검색결과

검색조건
좁혀보기
검색필터
결과 내 재검색

간행물

    분야

      발행연도

      -

        검색결과 173

        101.
        2012.10 KCI 등재 SCOPUS 구독 인증기관 무료, 개인회원 유료
        Diamond-like carbon (DLC) films have been widely used in many industrial applications because of their outstanding mechanical and chemical properties like hardness, wear resistance, lubricous property, chemical stability, and uniformity of deposition. Also, DLC films coated on paper, polymer, and metal substrates have been extensively used. In this work, in order to improve the printing quality and plate wear of polymer printing plates, different deposition conditions were used for depositing DLC on the polymer printing plates using the Pulsed DC PECVD method. The deposition temperature of the DLC films was under 100˚C, in order to prevent the deformation of the polymer plates. The properties of each DLC coating on the polymer concave printing plate were analyzed by measuring properties such as the roughness, surface morphology, chemical bonding, hardness, plate wear resistance, contact angle, and printing quality of DLC films. From the results of the analysis of the properties of each of the different DLC deposition conditions, the deposition conditions of DLC + F and DLC + Si + F were found to have been successful at improving the printing quality and plate wear of polymer printing plates because the properties were improved compared to those of polymer concave printing plates.
        4,000원
        102.
        2012.09 KCI 등재 SCOPUS 구독 인증기관 무료, 개인회원 유료
        Among the various roll-to-roll printing technologies such as gravure, gravure-offset, and reverse offset printing,reverse offset printing has the advantage of fine patterning, with less than 5µm line width. However, it involves complexprocesses, consisting of 1) the coating process, 2) the off process, 3) the patterning process, and 4) the set process of the ink.Each process demands various ink properties, including viscosity, surface tension, stickiness, and adhesion with substrate orcliché; these properties are critical factors for the printing quality of fine patterning. In this study, Ag nano ink was developedfor reverse offset printing and the effect of polyvinylpyrrolidone(PVP), used as a capping agent of Ag nano particles, on theprinting quality was investigated. Ag nano particles with a diameter of ~60nm were synthesized using the conventional polyolsynthesis process. Ethanol and ethylene glycol monopropyl ether(EGPE) were used together as the main solvent in order tocontrol the drying and absorption of the solvents during the printing process. The rheological behavior, especially ink adhesionand stickiness, was controlled with washing processes that have an effect on the offset process and that played a critical rolein the fine patterning. The electrical and thermal behaviors were analyzed according to the content of PVP in the Ag ink. Finally,an Ag mesh pattern with a line width of 10µm was printed using reverse offset printing; this printing showed an electricalresistivity of 36µΩ·cm after sintering at 200oC.
        4,000원
        103.
        2011.12 구독 인증기관 무료, 개인회원 유료
        그라비어 오프셋 인쇄 공법을 이용하여 미세 패턴 전극을 형성하였고, 패턴 형성에 대한 블랭킷의 영향을 알아보기 위해 블랭킷의 용제 흡수량과 경도의 차등을 주어 실험을 하였다. 그라비어 오프셋은 블랭킷이 얼마나 용제의 흡수와 배출을 적절한게 하느냐에 따라서 연속 인쇄성과 여러 가지 인쇄적성에 큰 영향을 끼치게 된다. 총 4가지의 종류별 블랭킷의 테스트 결과 흡수량이 가장 높고 경도가 가장 낮은 블랭킷이 4가지 블랭킷 중 가장 인쇄적성과 전도성이 우수함을 알 수 있었다.
        4,000원
        104.
        2011.10 KCI 등재 구독 인증기관 무료, 개인회원 유료
        Thermoelectric-thick films were fabricated by using a screen printing process of n and p-type bismuth-telluride-based pastes. The screen-printed thick films have approximately 30 in thickness and show rough surfaces yielding an empty gap between an electrode and the thick film. The gap might result in an increase of an electrical resistivity of the fabricated thick-film-type thermoelectric module. In this study, we suggest a conductive metal coating onto the surfaces of the screen-printed paste in order to reduce the contact resistance in the module. As a result, the electrical resistivity of the thermoelectric module having a gold coating layer was significantly reduced up to 30% compared to that of a module without any metal coating. This result indicates that an introduction of conductive metal layers is effective to decrease the contact resistivity of a thick-film-typed thermoelectric module processed by screen printing.
        4,000원
        105.
        2011.08 KCI 등재 구독 인증기관 무료, 개인회원 유료
        Inkjet printing was successfully done using Cu nano powder ink after these Cu nano powders were dry-coated with 1-octanethiol for oxidation prevention. 1-octanethiol, which is Self-Assembled Multi-layers (SAMs), was coated approximately 10-nm thick on the surface of Cu nano powders. 1-Octanol, which has the same chain length as that for 1-octanethiol, was used as a solvent to make the ink for inkjet printing. As a result, the fabricated ink was dispersed for about 4 weeks, and after printing and heat treatment at for 4 hours, the resistivity for the printed pattern was measured to be .
        4,000원
        106.
        2010.10 KCI 등재 구독 인증기관 무료, 개인회원 유료
        The purpose of this study is to reorganize any rusty image including natural modeling characteristic presented from the natural phenomenon to certain patterns in order to create the fashion design that are valued in the expansion of independently expressional area and modeling art. As a method for research, the author analyzed the concept and characteristic for rust with a base of theoretical background by the documental research and realistic consideration, analyzed its modeling characteristic through domestic and overseas pictures, and e-documents as data, inspected the modeling activities of various categories that various images were adapted related to rust, looked into the concept of Digital Textile Printing and its producing procedure as an expressional method, and analyzed the examples of modern dress and its ornament making use of Digital Textile Printing. The conclusions of this study are as below. First, the rust occurred due to the natural phenomenon is the bond with different material like metal, each unique modeling characteristic occurs and harmony of various patterns has abundant aesthetic value. Second, the author could endowed sensible characteristic and speciality with works and could produce creative fashion design that painting, abstractive pattern and harmony of unique sense of colors are significant by using the image of rust, Third, to emphasize natural feeling of rust, the author could develop creative design that simple silhouette and impressive pattern look significant by reorganizing and applying rust according to repetition, increment, rhythm, contract, emphasis and harmony. Fourth, Digital Textile Printing method is used to induce visual effect by the expression of feels of rust, and the author could express the natural patterns, delicate expression for the feels of a material and unique design of emotion.
        4,600원
        107.
        2009.08 KCI 등재 SCOPUS 구독 인증기관 무료, 개인회원 유료
        This paper describes an improved strategy for controlling the adhesion force using both the antiadhesion and adhesion layers for a successful large-area transfer process. An MPTMS (3-mercaptopropyltrimethoxysilane) monolayer as an adhesion layer for Au/Pd thin films was deposited on Si substrates by vapor self assembly monolayer (VSAM) method. Contact angle, surface energy, film thickness, friction force, and roughness were considered for finding the optimized conditions. The sputtered Au/Pd (~17 nm) layer on the PDMS stamp without the anti-adhesion layer showed poor transfer results due to the high adhesion between sputtered Au/Pd and PDMS. In order to reduce the adhesion between Au/Pd and PDMS, an anti-adhesion monolayer was coated on the PDMS stamp using FOTS (perfluorooctyltrichlorosilane) after O2 plasma treatment. The transfer process with the anti-adhesion layer gave good transfer results over a large area (20 mm × 20 mm) without pattern loss or distortion. To investigate the applied pressure effect, the PDMS stamp was sandwiched after 90˚ rotation on the MPTMS-coated patterned Si substrate with 1-μm depth. The sputtered Au/Pd was transferred onto the contact area, making square metal patterns on the top of the patterned Si structures. Applying low pressure helped to remove voids and to make conformal contact; however, high pressure yielded irregular transfer results due to PDMS stamp deformation. One of key parameters to success of this transfer process is the controllability of the adhesion force between the stamp and the target substrate. This technique offers high reliability during the transfer process, which suggests a potential building method for future functional structures.
        4,000원
        108.
        2009.04 KCI 등재 SCOPUS 구독 인증기관 무료, 개인회원 유료
        Nanofabrication is an essential process throughout industry. Technologies that produce general nanofabrication, such as e-beam lithography, dip-pen lithography, DUV lithography, immersion lithography, and laser interference lithography, have drawbacks including complicated processes, low throughput, and high costs, whereas nano-transfer printing (nTP) is inexpensive, simple, and can produce patterns on non-plane substrates and multilayer structures. In general nTP, the coherency of gold-deposited stamps is strengthened by using SAM treatment on substrates, so the gold patterns are transferred from stamps to substrates. However, it is hard to apply to transfer other metallic materials, and the existing nTP process requires a complicated surface treatment. Therefore, it is necessary to simplify the nTP technology to obtain an easy and simple method for fabricating metal patterns. In this paper, asnTP process with poly vinyl alcohol (PVA) mold was proposed without any chemical treatment. At first, a PVA mold was duplicated from the master mold. Then, a Mo layer, with a thickness of 20 nm, was deposited on the PVA mold. The Mo deposited PVA mold was put on the Si wafer substrate, and nTP process progressed. After the nTP process, the PVA mold was removed using DI water, and transferred Mo nano patterns were characterized by a Scanning electron micrograph (SEM) and Energy Dispersive spectroscopy (EDS).
        3,000원
        111.
        2007.06 구독 인증기관 무료, 개인회원 유료
        본 실험에서는 스크린 인쇄 및 그라비어 인쇄 등 direct printing에 사용가능한 UV 경화형 Ag paste를 제조하였다. Ag 분말은 표면이 극성이므로 분말끼리의 응집력이 강하고, 비극성인 UV경화형 수지와의 친화성이 좋지 못해, 분산성이 좋지 못한 paste를 얻을 수 있다. 따라서 본 실험에서는 Ag 분말 표면을 올레인산 또는 도데칸 티올로 코팅함으로써, Ag 분말 표면을 비극성화하여 UV 경화형 수지와의 친화성을 높이는 것으로 Ag 분말 일차 입경 수준의 paste 분산특성을 얻었다. 제조된 Ag paste의 레올로지 특성을 검토한 결과, 표면 처리된 Ag paste의 경우, 낮은 전단 영역에서 형성된 Ag 분말과 바인더 수지와의 응집구조에 의해 shear thinning 거동을 나타내며, 높은 저장 탄성율을 갖게 되었다. UV 경화한 Ag 도막의 전기적 특성을 측정한 결과, UV 경화가 진행될수록 Ag 분말사이의 접촉이 증가하여 비저항이 감소하였고, 1500mJ/㎠에서는 10-3Ω․㎝의 비저항을 갖는 Ag 도막을 얻을 수 있었다.
        4,000원
        114.
        2006.04 구독 인증기관·개인회원 무료
        3D printing of NiTi alloys has been successfully achieved. A novel printing process has been developed and used, which consists in selective deposition of a solvent on a granule bed. The granules are composed of metal powders and thermoplastic binder, which are mixed and sieved by conventional methods. A sound green strength is obtained after solvent evaporation. Sintered parts exhibit good density, proper phase composition and shape memory behaviour.
        115.
        2006.04 구독 인증기관·개인회원 무료
        The fabrication of complex-shaped parts out of Co-Cr-Mo alloy and 316L stainless steel by three-dimensional printing (3DP) was studied using two grades of each alloy with average particle size of 20 and , respectively. To produce sound specimens, the proper 3DP processing parameters were determined. The sintering behavior of the powders was characterized by dilatometric analysis and by batch sintering in argon atmosphere at for 2h. The 3DP process has successfully produced complex-shaped biomedical parts with total porosity of 12-25% and homogenous pore structure, which could be suitable for tissue growth into the pores.
        118.
        2005.09 KCI 등재 구독 인증기관·개인회원 무료
        이 실험은 random amplified polymorphic DNA(RAPD) 분석을 이용하여 71개 느타리 품종에 대한 DNA finger printing을 만들고 유연 관계를 해석하기 위해서 수행되었다. RAPD 분석은 12개의 Universal rice primers(URP)와 1개 의 operon primer, FGL17 primer를 사용하여 수행되었다. 유연 관계 분석은 NTsyspc program(ver. 2.02)의 data matrix를 작성하기 위해서 DNA 밴드의 유무에 따라 1과 0의 값을 주었으며 유사도는 default값인 sm(simple matching coefficient)으로 계산하였다. 유연관계 분석에 의하면 공시된 느타리 품종은 6개 그룹으로 구분되었는데 느타리종(ASI 2180 등 62품종), 사철느타리종(ASI 2016 등 2품종), 여름느타리종(ASI 2070 등 3품종), 큰느타리종(ASI 2302 등 2품 종), 전복느타리종(ASI 2079), 백령느타리종(ASI 2720)이었다. 느타리종은 62품종인데 8개 그룹으로 구분할 수 있었다. 그룹1은 원형느타리외 6품종, 그룹2는 춘추 2호외 9품종, 그룹3은 장안 PK외 7품종, 그룹4는 김제 9호외 5품종, 그룹5는 치악 4호외 12품종, 그룹6은 청도 22호 1품종, 그룹7은 소담외 14품종, 그룹8은 부평복회외 1품종으로 구분되었다. 14개의 프라이머 중에서 FGL17 primer는 600bp의 느타리종 Pluerotus ostreatus 특이 밴드를 가졌다. 이 프라이머는 느타리종의 동정에 있어서 아주 유용한 프라이머로 이용될 수 있을 것이다. DNA 다형성 분석 결과 거의 100%의 유사도 를 가지는 네쌍의 버섯들이 확인되었다.
        120.
        2005.08 KCI 등재 구독 인증기관 무료, 개인회원 유료
        The purpose of this study is to examine the prevalence of musculoskeletal disorders and ergonomic risk factors for workers of printing business. A self-reporting survey and task analysis using video camera were performed to identify ergonomic risk factors associated with musculoskeletal disorders. We used the OWAS, RULA, and REBA methods to quantify the risk factors, and the results show that the printing business have high risk of work-related musculoskeletal disorders.
        4,000원
        6 7 8 9