본 논문에서는 컨테이너선의 선형 최적 설계 자동화와 관련하여 연구한 내용과 결과를 정리하였다. 컨테이너선은 일반적으로 프루우드 수 0.26 근처에서 운항하는 선박으로 이 속도에서 운항하는 선박 전용 선형 최적 설계 자동화를 구현하기 위하여 최적화 알고리 즘, 선형 변경 알고리즘, 선박 성능 예측 알고리즘, 자동화 알고리즘 그리고 반복적 계산 기법을 적용하여 컨테이너선의 선형 최적 설계 자동화가 가능한 수치해석 컴퓨터 프로그램을 개발하였으며, HOTCONTAINER라고 명명하였다. 본 연구에서는 선형 최적 설계를 위한 설 계 변수의 적절한 선정을 위하여 민감도 분석 알고리즘을 개발하여 적용하였다. 개발된 선형 최적 설계 자동화 알고리즘의 신뢰성과 실 선 적용성을 파악하기 위하여 세계적으로 다양한 연구가 진행된 컨테이너 선박인 KCS 선박을 대상 선박으로 하여 선형 최적 설계 자동 화 수치해석을 수행하여 그 결과물로써 최적 선박을 도출하고, 대상 선박과 최적 선박의 조파저항과 파계 그리고 파고를 비교하였다. 결 론적으로 최적 선박이 대상 선박과 비교하여 조파저항이 47.63% 감소한 것을 볼 수 있었으며, 배수량과 접수 표면적은 각각 0.50%, 0.39% 감소한 것을 볼 수 있었다.

In this study, the load fluctuation of the main engine is considered to be a disturbance for the jacket coolant temperature control system of the low-speed two-stroke main diesel engine on the ships. A nonlinear PID temperature control system with satisfactory disturbance rejection performance was designed by rapidly transmitting the load change value to the controller for following the reference set value. The feed-forwarded load fluctuation is considered the set points of the dual loop control system to be changed. Real-coded genetic algorithms were used as an optimization tool to tune the gains for the nonlinear PID controller. ITAE was used as an evaluation function for optimization. For the evaluation function, the engine jacket coolant outlet temperature was considered. As a result of simulating the proposed cascade nonlinear PID control system, it was confirmed that the disturbance caused by the load fluctuation was eliminated with satisfactory performance and that the changed set value was followed.

The purpose of this study was to develop an optimized hull-form of a coastal fishing vessel operating at high speed. In order to achieve the purpose of the study, HOTBOAT, that can perform an automatic hull-form optimal design of a coastal fishing vessel, was developed. HOTBOAT was composed of an objective function estimation algorithm and an optimization algorithm and a hull-form modification algorithm. In this study, the wave-making resistance was selected as an objective function and the potential-based panel method was applied to predict the objective function. SQP(sequential quadratic programming) method were adopted to predict the optimal direction and answer. Bell-shaped hull-form modification function method and NURBS(non-uniform rational B-spline) geometry modeling method were applied to modify the hull-form during the whole optimization process. HOTBOAT was applied to develop the optimal hull-form of a coastal fishing vessel with minimum wave resistance. The initial hull-form of the coastal fishing vessel was compared with the optimal hull-form. As a result of hull-form optimization, a coastal fishing vessel with a reduction of about 30% was developed compared with the initial hull-form and the displacement and the wetted surface area of the optimal hull-form was decreased to less than about 1% in comparison with the initial hull-form.

본 논문에서는 초고층 건물의 철근콘크리트 아웃리거 벽체 개구부의 최적설계를 위한 수학적 최적화 프레임워크를 제시하였다. 전용 유한요소해석 프로그램을 이용하여 아웃리거 벽체를 해석하였으며 깊은 보의 스트럿-타이 거동을 고려하여 개구부를 배치하였다. 최적화를 위해 파이썬 SciPy 라이브러리 중 순차이차계획법(Sequential Quadratic Programming)을 이용하여 제약 경계 최적화를 수행 하였다. 최적화에 필요한 미분가능한 연속 함수를 얻어내기 위해 선형 보간법을 사용하였으며, 최적화 프로그램의 효율성을 위해 데이터베이스를 이용하였다. 2변수 최적화의 결과를 탐색 알고리즘의 이동 경로를 통해 살펴본 결과 알고리즘이 최적화된 결과를 효율적으로 찾아냄을 확인하였다. 그리고 개구부의 폭을 모두 같게 설정한 것이 아닌 각각의 개구부의 크기를 개별 변수로 설정하였을 경우 목적함수의 값이 최소화되어 더 우수한 최적화 결과를 도출함을 확인하였다. 또한, 최적화의 과정에 있어 데이터베이스를 이용할 경우 최적화 시간을 효과적으로 단축시킬 수 있음을 확인하였다.

The purpose of this study is to investigate the interrelationship of how the ship's wave resistance performance changes with the change of the longitudinal position of the section line in the ship's lines, and to find a way to use it in the hull-form design. To this end, we developed a hull-form automatic change algorithm that can maintain the proper hull-form while moving the section lines in the longitudinal direction, and the computer program for a numerical analysis was developed to apply the developed algorithm. By applying the developed hull-form automatic change algorithm and the wave resistance performance prediction program, the numerical analysis package was constructed. The numerical analysis was carried out for the passenger ship. Numerical analyzes were carried out by moving the section lines of the passenger ship in the longitudinal direction, and the results were compared with each other. Based on the numerical results, we attempted to investigate the correlation between the section line movement and the wave resistance performance.

Seismic performance of ordinary reinforced concrete shear wall systems commonly used in high-rise residential buildings is evaluated. Three types of shear walls exceeding 60m in height are designed by performance-based seismic design. Then, incremental dynamic analysis is performed collapse probability is assessed in accordance with the procedure of FEMA P695. As a result, story drift, plastic rotation, and compressive strain are observed to be major failure modes, but shear failure occur little. Collapse probability and collapse margin ratio of performance groups do not meet requirement of FEMA P695. It is observed that critical wall elements fail due to excessive compressive strain. Therefore, the compressive strain of concrete at the boundary area of the shear wall needs to be evaluated with more conservative acceptance criteria.

This paper describes a preliminary ship design optimal design method in the process of hull form design. In the deterministic approach, an interdisciplinary ship design method integrates principal dimension decisions and hull form variations in the preliminary ship design stage. Integrated ship design, as presented in this paper, has the distinctive feature that these parameters are evaluated simultaneously. Conversely, in sequential design, which is based on the traditional preliminary ship design process, hull form designs and principal dimension decisions are determined separately and sequentially. The current study adopts the first method to enhance the design quality in the early design stage.

PURPOSES: Safety consciousness can be the first factor to hinder the acceptance of design alternative, which moderates the applied design criteria in order to adapt the road to the natural terrain condition. METHODS : The method which enables to check the safety of design alternative by using design consistency concept is suggested. The method is based on the linked or interactive analysis between terrain and road alignment. Real design example is considered as a guide how to apply the method and the analysis result is discussed with the future research. RESULTS: Suggested method can be used for designers as a tool to review their design outputs can be safe as much as the original design. So, designers have the more objective judgement on their designs and have the confidence on their designs. CONCLUSIONS : The method is expected to be used as a tool to see the safety consciousness in an objective view, so any possible conflicts between designers and design-related personnels caused by the terrain-oriented design can be solved.

레벨셋 기법과 위상민감도를 이용하여 선형 탄성 구조물에 대하여, 초기 설계형상에 의존성이 없는 위상 및 형상 최적설계 기법을 개발하였다. 레벨셋 기법에서는 복잡한 위상 형상변화를 쉽게 다루기 위해 초기 영역은 고정한 채 레벨셋 함수로 표현되는 암시적 이동경계로 경계를 표현한다. 해밀턴-자코비(H-J) 방정식과 수치적으로 강건한 기법인 ‘up-wind scheme’은 컴플라이언스 목적함수를 최소화시키고 허용체적 제약조건을 만족시키면서, 초기 암시적 경계를 법선 속도장에 따라 최적의 형상으로 이끌어 낸다. 점근적인 정규화 개념에 근거하여, 구멍의 반지름을 0으로 접근시켜 형상 미분의 극한을 취한 위상민감도를 고려하였다. 최적조건으로부터 유도된 라그란지안의 감소 방향을 이용하여 H-J 방정식을 갱신하기 위한 속도장을 결정하였다. 개발한 방법에서는 위상민감도로부터 얻어지는 지표를 이용하여 구멍을 언제든지 어디에서나 생성가능하기 때문에 초기 구멍이 최적 형상을 얻기 위해 요구되지 않는다는 사실을 확인하였다. 또한 효율적인 최적화 과정을 위해서는 구멍 생성을 위한 조정변수의 적절한 선택이 중요함을 확인하였다.

PURPOSES : The lack of details of design guideline for zig-zag shaped section approaching central bus stop leads an traffic accident proneness. So, this study analysed the geometric elements of central bus stop area in terms of vehicle dynamics and suggested design alternatives. METHODS: The study analysed a dynamic behaviour of bus moving in and out of zig-zag shaped section using Auto-Turn under scenarios. Based upon dynamic analysis, the study found out the width of overtaking lane is the most influential factor for a safe moving at zig-zag alignment. RESULTS : The width of overtaking lane at design speed of 40, 50, and 60 km/h respectively was suggested given taper ratio of 1 to 10 required for Bus Rapid Transit (BRT), and the lane width is not wider than 4.0m which possibly makes two vehicles using the same lane. Also, the width of overtaking lane which mitigates the taper ratio was suggested with the same restriction about the maximum lane width. CONCLUSIONS: The results of the study can be used to prepare a design guideline on zig-zag shaped alignment of central bus exclusive lanes. The more stable moving is expected by applying the design alternatives suggested, therefore the lower rate of traffic crashes at the vicinity of central bus stops.

This study develops an efficient numerical algorithm to predict wave-resistance performance of a catamaran hull. The developed numerical algorithm is applied to evaluate wave-resistance performance for two different twin hull forms with a asymmetric and a symmetric mono hull. Numerical calculations and model tests are compared to validate a developed numerical algorithm adopted in the current work. Comparisons are carried out through the sinkage at the bow and stern, the trim and the wave-making resistance coefficient. Model test is performed in order to verify the numerical results. The comparative analysis study regarding hydrodynamic characteristic of different twin hull forms is worthy of application in the catamaran hull form development stage.

PURPOSES: Road Design Consistency Evaluation can guarantee road alignments with safety factors, however it can be hard work to deal with general car accident factors in only this evaluation index. Ideal Road Design Consistency Evaluation is show the mutual balance of road alignment and human factors with a variety of factors for road safety. METHODS: This study carried out overall road safety evaluations which are methods of running speeding consistency and car platoon safety analysis (driver's behaviors factors) as well. RESULTS: Out of 13 sections in a experimental road layout, safety factors of 8 sections showed 'Good' or 'Fair' status. However, 'Poor' results were found out in 5 sections. Particularly, it showed the different outcomes among the 4 evaluation methods used in this study. CONCLUSIONS: Road safety countermeasures were proposed for the potentially dangerous sections in road which failed to identify in the other methods. This study will contribute toward future study of more reliable Road Design Consistency Evaluation in the future for road safety.

A level set based topological shape optimization method for nonlinear structure considering hyper-elastic problems is developed. To relieve significant convergence difficulty in topology optimization of nonlinear structure due to inaccurate tangent stiffness which comes from material penalization of whole domain, explicit boundary for exact tangent stiffness is used by taking advantage of level set function for arbitrary boundary shape. For given arbitrary boundary which is represented by level set function, a Delaunay triangulation scheme is used for current structure discretization instead of using implicit fixed grid. The required velocity field in the actual domain to update the level set equation is determined from the descent direction of Lagrangian derived from optimality conditions. The velocity field outside the actual domain is determined through a velocity extension scheme based on the method suggested by Adalsteinsson and Sethian(1999). The topological derivatives are incorporated into the level set based framework to enable to create holes whenever and wherever necessary during the optimization.

비선형 시간이력응답해석에서 입력지진동은 구조물의 탄소성 지진응답을 결정짓는 중요한 요소이다. 시간이력해석에 사용되는 기록지진동파형은 지진발생 메카니즘, 전달경로, 지반의 성질에 따른 여러 가지 인자가 복잡하게 관련되어 있기 때문에 구조물의 지진응답해석에 사용될 일반성을 갖는 입력지진동을 선정하는 것은 매우 어려운 문제이다. 본 논문은 실무에서 내진설계용 지진동으로 가장 선호하지 않는 입력지진동을 선정하여 인공지진동파형을 작성하였다. 인공지진동은 기록지진동과 동일한 위상각을 가지며, 감쇠정수 h=5%일 때의 설계용 스펙트럼과 거의 일치하도록 작성되었다. 기록지지동과 인공지진동을 입력한 1자유도계의 탄성 및 탄소성 지진 응답해석을 수행하여 탄소성 응답스펙트럼 및 입력에너지 응답 특성을 분석하였다. 본 연구에서 작성된 인공지진동은 건축구조물의 탄소성 지진응답해석용 입력지진동으로 충분히 타당성이 있다고 사료된다.