This study focused on improving the phase stability and mechanical properties of yttria-stabilized zirconia (YSZ), commonly utilized in gas turbine engine thermal barrier coatings, by incorporating Gd2O3, Er2O3, and TiO2. The addition of 3-valent rare earth elements to YSZ can reduce thermal conductivity and enhance phase stability while adding the 4-valent element TiO2 can improve phase stability and mechanical properties. Sintered specimens were prepared with hot-press equipment. Phase analysis was conducted with X-ray diffraction (XRD), and mechanical properties were assessed with Vickers hardness equipment. The research results revealed that, except for Z10YGE10T, most compositions predominantly exhibited the t-phase. Increasing the content of 3-valent rare earth oxides resulted in a decrease in the monoclinic phase and an increase in the tetragonal phase. In addition, the t(400) angle decreased while the t(004) angle increased. The addition of 10 mol% of 3-valent rare-earth oxides discarded the t-phase and led to the complete development of the c-phase. Adding 10 mol% TiO2 increased hardness than YSZ.

자기공명영상(MRI) 장비의 조영제로 흔히 사용되는 가돌리늄(Gd)은 매우 안정된 상태로 하수처리과정에서 거의 제거되지 않고 수환경으로 유입된다고 알려져 있다. 따라서 본 연구에서는 세 가지의 공법으로 하수처리를 하는 부산 수영 하수처리장에서 채취한 하수 시료의 공정별 용존 희토류 원소의 제거율 및 수환경으로 배출되는 인위적 기원 Gd (Gdanth)의 배출량을 평가하고자 하였다. 용존 희토류 원소는 공정별 처리 단계에 따라 무거운 희토류 원소(Tb-Lu)에 비 해 가벼운 희토류 원소(La-Eu)에서 농도가 감소하는 경향을 보였다. 또한 일부 시료에서 나타난 음의(negative) Sm anomaly (<1)는 생물학적 제거 과정에서 Sm이 입자나 인산염과 흡착되어 함께 제거되었을 가능성을 시사한다. 모든 시 료에서 양의(positive) Gd anomaly (149±50, n=9)를 보였으며, 공정별로 측정된 Gd의 총 농도 중 Gdanth은 약 97% 이 상을 차지하는 것으로 나타났다. 이는 하수처리과정에서 Gdanth 이 거의 제거되지 않고 수영강 하류로 배출된다는 것을 의미한다. 일별 처리용량을 고려하여 각 공정에서 배출되는 Gdanth의 배출량은 259 mmol/day로 추정할 수 있다. 본 연 구의 결과는 하수처리장을 통해 수영만 연안으로 Gdanth이 지속적으로 배출될 것으로 예상되며, 향후 Gd의 중장기적인 관측이 필요함을 시사한다.

Rare earth elements, which are important components of motors, are in high demand and thus constantly get more expensive. This tendency is driven by the growth of the electric vehicle market, as well as environmental issues associated with rare-earth metal manufacturing. TC 298 of the ISO manages standardization in the areas of rare-earth recycling, measurement, and sustainability. Korea, a resource-poor country, is working on international standardization projects that focus on recycling and encouraging the domestic adoption of international standards. ITU-T has previously issued recommendations regarding the recycling of rare-earth metals from e-waste. ISO TC 298 expands on the previous recommendations and standards for promoting the recycling industry. Recycling-related rare earth standards and drafts covered by ISO TC 298, as well as Korea’s strategies, are reviewed and discussed in this article.

SrMoO4:RE3+ (RE=Dy, Sm, Tb, Eu, Dy/Sm) phosphors are prepared by co-precipitation method. The effects of the type and the molar ratio of activator ions on the structural, morphological, and optical properties of the phosphor particles are investigated. X-ray diffraction data reveal that all the phosphors have a tetragonal system with a main (112) diffraction peak. The emission spectra of the SrMoO4 phosphors doped with several activator ions indicate different multicolor emissions: strong yellow-emitting light at 573 nm for Dy3+, red light at 643 nm for Sm3+, green light at 545 nm for Tb3+, and reddish orange light at 614 nm for Eu3+ activator ions. The Dy3+ singly-doped SrMoO4 phosphor shows two dominant emission peaks at 479 and 573 nm corresponding to the 4F9/2→6H15/2 magnetic dipole transition and 4F9/2→6H13/2 electric dipole transition, respectively. For Dy3+ and Sm3+ doubly-doped SrMoO4 phosphors, two kinds of emission peaks are observed. The two emission peaks at 479 and 573 nm are attributed to 4F9/2→6H15/2 and 4F9/2→6H13/2 transitions of Dy3+ and two emission bands centered at 599 and 643 nm are ascribed to 4G5/2→6H7/2 and 4G5/2→6H9/2 transitions of Sm3+. As the concentration of Sm3+ increases from 1 to 5 mol%, the intensities of the emission bands of Dy3+ gradually decrease; those of Sm3+ slowly increase and reach maxima at 5 mol% of Sm3+ ions, and then rapidly decrease with increasing molar ratio of Sm3+ ions due to the concentration quenching effect. Fluorescent security inks based on as-prepared phosphors are synthesized and designed to demonstrate an anticounterfeiting application.

희토류(Rare Earth) 함량이 높은 TRU 생성물 중의 RE 원소를 감소시키기 위하여 RE 원소와 UCl3의 산화반응을 이용한 RE 제거 공정의 타당성을 HSC Chemistry 코드를 이용하여 검토하였다. 사용후핵연료에 포함된 TRU 원소 및 RE 원소의 조성 및 열역학적 자료를 검토하였으며, UCl3와의 산화 반응에 따른 평형 자료를 계산하여 공정 가능성을 검토하였다. 실제 파이로 프로세싱 처리를 가정한 물질수지로부터 TRU 생성물의 RE 함량이 다른 두 가지 경우에 대하여 RE 원소 제거율과 TRU 회수율을 평가하였다. TRU 생성물을 산화제인 UCl3와 반응시켰을 때 각 원소의 Gibbs free energy의 차이에 의한 선택적 산화 반응이 일어났다. 투입된 UCl3 양을 조절하여 TRU 회수율을 최대로 유지하면서도 RE 원소를 제거하여 최종생성물의 TRU/ RE 비를 증가시킬 수 있는 가능성을 계산 결과로 확인하였다. 본 연구의 결과들은 열역학적 평형 자료에 기반한 결과이므로 실제 공정에 적용하기에는 많은 차이점이 존재한다. 그러나 TRU 물질을 취급하기 어려운 환경에서 파이로프로세싱의 TRU 생성물을 고속로의 핵연료로 공급하기 위한 공정 설계에 중요한 자료로 활용될 것으로 기대된다.

In this research, the magnetic abrasive finishing process using (Nd-Fe-B) permanent magnet was applied to confirm the performance and to find the optimum conditions. The STS304 bar was used as the specimen in this experiment. In order to confirm the performance of magnetic abrasive finishing process, the surface roughness (Ra) and diameter reduction were measured when the specimens were processed under the conditions of rotational speeds, frequencies, and magnetic pole shapes. The rotational speeds were varied at 8000rpm, 15000rpm, 20000rpm, and 25000rpm. And the frequencies were changed to 0Hz, 4Hz and 10Hz. Also the shapes of the magnetic pole were changed to flat edge, sharp edge and round edge. It can be concluded that the surface roughness (Ra) and diameter reduction were found to be the best at 25000rpm, 4Hz, flat edge.

Since the ISO decided to deal with rare-earth elements at the 298th Technical Committee (TC) in 2015, Korea has participated in four plenary meetings and proposed four standards as of June 2019. The status of ISO TC 298, the standards covered by the TC, and the standardization strategies of Korea are summarized. Korean delegations are actively engaged in WG2, which deals with recycling, proposing four standards for fostering the rare-earth recycling industry. However, the participation of domestic experts is still low compared with the increase in the number of working groups and the number of standards in TC 298. The aim of this article is to summarize the current status of ISO international standards related to rare-earth elements, to encourage relevant experts to participate in standardization, and to develop international standards that accurately reflect the realities of the industry.

Layered LiNi0.83Co0.11Mn0.06O2 cathode materials single- and dual-doped by the rare-earth elements Ce and Nd are successfully fabricated by using a coprecipitation-assisted solid-phase method. For comparison purposes, nondoping pristine LiNi0.83Co0.11Mn0.06O2 cathode material is also prepared using the same method. The crystal structure, morphology, and electrochemical performances are characterized using X-ray diffraction (XRD), scanning electron microscopy (SEM), energy dispersive spectrometer (EDS) mapping, and electrochemical techniques. The XRD data demonstrates that all prepared samples maintain a typical α-NaFeO2-layered structure with the R-3m space group, and that the doped samples with Ce and/or Nd have lower cation mixing than that of pristine samples without doping. The results of SEM and EDS show that doped elements are uniformly distributed in all samples. The electrochemical performances of all doped samples are better than those of pristine samples without doping. In addition, the Ce/Nd dualdoped cathode material shows the best cycling performance and the least capacity loss. At a 10 C-rate, the electrodes of Ce/Nd dual-doped cathode material exhibit good capacity retention of 72.7, 58.5, and 45.2% after 100, 200, and 300 cycles, respectively, compared to those of pristine samples without doping (24.4, 11.1, and 8.0%).

We report a method for preparing rare earth oxides (RexOy) from the recycling process for spent Ni-metal hydride (Ni-MH) batteries. This process first involves a leaching of spent Ni-MH powders with sulfuric acid at 90℃, resulting in rare earth precipitates (i.e., NaRE(SO4)2·H2O, RE = La, Ce, Nd), which are converted into rare earth oxides via two different approaches: i) simple heat treatment in air, and ii) metathesis reaction with NaOH at 70℃. Not only the morphological features but also the crystallographic structures of all products are systematically investigated using field-emission scanning electron microscopy (FESEM) and X-ray diffraction (XRD); their thermal behaviors are also analyzed. In particular, XRD results show that some of the rare earth precipitates are converted into oxide form (such as La2O3, Ce2O3, and Nd2O3) with heat treatment at 1200℃; however, secondary peaks are also observed. On the other hand, rare earth oxides, RExOy can be successfully obtained after metathesis of rare earth precipitates, followed by heat treatment at 1000℃ in air, along with a change of crystallographic structures, i.e., NaRE(SO4)2·H2O → RE(OH)3 → RExOy.

Rare earth elements (REEs) are considered to be vital to modern industry due to their important roles in applications such as permanent magnets, automobile production, displays, and many more. The imbalance between demand and supply of REEs can be solved by recycling processes. Regarding the needs of industry and society, the International Organization for Standardization, Technical Committee 298 (ISO/TC298) Rare Earths has been recently launched for developing international standards on rare earth elements. In accordance with the suggestion of its constituents, it is tentatively working to develop the appropriate standards under five working groups (WG) on terms and definitions (WG1), element recycling (WG2), environmental stewardship (WG3), packaging, labelling, marking, transport, and storage (WG4), and testing analysis (WG5). The scope and structure of ISO/TC298 on the topic of rare earths is discussed in this document.

산업과 의학이 발전되면서 많은 인구는 삶의 질에 관심을 가지게 되었다. 건강에 대한 시각이 높아지면서 육류보다 채식 또는 식물성 오일을 선호하게 되었다. 오늘날 주로 니켈 촉매를 사용한 공정이 개발되면서 식물성 오일의 보존기간이 늘어나고 이동성이 편리해졌다. 현재 유지경화용 니켈 촉매는 외국기업이 세계시장을 장악하고 있다. 한편, 국내 니켈 촉매의 대량 생산 기술은 퇴보 되어 전량 외국에서 수입하고 있는 실정이다. 따라서 활발한 기초연구가 필요하고 국내에서 상용화 할 수 있는 촉매개발이 필요하다. 본 연구는 수소화 반응으로부터 유지경화에 기반이 되는 니켈을 주 활성 촉매제로 사용하였고, 희토류가 촉매의 활성에 주는 영향을 알아보았다. 일정량의 희토류는 니켈의 분산을 유도하여 효율을 증가시키고 조촉매로써 사용이 가능하였다.

Volatile organic compounds (VOCs) are a source of air pollution and are harmful to both human health and the environment. In this study, we fabricated polyurethane/rare earth (PU/RE) composite nanofibrous membranes via electrospinning with the aim of removing VOCs from air. The morphological structure of PU/RE nanofibrous mats were investigated using FE-SEM, EDX, and XRD experimental analyses. A certain amount of RE (up to 50 wt% compared to PU pellets) particles could be loaded on/into PU fibers. The PU nanofiber containing 50 wt% RE powder had the smallest fiber diameter of 356 nm; it also showed the highest VOCs absorption capacity compared with other composite membranes, having an absorption capacity about 3 times greater than pure PU nanofibers. In addition, all of the PU/RE nanofibrous membranes readily absorbed styrene the most, followed by xylene, toluene, benzene and chloroform. Therefore, the PU/RE nanofibrous membrane can play an important role in removing VOCs from the air, and its development prospects are impressive because they are emerging materials.

사용후핵연료 파이로프로세싱에서는 방사성 희토류 염화물(RECl3)을 함유한 LiCl-KCl 공융염폐기물이 발생되며, 핫셀시설에서 운영을 목적으로 단순한 형태의 공융염폐기물 처리공정을 개발하는 것이 필요하다. 본 연구에서는, LiCl-KCl 공융염폐기물 내 희토류 핵종 분리/고화공정의 단순화를 목적으로 Li2O-Al2O3-SiO2-B2O3계의 무기합성매질을 이용하여 LiCl-KCl 공융 염 내 희토류 핵종(Nd)을 분리한 후 분리생성물을 바로 고화하는 시험을 실시하였다. 공융염 내 희토류 염화물(NdCl3) 대비 0.67의 무게비에 해당하는 무기합성매질의 양으로도 Nd 핵종을 98wt% 이상 분리할 수 있었고, 이 때 얻은 희토류 핵종 포집생성물은 약 50wt% 수준의 희토류 산화물 함량을 보유하고 있었으며, 이 포집생성물을 화학적 내구성이 우수한 단일상의 균질한 유리고화체로 제조할 수 있었다. 이 결과들은 LiCl-KCl 공융염폐기물 내 희토류 핵종의 분리/고화공정을 단순화하기 위한 방안수립에 활용될 수 있을 것이다.

Rare-earth zirconates, such as lanthanum zirconates and gadolinium zirconates, have been intensively investigated due to their excellent properties of low thermal conductivity as well as chemical stability at high temperature, which can make these materials ones of the most promising candidates for next-generation thermal barrier coating applications. In this study, three compositions, lanthanum/gadolinium zirconates with reduced rare-earth contents from stoichiometric RE2Zr2O7 compositions, are fabricated via solid state reaction as well as sintering at 1600oC for 4 hrs. The phase formation, microstructure, and thermo-physical properties of three oxide ceramics are examined. In particular, each oxide ceramics exhibits composite structures between pyrochlore and fluorite phases. The potential of lanthanum/ gadolinium zirconate ceramics for TBC applications is also discussed.

Lanthanum zirconate, La2Zr2O7, is one of the most promising candidates for next-generation thermal barrier coating (TBC) applications in high efficient gas turbines due to its low thermal conductivity and chemical stability at high temperature. In this study, bulk specimens and thermal barrier coatings are fabricated via a variety of sintering processes as well as suspension plasma spray in lanthanum zirconates with reduced rare-earth contents. The phase formation, microstructure, and thermo-physical properties of these oxide ceramics and coatings are examined. In particular, lanthanum zirconates with reduced rare-earth contents in a La2Zr2O7-4YSZ composite system exhibit a single phase of fluorite or pyrochlore after fabricated by suspension plasma spray or spark plasma sintering. The potential of lanthanum zirconate ceramics for TBC applications is also discussed.