검색결과

검색조건
좁혀보기
검색필터
결과 내 재검색

간행물

    분야

      발행연도

      -

        검색결과 980

        81.
        2020.06 KCI 등재 구독 인증기관 무료, 개인회원 유료
        미로는 컴퓨터 비디오 게임에 매우 자주 사용되는 형태 중의 하나다. 2차원 격자 형태로 표현되는 미로가 가장 대표적이지만 매우 다양한 형태로 사용된다. 많은 게임 애셋들이 그래픽 디자이너에 의해 만들어지지만 알고리즘에 의해 자동화되는 경우도 매우 많다. 특히 최근에는 프로시저럴 게임 애셋 생성 방법이 각광을 받으며 게임 애셋의 제작에 있어 생산성이 높아질 수 있게 되었다. 제안된 연구에서는 그동안 2차원 미로 생성에 제한되어 있어서 자동화 방법을 3차원 그래픽으로 확장하고자 한다. 2차원 미로 생성 방법은 컴퓨터 사이언스에서 오래된 주제인다. 게임에서는 주로 던전이나 레벨 생성에 주로 사용되고 있다. 최근의 미로에 관련된 연구는 이미지나 사진을 기반으로 이와 닮은 형태의 미로를 생성하는 방법과 이에 대한 사용자 컨트롤, 스타일 생성 등에 대해 이루어지고 있다. 본 연구에서는 이에 대한 3차원 확장으로써 미로 자동 생성 시스템을 제안한다. 경로 생성과 3차원 벽 모델의 생성은 PCG(Procedural Contents Generation)로 이루어지며 미로의 생성 밀도나 형태 제어, 불연속성 제어 등은 사용자가 개입할 수 있는 형태로 구현되었다. 또한 사용자가 지정한 출발, 도착 지점 셀간의 해답 경로를 자동으로 생성하여 준다. 제안된 시스템은 이러한 기능들을 대화형 작업 속도로 지원한다.
        4,000원
        82.
        2020.04 KCI 등재 구독 인증기관 무료, 개인회원 유료
        지구상에서 가장 오래된 해양 미세조류로 알려진 스피룰리나는 인체에 필요한 영양성분을 대부분 함유하고 있는 것으로 알려져 있다. 그 구성성분으로는 phycocyanin, chlorophyll, β-carotene과 같 은 다양한 물질을 다량 함유한다고 보고되고 있으며, 노화 및 미백효과가 있다고 알려져 있다. 본 연구에서 는 스피룰리나 정제수 추출물의 UVB로 유도된 활성산소종 ROS (reactive oxygen species) 소거능과 항산 화능을 확인하였다. 스피룰리나 정제수 추출물 0.05, 0.10, 0.50 1.0 mg/mL의 DPPH 라디칼 소거능, FRAP 환원능 및 ABTS+ 라디칼 소거능을 측정하여 항산화효과를 확인하였다. 대체실험동물모델인 Zebrafish를 이용하여 스피룰리나 정제수 추출물을 0.05, 0.10, 0.50 mg/mL 농도로 처리하여 응고율, 부 화율, 심장독성을 측정하였으며, 스피룰라나 추출물을 0.05, 0.10, 0.50 mg/mL 농도로 처리한 후, DCFH-DA로 염색하여 UVB로 유도된 ROS 저해효과를 확인하였다. 항산화효과 측정 결과 양성대조군인 ascorbic acid와 비교시 DPPH, Frpa, ABTS 모두 농도 의존적으로 항산화 효과가 있음을 확인하였다. 대체 실험동물인 Zebrafish를 이용하여 응고율과 부화율, 심박수를 측정한 결과 0.5 mg/mL을 제외한 0.05, 0.10 mg/mL에서는 대조군과 비교 시 독성이 없음을 확인 하였다. UVB로 유도된 Zebrafish의 ROS 소거 능은 양성대조군에 비해 높은 ROS 감소 효과를 나타내었다. 본 연구의 결과는 스피룰라나 정제수 추출물 이 자외선 및 피부 보호 화장품 소재로 사용가치가 있음을 시사한다.
        4,000원
        83.
        2020.03 KCI 등재 구독 인증기관 무료, 개인회원 유료
        Seismic qualification of instruments and devices mounted on electrical cabinets in a nuclear power plant is performed in this study by means of the in-cabinet response spectrum (ICRS). A simple method and two rigorous methods are proposed in the EPRI NP-7146-SL guidelines for generating the ICRS. The simple method of EPRI can give unrealistic spectra that are excessively conservative in many cases. In the past, the time domain analysis (TDA) methods have been mostly used to analyze a structure. However, the TDA requires the generation of an artificial earthquake input motion compatible to the target response spectrum. The process of generating an artificial earthquake may involve a great deal of uncertainty. In addition, many time history analyses should be performed to increase the accuracy of the results. This study developed a numerical analysis program for generating the ICRS by frequency domain analysis (FDA) method. The developed program was validated by the numerical study. The ICRS calculated by FDA thoroughly matched with those obtained from TDA. This study then confirms that the method it proposes can simply and efficiently generate the ICRS compared to the time domain method.
        4,000원
        84.
        2019.12 KCI 등재 구독 인증기관 무료, 개인회원 유료
        Process mining is an analytical technique aimed at obtaining useful information about a process by extracting a process model from events log. However, most existing process models are deterministic because they do not include stochastic elements such as the occurrence probabilities or execution times of activities. Therefore, available information is limited, resulting in the limitations on analyzing and understanding the process. Furthermore, it is also important to develop an efficient methodology to discover the process model. Although genetic process mining algorithm is one of the methods that can handle data with noises, it has a limitation of large computation time when it is applied to data with large capacity. To resolve these issues, in this paper, we define a stochastic process tree and propose a tabu search-genetic process mining (TS-GPM) algorithm for a stochastic process tree. Specifically, we define a two-dimensional array as a chromosome to represent a stochastic process tree, fitness function, a procedure for generating stochastic process tree and a model trace as a string of activities generated from the process tree. Furthermore, by storing and comparing model traces with low fitness values in the tabu list, we can prevent duplicated searches for process trees with low fitness value being performed. In order to verify the performance of the proposed algorithm, we performed a numerical experiment by using two kinds of event log data used in the previous research. The results showed that the suggested TS-GPM algorithm outperformed the GPM algorithm in terms of fitness and computation time.
        4,200원
        85.
        2019.12 KCI 등재 구독 인증기관 무료, 개인회원 유료
        컴퓨터 게임에서 목표 위치로 이동할 때, NPC(non-player character)는 그 위치까지의 경로 탐색을 수행한다. 경로 탐색이 수행되는 동안, NPC는 실제 이동을 시작하기 전에 그 탐색 결과를 기다려야한다. 이것은 수백 개의 에이전트나 커다란 그래프를 갖는 게임에서는 한정된 CPU 자원으로 전체 경로 탐색 요청을 처리하는데 소요되는 시간이 길어져서 이러한 접근법이 게임 진행을 더디게 만든다. 경로 탐색에 할당되는 CPU 자원을 한정하여 전체 게임진행은 원활하게 할 수 있지만, 제한된 경로탐색 시간을 다수의 NPC가 나누어 사용해야 한다. 제한된 검색 시간으로 지연이 너무 길어지면, NPC는 막연하게 기다리거나 벽이나 다른 장애물로 목적 없이 진행하게 된다. 이런 경우 해결 방법 중의 하나는 완성된 경로를 기다리기 전에 NPC가 목표 위치까지의 부분 경로를 조기에 결정하는 것이다. 즉, 사용자가 정의한 수의 검색 사이클이나 검색 깊이가 도달 된 후에는 목표에 가장 가까운 노드에 이르는 경로를 반환하도록 A* 알고리즘을 변경하는 것이다. 그러면 NPC는 완전한 경로가 만들어질 때까지 이 부분경로를 따라가고 그 사이에 도착하는 전체 경로를 반영하여 최종 목적지에 도착할 수 있다. 실험을 통해 부분 경로를 생성했을 때, 실시간 게임에서 훨씬 더 사실감을 증대시키는 효과가 있음을 확인하였다.
        4,000원
        89.
        2019.10 KCI 등재 구독 인증기관 무료, 개인회원 유료
        층류 경계층 내 반구에 의해 유기되는 말굽와류를 흡입 제어했을 때 후류영역에서의 마찰저항 변화를 측정하였다. 이를 위해 회류수조에서 유동가시화를 실시하여 최적의 자유유속, 반구 크기 및 흡입제어 구멍 크기를 결정하였고, 반구 후류영역에 설치된 평판과 연결된 동력계로 표면 마찰저항 감소를 측정하는 실험을 수행하였다. 평판에 설치된 반구 전방에는 유입 유동에 의해 반구를 감싸는 말굽와류가 생성되며 그 주위 와도 방향에 의해 후류영역으로는 빠른 유속의 유동이 유입되어 머리핀 와류 생성을 촉진시킨다. 따라서 반구 전방에 생성되는 말굽와류 세기를 흡입 제어에 의해 약화시킴으로써 반구 좌우측으로 길게 형성된 유속방향 와류가 후류영역으로 공급하는 에너지는 감소하게 된다. 즉, 반구 전방의 말굽와류를 제어함으로써 후류영역으로부터 생성되는 헤어핀 와류 발생 주파수가 줄어 들게 된다. 염료 주입을 이용한 유동 가시화 영상을 해석한 결과로 머리핀 와류의 발생 빈도가 흡입제어에 의해 36.4 % 감소되었고, 후류 영역에서 측정된 표면 마찰저항은 2.3 % 감소되는 것으로 나타났다.
        4,000원
        90.
        2019.10 KCI 등재 구독 인증기관 무료, 개인회원 유료
        본 연구에서는 국내외 저탄소 녹색성장을 위한 대안으로서 수소에너지와 그 이용 기술에 대한 관심이 높아지는 추세에 발맞춰 무탄소 연료인 수소를 LNG 의 주성분인 메탄, 메탄-프로판, 메탄-프로판-에탄 동축류 확산화염 내에 첨가하여 화염형상 및 연소생성물에 미치는 영향을 확인하였다. 상온상압 조건의 확산화염에 수소를 단계적으로 첨가하여 실제 생성되는 연소생성물의 변화 추이를 가스 분석기를 이용하여 실험적으로 관찰하였고 확산화염의 형상은 디지털카메라를 이용하여 단계적으로 관찰 하였다. 실험결과에서 확산화염에 수소를 첨가함에 따라 질소산화물의 생성량이 선형에 가깝게 증가하는 경향을 보였다. 이것은 수소의 상대적으로 높은 단열화염온도와 빠른 연소속도가 Thermal NOx의 생성을 촉진했기 때문이다. 반면 이산화탄소의 생성량은 감소하는 경향이 나타났는데 수소를 첨가함에 따라 메탄, 메탄-프로판, 메탄-에탄-프로판의 혼합 확산화염에 포함되어있는 전체 탄소비율이 줄어들어 이산화탄소의 생성량이 감소한 것이다. 이는 선박에서 LNG-수소의 혼합 연료사용으로 인해 온실가스인 이산화탄소를 저감할 수 있는 하나의 방안으로 고려될 수 있다는 것을 의미한다.
        4,000원
        94.
        2019.08 KCI 등재 구독 인증기관 무료, 개인회원 유료
        In this study, the experiments and analyses were carried out in order to investigate the fracture characteristics on the adhesive at the specimen bonded with aluminum and aluminum-foam. The same conditions were given for the experiments and analyses. The results are investigated by the graph of reaction force according to displacement. It was found that the experimental and the analytical data were very similar to each other. On the basis of the data, the reliability of the analysis data could be confirmed. The notches were produced at the distances of 40, 110, 150, and 190 mm from the front of the test specimen, and the maximum reaction force was compared accordingly. It was found that the highest reaction force was generated at the front end of the adhesive and the lowest reaction force was found at the middle of the adhesive interface. Finally, when the equivalent stress in the test specimen was examined, it was found that the highest stress was obtained at the distance of 110 mm. It can be deduced. As the notch formation point are similar to the point when stress is dispersed as the adhesive is peeled off, it is possible to infer the high stress compared to other test specimens.
        4,000원
        95.
        2019.08 KCI 등재 구독 인증기관 무료, 개인회원 유료
        In this study, we investigated the properties of adhesive materials with different lightweight materials such as CFRP and Al-foam. The specimens were tested and analyzed using DCB (Double Cantilever Beam) specimens. In order to secure the reliability of the finite element method, the test and analysis were carried out, and the reliability of the finite element method was secured by using the graph of reaction force to displacement based on the experiment and analysis. The study on the adhesive failure characteristics according to the position of notch hole proceeded. Notch holes were generated at the locations of 40, 110, 150 and 190 mm from the beginning of the specimen near the bonding interface, and the analysis conditions used were the same as those used for securing reliability. The obtained study results are compared with reaction force and equivalent stress. In the case of reaction force, the overall tendency is similar but the difference in maximum reaction force is found. It was found that higher reaction forces appeared at the beginning than at the end of the bonding interface. When the equivalent stresses in the specimens were examined, the value of CFRP was seen to be 30 times higher as much as that of Al-foam.
        4,000원
        96.
        2019.07 KCI 등재 SCOPUS 구독 인증기관 무료, 개인회원 유료
        Zinc oxide(ZnO) micro/nanocrystals are grown via thermal evaporation of ZnO powder mixed with Mn powder, which is used as a reducing agent. The ZnO/Mn powder mixture produces ZnO micro/nanocrystals with diverse morphologies such as rods, wires, belts, and spherical shapes. Rod-shaped ZnO micro/nanocrystals, which have an average diameter of 360 nm and an average length of about 12 μm, are fabricated at a temperature as low as 800 °C due to the reducibility of Mn. Wireand belt-like ZnO micro/nanocrystals with length of 3 μm are formed at 900 °C and 1,000 °C. When the growth temperature is 1,100 °C, spherical shaped ZnO crystals having a diameter of 150 nm are synthesized. X-ray diffraction patterns reveal that ZnO had hexagonal wurtzite crystal structure. A strong ultraviolet emission peak and a weak visible emission band are observed in the cathodoluminescence spectra of the rod- and wire-shaped ZnO crystals, while visible emission is detected for the spherical shaped ZnO crystals.
        4,000원
        97.
        2019.06 KCI 등재 구독 인증기관 무료, 개인회원 유료
        This study is focused on effects of factors that affect the formation of THMs during chlorination in drinking water treatment. During the chlorination, chlorine consumption is increased by increasing the initial chlorine dose, the pH and the total dissolved solid (TDS) concentration. Also THMs formation is increased up to 58.82 μg/L and 55.54 μg/L by increasing initial chlorine concentration and increasing pH. However, concentration of chloroform is decreased by increasing TDS concentration. This is caused the cation(Na+) of the total dissolved solids preferentially reacts with the functional groups of the organic material which influence the trihalomethane formation. But total trihalomethane formation is increased up to 127.46 μg/L by Br- contained in the total dissolved solids. DOC reduction was not influenced by any of the factors.
        4,000원
        98.
        2019.06 KCI 등재 구독 인증기관 무료, 개인회원 유료
        최근 디지털 콘텐츠 중 E-Book과 웹 소설이 증가하고 있다. 삽화는 텍스트 콘텐츠에서 독자의 이해를 도울 수 있다. 따라서 텍스트 콘텐츠를 분석하여 자동으로 삽화를 생성하는 여러 접근방법이 등장했다. 먼저 규칙 기반 접근방법은 문장을 분석하는 규칙과 분석된 문장 구조를 삽화로 변환하는 규칙을 모두 활용하여 삽화를 생성한다. 그러나 정해진 규칙에서 벗어나면 삽화를 생성하지 못 할 수도 있다는 단점이 있다. 다음으로 통계 기반 접근방법은 통계를 기반으로 후보 중 가장 가능성이 높은 삽화를 생성한다. 그러나 통계 기반 접근방법은 사람이 추출한 정보에 강하게 의존한다는 단점이 있다. 본 연구는 사람이 아닌 시스템이 자동으로 정보를 추출하는 딥러닝을 활용한 삽화 생성 시스템을 제안한다. 제안하는 시스템은 형태소 분석기, 개체명 인식기, 의존 구문 구조 분석기로 이루어져있다. 동화 "빨간모자"를 통해 평가하였고, 총 99문장 중 삽화 생성이 가능한 문장이 28문장, 삽화 생성이 불가능한 문장이 71문장이었다. 삽화 생성이 불가능한 문장의 경우 대사가 41문장, 불명확한 주어가 2문장, 그리고 표현이 불가능한 서술어가 28문장이었다. 제안하는 시스템이 올바른 삽화를 생성한 문장은 23문장, 부적절한 삽화를 생성한 문장은 2문장, 삽화를 생성하지 않은 문장은 74문장으로 나타났다.
        4,000원
        100.
        2019.01 KCI 등재 SCOPUS 구독 인증기관 무료, 개인회원 유료
        Indirect oxidation using chlorine species oxidizing agents is often effective in wastewater treatment using an electrochemical oxidation process. When chlorine ions are contained in the wastewater, oxidizing agents of various chlorine species are produced during electrolysis. In a ballast water management system, it is also used to treat ballast water by electrolyzing seawater to produce a chlorine species oxidizer. However, ballast water in the brackish zone and some wastewater has a low chlorine ion concentration. Therefore, it is necessary to study the chlorine generation current efficiency at various chlorine concentration conditions. In this study, the chlorine generating current efficiency of a boron-doped diamond(BDD) electrode and insoluble electrodes are compared with various chloride ion concentrations. The results of this study show that the current efficiency of the BDD electrode is better than that of the insoluble electrodes. The chlorine generation current efficiency is better in the order of BDD, MMO(mixed metal oxide), Ti/RuO2, and Ti/IrO2 electrodes. In particular, when the concentration of sodium chloride is 10 g/L or less, the current efficiency of the BDD electrode is excellent.
        4,000원
        1 2 3 4 5