Current petrochemical product mainly comes from light olefin, such as ethylene and propylene. these olefins can be obtained as mixture form of olefin/paraffin, which is co-product of naphtha cracking process. However, the mixture of light olefin and paraffin is considerably difficult to separate because they have similar physicochemical properties such as density, boiling point, and molecular weight. Cryogenic distillation is currently utilized, but still suffered from high operating cost. Membrane separation with polyimide-based material is a promising alternative due to its lower energy cost and modular operation. Here, we synthesized composite membrane with metal-organic framework (MOF) based on polyimide exhibiting high permeability and selectivity in propylene/propane separation, as well as simple preparation and high stability.

In this study, finite element (FE) analysis was performed to evaluate the seismic performance of the water treatment plant, which is a major state of the art water treatment plant, to predict tensile cracks and compressive failure. The FE model simulation for two facilities of the water purification plant was made considering the initial conditions, boundary conditions and water effect. For the nonlinear dynamic analysis, seismic analysis was performed using ground acceleration. Tensile cracks and compressive failure are analyzed and the effects on the structures are analyzed. As a result of the analysis, tensile cracks can be predicted to occur in the main structure.

We carried out a dynamic instability assessment of carbon nanotube reinforced composite (CNTRC) and carbon nanotubes/fiber/polymer composite (CNTFPC) skew plates based on the high-order shear deformation plate theory (HSDT). The multiscale interactions between carbon nanotube (CNT) ratios and skew angles on the dynamic instability for various length-thickness ratios are studied using a two-dimensional finite element model developed for this study. The results were verified by those reported in the literature show the interactions between the CNT reinforcement and skew angles in the skew laminate. Numerical examples show the importance of CNT reinforcement when assessing the dynamic instability of CNTRC and CNTFPC skew plates.

A small dam is of hydraulic structures, which is always exposed to risk by flood, and it’s very important to ensure structural safety. A probabilistic analysis, quantifying variable as a risk factor to ensure safety of small dam, identifying its coefficient of variation, which has become increasingly important. In this study, the risk of seepage failure of foundation within a small dam was estimated based on flood scenarios by rainfall quantile. The final compound risk was evaluated combining probabilities, related to seepage failure and flood level. The seepage failure probability was estimated by performing seepage analysis depending on the water level difference between upstream and downstream in small dam. The probable flood level was estimated by considering hydraulic uncertainty associated with channel geometry, and movable gate operation during the flooding season, applied a probable flood considering hydrologic uncertainty evaluated by Bayesian approach. The safety evaluation of small dam with probabilistic-based compound risk expect to use the index for hydraulic structure design in the future.

The aim of this paper is to clarify the structural stability of 30m fly(maximum working radius of 30m) and telescopic boom with composition. In order to reduce the weight and insulate, the boom of special vehicle has a 3-stage telescopic boom of DOMEX960, pocket part of acetal, 2-stage refracting boom of ATOS80, insulation boom of glass fiber composition and effector. In this process, CATIA is applied to create 3D modeling, then ANSYS are performed the structural analysis. The structural analysis is performed for a case where the thickness of the insulating boom of the ATOS 80 is 7[㎜] and the thickness of the insulating boom of the FRP material is 15[㎜] and 16[㎜].

고성능 복합재료는 기존의 소재에 비해 우수한 기계적 물성을 보이며 특히 높은 비강도를 보인다. 복합재료 의 매트릭스로 사용되는 에폭시 수지는 이들의 독특한 화학반응성, 경화반응에 사용되는 경화제의 적절한 조합으로 많은 다양한 특성을 보일 수 있다. 본고에서는 고성능 복합재 구조물 제작에 사용되어온 에폭시 수지 시스템을 소개 하고자 한다. 필라멘트 와인딩 공법에 사용되는 에폭시 수지와 프리프레그 제조에 사용되는 에폭시 수지의 조성과 특 성을 중심으로 설명하였다.

구조용 강재의 용접부는 강재(Base metal, BM), 용접모재(Weld metal, WM), 열영향부(Heat affected zone, HAZ)로 구성된다. 용접부를 구성하는 이들 세 부분의 구조적 성질은 서로 다를 것이므로, 강재의 용접부의 구조 거동은 BM, WM, HAZ로 구성된 복합체의 거동으로 고려할 수 있다. 본 연구에서는 용접부를 구성하는 BM, WM, HAZ 각각의 탄성계수를 나노압입으로 도출하고, 이들의 복합거동(composite action)을 고려한 용접부의 등가탄성계수(equivalent elastic modulus)를 산정하였다.

입자 복합재료는 입자의 형상, 크기 그리고 분포의 산포특성으로 인해 물성치의 편차가 존재하고, 입자 복합재료를 사용 한 시스템의 거동 또한 산포가 존재한다. 하지만 입자의 산포특성을 고려하기 어려우므로 균질화법을 사용하여 시스템의 거 동을 해석하거나 국부영역에서 미세구조를 적용하여 해석한다. 본 연구에서는 입자의 랜덤적 산포특성을 고려하기 위해 RMDFs(random morphology description functions)를 사용하여 랜덤 미세구조를 생성하였고, 단면 1차 모멘트를 사용하여 가우시안 함수의 수(N)와 입자의 산포특성의 관계를 분석하였다. 그리고 랜덤 미세구조 구조물의 거동을 분석하기 위하여 랜덤 미세구조를 전체에 반영한 외팔보에 multi-scale 해석을 수행하였다. 그 결과 입자의 산포특성과 외팔보의 처짐의 편차 는 N의 증가에 따라 감소하고 N=200에서 수렴하는 것을 확인하였다.

본 논문에서는 풍력 블레이드와 같이 세장비가 크고 초기 비틀림이 존재하는 복합재료로 구성된 블레이드에 대한 이차원 단면의 차원축소와 복원관계를 이론적으로 기술하였다. 그리고 VABS 이용한 보의 차원축소모델에 대한 유효성을 검증하기 위해 선행연구 모델을 활용하여 기존 연구결과를 수치적으로 비교하였다. 실물과 가장 가까운 날개 구조물 2차원 형상에 단 면해석을 적용하여 정밀한 단면의 이산화를 수행하고 VABS를 이용하여 블레이드의 특성(질량행렬, 강성행렬)을 포함한 1 차원 보 모델링을 수행하였다. 1차원 보 모델을 통해 세장비가 큰 날개 구조물의 거동을 확인하고 내부하중을 계산하여 단 면위치에서 변형률 복원을 수치적으로 계산하고 이산화된 단면에 수치적으로 매핑하여 시각적으로 확인하고 여유마진을 계 산하였다.

The proposed hybrid damper installs at a coupling beam and consists of a high-damping rubber (HDR) and steel pin. The proposed hybrid damper adopted a pin-lock system acts as a viscoelastic damper under wind load (small displacement) while it behaves as a hysteretic damper under earthquake load (large displacement). In this paper, the pin-lock mechanism and structural performance of the proposed hybrid damper is evaluated through experiment. Experiments were carried out with the variables which displacement, loading frequency and steel pin quantities were used. Test results showed that the pin-lock mechanism and the performance of the hybrid damper under a large displacement were verified. Also equivalent damping ratios of HDR were increasing at a small displacement as displacement amplitudes were increasing. However HDR did not depend on frequency,

This study performed an inverse detection of fiber stiffness degradation that occurs due to damages in free vibrating composite structures. Five unknown parameters are considered to determine the fiber stiffness which is a modified form of the bivariate Gaussian distribution function. The proposed approach is more feasible than the conventional element-based damage detection method from the computational efficiency because a finite element analysis coupled with a genetic algorithm using a small number of unknown parameters is performed. The numerical examples show that the proposed technique is a feasible and practical method, which can prove the location of a damaged region as well as inspect the distribution of deteriorated fiber stiffness although there is a small difference in dynamic characteristics between damaged and undamaged structures.

The new rotary friction damper was developed using several two-nodal rotary frictional components with different clamping forces. Because of these components, the rotary friction damper can be activated by building movements due to lateral forces such as a wind and earthquake. In this paper, various dependency tests such as displacement amplitude, forcing frequency and long term cyclic loading were carried out to evaluate on the structural performance and the multi-slip mechanism of the new damper. Test results show that the multi-slip mechanism is verified and friction coefficients are dependent on displacement amplitute and forcing frequency except long term cyclic loading.