Forged part made of Cold heading quality wire materials are used for automotive brake systems. The cost reduction of forged products is a major issue because of the strict shape change. A series of studies were conducted to minimize the cost of EPB spindle process among brake parts. In order to reduce the material cost, heat treatment-abbreviated material was applied and the formability on the processes was verified by the ductile fracture theory. In addition, the causes of shape fixation and die life degradation were analyzed using the numerical simulation. The process cost has been minimized by re-designing process, changing the product shape, and the die material.

The steel pipe manufacturing industry deals with facilities and materials. Especially thermal facilities are close to vapor cloud explosion (VCE) and may cause secondary damage to facilities because they deal with corrosive substances such as hydrofluoric acid, sulfuric acid and acid, fire, explosion, leakage etc. It is in danger. In this study, hazard identification method was conducted using HAZOP techniques and quantitative risk analysis was conducted using e-CA, a program that supports accident impact analysis. Equipment in the influence range of ERPG - 3 was determined to be a facility requiring replacement. It was decided that neutralization is necessary using slaked lime. Based on the cost of loss, We presented the proper replacement which is the timing of the dangerous facility. As a result, It was ideal to replace the facilities with 20 years of heat treatment facilities, one year of hydrofluoric acid storage tank, 20 years of sulfuric acid storage tank, and 5 years of hydrochloric acid storage tank.

SCM activities in a company are considered as total innovation through synchronizing supply and demand while maintaining appropriate inventory level and reducing the business operating costs. Until now, even several researches are carried out on the SCM performance of the companies which have introduced and been operating SCM, the research on the cost analysis for the inventory which occurs frequently on supply chain is still insufficient. Especially, for the electronics industry in which the product depreciation is sharp caused by the short product life cycle and the complexity of distribution channels, even the inventory related costs are a major factor in business management, since the current estimated criteria of inventory costs are limited to the interest and maintenance management costs, the criteria do not reflect the total influence of the product depreciation and lost opportunity cost which are related to the business management. Furthermore, even though the rapid price drops of the distributor inventory caused by the frequent new model launch can be covered by the product manufacturers, the scale of total costs related to the inventory has not been conceived because the price compensation is traditionally considered as a market costs.In this research, we analyzed the inventory characteristics of electronics industry in which the price depreciation happens frequently, newly defining the estimated criteria of the product total inventory cost which includes price depreciation from the product manufacturers’ view. Finally we focus on the case study of a representative electronics company and verify the scale of the influence on management performance.

본 연구에서는 높은 기체선택도를 가지는 폴리이미드의 제조를 위해 2,2-bis(3,4-carboxylphenyl) hexafluoropropane과 두 종류의 아민인 2,4,6-Trimethyl-1,3-phenylenediamine (DAM)과 4,4-Methylenedianiline (p-MDA)을 이용하여 합성을 진행한 후 비용매 상전이법으로 비대칭 분리막을 제조하였다. 분리막 제조에 사용된 용매에 따른 물성변화를 확인하기 위하여 고분자 용액의 점도, 흐림점 측정을 통한 고분자의 상평형도, 비용매 상전이 계수 측정을 진행하였다. 상전이법을 이용하여 제조된 분리막은 SEM을 통해 용매 휘발시간에 변화에 따른 모폴로지를 확인하였고 이의 변화에 따른 기체 투과도 변화를 확인하였다. 기체투과도는 디메틸아세트아마이드를 사용하였을 때보다 N-메틸-2-피롤리돈을 사용하였을 때 CH4, N2, O2, CO2의 투과도와 각 기체에 대한 선택도가 높은 것을 확인하였다. 또한 용매 휘발 시간이 길수록 기체 투과도는 감소하지만 기체에 대한 선택도가 증가하는 것을 확인하였다.

용매 비용매 치환 상전이 공정과 증기 유도 상전이 공정을 결합하여 성능이 향상된 폴리술폰 정밀역과막을 제조 하였다. 본 연구에서 제조된 비대칭막은 폴리술폰(고분자), 디메틸 포름아미드(용매), 폴리비닐리돈(친수성 고분자 첨가제), 폴 리에틸렌글리콜(극성 고분자 액상 첨가제)로 이루어진 혼합 용액에 디메틸술폭사이드(극성 아프로틱 비용매), 물(극성 프로틱 비용매 첨가제)을 첨가하여 제막용 캐스팅 용액을 물과 이소프로판올 혼합용액에 침지하여 얻었다. 극성 아프로틱 비용매와 극성 프로틱 비용매의 첨가는 멤브레인의 구조를 제어하는데 유용한 방법이며 이를 습윤 공기를 캐스팅 용액에 노출시켜 준 응고상태를 만들어줌으로써 멤브레인의 내부 구조를 제어하고자 하였다. 또한 응고조의 조성을 물/이소프로판올의 혼합비를 통하여 조절하였다. 순수 투과도, 기공 크기 분포도, 표면 친수도 및 구조 분석이 이루어졌으며, 그 결과 평균 기공의 크기를 거의 0.2 μm 정도 향상시키는 효과를 가져왔으며 수 투과 유량 또한 1000-1800 LMH 정도 향상시키는 결과를 나타내었다.

The successful and sustainable growth of SMEs depends on their ability of strengthen their competitiveness in quality and cost and service more than anything else as a fundamental of operation. Among these key competitive factors of SMEs, quality is the most critical factor in manufacturing business fields. There are many different ways to improve the quality performance but it needs proper management decision to choose the best way what can maximize outputs with minimum inputs. And it needs effective measurement methods and some indicators to analysis the quality performance properly. The quality cost is one of the simplest key indicators to measure the quality performance and the effectiveness of quality related management decisions. In this study, through survey on local SMEs, we found that their average annual quality cost ratio versus turnover - total amount of annual quality cost divided by annual turnover - is around 3.69% excluded some SME's performances what have different quality control measures with others. And we found some results what corresponded with the early studies on the correlations between those categorized quality costs factors and some discrepancies between some of the literature model and the early case study results as follows. There were negative correlations between the Prevention costs and the External failure costs, and the Appraisal costs and the External failure costs, and there was positive correlation between the Appraisal costs and Internal failure costs same as early studies. But, we couldn't found any strong negative correlations between the Cost of control - Prevention costs & Appraisal costs - and the Cost of Failure of control - Internal & External failure costs -.

The existent system of management for Measurement of Safety Cost are not effective because of the data loss and time loss and occurrence of errors through manual calculation. Therefore, tile development of the software for measurement of safety cost can solve the problem through the systematic calculation for safety cost and converting the related data to database, and also can build the strategy of the investment of Safety cost through analysing and comparing with the past data in the database. As a part of development of the software of Measurement of Safety Cost which is appropriate for the domestic environment, this study is developing a software based on Noguji method, which is one of the methods of Measurement of Safety Cost, and to appraise the efficiency of the management of Measurement of Safety Cost we will implement and improve the software in the case of the domestic enterprises.

The existent system of management for Measurement of Safety Cost are not effective because of the data loss and time loss and occurrence of errors through manual calculation. Therefore, the development of the software for measurement of safety cost can solve the problem through the systematic calculation for safety cost and converting the related data to database, and also can build the strategy of the investment of Safety cost through analysing and comparing with the past data in the database. As a part of development of the software of Measurement of Safety Cost which is appropriate for the domestic environment, this study is developing a software based on Noguji method, which is one of the methods of Measurement of Safety Cost, and to appraise the efficiency of the management of Measurement of Safety Cost we will implement and improve the software in the case of the domestic enterprises.

환노출과 재무부실과의 관계를 분석하기 위해 환노출과 기업의 재무부실의 관계를 Logit 모형을 이용하여 92년에서 98년 10월까지 기간에 상장 제조기업을 대상으로 분석하였다. 전체기간 분석에서는 환노출 계수가 유의적이지 않았으나 98년 1월에서 10월 사이에 재무부실이 발생한 기업을 대상으로 한 분석에서는 환노출이 재무부실을 예측하는 유의적인 변수로 나타났다. 분석결과 원/달러 환율 상승이 기업가치의 하락을 가져오는 음(-)의 방향의 환노출이 크게 나타난 기업의 재무부실 가능성이 높았다. 환율 변동 방향을 구분하여 추정한 환노출을 이용하여 분석한 결과 환율의 상승시에 나타나는 환노출이 재무부실 발생과 관련이 있는 것을 확인할 수 있었다. 이러한 분석 결과는 환노출이 재무부실의 예측에 중요한 요인이 되고 있음을 의미하는 것으로 기업의 재무부실 비용을 줄이기 위해 환위험 혜지가 필요하다는 기존의 분석적 연구 결과를 지지하는 것이다.

폴리이미드(6FDA-p-TeMPD) 비대칭막을 습식 상분리법으로 제조하는데 있어서 그 구조에 미치는 용매 (DMAc, NMP, 1,4-dioxane)와 비용매(H2O, Methanol, n-hexane)의 영향을 고찰하였다. 고분자/용매/비용매 분리 속도를 예측함으로써 생성된 비대칭막의 구조를 해석하였다. 용해도 곡선이 용매-고분자 축에 가깝고, 응결값이 작으며, 광투과도가 즉시 감소하고, 용해도 계수차가 ΔδS-NS > ΔδP-NS > ΔδP-S 순이면 생성막은 고분자 결절의 불연속 결집속에 finger-like pore가 형성되었다. 용해도 곡선이 용매-고분자 축에서 멀고, 응결값이 크며, 상분리 시간이 길고, 용해도 계수차 Δδi-j 가 ΔδP-NS >(ΔδS-NS < > ΔδP-S) 일때, 생성되는 막은 미소 고분자 결절구가 치밀하게 응집된 표피가 있으며, 고분자 연속상 스폰지층에 macropore가 발달되었다. 용해도 곡선이 용매-고분자 축으로부터 멀리 떨어지고, 응결값이 대단히 크며, 상분리 시간이 길고, 용해도 계수차 Δδi-j가 ΔδS-NS > (ΔδP-NSlessgtr)ΔδP-S인 경우는 고분자 미소 결절의 두터운 응집층과 다음에 성근 결절응집층이 나타났다.