본 연구는 해양시설의 HNS 배출허용기준 체계에 적용 가능한 사회적 영향인자 평가방법 및 절차를 도출하는데 목적이 있다. 인천광역시 소재 해양시설 71개소로 대상으로 기업규모에 따라 대기업, 중견기업, 중소기업, 소기업으로 구분하였고, 신규 기술도입비용 은 5년간 분산하여 적용하는 경우로 추산하였다. 분석결과는 다음과 같다. 첫째, 산업분야 항목에서는 경영상부담정도를 나타내는 지표 중 매출액감소 1점, 영업이익률감소 평균 3.5점, 도산가능성 2.7점으로 평가되어, 평균 2.7점으로 ‘영향있다’로 평가되었다. 둘째, 지역경제 항목의 평가지표 중 주민보건비지출부담 4점, 관광수입손실액 4점, 어업생산량감소 2점 등 전체 평균 3.3점으로 ‘영향크다’로 평가되었 다. 평가결과 산업적인 면에서는 소기업, 중기업, 대기업 간에 미치는 영향편차가 큰데, 대기업은 영향이 거의 없었고, 소기업은 영향을 크게 받는 것으로 나타났다. 지역경제면에서는 주민보건비지출부담, 관광수입감소, 어업생산량감소 등이 지역경제에 미치는 영향은 두가 지로 구분하여 볼 수 있는데, 지역전체 GRDP에 미치는 영향은 매우적지만, 해당 종사자나 주민 개인에 미치는 영향은 영향이 큰 것으로 나타났다.

In this study, the noise reduction effect of the steam vent silencer was investigated by performing a transient flow analysis applying the Loss Model, a porous flow analysis model, and calculating the noise intensity from the pressure fluctuation according to the time change. As a result of flow analysis, it was confirmed that the noise intensity decreased as the number of diffusers and the number of splitters made of foamed aluminum increased. In the case of three-stage diffusers, the noise intensity decreased by up to 33.4 dB when six foamed aluminum with a thickness of 150mm were installed.

Diesel engine has the advantages of strong power, low fuel consumption and good durability, so it has been widely used in transportation, automobile, ship and other fields. However, the nitrogen oxides(NOx) and particulate matter(PM) emitted by diesel engines have become one of the main causes of air pollution. Especially during idling, the engine temperature is low, and there are more residual exhaust gases in the combustion chamber, resulting in the formation of more harmful emissions. In this study, performance of a single cylinder, four-stroke, direct injection (DI) diesel engine fueled with diesel–biodiesel mixtures has been experimentally investigated. The findings show that a remarkable improvement in PM–NOx trade-off can be achieved by burning diesel-bioethanol blend fuels.

Dimethoxymethane, also known as methylal, is an oxygenated additive that contains approximately 42% oxygen content and is soluble in diesel fuel. Experiments were conducted by using the five kinds of blended fuels with different volumetric percentage of DMM in a diesel fuel. The test engine was used four stroke, single cylinder, DI diesel engine. Also, data was collected at 24 kinds of various engine speed-load conditions. The aim of this study was to examine the effects of the addition of oxygenated additive to diesel fuel on the emissions and the performance. Smoke emissions of all DMM blended fuels were reduced substantially in comparison with diesel fuel. In addition, this study showed that simultaneous reduction of NOx and smoke emissions could be achieved by oxygenated additive and EGR method that was applied to decrease smoke emissions increasing with NOx emissions reduction.

This study calculated the on-site measurement (Tier 4) of greenhouse gases emitted during the production stage of major fishing periods that utilize set nets and bamboo weir fishing boats. In addition, using theoretically calculated results (Tier 1), the emission factor presented by the Intergovernmental Panel on Climate Change (IPCC) was comparatively analyzed. On average, carbon emissions for each operating period in the bamboo weir and set net were calculated to be 0.16 and 3.58 kg CO2 time -1 , respectively; and the measurement values (Tier 4) for each tool were about 4-17 times lower than their respective theoretical values (Tier 1). Significant differences were found based on engine performance. As port entry, port departure, and operating periods of the vessels show negligible variation with short distances, the operation of the vessel engine was considered as the main variable for carbon emissions in anchovy set net fishing.

PURPOSES : A methodology for estimating micro-emission factors using vehicle trajectory data collected from navigation and DTG devices and basic emission factors for each vehicle type of the MOtor Vehicle Emission Simulator (MOVES) is presented. The methodology can calculate micro-emissions based on only the traffic volume and average speed for each vehicle type. METHODS : Cluster analysis was performed by accumulating the trajectories of individual vehicles on a specific road section into speed groups in which vehicles drove with the same range of average speed. Then, the micro-emission factors were estimated for each speed group. RESULTS : Using the vehicle trajectory data revealed that the emissions calculated from micro-emission factors estimated by the proposed methodology were similar to the sum of the emissions calculated from the vehicle trajectories for each vehicle. CONCLUSIONS : The micro-emission factor database for each road type and vehicle type proposed in this study should be useful for estimating vehicle emissions on the road. The proposed method can calculate emissions in the same way as the macroscopic analysis method, using the traffic volume, average speed, and link length.

인간의 활동으로 인해 발생한 온실가스가 산업혁명 이후 자연흡수량보다 많 아지면서 대기 중 온실가스 농도는 지속적으로 높아지고 있다. 이로 인해 지구 온난화현상이 가속되어 인류를 위협하는 수준에 도달하였다. 이에 UN에서는 기후변화협약, 교토의정서, 파리협정을 채택하였고, IMO에서는 기술적 조치, 운 항적 조치를 이미 시행하였고, 시장기반조치를 비롯한 여러 조치들을 시행하고 자 노력하고 있다. 한편, 국제적인 온실가스 감축을 위한 조치에 따라 우리 정부는 온실가스 감 축목표를 설정하고 온실가스 감축을 위해 노력하고 있다. 그러나 해운산업분야 와 관련된 국내법령은 이를 따라가지 못하고 있는 것이 현실정이다. 따라서 본 연구는 선박온실가스 배출규제의 국내이행의 문제점을 식별하고 개선방안을 제시하는 것을 목적으로 한다.