame of 1,783 amino acid residues, and has a predicted molecular mass of approximately 200.21 kDa and a pI of 6.55. O. cornifrons vitellogenin possesses four consensus (RXXR/S) cleavage sites and has conserved DGXR and GL/ICG motifs in the C-terminus. The deduced amino acid sequence of the O. cornifrons vitellogenin cDNA showed a 66% identity with Megachile rotundata, 53% to Apis mellifera, 51% to Bombus ignitus, and 42%-30% with other hymenopteran insect vitellogenins. Phylogenetic analysis showed that O. cornifrons vitellogenin clustered with vitellogenins from Megachildae, Apidae, Vespidae, and Formicidae species but not with those from Pteromalidae, Aphelinidae or Ichneumonidae species.

In insect exoskeleton/cuticle, structural cuticular proteins (CPs) and the polysaccharide chitin are the major components of the procuticle. CPs are cross-linked by quinones or quinone methides produced by the laccase2 (Lac2)- mediated oxidation of N-acylcatechols. We reported that two major CPs, TcCPR27 and TcCPR18, belong to the CPR family that contain the RR-2 consensus motif (Rebers & Riddiford), are essential for formation and stabilization of the rigid cuticle of Tribolium castaneum adults. In this study, we characterized and investigated functions of the third most abundant protein, TcCP30, in extracts of elytra. TcCP30 cDNA encodes a protein with 171 amino acid residues containing a putative signal peptide. Unlike TcCPR27 and TcCPR18, TcCP30 mature protein lacks an RR motif, with a very unique amino composition, 36% Glu, 21% His, 20% Arg and 16% Gly. TcCP30 gene is highly expressed right before and after eclosion (in 5 d-old pupae and 0 d-old adults). Immunohistochemical studies revealed that TcCP30 protein was present in rigid cuticle such as elytra and ventral abdomen but not soft cuticle such as hindwings and dorsal abdomen of adult T. castaneum. Injection of dsRNA for TcCP30 into late instar larvae had no affect on larval and pupal growth and development. However, the subsequent pupal-adult molt, more than 50% adults were unable to shed their exuvium and died entrapped in their pupal cuticle. In addition, the resulting adults exhibited wrinkled, warped and split elytra. TcCP30-deficient adults could not fold their hindwings properly because probably due to the malformed elytra. These results indicate that TcCP30 is critical for formation of rigid adult cuticle as well as development and growth of T. castaneum.