검색결과

검색조건
좁혀보기
검색필터
결과 내 재검색

간행물

    분야

      발행연도

      -

        검색결과 324

        101.
        2014.06 KCI 등재 구독 인증기관 무료, 개인회원 유료
        최근 자원과 에너지를 절약하고 효과적으로 사용하여 환경 훼손을 줄이고 청정에너지를 이용할 수 있는 기술의 연구가 활발하게 진행되고 있다. 이와 관련 하여, 친환경적이고 경제적이며 독성이 거의 없는 초임계 유체가 물질의 합성과 프로세스에 많이 응용되고 있다. 이산화탄소는 낮은 임계온도와 압력, 가격 경쟁력 그리고 무독성 등의 장점을 가짐으로써 초임계 공정에 많이 사용되고 있는 용매 중에 하나이다. 그러나 분자량이 높은 고분자들에게는 낮은 용해력이 단점으로 있어서 사용에 제한적이다. 따라서, 분자량이 높은 고분자를 용해하기 위해선 하이드로카본 계열의 용매를 사용하여야 한다. 본 연구에서는, 초임계 유체를 이용하여 Poly (methyl methacrylate)/클레이 나노 복합체 제조에 관한 연구를 진행 하였다. 또한, 초임계 유체 내에서 분산성을 극대화 할 수 있도록 Na+-MMT 클레이 표면을 플로린 계열의 surfactant로 개질 시키어 복합체 제조에 응용 하였다. 개질된 클레이를 이용하여 제조 된 복합체는 neat Poly (methyl methacrylate)보다 향상된 기계적, 열적 특성을 보였으며, 제조 된 복합체는 X-ray 회절 방법, 열적 안정성 그리고 TEM 으로 나노 클레이의 분산성을 분석 하였다.
        4,000원
        102.
        2014.06 KCI 등재 구독 인증기관 무료, 개인회원 유료
        The purpose of this study is to investigate information on performance of ventilation in high-tech microelectronicscleanrooms using computational fluid dynamics (CFD). One liquid crystal display (LCD) company was examinedfor evaluating the relationship between workplace concentration and ventilation rate efficiency by using CFDsoftware, Airpak 3.0v. Acetone concentration in cleanroom for final packing process, which is inspected LCD was40.1ppm (GSD 1.91) (n=55) as geometric mean, ranged 7.8~128.7ppm and weakly correlated with ventilationrate efficiency (R²=0.37, p<0.01). Resulting from computational fluid dynamics (CFD), acetone concentrationcan be reduced 62% when install booth type local exhaust system, the most efficient way among 10 other differentventilation methods like increasing volume of general ventilation, changing the location of workers, supply orexhaust diffusers and install downstream type local exhaust system, etc. We found that volitile organic compoundsin cleanroom can be a matter of adverse health effects and the concentration was correlated with ventilation rateefficiency. The most optimized plan to control the contaminants in solvent cleaning work in cleanroom was boothtype local exhaust system.
        4,000원
        103.
        2014.04 KCI 등재 구독 인증기관 무료, 개인회원 유료
        This paper presents the theoretical analysis for the flow driven by surface tension and gravity force in an inclined circular tube. The present study introduces detailed mathematical procedures for Casson viscosity model. The equations of velocity distribution and flow rate are developed to describe the displacement of a non-Newtonian fluid that continuously flew into a circular tube by surface tension. The equation of modified volumetric flow shows the complicated form of (10) due to yield stress term, and the equation of velocity distribution which includes the yield stress and inclination angle of circular tube is composed of terms of r and rc as form of (14).
        4,000원
        104.
        2014.03 KCI 등재 구독 인증기관 무료, 개인회원 유료
        최근 낮은 표면장력, 높은 확산계수, 가스와 같은 낮은 점도, 그리고 액체와 유사한 밀도를 갖는 초임계 유체의 장점을 이용하여 여러 가지 물질의 합성이나 응용 공정에 초임계 유체를 이용하고 있다. 초임계 유체를 이용하여 복합체 제조 시 기존의 용융공정에 비해서 분자들의 움직임이 활발하게 이루어 질 수 있어서 물성의 향상을 기대할 수 있다. 또한 클레이가 고농도로 함유된 마스터 배치를 쉽게 제조할 수 있으며, 기존의 유기 용매를 사용하여 복합체를 제조할 때보다 잔존 용매를 쉽게 제거할 수 있다는 장점을 가지고 있다. 따라서 본 연구에서는 이러한 초임계 이산화탄소를 이용하여 폴리에틸렌옥사이드/클레이 나노복합체를 제조하였다. 또한 본 연구의 목적은 초임계 상태에서 분자들의 활발한 움직임을 기대할 수 있으므로 고분자가 용해되고 클레이 층상으로 효과적으로 삽입되어 복합체의 열적 특성 및 다른 여러 가지 물성을 증가시키는 데 있다. 복합체 제조 후 XRD, TGA, 그리고 DSC를 이용하여 복합체의 특성을 분석 했다. 그 결과 용융방법으로 제조한 복합체보다 열 안정성이 향상되었으며, 클레이 층상 거리도 더 많이 벌어짐을 확인할 수 있었다.
        4,000원
        105.
        2014.02 KCI 등재 구독 인증기관 무료, 개인회원 유료
        A 2D axisymmetric numerical analysis was performed to study the characteristics of charge process inside solar thermal storage tank. The porosity and heat transfer coefficient of filler material as well as inlet velocity of heat transfer fluid are selected as simulation parameters. The porosity is varied as 0.2, 0.5, and 0.8 to account for the effect of filler granule geometry. Two levels of the heat transfer coefficient is adopted to assess the heat transfer between heat transfer fluid and filler material. The inlet velocity is varied as 0.00278, 0.0278, and 0.278m/s. As both of the porosity and the heat transfer coefficient increase, the discrepancy of the temperature distributions between the filler and heat transfer fluid decreases. As the inlet velocity increases, the penetration depth of the heat transfer fluid increases proportionally.
        4,000원
        106.
        2013.12 KCI 등재 구독 인증기관 무료, 개인회원 유료
        A three dimensional numerical analysis was performed to study the cooling performance of xEV battery module depending on cooling fluid inlet position. Depending on the inlet position from the top, case 1 (top inlet), case 2 (middle inlet), and case 3 (bottom inlet) are selected. For the case 1, the temperature of the battery near inlet was higher than that of the battery near outlet. For the case 2 and 3 the temperature of the battery near inlet was lower than that of the battery near outlet. From the analysis result, the cooling performance is higher in the order of case 2, case 3, and case 1.
        4,000원
        107.
        2013.12 KCI 등재 구독 인증기관 무료, 개인회원 유료
        A 2D axisymmetric numerical analysis was performed to study the characteristics of charge process inside solar thermal storage tank. The interfacial area density and inertial resistance of filler material are selected as simulation parameters. The interfacial area density is varied as 800, 2000, and 4000 1/m. The inertial resistance is varied as 1, 3, and 5 1/m. When the interfacial area density increases from 800 to 4000 1/m, the discrepancy of the temperature distributions between the filler and heat transfer fluid decreases. As inertial resistance increases from 1 to 5, both of the temperature and fluid flow pattern changes considerably.
        4,000원
        109.
        2013.10 구독 인증기관·개인회원 무료
        Use of conidia or spores of entomopathogenic fungi are influenced by environmental conditions such as temperature and relative humidity and caused slow and fluctuation of mortality. In addition, although the fungi have the advantage of a restricted host range, this specificity is one of the limiting factors for their use. These factors are preventing wider application and use of these biocontrol agents. To mitigate such problems we selected an Beauveria bassiana Bb08 which kill green peach aphid with its liquid culture filtrate. In this study we conducted bioassay with the fungal culture filtrate and culture fluid to greenhouse pests such as cotton aphid, whitefly and thrips. Culture fluid showed high mortality against green peach aphid, as well as cotton aphid, sweet potato whitefly, and western flower thrips. However, control effect of culture filtrate varied with pests. Culture filtrate showed high mortality to cotton aphid. Mortality of western flower thrips with culture filtrate was slower than culture fluid including spores and sweet potato whitefly was much lower. These results indicated that the culture fluid of Beauveria bassiana Bb08 has potential to simultaneously control various greenhouse pests.
        110.
        2013.09 구독 인증기관 무료, 개인회원 유료
        An uterus is female reproductive tract organ that affected estrus cycle. During a various changes occur at uterus in estrus cycle, one of them is body fluids secretion be called uterine fluid. Therefore, the objective of this study was to investigate the changes of protein patterns using two-dimensional gel electrophoresis in uterus fluids during the follicular and luteal phases in estrus cycle of pigs. In changes of protein spots were confirmed during the follicular and luteal phases. The 136 spots were expressed in follicular phase, the 57 spots of them showed reproducibility. On the other hand, the 140 spots were expressed in luteal phase, the 73 spots of them showed reproducibility. Also, spots expressed in follicular phase were number 69 and 94 spots and spots expressed in luteal phase only were number 156, 157, 184~187, 190 and 191 spots. The spots which of higher expression levels in the luteal phase than in follicular phase were number 76 and 79 spots. In conclusion, the spots expressed in follicular and luteal phases were confirmed with difference levels and these differences are function of RNA resolving, protein synthesis and cytoskeletal architecture.
        4,000원
        111.
        2013.08 KCI 등재 구독 인증기관 무료, 개인회원 유료
        광역방제기의 송풍팬은 방제성능을 좌우하는 핵심 부품으로서 구조적으로 안전성이 확보되어야 한다. 따라서, 대풍량 축류식 송풍기의 알루미늄 축류팬의 안전한 운용을 위해, 축류팬 블레이드에 대해 3차원 전산유동해석과 구조상호해석을 실행하여 축류팬의 요구수명을 만족할 수 있는 개선된 축류팬을 제시하고자 하였다. 이에 제1 보에서는 유동해석과 구조해석을 통하여 기존의 일체형 모델의 안전성을 검토하였는데, 그 결과 축류팬의 기계적 강도가 다소 미흡하여 무한수명을 보장할 수 없음이 판단되어 개선 설계가 절실히 요구되었다. 제2 보의 개선된 설계에서는 축류팬의 각 블레이드를 허브에 조립하여 응력을 분산시킴으로써 등가응력 수준을 반감시킬 수 있었다. 개선모델의 경우 유동저항에 의한 압력분포와 원심력으로부터 예측된 최대 등가응력(74.21MPa)이 소재 항복강도의 1/2 이하로 저감되었고, 내구수명해석을 통해 알루미늄 합금 소재의 무한 피로한도를 보장할 수 있을 것으로 예상되었다. 또한 제1 모드 고유 진동수가 105.62 Hz로서 공진현상은 발생하지 않을 것으로 예상되어 안전한 설계임을 확인할 수 있었다.
        4,000원
        112.
        2013.08 KCI 등재 구독 인증기관 무료, 개인회원 유료
        광역방제기의 송풍팬은 장비의 안전성과 방제성능을 좌우하는 핵심 부품으로서 구조적으로 안전성이 확보되어야 한다. 본 연구에서는 광역방제기에 사용되는 축류식 송풍기의 안전한 운용을 위해, 알루미늄 축류팬 블레이드에 대한 3차원 전산유동해석과 구조상호해석을 실행하여 축류팬의 요구수명을 만족할 수 있는 개선된 축류팬을 제시하고자 하였다. 이에 제1 보에서는 유동저항과 회전력에 의해 발생하는 최대등가응력 값을 구조해석을 통하여 축류팬 재질의 기계적 피로강도와 비교하여 기존모델의 안전성을 검토하고자 하였다. 송풍기 작동 시 발생하는 최대 등가응력값(138.68 MPa)은 축류팬 알루미늄 소재(AC3A, 413.0-F)의 항복강도(145 MPa)에 근접한 값으로 축류팬의 기계적 강도가 다소 미흡하였고, 내구수명은 1.24~11.15×106 회(최대 90시간)으로 분석되었다. 따라서 피로강도의 산포를 고려할 때, 관행기존 설계의 축류팬에 대한 무한수명을 보장할 수 없으며 개선 설계가 요구되었다.
        4,200원
        113.
        2013.08 KCI 등재 구독 인증기관 무료, 개인회원 유료
        This paper presents the theoretical analysis for the flow driven by surface tension and gravity force in an inclined circular tube. The governing equation is developed to describe the displacement of a Newtonian fluid that continuously flew into a circular tube by surface tension, which represents a second-order, nonlinear, nonhomogeneous and ordinary differencial form. It was found that the theoretical predictions of the governing equation were excellent agreement with the unsteady state solutions for horizontal tube and the results of force balance equation for steady state.
        4,000원
        114.
        2013.06 KCI 등재 구독 인증기관 무료, 개인회원 유료
        소각로 내 공기 주입은 연소가스의 체류시간, 미연분 제거 및 출구가스 온도 제어 등의 많은 영향을 끼친다. 이에 따라 2차 연소용 공기량을 변화시켜 충분한 체류시간을 확보하고 850℃ 이상의 출구가스 온도를 유지하며, 높은 turbulent를 관리함으로써 안정적인 소각로 운영이 되어야만 한다. 본 연구에서는 현재 운영 중인 소각장의 소각로를 설계하고, 평균 일일 소각량을 바탕으로 1차 공기량을 산정한 후 2차 공기량을 변화하여 CFD 프로그램(Fluent)을 통해 이론적인 공기유동을 규명하였다. 또한 산정된 공기량을 바탕으로 실제 운영 중인 소각장에 적용함으로써 최적의 연소조건을 도출하였다. CFD simulation 결과 1.2차 공기비는 75:25가 최적의 결과로 나타났으며, 2차 공기 분사노즐 전 후면 유속 비는 1:3에서 가장 우수한 결과로 나타났다. 또한, 실제 운영 중인 소각로에 적용한 결과 적절한 소각로 출구온도는 질소산화물 제거 효율 및 일산화탄소 발생농도에 영향을 미치는 것으로 나타났다.
        4,500원
        115.
        2013.06 KCI 등재 구독 인증기관 무료, 개인회원 유료
        회전하는 수조에서 나타나는 순압성 소용돌이의 패턴과 구조 회전에 대한 연구를 수행하였다. 소용돌이는 수면 위에 접촉된 원판을 수조에 대해 상대적으로 회전시키는 방법을 통해 만들어졌다. 회전원판의 크기, 회전방향, 회전속력에 따라 트라이폴라 소용돌이, 삼각형 소용돌이, 사각형 소용돌이, 커다란 원형 소용돌이가 안정하게 나타났고, 모양이 계속 변하는 불안정한 소용돌이도 나타났다. 회전원판과 수조 벽 사이의 간격이 안정한 소용돌이의 패턴에 큰 영향을 주었고 불안정한 소용돌이는 원판이 시계방향으로 빠르게 회전할 때 주로 나타났는데, 그 원인은 원심력적 불안정성이었다. 한편, 트라이폴라 소용돌이에서 나타난 전체 패턴의 구조적 회전 각속도는 원판 가장자리의 선속도에 비례하였고, 고기압성 트라이폴라 소용돌이가 저기압성 보다 더 큰 구조 회전 각속도를 가졌다. 로스비 수와 구조회전의 관점에서 볼 때, 해양에서 발견된 트라이폴라 소용돌이와 본 실험에서 나타난 트라이폴라 소용돌이는 유사하였다.
        4,000원
        116.
        2013.06 KCI 등재 구독 인증기관 무료, 개인회원 유료
        최근 국내에 많이 보급되고 있는 이류체 포그 냉방시스템의 효율적인 제어알고리즘을 개발하기 위하여 다양한 조건의 분무사이클을 설정하여 토마토재배 온실에서 냉방실험을 실시하였다. 냉방효과는 평균 1.2~4.0℃를 보였고, 냉방효율은 평균 8.2~32.9%로 나타났다. 분무간격에 따른 실험에서 90초 분무사이클의 냉방효율이 가장 높았고, 대체로 분무시간이 길수록, 정지시간이 짧을수록 냉방효율이 높게 나타났다. 이류체 포그시스템의 분무량이 증가할수록 냉방효율이 높아지는 경향을 찾을 수 있었다. 그러나 분무량을 증가시키더라도 내부공기가 포화상태에 가까워지면 더 이상 증발이 일어나지 않으므로 내부공기가 포화상태에 도달하기 전까지 분무량을 증대시키는 방법으로 냉방효율을 높일 수 있을 것으로 판단된다. 냉방효율이 증가함에 따라 실내공기의 포차는 감소하였고 실내외 절대습도 차이는 증가하는 경향을 보였다. 포그의 증발량이 증가할수록 실내와 실외의 절대습도 차이는 커지고, 이에 따라 환기에 의한 수증기 배출이 잘 되어 다시 증발효율을 상승시키므로 냉방효율이 높아지는 순환구조를 갖게 되는 것으로 판단된다. 분무시간과 정지시간에 따른 실내공기의 포차변화를 회귀분석한 결과 10g·kg-1의 포차 변화에 필요한 분무시간은 120초, 정지시간은 60초로 나타났다. 그러나 온도의 진동폭을 줄이고 냉방효율을 높이기 위해서는 포차의 변동범위를 5g·kg-1으로 설정하여 60초 분무, 30초 정지가 더 적당할 것으로 판단된다. 이류체 포그시스템의 제어방식을 컴퓨터 제어시스템과 현재 보급되고 있는 간편제어시스템으로 분류하여 제어알고리즘을 유도하였다. 자연환기 온실에서 간편 제어시스템을 사용한다면 분무사이클을 60초 on, 30초 off로 설정하고 온도하한은 30~30~32℃, 습도상한은 85~90%로 설정할 것을 제안한다.
        4,000원
        117.
        2013.04 KCI 등재 구독 인증기관 무료, 개인회원 유료
        The temperature distribution of a generic battery module was analyzed for different flow rates of cooling fluid. For the given battery module design, the temperature of battery cell near the inlet is higher than that of battery cell near the outlet. Because the inlet is located at the higher elevation than the top of battery electrodes, most of the incoming cooling fluid flows directly towards the battery housing wall above the outlet. For the inlet velocities of 1, 3, 5 m/s, the maximum temperature differences are 28, 19, 15 degrees Celcius respectively.
        4,000원
        118.
        2013.02 KCI 등재 구독 인증기관 무료, 개인회원 유료
        본 연구에서는 초임계 CO2 추출법을 이용하여 공정변수가 대두유의 수율에 미치는 영향과 초고압 처리가 초임계 추출에 미치는 영향에 대하여 분석하였다. RSM 실험법을 통한 최적화 실험에서 468.18 bar, 80.23oC, 46.82 g/min의 조건에서 최대값 25.88%를 나타내었다. 초임계 추출법의 최적추출조건에서 초고압 전처리 후 추출 수율은 17.15-23.66%로 전처리 전보다 감소하는 경향을 나타내었다. 462.13MPa, 1분의 추출조건에서 정상점은 최대값으로 24.91%가 예측되었다. 초고압 전처리 후 초임계 추출에서 수율이 증가하지 않은 이유는 초고압 전처리시 입자의 뭉침현상이 일어나 평균입자크기가 증가하여 나타난 현상으로 추론하였다. 결과적으로 초고압 전처리는 초임계 추출 수율 증가에 영향을 미치지 못하는 것을 알 수 있었다. 초임계 CO2 추출법을 이용하여 대두유를 추출할 경우 추출 압력, 유량이 높을수록 추출온도가 낮을수록 더 많은 양의 대두유를 추출할 수 있다.
        4,000원
        119.
        2012.12 구독 인증기관 무료, 개인회원 유료
        This study aimed at investigating whether a porcine follicular fluid (pFF) supplementation positively affects the characteristics of donor cells and the developmental competence of porcine cloned embryos. Ear fibroblast cells (donor cell) from an Massachusetts General Hospital miniature pig were cultured in different culture methods: (1) Dulbecco's modified Eagle's medium (DMEM)+10% FBS (Control); (2) DMEM+0.5% FBS (SS); and (3) DMEM+10% FBS+10% pFF (pFF) for 72 h. In each conditioned medium, the concentrations of 4 amino acids (Thr, Glu, Pro, and Val) in the pFF group were significantly different from those in the control group (p<0.05 or p<0.01). The proliferation of the cells cultured in the SS group was significantly lower than that of the other treatment groups (p<0.01). The population of apoptotic and necrotic cells in the SS group was significantly higher than that of either the control or the pFF group (p<0.01). The number of embryos that cleaved (p<0.05) and developed into blastocysts (p<0.01) in the SS group was significantly lower than that of either the control or the pFF group. Compared to other groups, the blastocysts produced from the donor cells in the pFF group had higher total cells and lower apoptotic cells (p<0.05). It can be concluded that pFF supplementation in the donor cell culture medium positively affects cell death, cell cycle and quality of the cloned blastocyst.
        4,000원
        120.
        2012.12 KCI 등재 구독 인증기관 무료, 개인회원 유료
        Fluid frictional hot-water system consisted of power supply equipment, a motor, fluid heater, fluid tank, circulating pump, fan, flow meter and a heat exchanger. The system had a motor of power capacity 15.2kw/h, light-oil hot air heater in control plot had the heating capacity 20,000kcal/h, by the performance test result, it could supply heat from 24.6 to 28.1 kw depending on the motor, respectively. Thermal efficiency of fluid frictional heater were 88.1% to 91.0% in the same conditions. As the result, a deviation of indoor air temperature between the treatment plot and the control plot was about 2℃. It was heating cost of the each system heater and light-oil hot air heater heating cost were 742,200won, 2,266,000won. therefore heating cost saving was 67%. Yield of tomato cultured in greenhouse with fluid frictional hot-water system was high as 4%. As a result, the fluid frictional hot-water system was 48% higher in economics than the hot air heater.
        4,000원