The paper presents a new approach for analyzing mold growth risk in buildings, based on a mixed simulation approach with consideration of uncertainties in relevant building parameters. The approach is capable to predict and explain unexpected mold growth occurrences that would typically not show up in standard deterministic simulation. This study simulates the local environmental conditions at material surfaces in buildings by using a mix of standard simulation tools. By introducing uncertainties in relevant input parameters, this approach generates a statistical distribution of time aggregated mold growth conditions at a number of "trouble spots"in a specific building case. This distribution is then translated into an overall mold risk indicator. In addition, our method identifies those parameters whose uncertainty range has a dominant effect on an increase in mold risk. By thus identifying the critical influence of building components, building operation and maintenance factors on the increase in risk, appropriate actions during the building design and procurement process can be set up to address these risks.

The likelihood of failure for the stress corrosion cracking (SCC) of caustic cracking, which affect to a risk of facilities, was analyzed through the risk based-inspection using API-581 BRD. We found that SCC of the caustic cracking was occurred above 5 % NaOH concentration, and the technical module subfactor (TMSF) was maximized for above 50 % concentration. The heat traced and monitoring were not sensitive to the TMSF with NaOH concentration and temperature. But the steam out was more of less affect minimum value of the TMSF. Also, the inspection number, the inspection effectiveness, and the year since inspection were very sensitive to the TMSF with NaOH concentration and temperature. Therefore, the plan of next inspection will be established with compositively considering those at once.

Present time there are many risk analysis method in the world. A hazard is an exposure that has the potential to induce and adverse event. Risk is the probability of an adverse event given exposure to hazard. The evaluation of scientific information on the hazardous properties of environmental agents and the extent of exposure to these agents. But operation risk analysis method is not enough for manufacturing industry even if it is existence, it will be separated to improve Safety. In this paper, I will develop the AHP Weighted operation risk analysis method to improve Safety.

Ten years have passed since the establishment of KOSHBA(Korea Small and medium enterprises Hybrid Business Association), KOSHBA is composed of over 400 regional groups; over 4,000 enterprises are participating in the association. This paper deals with a survey on the present status of the participating companies in HBA of Kangwon province including the motivation of participation, participating period, and the purpose of participation. The survey results show that they are participating in HBA for manpower interchange, information gathering, mutual utilization of management resources, and their company's growth. To become a dynamic and vital association, it is necessary to share, learn, and discuss their managerial problems based on mutual trust and respect at the regular monthly meeting.

The likelihood of failure by the corrosion of high temperature H2S/H2, which affect to a risk of facilities, was analyzed through the risk based-inspection using API-581 BRD. We found that the corrosion rate was increased as temperature and H2S concentration were increased. Also, the technical module subfactor(TMSF) was increased as an used you increased, material thickness decreased, inspection number decreased, and inspection effectiveness increased. In these conditions, the maximum value of TMSF was not varied, but the TMSF was sensitively varied at low temperature for high concentration of H2S.

This paper is to introduce guidelines for risk management and analysis. International tandards such as IEC 60300-3-9, IEC 61511-3, ISO 14971-1 and ISO/IEC Guide 73 are considered. This study is to discuss risk analysis of technological systems, and guidelines in the application of hazard and risk analysis for functional safety instrumented system, and risk management of medical devices, and guidelines for use in risk management standards.

해난사고 선박의 구난환경 위험성 분석을 위한 극치조석 산정을 연구하였다. 본 연구에서는 표준항에서 관측된 해면변위에서 주요 4대분조(M2조, S2조, K1조, O1조)의 진폭과 극치조석의 진폭을 산정하고, 조석 공간분포의 균일성에 근거한 유추(inference)방법을 이용하여 둘 간의 상관관계를 수치모델로 계산된 주요 4대분조의 공간분포에 적용함으로써 극치조석의 공간분포를 산정하였다. 극치조석의 분포는 한국 남해를 대상으로 산정하였으며, 50년 주기와 100년 주기의 극치조석을 각각 산정하였다. 한국 남해의 50년 주기 극치조석 진폭은 70cm~260cm의 분포를 보였으며, 100년 주기 극치조석 진폭은 80cm~270cm의 분포를 보였다. 극치조류의 유속은 100년 주기의 경우 평균상태 조류 유속에 비하여 약 1.55배 강한 것으로 나타났다.

The likelihood of failure for the thinning of high temperature sulfide and naphthenic acid corrosion, which affect to a risk of facilities, was analyzed through the risk based inspection using API-581 BRD. We found that the corrosion rate was increased with increasing temperature and total acid number(TAN). And maximum value of the technical module subfactor(TMSF) was not varied with operating condition, but the TMSF was sensitively changed at the range of low temperature, low flow rate, and high TAN. Also, the TMSF was increased as an used year and inspection effectiveness increased, but it was increased as thickness, inspection number, and over design decreased.

The purpose of this study is to examine the prevalence of musculoskeletal disorders and ergonomic risk factors for workers of printing business. A self-reporting survey and task analysis using video camera were performed to identify ergonomic risk factors associated with musculoskeletal disorders. We used the OWAS, RULA, and REBA methods to quantify the risk factors, and the results show that the printing business have high risk of work-related musculoskeletal disorders.

Likelihood of failure for the external corrosion of carbon and low alloy steels, which affect to a risk of facilities, was analyzed quantitatively through the risk based inspection using API-581 BRD. We found that the technical module subfactor (TMSF) decreased as the inspection number increased and it increased as the Inspection effectiveness and the used year increased. In this condition, the TMSF showed high value for the case of the marine/cooling tower drift area as a corrosion driver, poor quality of coating, no insulation, and low insulation condition.

지진취약도 분석을 통하여 교량의 지진 위험도를 평가하였다. 지진취약도 분석에서는 교각 하부의 소성힌지의 거동을 주요 손상인자로 분석하였으며, 또한 한반도 지진재해지도를 근거로 하여 지진발생확률을 산정한 후 이들을 이용하여 교량의 성능단계에 따른 손상발생확률을 분석하였다. 이 연구에서는 교각에 직접 전달되는 지진이 아닌 암반노두에서의 지진의 최대지반가속도에 대하여 지진취약도를 분석하였으며, 비선형 지진해석을 위해서는 층상지반의 영향으로 증폭된 지진하중을 고려하였다. 제안된 방법으로 예제교량의 지진위험도를 분석하였으며, 면진받침이 설치된 교량에 대한 지진 위험도의 저감 효과를 정량적으로 분석하였고, 지진재해지도에서의 조건이 다른 지역에 시공되는 경우의 지진위험도를 분석함으로써 현 시방서의 타당성을 간접적으로 검토하였다.

다양한 리스크문제가 발생하고 있는 기업 환경 속에서 세계선도 기업들은 이미 효과적인 리스크 관리시스템의 운영을 통하여 기업의 손실을 최소화함으로써 이윤을 극대화하고 있으나 우리 기업들은 아직 그렇지 못한 실정이다. 본 연구에서는 리스크 경영 시스템(Risk Management System : RMS)의 구성에 따른 분석 기법들의 적용범위, 용어 개념과 절차등을 비교, 분석하여 우리 기업들이 가지고 있는 리스크문제를 효과적으로 관리할 수 있는 대안 모색을 가능하도록 하는 기초 자료를 제시하고자 한다.

Likelihood of failure (LOF) for the external corrosion of stainless steel, which affect to a risk of facilities, was analyzed quantitatively through the risk based inspection using API-581 BRD. We found that the technical module subfactor (TMSF) decreased as the inspection number increased and it increased as the inspection effectiveness and the used year increased, and that the TMSF showed high value for the case of the marine/cooling tower drift area as a corrosion driver, In this condition, the LOF for the external corrosion of stainless steel had lower than that for the carbon and low alloy steels

Currently, Ministry of Environment has promulgated and executed 'the legislation of indoor air quality for public facilities' but the data of indoor air pollutant for public facilities of this law was very insufficient. Therefore, collection of data for indoor air pollutants and execution for risk assessment in order to offer scientific data for decision-making of policy to present reasonable standards and preventive techniques of engineering were required. Therefore, this study collected and re-analysed the articles of exposure assessment for indoor environment in journals related environment in Korea since 1990 and estimated the safety factor on residents in public facilities. The objective of this study was to offer scientific data for decision-making of policy for improvement and management of indoor air quality in Korea. As the results of this study, the risk assessment for the critical pollutants in CTE (central tendency exposure) showed that safety factors according to pollutants were less than 1 which means safe level in micro-environments. It was investigated that the safety factors of CO in hospital, NO2 in terminal, PM10 and NO2 in subway station respectively were over than 1 in RME (reasonable maximum exposure). Through the results, it was investigated that health risk by inhalation of criteria and guideline air pollutants in domestic public facilities was not high. It should be considered effect of inhalation by other hazardous air pollutants because this study was examined just partial pollutants. Presentation of scientific data for expansion of study is requisite and active research of health risk assessment about indoor air quality.

The quantitative evaluation method of the safety management cost was suggested to prevent a gas accident as a major industrial accident. In a gas governor station, process risk assessments such as the fault tree analysis(FTA) and the consequence analysis were performed. Based on process risk assessments, potential accident costs were estimated and the cost-benefit analysis(CBA) was performed. From the cost-benefit analysis for five classification items of safety management cost, the order of the cost/benefit ratio was estimated.

Risk analysis is a formal deductive procedure for determining combinations of component failures and human errors that could result in the occurrence of specified undesired events at the system level. This method can be used to analyze the vast majority of industrial system reliability problems. This study deals with the application of knowledge-engineering and a methodology for the assessment ＆ measurement of reliability, availability, maintainability, and safety of industrial systems using FTA(fault tree analysis), A fuzzy methodology for fault-tree evaluation seems to be an alternative solution to overcome the drawbacks of the conventional approach (insufficient Information concerning the relative frequencies of hazard events). To improve the quality of results, the membership functions must be approximated based on heuristic considerations, The purpose of this study is to describe the knowledge engineering approach, directed to integrate the various sources of knowledge involved in a FTA.

Foods constitute a large portion of heavy metal exposure toward general population and attract a deep concern with respect to assuring human health. This study summarized published data in Korea on the content and dietary intake of heavy metals and assessed their risk potential in comparison with foreign data. An analysis for the yearly fluctuation of metal contents including arsenic, cadmium, mercury and lead by food group (marine fishes, coastal shellfishes, freshwater fishes, cereal grains) exhibited a decreasing trend from the 1970s to the 1990s. When compared with domestic standards of heavy metals, their mean contents were below the limit and their maximum values seldom exceeded the limit. The data on the dietary intake of heavy metals by Koreans showed a decreasing trend from the 1980s to the 1990s. The average intakes of As and Hg were 6-8% and those of Cd and Pb were 50-80% of PTWI(provisional tolerable weekly intake), all of which were below the tolerance. As the extreme intakes of these metals may exceed the PTWI, a careful assessment for them may be necessary. Dietary intakes of Cd, Hg and Pb by Koreans lie in the mid-level among countries cited in the GEMS/Food monitoring data. As fishery foods are suspecious of contamination with Hg, Cd and As, and foods in general are with Pb, it is necessary to establish legal limits for these metals and monitor any progress of their contamination. Furthermore, overall assessment of exposure to heavy metals from all sources including foods, air, drinking water and occupation should be made in order to confirm the dietary risk factors and to assure the safety of food resources.

MM진도(Modified Mercalli Intensity) V이상의 한반도 지진자료에 의거하여 서울 수도권일원 (위도 37.0^{circ}~37.8^{circ} N, 경도 126.5^{circ}~127.5^{circ} E) 의 확률론적인 지진위험도가 점지진원방법에 의해 추정되었다. 전지진자료를 이용하여 추정된 지진위험도는 비교적 완전하다고 여겨지는 조선시대이후의 지진자료를 이용하여 추정된 지진위험도보다 더 낮다고 추정되었다. 수평지반가속도 0.1g 이상의 파괴적인 지진은 90% 초과확률로서 전지진자료와 조선시대이후의 지진자료가 이용되었을 때 각각 500년과 200년 기간에 발생한다.