The structural safety of prototype transport and storage containers for very low-level radioactive liquid waste was experimentally estimated for its localization development. Transport containers for radioactive liquid waste have been researched and developed, however, there are no standardized commercial containers for very low-level radioactive waste in Korea. In this study, the structural safety of the designated IP-2 type container capable of transporting and temporarily storing large amounts of very low-level liquid waste, which is generated during the operation and decommissioning of nuclear power plants, was demonstrated. The stacking and drop tests, which were conducted to determine the structural integrity of the container, verified that there was no external leakage of the contents in spite of its structural deformation due to the drop impact. This study shows the effort required for the localization of the technology used in manufacturing transport and storage containers for very low-level radioactive liquid waste, and the additional structural reinforcement of the container in which the commercial intermediate bulk container (IBC) external frame was coupled.

Liquid Bi pool is a candidate electrode for an electrometallurgical process in the molten LiCl-KCl eutectic to treat the spent nuclear fuels from nuclear power plants. The electrochemical behavior of Bi3+ ions and the electrode reaction on liquid Bi pool were investigated with the cyclic voltammetry in an environment with or without BiCl3 in the molten LiCl-KCl eutectic. Experimental results showed that two redox reactions of Bi3+ on inert W electrode and the shift of cathodic peak potentials of Li+ and Bi3+ on liquid Bi pool electrode in molten LiCl-KCl eutectic. It is confirmed that the redox reaction of lithium with respect to the liquid Bi pool electrode would occur in a wide range of potentials in molten LiCl-KCl eutectic. The obtained data will be used to design the electrometallurgical process for treating actinide and lanthanide from the spent nuclear fuels and to understand the electrochemical reactions of actinide and lanthanide at liquid Bi pool electrode in the molten LiCl-KCl eutectic.

The purpose of this study is to compare the quality characteristics and antioxidant activities of the tagatose yogurt with different contents (6, 8, 10%) of cold brew liquid coffee. Tagatose is a low-calorie food ingredient with putative health-promoting benefits. The tagatose yogurt was fermented with Lactobacillus delbrueckii subsp. bulgaricus at 37±1oC for 20 h. The changes in acid production (pH and titratable acidity), viscosity, and lactic acid bacteria were determined every 5 h during fermentation. Color value was determined before and after fermentation, and antioxidant activities were performed after fermentation in triplicate. The yogurts containing cold brew liquid coffee had lower pH, higher acidity, and viscosity than the control, regardless of the liquid coffee contents. All samples had increasing levels of lactic acid bacteria over the fermentation period, but lactic acid bacteria of yogurts with the addition of cold brew liquid coffee increased further than the control. The total polyphenol/flavonoid content, DPPH/ ABTS/H2O2 radical scavenging activities, and reducing power increased when the liquid coffee content of the yogurt rose. Consequently, the optimal quality of tagatose yogurt was found when 6-8% of cold brew liquid coffee was added according to the overall results of quality properties and antioxidant activity.

The objective of this study was to develop a simultaneous method for 8 amino acids including alanine, arginine, glutathione, lysine, ornithine, methionine, threonine and tryptophan in veterinary products using LC-MS/MS. To optimize MS analytical condition of 8 amino acids, each parameter was established by multiple reaction monitoring in positive mode. The chromatogram separation was achieved on a C18 column with mobile phase of 0.1% formic acid in D.W. and 0.1% formic acid in acetonitrile for green technology at a flow rate of 0.4mL/min for 5 min with gradient elution. The developed method was validated for mass accuracy, precision, linearity in veterinary products. Calibration curves were linear over the calibration ranges (0.5 – 10 mg/L) for all the analytes r2>0.99. Average recoveries were 92.96 – 105.61% and relative standard deviations (RSD) were 0.27 – 3.5%. The limit of detection (LOD) and the limit of quantification (LOQ) were 0.04 – 0.83 mg/L and 0.12 – 2.52 mg/L, respectively. All values were corresponded with the criteria ranges requested by CD 2002/657/EC. The application of this method will be helpful in quality control analysis of amino acids in veterinary products.

A laboratory-scale experiment was conducted to evaluate the effect of supplementing commonly used effective microorganisms on the chemical properties of swine liquid manure. Effective microorganisms used in this study were Bacillus subtilis (1.3×109 colony-forming unit (CFU)/ml), Enterococcus faecium (1.9×1010 CFU/ml), Aspergillus oryzae (2.0×109 CFU/ml), Saccharomyces cerevisiae (6.4×109 CFU/ml), Rhodobacter sphaeroides (1.2×108 CFU/ml), and Streptomyces griseus (6.2×108 CFU/ml). Swine liquid manure collected and decanted from a swine farm was used in this study. Treatments included control (distilled water supplementation), Treatment 1 (T1) (mixed microbes, 109 CFU/ml), and Treatment 2 (T2) (mixed microbes, 107 CFU/ml). Microbial mix was supplemented every 3.5 days and aerated six times (15 min each) a day to facilitate compositing. Ten ml of sample was collected at 2-, 4-, 6-, and 7-week intervals for the measurement of pH, ammonia-N, volatile fatty acid (VFA), total nitrogen, total phosphorus, and total potassium. At seven weeks, samples were further collected to analyze biochemical oxygen demand (BOD) and chemical oxygen demand (COD). Ammonia-N was significantly (p<0.05) decreased in T1 and T2 by 36% and 30%, respectively, compared with control (23%). VFAs including butyrate, iso-butyrate, valerate, iso-valerate, and caproate were not detected in T1 from the four-week aerated sample. The BOD and COD were significantly (p<0.05) decreased in T1 by 96% and 58%, respectively. In conclusion, ammonia-N, VFA, BOD, and COD, known as odor indicators, were decreased in T1 and T2 compared with control, suggesting that effective microorganisms are useful for compositing swine liquid manure

To investigate the industrial availability of liquid fermentation (PL-ferment) by Phellinus linteus mycelium as a postbiotics for the inhibition of inflammation, PL-ferment was fractionated into culture supernatant (CS), hot-water extract (HW) from PL-ferment, EtOH-precipitate (CP) fractionated from HW, and the dialysate (DCP) of CP. Compared to the other fractions, DCP which is expected to contain exopolysaccharide (EPS) as the major component, significantly decreased the production of NO, IL-6, and MCP-1 in LPS-induced RAW 264.7 cells, and IL-6 and IL-8 in TNF-α and IFN-γ-induced HaCaT cells. The general component analysis results showed that no significant difference in components was observed between the fractions, whereas sugar composition analysis revealed that DCP had decreased glucose and increased mannose contents compared to the other fractions. This suggests that mannose played an important role in the anti-inflammatory activity of the active fraction, DCP. Molecular weight distribution analysis revealed that DCP was mainly composed of low-molecular-weight material-removed high-molecular-weight polysaccharides of 18–638 kDa, suggesting that EPS originated from P. linteus EPS. In conclusion, our results suggest that the DCP of P. linteus mycelium fermentation using the anti-inflammatory activity could be used industrially as postbiotic material.

본 연구는 국내 유통되는 액상 유제품에 함유된 17종의 과불화화합물 (PFCs) 함량에 대한 모니터링을 위해 수행되었다. 샘플을 액체-액체 추출을 통해 추출하고 LC-MS/ MS로 정량 분석하였다. 시중에 유통중인 98개의 액상 유제품 샘플에서 PFCs의 모니터링을 진행하였으며 그 결과, PFTeDA를 제외한 16종의 PFCs가 검출되었다. 총 PFCs의 함량은 0.9037 ng/mL로 액상 우유에서 가장 높았으며, PFPeA, PFDS, PFHxA도 액상우유에서 0.1 ng/mL 이상의 농도 수준을 보였다. 미국과 이탈리아에서 수행한 연구와 비교했을 때 PFOA와 PFOS의 잔류 패턴은 유사한 것으 로 나타났으며, 농도 수준은 0.1 ng/mL 미만이었다. 액상 유제품은 다양한 가공단계(살균, 혼합, 지방제거 등)를 거쳐 총 PFCs의 함량이 감소하는 것으로 보여지며, 특히 짧은 탄소 사슬을 가진 PFCs가 크게 감소하거나 검출되지 않았다. 이는 식품 안전에서 원료의 PFOS와 PFOA의 잔류정도가 중요하다는 것을 의미한다.

Ti-Al-Si target and Cr-Si target are sputtered alternately to develop a multi-layered nitride coating on a steel mold to improve die-casting lifetime. Prior to the multi-layer deposition, a CrN layer is developed as a buffer layer on the mold to suppress the diffusion of reactive elements and enhance the cohesive strength of the multi-layer deposition. Approximately 50 nm CrSiN and TiAlSiN layers are deposited layer by layer, and form about three μm-thickness of multi-layered coating. From the observation of the uncoated and coated steel molds after the acceleration experiment of liquid metal injection casting, the uncoated mold is severely eroded by the adhesion of molten metallic glass. On the other hand, the multi-layer coating on the mold prevents element diffusion from the metallic glass and mold erosion during the experiment. The multi-layer structure of the coating transforms the nano-composite structured coating during the acceleration test. Since the nano-composite structure disrupts element diffusion to molten metallic glass, despite microstructure changes, the coating is not eroded by the 1,050 oC molten metallic glass.

현재 양송이 종균은 1980년대 개발된 방법으로 제조되고 있어, 양송이 종균 품질 향상을 위한 새로운 제조 방법을 개발하였다. 그 결과 균사체량이 5.92±0.52 g/L로 가장 많이 배양된 CDB(compost dextrose broth) 배지에서 24oC에서 120 rpm으로 진탕 배양(24시간/일) 하는 통기 식(2.5 L/min) 액체배양법으로 배양기간 10일이 액체 접종원 사용으로 양호했으며, 양송이 밀 배지 종균 생산은 밀 배지 50 g당 액체 접종원 1 ml을 적정 접종량으로 하여 10일 배양하면 종균의 뭉침과 흔드는 작업없이 적절하게 배양되었음을 보고한다.