Polyvinyl acetate (PVAc) prepared by emulsion polymerization has broad applications for additive such as paint binder, adhesive for wood and paper due to its low glass transition temperature which help to plasticize substrate resins. Since emulsion polymerization has a disadvantage that surfactant and ionic initiator degrade properties of the product polymer, poly (vinyl acetate-eo-ethyl acrylate) (VAc-EA) was synthesized using potassium persulfate as catalyst and polyvinylalcohol (PVA) as protective colloid to prevent the degradation. The copolymer latex product was internally plasticized and has enhanced adhesion, water resistance during VAc-EA emulsion polymerization. No coagulation and complete conversion occur with the reactant mixture of 10 mmol/L potassium persulfate, 10 mmol/L poly ( vinyl alcohol) (PVA 17). As the concentrations of PVA increase, the viscosity becomes increase.

목적: 최근 소프트 콘택트렌즈는 소재의 연구개발 뿐만 아니라 기능성의 연구개발도 함께 이루 지고 있다. 이에 본 연구는 Ag를 이용하여 항균성을 갖는 기능성 콘택트렌즈를 제조하였다. 방법: 기존 소프트 콘택트렌즈의 재료와 AgNO3을 혼합하여 교반한 후, 70℃에서 약 40분, 80℃에서 약 40분 건조하였다. 마지막으로 100℃에서 약 40분 열처리 공정을 거처 공중합하였다. 결과: 물리적 특성으로는 건조 후와 수화 후의 굴절률은 1.502~1.504와 1436~1.445, 함수율은 34.54%~39.03% 그리고 가시광선 투과율은 79.1%~83.8%를 나타내었다. 결론: 기존 소프트 콘택트렌즈의 소재와 은과의 중합을 통해 콘택트렌즈의 물리적 특성에도 부합되는 폴리머가 생성된 것으로 판단된다.

‘Samkang’ a new variety of oyster mushroom, fitting for the bottle culture, was bred and by mating between monokaryons isolated from MT05433 and AE1-1. In the major characteristics of fruit body, the pilei were thick and dark-gray and the pileistripes were thick and long with softness. It was great in elasticity and cohesivness of tissue as compare to chunchu-1ho. The optimum temperature for the mycelial growth was around 26~28℃ and that for the pinheading and growth of fruitbody was around 14~16℃. In the bottle culture, it was required around 26 days in incubation period and 4 days in primordia formation. The fruit body was grew vital and uniform. The yield were shown by 136.5g/bottle.

Various silanes, amino silane, vinyl silane, sulfur silane (TESPD), and ZS (TESPD/zinc soap complex), are added into chlorinated isobutylene-isoprene copolymer (CIIR)/soft clay/carbon black (CB) and CIIR/hard clay/CB compounds and they are investigated with respect to the vulcanization characteristics, the processability, and the mechanical properties. Comparing hard clay and soft clay filled compounds, hard clay (Suprex) filled system shows a higher die C tear than the soft clay (GK) filled one. The other properties (Mooney, extrusion torque/pressure, torque rise (MH-ML), modulus at 300%) are close to each other. Among various silanes, the ZS treated hard clay (Suprex) compound shows the highest mechanical property following hard clay(S)/vinyl silane(V) and soft clay(GK)/vinyl silane(V) compounds. The TESPD and the ZS effectively helps a formation of a strong 3-dimensional network structure between silica and CIIR via coupling reaction due to bifunctional nature of TESPD. In addition to that, the ZS added compounds show both a better processability and mechanical properties compared to the S2 ones at low concentration due to improved compatibility between zinc soap and CIIR matrix. Only the ZS added compound shows both improved processabilities (Mooney, Extrusion torque-& pressure) and improved mechanical properties (degree of crosslinking, elongation modulus, tear, and fatigue to failure counts) on both CIIR/hard clay/CB and CIIR/soft clay/CB compounds.

Various silanes, amino silane, vinyl silane, TESPD, and ZS (TESPD/zinc soap complex), are added into chlorinated isobutylene-isoprene copolymer (CIIR)/soft clay/carbon black (CB). The vulcanization characteristics, the processability, and the mechanical properties are measured. In soft clay/CB filled CIIR system, there are no significant changes in Mooney viscosity among compounds. Vinyl silane added compound shows a low extrusion torque. All the silane added compounds shows an increased modulus. The mechanical properties are significantly increased when the S2 is added into CIIR/soft clay/CB compounds.

Various silanes, amino silane, vinyl silane, TESPD, and ZS (TESPD/zinc soap complex), are added into chlorinated isobutylene-isoprene copolymer (CIIR)/hard clay/carbon black (CB) compound and they are investigated with respect to the vulcanization characteristics, the processability, and the mechanical properties. In hard clay/CB filled system, only ZS silane added compound shows both lower Mooney viscosity and extrusion torque while vinyl silane added compound showed only a lower extrusion torque. All the ZS added compounds showed the lowest viscosity among them. The silane added compounds showed an increased modulus. In 'fatigue to failure' count test, the ZS added compound showed superior counts compared to other silane (amino, vinyl, TESPD) added compounds. The mechanical properties were significantly increased when the S2 and ZS were added into CIIR/hard clay/CB compound. The ZS added compounds showed a significant improvement on elongation modulus.

Poly(vinyl chloride) (PVC) 주사슬과 poly(hydroxyethyl acrylate) (PHEA) 곁사슬로 구성된 빗살모양의 PVC-g-PHEA 공중합체를 원자전달라디칼 중합을 통해 합성하였다. 이렇게 합성된 PVC-g-PHEA의 OH 그룹과 이미다졸 디카르복실릭산 (IDA)의 COOH 그룹과의 에스테르 반응에 의하여 가교된 전해질막을 제조하였다. 인산(PA)을 도핑하여 이미다졸-인산 착체를 형성한 결과, PA함량이 증가함에 따라 고분자 전해질막의 수소 이온 전도도가 증가하였다. 특히 100도 비가습 조건에서 수소 이온 전도도는 최대 0.011 S/cm까지 증가하였다. 만능 재료 시험기(UTM) 측정결과, 제조된 PVC-g-PHEA/IDA/PA 전해질막은 575 MPa의 높은 Young 모듈러스 및 기계적 강도를 보여주었다. 열분석 결과(TGA) 전해질막은 200℃까지 열적으로 안정함을 확인하였다.

Nanofabrication is an essential process throughout industry. Technologies that produce general nanofabrication, such as e-beam lithography, dip-pen lithography, DUV lithography, immersion lithography, and laser interference lithography, have drawbacks including complicated processes, low throughput, and high costs, whereas nano-transfer printing (nTP) is inexpensive, simple, and can produce patterns on non-plane substrates and multilayer structures. In general nTP, the coherency of gold-deposited stamps is strengthened by using SAM treatment on substrates, so the gold patterns are transferred from stamps to substrates. However, it is hard to apply to transfer other metallic materials, and the existing nTP process requires a complicated surface treatment. Therefore, it is necessary to simplify the nTP technology to obtain an easy and simple method for fabricating metal patterns. In this paper, asnTP process with poly vinyl alcohol (PVA) mold was proposed without any chemical treatment. At first, a PVA mold was duplicated from the master mold. Then, a Mo layer, with a thickness of 20 nm, was deposited on the PVA mold. The Mo deposited PVA mold was put on the Si wafer substrate, and nTP process progressed. After the nTP process, the PVA mold was removed using DI water, and transferred Mo nano patterns were characterized by a Scanning electron micrograph (SEM) and Energy Dispersive spectroscopy (EDS).

Poly(vinyl chloride) (PVC) 주사슬과 poly(hydroxyethyl acrylate) (PHEA) 곁사슬로 구성된 가지형 공중합체를 원자전달라디칼 중합을 통해 합성하였다. PVC의 2차 염소원자의 직접적인 개시반응에 의해 친수성인 PHEA 단량체를 그래프팅시켰다. 이렇게 합성된 PVC-g-PHEA을 술포석시닉산(SA)를 사용하여 가교시켰으며, 이는 가지형 공중합체의 -OH 그룹과 SA의 -COOH와의 에스테르 반응임을 FT-IR 분광법을 이용하여 분석하였다. 이온교환능(IEC)은 SA 함량이 증가함에 따라 계속하여 증가하여 0.87 meq/g까지 도달하였고, 이는 전해질막에 이온 그룹수가 증가하기 때문이다. 하지만, 함수 율은 SA 함량이 20 wt%까지는 증가하다 그 이상에서는 감소하였다. 또한 수소 이온 전도도도 SA 함량에 따라 증가하여 20 wt% SA 농도에서 0.025 S/cm의 최대값을 나타내었고, 이는 SA 함량이 증가함에 따라 이온 그룹의 수가 증가하는 효과와 가교가 증가하는 효과가 서로 경쟁적으로 일어나기 때문으로 사료된다.

This study was surveyed the effects by pollinating activity of Apis mellifera and Bombus terrestris released in the paprika vinyl-houses. The foraging activity and behaviour of A. mellifera and B. terrestris visited on the paprika flowers were nearly alike. The pick times of pollinating activity by A. mellifera and B. terrestris were showed the hightest at 11:00 and 15:00, and 09:00 to 11:00, respectively. The rate of fruit set by A. mellifera and B. terrestris released for pollinating paprika were same level with 94%, and these rate were higher than the fruit setting rate which was 92% by fan operated. The qualities of paprika produced by pollinators released were higher than those by fan operated. And weight per fruit, number of seeds per fruit and economical profit per 2,310 ㎡ were over 10% higher than those by fan operated. Therefore the economical effects by the pollinating activities of A. mellifera and B. terrestris released in the paprika vinyl-houses were obviously demonstrated.

Road-map for the environmental friendly integrated pest management (IPM) of insect pests was drawn up on the strawberry vinyl-houses of farmer’s field. Major insect pests were occurred Tetranychus urticae and Aphis gossypii during the strawberry plant seeding in the vinyl house and open field. Also, same insect pests were occurred in the vinyl house during harvesting season of strawberry. For the control of T. urticae and A. gossypii, Phytoseiulus persimilis and Aphidius colemani as natural enemies were input to the vinyl house, respectively. However, because these natural enemies could not control insect pest populations, acaricide and insecticide were sprayed. Then natural enemies were input again in the vinyl house. Natural enemies could not endure the intense cold and differences of temperature and relative humidity between day and night during strawberry harvesting season. So, their behavior and control activity of pests were more decrease than pests. Firstly, natural enemies are input in the vinyl house during the early breeding season of strawberry, secondly, acaricides and insecticide are sprayed for the control of mites and aphids, respectively, during the middle breeding season in the hard winter. Finally, natural enemies are re-input in the vinyl house during the middle and late breeding season.

폴리스티렌-폴리히드록시에틸 아크릴레이트(PS-b-PHEA) 디블록 공중합체와 폴리비닐알콜(PVA)을 1 : 1 무게비로 블렌딩하여 수소 이온 전도성 가교형 고분자 전해질막을 개발하였다. 특히 술포석시닉산(SA)를 사용하여 디블록 공중합체의 PHEA 블록과 PVA와 가교반응을 시켰고, 이를 FT-IR 분광법을 이용하여 분석하였다. 이온교환능(IEC)은 SA 함량이 증가함에 따라 계속하여 증가하여 0.95 meq/g까지 도달하였고, 이는 전해질막에 이온 그룹수가 증가하기 때문이다. 하지만, 함수율은 SA 함량이 20 wt%까지는 증가하다 그 이상에서는 감소하였다. 또한 수소 이온 전도도도 SA 함량에 따라 증가하여 20 wt% SA농도에서 0.024 S/cm의 최대값을 나타내었다. 함수율과 수소이온전도도의 이러한 경향은 SA 함량이 증가함에 따라 이온 그룹의 수가 증가하는 효과와 가교가 증가하는 효과가 서로 경쟁적으로 일어나기 때문으로 생각된다.

폴리비닐리덴플로라이드(PVDF) 지지체 위에 빗살모양의 술폰화된 공중합체를 코팅하여 나노 분리막을 제조하였다. 빗살모양의 공중합체는 원자전달 라디칼 중합법(ATRP)에 의해 제조하였으며, 폴리비닐클로라이드의 주사슬과 폴리스티렌 술폰산(PSSA)의 곁사슬로 구성되어 있다. 핵자기 공명법(1 H-NMR), FT-IR분광학 그리고 WAXS 분석법에 의해 공중합체가 성공적으로 합성되었음을 확인하였다 PVC-g-PSSA로 구성된 복합 나노 분리막은 PSSA의 함량이 증가함에 따라 플럭스와 배제율 모두 증가하였다. 이러한 성능 향상은 분리막의 술폰산의 함량의 증가로써 설명할 수 있다. PSSA가 71wt%첨가된 나노 복합막의 배제율은 Na2SO4 88%, NaCl 33%을 나타내었고, 플럭스는 Na2SO4 26, NaCl 34 L/m 2 h을 각각 나타내었다.

The actual status of a single span vinyl-house for a institution vegetable cultivation in a main cultivation area was investigated to make good use of the data for developing a structural reinforcement method of single span vinyl-house. The structural stability of single span vinyl-house with a width of 6.0m and high of 3.0m utilized in that area was analyzed by using a three-dimensional visual FEA code. Finally, the optimized structural reinforcement method of pipes with a width of 6.0m which had a roof height of 3.0m was respectively presented. The results showed that the structural reinforcement method of the single span vinyl-house was classified as the model cases from a view point of structural stability. It was secured under the condition of a wind velocity of 40m/s and a snow-depth of 35~55cm, simultaneously.

These experiments were conducted to search for the optimum composition of media material and media size for vinyl bag culture using sawdust. Considering the incubation period and the successful culturing rate, the optimum media size was length 25cm diameter 14cm (weight 2.5kg). The saturation moisture amount of Oak sawdust was 251㎖/100g. It is a half of pine sawdust 495㎖/100g. In 10 treatments of media construction including Oak sawdust 100%, the optimum material mixing rate was Oak sawdust 80%+wheat bran 20% and Oak sawdust 80%+ bran 20% considering the hypha growing speed and hypha density. The optimum moisture amount in media for growing Lentinus edodes was 55%. Injection pipe with 20 holes in media was reduced the incubation periods to 11 days when 20cm length media and 32 days when 30cm length media. The best method for browning media surface was above 10℃ of hematocryal and punching the vinyl bag. This treat could shortened the browning periods to 54 days.

'Sunjung', a new variety of oyster mushroom was bred in Mushroom ResearchInstitute, Gyeonggido Agricultural Research & Extension Services in 2006. This oyster mushroom was bred and cultivated one after mating with monokaryon collected from KME20064 and KME20066. The optimum temperature for the mycelial growth was about 26∼28 and that for the primordia and growth of fruitbody was about 18∼23℃. Compared to the control which took 25 days of incubation period, Sunjung required 21∼ 22days. It grew primordia after developed a lump of mycelium. In the characteristics of fruit body, pileus was infundibuliform of yellow-color and stripe was slender/long shape of white color. The yield was 112.9g/850cc bottle and 275.5g/2kg P.P bag.

These experiments were conducted to search for the optimum composition of media material and media size for vinyl bag culture using sawdust. Considering the incubation period and the successful culturing rate, the optimum media size was length 25cm× diameter 14cm (weight 2.5kg). The saturation moisture amount of Oak sawdust was 251㎖/100g. It is a half of pine sawdust 495㎖/100g. In 10 treatments of media construction including Oak sawdust 100%, the optimum material mixing rate was Oak sawdust 80%+wheat bran 20% and Oak sawdust 80%+ bran 20% considering the hypha growing speed and hypha density. The optimum moisture amount in media for growing Lentinus edodes was 55%. Injection pipe with 20 holes in media was reduced the incubation periods to 11 days when 20cm length media and 32 days when 30cm length media. The best method for browning media surface was above 10℃ of hematocryal and punching the vinyl bag. This treat could shortened the browning periods to 54 days.