Existing studies of Japanese consumers have emphasized the importance of collectivism and risk aversion in Japanese culture. In this paper we examine the relationship between these constructs in new product adoption decisions that involve brand switching. We argue that, for Japanese consumers, the perceived emotional risk of adoption is related to (1) the degree to which a consumer identifies with the brand of his or her current product and (2) the perceived performance, financial, and social risks of switching to an alternative product. We further hypothesize that perceived social risk is positively related to brand identification, perceived performance risk, and perceived financial risk. Finally, we hypothesize that financial risk is positively related to performance risk. We test our hypotheses using data collected in Japan in June 2015. Questionnaire items were adapted from existing, well-validated scales. The Japanese version of the questionnaire was developed by using the standard double translation procedure. The Japanese version of the questionnaire was administered by a marketing research firm to a national panel of respondents stratified by age and gender. The resulting sample consisted of 518 iPad owners from across Japan, of whom approximately half were men. Within each gender category, approximately half of the respondents intended to purchase a new tablet within the next 12 months. Following established SEM procedures, we began by estimating a confirmatory factory analysis model, after which we estimated a structural equation model. In each case, the estimated model satisfied standard evaluation criteria. In general, our findings provide support for the hypothesized model. First, Perceived Performance Risk was positively related with Financial Risk, Social Risk, and Emotional Risk. Second, Financial Risk was positively related with Social Risk. Third, Social Risk was positively related with Emotional Risk. Fourth, Brand Identification was positively related with Social Risk and Emotional Risk. The one hypothesized linkage that was not supported was the relationship between Financial Risk and Emotional Risk. A comparison of coefficient magnitudes reveals several important findings. First, in the Social Risk equation, the coefficient of Performance Risk is significantly larger than the Brand Identification coefficient. Second, within the Emotional Risk equation, the coefficient of Performance Risk is significantly larger than the coefficients of Brand Identification and Financial Risk. Similarly, the coefficient of Social Risk is also significantly larger than the coefficients of Financial Risk and Social Risk.

The main objective of this paper is to develop computer simulation program for performance evaluation and cost estimation of a reverse osmosis (RO) and pressure-retarded osmosis (PRO) hybrid process to propose guidelines for its economic competitiveness use in the field. A solution-diffusion model modified with film theory and a simple cost model was applied to the simulation program. Using the simulation program, the effects of various factors, including the Operating conditions, membrane properties, and cost parameters on the RO and RO-PRO hybrid process performance and cost were examined. The simulation results showed that the RO-PRO hybrid process can be economically competitive with the RO process when electricity cost is more than 0.2 $/kWh, the PRO membrane cost is same as RO membrane cost, the power density is more than 8 W/m2 and PRO recovery is same as 1/(1-RO recovery).

IPS(Ideal Production System) is a strategic cost management establishing ideal target cost, innovating cost structure and reduction. However, IPS was commonly used in assembly industry acquiring components and using them to assemble vehicles etc. Applying IPS to steel industry is a new try and not easy because cost elements in flow manufacturing are clustered and obfuscated in a complicated way. This paper proposes ICM (Ideal Cost Management) method adaptive to steel industry. One of the biggest advantages is that ICM could classify and categorize costs in detail according to accounts and manufacturing machines. Based on ICM information, steps of extracting and maximizing ideas are followed effectively. From 2013, ICM was applied successfully to POSCO Pohang Steel Works 38 factories.

The purpose of this study is to estimate the economic value of boat fishing experience marine tourism activity in Jeju Island’s Chagwido. The economic value is estimated as consumer surplus using count data models including the truncated Poisson model and the truncated negative binominal distribution model. This study collects the effective 504 questionnaires from boat fishing experience tourists in Jeju Island’s Chagwido. The truncated negative binominal distribution model was statistically more suitable and valid than other models. The truncated negative binominal distribution model was applied to estimate consumer surplus as economic value from boat fishing experience tourism activity in Jeju Island’s Chagwido. A consumer surplus value per trip was estimated as about 209,900 won. The annual economic value from boat fishing experience tourism activity was estimated as 273,700 won in Jeju Island’s Chagwido. Consequently, boat fishing experience marine tourism activity has a very large economic value in Jeju Island.

PURPOSES: Concrete pavement has been used in the construction of the Jungbu expressway in 1987. More than 60% of the pavement on the expressway is currently made of concrete, but most has been used far beyond their design life. Pavement life has been extended through routine maintenance or overlay. However, the structural capacity of the pavement has reached its limit, and extensive rehabilitation/reconstruction with long time traffic blocking should be considered. The three following issues on concrete rehabilitation/reconstruction will be discussed: (1) economic comparison of asphalt inlay and asphalt overlay, (2) economic comparison preventive overlay on a section which is currently good and routine overlay on the section which will be poor, and (3) economic analysis of early-strength concrete when it is used in concrete reconstruction. METHODS: First, various life cycle cost analysis tools were compared, and the proper tool for the extensive rehabilitation/reconstruction was selected. Second, a sensitivity analysis of the selected tool was performed to find the influential input variables, which should be carefully selected in the analysis. Third, three case studies, which can be issues in the rehabilitation/reconstruction of the expressway concrete pavement in Korea, were performed. RESULTS: Asphalt overlay without milling the deteriorated concrete showed 18~25% lower life cycle cost than the current asphalt inlay with milling. The good current preventive overlay on the section was economically justified within the scope of this study. The construction cost limit of the early strength concrete was suggested to be economical for 1, 3, and 7 days of construction alternative opening. CONCLUSIONS: CA4PRS was a viable tool for comparing various rehabilitation/reconstruction issue alternatives. Several concrete issues associated with the rehabilitation/reconstruction of the deteriorated concrete pavement were discussed as mentioned above.

Carbon nanofiber (CNF) composites coated with spindle-shaped Fe2O3 nanoparticles (NPs) are fabricated by a combination of an electrospinning method and a hydrothermal method, and their morphological, structural, and chemical properties are measured by field-emission scanning electron microscopy, transmission electron microscopy, Xray diffraction, and X-ray photoelectron spectroscopy. For comparison, CNFs and spindle-shaped Fe2O3 NPs are prepared by either an electrospinning method or a hydrothermal method, respectively. Dye-sensitized solar cells (DSSCs) fabricated with the composites exhibit enhanced open circuit voltage (0.70 V), short-circuit current density (12.82 mA/cm2), fill factor (61.30%), and power conversion efficiency (5.52%) compared to those of the CNFs (0.66 V, 11.61 mA/cm2, 51.96%, and 3.97%) and spindle-shaped Fe2O3 NPs (0.67 V, 11.45 mA/cm2, 50.17%, and 3.86%). This performance improvement can be attributed to a synergistic effect of a superb catalytic reaction of spindle-shaped Fe2O3 NPs and efficient charge transfer relative to the one-dimensional nanostructure of the CNFs. Therefore, spindle-shaped Fe2O3-NPcoated CNF composites may be proposed as a potential alternative material for low-cost counter electrodes in DSSCs.

PURPOSES: This study was initiated to estimate expressway traffic congestion costs by using Vehicle Detection System (VDS) data. METHODS : The overall methodology for estimating expressway traffic congestion costs is based on the methodology used in a study conducted by a study team from the Korea Transport Institute (KOTI). However, this study uses VDS data, including conzone speeds and volumes, instead of the volume delay function for estimating travel times. RESULTS : The expressway traffic congestion costs estimated in this study are generally lower than those observed in KOTI's method. The expressway lines that ranked highest for traffic congestion costs are the Seoul Ring Expressway, Gyeongbu Expressway, and the Youngdong Expressway. Those lines account for 64.54% of the entire expressway traffic congestion costs. In addition, this study estimates the daily traffic congestion costs. The traffic congestion cost on Saturdays is the highest. CONCLUSIONS : This study can be thought of as a new trial to estimate expressway traffic congestion costs by using actual traffic data collected from an entire expressway system in order to overcome the limitations of associated studies. In the future, the methodology for estimating traffic congestion cost is expected to be improved by utilizing associated big-data gathered from other ITS facilities and car navigation systems.

감정평가 방식은 크게 3가지로 구분된다. 원가법 및 적산법 등 비용성의 원리에 기초한 감 정평가 방식인 원가방식, 거래사례비교법, 임대사례비교법 등 시장성의 원리에 기초한 감 정평가방식인 비교방식과 수익환원법 및 수익분석법 등 수익성의 원리에 기초한 감정평가 방식인 수익방식이다 이러한 건물의 현존가치 평가는 소송에 의한 경우 법원으로부터 감정인으로 지정된 법원감 정인들에 의해서 수행되고 있다. 감정평가사들에 의해 행해지는 대출 등의 소송 외적인 목 적으로 건물의 현존가치를 평가(이하 ‘사감정’이라 한다) 하는 경우에는 많은 연구와 세부적 인 평가기준이 있다. 그러나 법원감정에서는(유익비 등을 산정하기 위한 건물의 현존가치를 평가하는 경우 등) 평가 대상과 목적에 맞는 합리적인 방법이나 기준이 없어서 사감정의 관 련규정을 준용하거나, 감정인의 주관적인 판단에 의해서 감정평가가 진행되고 있다. 그로 인하여 건물의 현존가치 평가 결과는 평가하는 감정인에 따라서 많은 차이가 나고 있다. 이 와 같이 감정에 대한 객관적인 기준이 없이 감정인 마다 각자의 기준으로 현존가치를 산정 함으로써 감정의 신뢰성 및 효율성이 떨어지게 되고 이를 증거로 채택하게 되는 재판의 결 과에 대하여 당사자의 입장에 따라서는 감정의 결과를 불신하게 되어 재 감정을 요구하거나 감정평가자를 상대로 손해배상을 청구하는 등 강한 불만을 갖는 경우가 많다. 건물의 가치평가 중에서도 소송에 관련된 특수성이 있는 유익비 등을 산정하기 위한 평가 에서도 감정기준이나 방법에 대한 연구가 부족하여 감정인에 따라서 다양한 평가방법으로 건물의 현존가치를 평가하고 있다. 건물의 가치를 평가하는 방법 중에서 복성식평가법을 적용하는 경우에는 건물의 내용연수에 따른 감가수정을 통하여 건물의 가치를 평가하게 된 다. 이러한 경우에 합리적인 건물의 내용연수의 산정이 가치평가에 중요한 요소가 된다. 특 히 법원 감정의 경우에는 건물 전체의 내용연수도 중요하지만, 각 공종별 내용연수 및 잔 존내용연수를 산정하는 방법 및 기준이 필요하다. 이러한 법원감정의 현실을 반영한 각 공종별 내용연수 및 실용내용연수 산정 방법에 대한 기준 등에 많은 문제점을 파악하고, 실무에 활용할 수 있는 각 공종별 내용연수 및 실용내 용연수 산정 방법에 대한 기준을 제시하였다

외부비용은 재화나 서비스가 생산 또는 소비되는 과정에서 제3자에게 부과되는 비용이다. 원자력 발전을 통한 전력생산에 도 외부비용이 발생하며 이들에 대한 연구가 1990년대부터 진행되어 왔다. 비용은 정책결정에 중요한 요소로 전력 생산에 대한 비용 비교를 위해 외부비용이 고려되고 있다. 핵연료주기에서도 선택에 따라 다른 외부비용이 발생되지만 이에 대한 연구는 진행되고 있지 않다. 본 연구에서는 핵연료주기 외부비용 평가 방법 개발을 위해 원자력 발전에 대한 외부비용 평가 방법을 조사하고 분석하였다. 후쿠시마 사고 이전에는 외부비용 연구들은 정상 운전 상태에서의 손상 비용에 초점을 두었 다. 그러나 사고 이후 사고비용이 주요 주제가 되었다. 사고비용을 포함한 외부비용 범위는 여러 연구들에서 다양하게 사용 되었으며 범위에 맞춰 다른 방법들이 적용되었다. 본 연구에서는 이러한 결과들이 비교되었으며 핵연료주기에 따른 외부비 용 추산에 방법적 적용성 판단을 위해 분석되었다.

국내 원자력발전은 현재 두 번째로 큰 전력 공급 방법이며 원전의 수 역시 증가되는 것으로 계획되어 있다. 그러나, 원자력발 전에 의해 발생되는 사용후핵연료에 대해서는 아직 명확한 관리 정책이 확립되어 있지 않다. 원자로 이 후 핵물질 흐름과 관 련된 후행 핵연료주기는 사용후핵연료 관리를 위한 기술들의 집합이다. 따라서, 사용후핵연료 관리 정책은 핵연료주기 선택 과 함께한다. 핵연료주기 선택의 중요 항목은 경제성으로 이는 사적비용과 함께 외부비용을 더해 결정되어야 한다. 직접비용 인 사적비용과 달리 간접비용인 외부비용에 대한 연구는 원전에 집중되어 있으며 핵연료주기에 대한 연구는 없는 상황이다. 본 연구에서는 핵연료주기에 적용할 수 있는 외부비용 항목들을 도출하고 정량화를 시도하였다. 핵연료주기 외부비용 평가 를 위해 고려될 수 있는 핵연료주기로 OT(직접처분), DUPIC(PWR-CANDU 연결), PWR-MOX(PWR 습식재처리), Pyro-SFR (파이로 처리와 고속로 연계)의 네 가지를 선정하였다. 원자력발전의 외부비용 평가에 고려되었던 항목들을 분석하여 핵연 료주기에서 에너지 공급 안보비용, 사고위험비용과 수용성 비용을 외부비용 항목으로 도출하고 추산하였다.

Polymer electrolyte membranes consisting of a PVP/AgCF3SO3/Al(NO3)3 complex were prepared for the separation of a propylene/propane mixture. In this study, the effect of Al(NO3)3 on inhibiting the reduction of silver ions generated from AgCF3SO3 was investigated, where AgCF3SO3 was used as a cost-effective alternative to AgBF4 in the facilitated olefin transport membranes. When Al(NO3)3 was incorporated into a PVP/AgCF3SO3 complex membrane, the selectivity of propylene/propane and mixed gas permeance showed 5 and 0.5GPU, respectively. Moreover, the PVP/AgCF3SO3/Al(NO3)3 complex membranes showed long-term stability although AgCF3SO3 is easily reduced to silver nanoparticles. It was thus proved that Al(NO3)3 played the role of a retardant for the reduction of silver ions generated from AgCF3SO3 as well as from AgBF4.

This paper develops a two-echelon supply chain model with variable setup cost and environmental impact. A single-setup-multi-delivery (SSMD) policy is adopted to increase the efficiency of transportation in the supply chain in which it is assumed that the shipment lot size of each delivery is unequal and variable. Each delivered item goes through inspection process at the buyer’s end. After inspection, defective products are returned to the vendor for reworking process. Due to inspection process, end customers receives perfect quality items. Due to more transportations by SSMD policy, this model assumes carbon emission cost to help the world environment. An investment function is used to reduce total setup cost for the whole supply chain. Stackelberg leadership approach is utilized in this model to optimize the joint total cost of vendor and buyer. Finally, some numerical examples, sensitivity analysis, and graphical representations are given to illustrate more savings from existing literature.

The objective of this study is to examine the potential of cost reduction and factors affecting production cost of Korean farmers. First, the study estimates technical efficiency, allocation efficiency, and cost efficiency of Korean farmers using DEA. Then, Tobit regressions are conducted to identify factors affecting each of the three efficiency scores. The study uses the Farm Household Economy Survey data from the Korean National Bureau of Statistics for the period from 2008 to 2012. Results from DEA show that overall, technical and cost efficiency scores are low, which suggests a great potential of cost reduction for Korean farmers. The results also show relatively large differences in efficiency scores across provinces. Tobit results suggest that farm size, number of family members, operation costs, and invested capital amount are major factors affecting farm efficiencies.

The abalone aquaculture has been very rapidly developed in Korea. Annual production quantity was less 200 tons before 2000th, it have been increased to over 9,000 tons in 2014. Also Abalone export amounts have been over 20 million dollars. The reason of rapid growth of Abalone aquaculture in Korea is due to high level profit ratio. Then now many fishing officers and other aquaculture fishers want to participate with abalone aquaculture newly. However Recent Abalone aquaculture in Korea is faced some problems. Aspects of production environmental status of fishing grounds are more aggravate, and then abalone aquaculture is exposed to various disease, and death rate of young abalone is higher. And aspect of management, the aquaculture cost is more increase. The demand of abalone also is depressing recently, this cause to come down the production price. In this viewpoint, Management analysis of abalone aquaculture in Korea is helpful for decision making of general aquaculture fisher want to participate newly. The analysis is practiced two aspects. One is index analysis, and the other is Break-even-point(BEP) analysis. The result of index analysis, average net profit rate has shown 28.0%, however the Regional difference has excessive. That is, Wando(major) has shown 39.4%, and Haenam province has shown 14.2%. On the other hand, the more scale has shown higher profit rate by aquaculture scale. And the result of BEP analysis, average has shown 93 cage number per abalone aquaculture household, and Wando(major) has shown 56 cage number, Haenam province has shown 131 cage number. The lower production abalone price of recent means higher BEP level.

Although the NutriPlus program has shown considerable evidence of enhancing users’ nutritional status, the budget does not cover all eligible mothers and children. This study aimed to conduct a cost-benefit analysis of the NutriPlus program to assess its economic efficiency. 53 families with 79 users in the NutriPlus program at Daejeon Dong-gu Health Center participated in this study with informed consent. The costs and benefits were estimated from both the administrator’s and users’ perspectives. We converted the time cost into Korean currency based on the minimum wage in 2014. The value of nutrition education and service (B2), estimated by contingency valuation method (CVM), was counted as an economic benefit. 6 families (11.3%) were recipients of national medical care and 22 families (41.5%) paid 10% of the food package cost by themselves. The total cost was 7,450,167 and the total benefit was 12,402,239. The budget for the health center (C1+C2+C3+C4) was 5,984,381 a month. Time and transportation cost for receiving nutrition education (C6) differed significantly according to the economic status of families. Household food consumption increase (C4-B4) was 40,379 in the poverty group, which was four times more than in the other groups. The net benefit (B-C) was 4,852,172 and the B/C ratio was 1.66. Therefore, the NutriPlus program is beneficial in the economic aspect as well as in the nutritional aspect. If the enhancement of nutritional status was also considered, the total benefit would be even higher. These results confirm the legitimacy of a secure budget for the NutriPlus program. And we suggest expanding its budget to cover more eligible individuals to improve people’s health and welfare.

This research carried out an analysis on input cost and leakage reduction effect by leakage reduction method, focusing on the project for establishing an optimal water pipe network management system in the Taebaek region, which has been executed annually since 2009. Based on the result, optimal cost-benefit analysis models for water distribution network rehabilitation project were developed using DEA(data envelopment analysis) and multiple regression analysis, which have been widely utilized for efficiency analysis in public and other projects. DEA and multiple regression analysis were carried out by applying 4 analytical methods involving different ratios and costs. The result showed that the models involving the analytical methods 2 and 4 were of low significance (which therefore were excluded), and only the models involving the analytical methods 1 and 3 were suitable. From the result it was judged that the leakage management method to be executed with the highest priority for the improvement of revenue water ratio was installation of pressure reduction valve, followed by replacement of water distribution pipe, replacement of water supply pipe, and then leakage detection and repair; and that the execution of leakage management methods in this order would be most economical. In addition, replacement of water meter was also shown to be necessary in case there were a large number of defective water meters.

태양전지는 태양복사에너지를 반도체의 광전효과를 통해 전기에너지로 변환시키는 친환경 에너지변환장치를 의미한다. 수분을 포함하는 다양한 화학물질들에 대한 높은 차단성을 갖는 다층형 필름인 백시트는 태양전지의 중요한 요소이다. 대표적인 백시트는 polyvinyl fluoride (PVF)와 poly(ethylene terephthalate) (PET)의 다층필름으로 구성된다. PVF는 높은 내후성을 가지는 반면, 가격이 상대적으로 비싼 단점을 보인다. 따라서, 백시트의 제조가격을 낮출 수 있으면서, 동시에 실제 태양전지모듈에 적용할만한 수명특성을 만족시킬 수 있는 대체소재의 개발이 필수적이다. 본 연구에서는 일정수준의 결정성을 갖는 PET 필름을 PVF 필름 대신 사용하였다. 그러나, PET 소재는 다양한 pH 조건에서 trans-esterification 및 가수분해에 의해 분해될 수 있기 때문에, 태양전지의 구동조건에서 PET의 분해거동을 이해할 필요가 있다. 단시간 내 화학적 분해거동을 평가하기 위해서, 가속화된 PET 분해실험 프로토콜이 개발되었다. 마지막으로, 제안 개념의 효용성은 태양전지모듈의 장기운전성능 평가를 통해 확인하였다.