검색결과

검색조건
좁혀보기
검색필터
결과 내 재검색

간행물

    분야

      발행연도

      -

        검색결과 321

        161.
        2007.02 KCI 등재 구독 인증기관 무료, 개인회원 유료
        The likelihood of failure for the stress corrosion cracking (SCC) of caustic cracking, which affect to a risk of facilities, was analyzed through the risk based-inspection using API-581 BRD. We found that SCC of the caustic cracking was occurred above 5 % NaOH concentration, and the technical module subfactor (TMSF) was maximized for above 50 % concentration. The heat traced and monitoring were not sensitive to the TMSF with NaOH concentration and temperature. But the steam out was more of less affect minimum value of the TMSF. Also, the inspection number, the inspection effectiveness, and the year since inspection were very sensitive to the TMSF with NaOH concentration and temperature. Therefore, the plan of next inspection will be established with compositively considering those at once.
        4,300원
        162.
        2006.12 KCI 등재 구독 인증기관 무료, 개인회원 유료
        산림유역 조건에 따른 붕괴 토사량을 측정하여 사면 붕괴가능성을 평가하고 붕괴위험 지역에 대한 예지기술(豫知技術)을 개발함으로서 산지사면에서 발생하는 각종 재해에 대한 피해를 최소화 할 수 있는 산림유역 관리에 대한 기술적 기초 자료를 제공하고자 연구하였다. 붕괴 위험지역을 평가한 결과 I급지(매우 위험지역)는 화성암지 역으로 침엽수림이며 임령은 20년생 이하, 토심은 30cm 이하, 토성은 사질식양토(SCL), 석력함량은 31~40%, 사면방위는 남~동(S~E)사면, 주하천길이는 2,501~3,500m, 총하천수는26~30개, 총하천길이는5,501~10,000m, 하천차수는 3차수, 일차하천수는 11~15개 또는 16개 이상, 사면경사는 31˚이상의 지역으로 평가되었고, II급지(위험지역)는 변성암지역으로 활엽수림이며 임령은 21~24년생, 토심은31~40cm, 토성은 미사질식양토(SiCL) 또는 사질식양토(SCL), 석력함량은 11~20%, 사면방위는 남~서(S~W)사면, 주하천길이는 1,501~2,500m, 총하천수는 6~10개, 총하천길이는 3,501~5,500m, 하천차수는 2차수, 일차하천수는 6~10개, 사면경사는 31˚이상의 지역으로 평가되었으며, III급지(비 위험지역)는 퇴적암지역으로 임상은 혼효림, 임령은 25년생 이상, 토심은 41~50cm, 토성은 미사질식양토(SiCL), 석 력함량은 10% 이하, 사면방위는북~서(N~W)사면, 주하천길이는 500m 이하, 총하천수는 5개 이하, 총하천길이는 1,000m 이하, 하천차수는 1차수, 일차하천수는 2개 이하, 사면경사는 25˚이하의 지역으로 평가되었다. 붕괴위험 예측치를 이용하여 붕괴위험지역을 예지한 결과 점수의 합계가 I급지는 4.8052점 이상이며 II급지는 4.8051점에서 2.5602점 사이에 해당하며 III급지는 2.5601점 이하의 지역으로 분석되었다.
        4,000원
        163.
        2006.11 구독 인증기관 무료, 개인회원 유료
        Corporations are faced with the key strategic task of adopting a comprehensive management system of a new paradigm in order to enhance their products' quality, safety, and reliability, as well as to minimize the cost of quality. The purpose of this paper is to present a methodology that can be used by corporations to ensure a product's reliability, safety, and maintainability, with minimal costs, by measuring dependability levels and conducting DEA analysis. The methodology will be a way for corporations to adopt an optimal dependability management system based on a quality management system of ISO 9001:2000 standards.
        4,000원
        166.
        2006.06 KCI 등재 구독 인증기관 무료, 개인회원 유료
        고강도 재료(고강도 콘크리트, 고강도 철근)가 사용된 철근콘크리트 부재의 전단파괴모드는 보통강도 재료를 사용한 부재의 전단파괴모드와 상이한 결과를 나타낼 수 있다. 고강도 재료가 사용될 경우에 구조설계기준식에서 요구하는 전단보강철근이 먼저 항복한 후에 콘크리트가 압축파괴하는 것과는 다르게, 철근이 항복하기 이전에 콘크리트가 압축파괴할 수 있다. 이 논문에서는 고강도 재료가 사용된 철근콘크리트 부재의 최대철근비를 균형파괴시의 재료의 응력 및 변형률 상태를 이용하여 계산하였다. 제안식에서 최대철근비는 콘크리트의 압축강도와 전단보강철근의 상호관계에 의하여 변화하였다. 제안식은 97개의 철근콘크리트 부재에 대한 실험결과와 비교되었다. 실험결과 및 계산결과는 철근콘크리트 부재의 파괴모드가 전단보강철근의 양과 콘크리트의 압축강도와 밀접한 관계가 있음을 나타내었다.
        4,000원
        168.
        2006.04 구독 인증기관·개인회원 무료
        Capping mechanisms during the compaction of pharmaceutical powders were explored. Both experimental and numerical investigations were performed. For the experimental study, an X-ray Computed Microtomography system has also used to examine the internal failure patterns of the tablets produced using a compaction simulator. Finite element (FE) methods have also been used to analyse the powder compaction. The experimental and numerical studies have shown that the shear bands developed at the early stage of unloading appear to be responsible for the occurrence of capping. It has also been found that the capping patterns depend on the compact shape.
        169.
        2006.04 KCI 등재 구독 인증기관 무료, 개인회원 유료
        This paper deals with two forms of preventive replacement policy with minimal repair at failure. Those are, 1. the replacement policy I based on the cumulative operating time. 2. the replacement policy II based on the number of failures. The basic assumptions are; (1) the cost of minimal repair at failure is increasing with the number of failures since the last replacement, (2) the equipment fails stochastically with time.
        4,800원
        170.
        2006.04 KCI 등재 구독 인증기관 무료, 개인회원 유료
        The likelihood of failure by the corrosion of high temperature H2S/H2, which affect to a risk of facilities, was analyzed through the risk based-inspection using API-581 BRD. We found that the corrosion rate was increased as temperature and H2S concentration were increased. Also, the technical module subfactor(TMSF) was increased as an used you increased, material thickness decreased, inspection number decreased, and inspection effectiveness increased. In these conditions, the maximum value of TMSF was not varied, but the TMSF was sensitively varied at low temperature for high concentration of H2S.
        4,000원
        171.
        2006.03 KCI 등재 구독 인증기관 무료, 개인회원 유료
        본 논문에서는 내구성과 수명을 획기적으로 향상시키기 위해 제3세대 건설재료인 섬유강화 플라스틱(FRP) 소재로 제작된 사각형 중공 교량 바닥판의 파괴모드를 실험과 해석을 통해 분석하였다. 재하시험 결과 바닥판의 강축방향의 거동은 파괴 직전까지도 거의 선형탄성적으로 거동한 반면, 약축방향의 거동은 재하초기부터 작은 하중하에서도 큰 비선형성을 보였다. 이 약축방향 비선형성의 원인은 웨브와 플랜지 연결부의 불완전한 일체거동으로 인한 소성거동 때문인 것으로 판단된다. 웨브와 플랜지의 연결부에 소성힌지를 도입한 간단한 구조모델을 이용하여 이를 확인하였다. 접착부의 박리 파괴 가능성도 검토하였으나 이는 대상 중공바닥판의 약축방향 파괴에 직접적으로 관여하는 것은 아닌 것으로 판단된다 약축방향의 구조거동을 개선시키기 위한 방안으로 내부를 폼으로 충전하는 방법을 제시하였으며 그 가능성을 구조해석을 통해 확인하였다.
        4,200원
        172.
        2005.10 구독 인증기관 무료, 개인회원 유료
        This study is to provide comparative analysis for failure and problem at energy technology induction. Skill fare contract company which enforce in Korea institute of energy research (KIER), Industries, learned circles, research institute assignment company, bright prospect van company, bluechip medium and small enterprises company etc., chose technology induction connection company 200 companies. These company into compensation question investigation enforce. Question contents with company's general item, composed by problem that face in technology induction, part for failure of technology induction.
        3,000원
        173.
        2005.10 KCI 등재 구독 인증기관 무료, 개인회원 유료
        The likelihood of failure for the thinning of high temperature sulfide and naphthenic acid corrosion, which affect to a risk of facilities, was analyzed through the risk based inspection using API-581 BRD. We found that the corrosion rate was increased with increasing temperature and total acid number(TAN). And maximum value of the technical module subfactor(TMSF) was not varied with operating condition, but the TMSF was sensitively changed at the range of low temperature, low flow rate, and high TAN. Also, the TMSF was increased as an used year and inspection effectiveness increased, but it was increased as thickness, inspection number, and over design decreased.
        4,000원
        177.
        2004.12 KCI 등재 구독 인증기관 무료, 개인회원 유료
        Likelihood of failure for the external corrosion of carbon and low alloy steels, which affect to a risk of facilities, was analyzed quantitatively through the risk based inspection using API-581 BRD. We found that the technical module subfactor (TMSF) decreased as the inspection number increased and it increased as the Inspection effectiveness and the used year increased. In this condition, the TMSF showed high value for the case of the marine/cooling tower drift area as a corrosion driver, poor quality of coating, no insulation, and low insulation condition.
        4,000원
        179.
        2004.09 KCI 등재 구독 인증기관 무료, 개인회원 유료
        Likelihood of failure (LOF) for the external corrosion of stainless steel, which affect to a risk of facilities, was analyzed quantitatively through the risk based inspection using API-581 BRD. We found that the technical module subfactor (TMSF) decreased as the inspection number increased and it increased as the inspection effectiveness and the used year increased, and that the TMSF showed high value for the case of the marine/cooling tower drift area as a corrosion driver, In this condition, the LOF for the external corrosion of stainless steel had lower than that for the carbon and low alloy steels
        4,000원
        180.
        2004.06 KCI 등재 SCOPUS 구독 인증기관 무료, 개인회원 유료
        고준위 방사성폐기물 처분장에서 적용하고 있는 다중 방벽의 한 부분인 처분 용기는 벤토나이트 완충재의 팽윤과 지압으로부터 폐기물을 역학적으로 안정하게 보호함과 동시에 일정 기간 방사성폐기물의 유출을 억제하는 역할을 한다. 처분용기의 건전성은 엄격한 재질 선정과 품질 보증을 통해 확보된다. 그러나 용기 제작 과정이나 수송 중 예상치 못한 사건으로 인해 불량 용기가 발생할 가능성이 있다. 본 논문에서는 이와 같은 경우 방사성폐기물로 인해 생태계에 미치는 환경 영향을 연간 개인 선량으로 평가하였다. 연구결과 일부 불량 처분 용기가 발생하더라도 현 평가에 사용한 입력 데이터 범위에서는, 국내 고준위 방사성폐기물 처분 개념이 방사선적 안전성을 확보할 수 있는 것으로 판명되었다.
        4,000원