In this study, glass fibers are fabricated via a continuous spinning process using manganese slag, steel slag, and silica stone. To fabricate the glass fibers, raw materials are put into an alumina crucible, melted at 1550℃ for 2 hrs, and then annealed at 600℃ for 2 hrs. We obtain a black colored glass. We identify the non-crystalline nature of the glass using an XRD(x-ray diffractometer) graph. An adaptable temperature for spinning of the bulk marble glass is characterized using a high temperature viscometer. Spinning is carried out using direct melting spinning equipment as a function of the fiberizing temperature in the range of 1109℃ to 1166℃ , while the winder speed is in the range of 100rpm to 250rpm. We investigate the various properties of glass fibers. The average diameters of the glass fibers are measured by optical microscope and FE-SEM. The average diameter of the glass fibers is 73 μm at 100rpm, 65 μm at 150rpm, 55 μm at 200rpm, and 45 μm at 250rpm. The mechanical properties of the fibers are confirmed using a UTM(Universal materials testing machine). The average tensile strength of the glass fibers is 21MPa at 100rpm, 31MPa at 150rpm, 34MPa at 200rpm, and 45MPa at 250rpm.

PURPOSES: The object of this study is to select appropriate inorganic materials, and find the best mixing formula to secure fast curing time and enough initial strength, and then to evaluate the durability of the asphalt mixtures according to the degree of addition of the compound manufactured by the determined blending ratio. METHODS : The breaking time and reactivity between seven kinds of inorganic minerals, and the selected recycled aggregate and emulsified asphalt were compared to determine the best initial curing strength for the mixtures. Then, three inorganic materials were chosen as the materials that provide good breaking time and reactivity, and the best mixing formula for the three materials was determined. The chemical composition of the compound manufactured using the mixing formula was analyzed by energy dispersive x-ray system method. Finally, indirect tensile strength (ITS) test was performed (for two days) at room temperature to determine the proper amount of additives that will provide the best initial strength. RESULTS: From the results of the reactivity test, the best mixing formula (A:C:G = 60:30:10) for the three selected inorganic materials with short braking time and high reactivity was determined. The four types of cold reclaimed asphalt mixtures for ITS testing were manufactured by adding the inorganic material compounds at 0%, 3%, 5%, and 7%, and the ITS values were measured after two curing days. The ITS values at 5% and 7% were 0.308 MPa and 0.415 MPa, respectively. The results of quality control tests (Marshall stability, porosity, flow value, etc.) at 5% and 7% satisfied the specification criterion for the cold recycled asphalt mixtures. CONCLUSIONS : The selected inorganic materials (A, C, and G) and the best mixing formula (A:C:G = 60:30:10) accelerated the reaction with emulsified asphalt and shortened the curing time. Depending on the inorganic material used, the breaking time and reactivity can be directly related or unrelated. This is because of the chemical compositions of recycled aggregates, infiltrated foreign matter, and chemical reactions between the inorganic materials and other materials. Therefore, it is important to select the proper materials and the best mixing formula when evaluating the characteristics of the practically used materials such as recycled aggregates, inorganic materials, and emulsified asphalt.

PURPOSES : The purpose of this study is to examine the manufacturing method for emulsified asphalt and its bond performance by analyzing the properties of the emulsifier used to produce cold recycled asphalt mixtures. METHODS: In this study, four types of slow-setting cationic emulsifiers, a microsurfacing emulsifier, and six types of nonionic emulsifiers were used to manufacture emulsified asphalt. Because each emulsifier requires its own unique effective dose to provide the best performance, the optimum asphalt content for each effective dose was determined. Then, the optimum asphalt content for the emulsified asphalt mixture was determined by the tests to check its basic physical properties. By using the determined optimum content, asphalt mixtures were manufactured and dynamic immersion and tensile strength tests were conducted on the mixtures to analyze the influence of the emulsifier on the physical properties of the mixtures. RESULTS : The dynamic immersion test results showed a coating ratio of 54-85%, which is considerably higher than that of using ordinary straight asphalt. The tensile strength test yielded noncompliant values less than 0.4 N/mm, which is the standard requirement for dry indirect tensile strength. The correlation analysis between the dynamic immersion and tensile strength ratio tests showed very high correlation of 0.78. The correlation between the emulsifier content and water resistance performance was low, between -0.55 and -0.24. CONCLUSIONS : While the storage stability improves with increasing emulsifier, the effectiveness proportional to the increase is weaker as the emulsifier increases. The performance testing of asphalt residues before and after manufacturing the emulsified asphalt showed no significant change. It is proved that the emulsified asphalt maintains high coating resistance according to the dynamic immersion test results. In addition, according to the results of tensile strength ratio, cold recycled asphalt mixtures manufactured by the materials normally and commercially used are not compliant with the national standard specification; thus, additional effective materials will be needed for quality compliance. In conclusion, it is evident that the dynamic immersion and tensile strength ratio tests have good correlation, but the quantity of emulsifiers used is not related to the level of moisture resistance.

PURPOSES: The objective of this study is to evaluate the properties of eco-friendly waterproofing materials for bridge decks. METHODS: Various waterproofing materials and construction methods that are widely used in Korea were evaluated. Then, the problems in field application were identified. In order to solve these problems, it is necessary to improve constructability and stability. Thus, the properties of heating waterproofing membranes and waterproofing systems using recycling additives were evaluated. In addition, a field test was conducted to ensure the construct-ability and stability. RESULTS AND CONCLUSIONS : Waterproofing materials were developed using waste tires and carbon black the results of the softening point test, tensile adhesion test, and shear adhesion test. A new sheet system, which consists of mesh and vinyl, was also determined from the sheet test. The properties of waterproofing materials were better than those developed under the "A Asphalt Concrete Pavement Construction Guidelines" according to the results of laboratory tests and the report of the authorized testing agency. Finally, the field test showed that the materials met quality standards. In future research, it will be necessary to conduct continuous field tests and follow-up inspections.

2017년 고리 1 호기 영구정지를 계기로 국내 원자력발전소의 해체가 점차 가시화되고 있다. 앞으로 원전 해체가 본격적으로 추진될 경우 원전 1기 당 약 16만 t의 콘크리트 폐기물이 발생될 것으로 예측되었으며, 이들 콘크리트 폐기물은 대부분 오염 준위가 매우 낮아 자체처분 대상으로 고려될 수 있다. 따라서, 국내 자체처분 폐기물(원자력안전위원회 고시 2017-65호에 따른 자체처분 허용농도 또는 자체처분 허용선량을 만족하는 폐기물)에 대한 현행 규제체계가 대량의 콘크리트 폐기물에 대한 무제한적 자체처분에 대해서도 유효성을 유지할 수 있는지를 사전에 확인할 필요가 있다. 이와 관련, 국내 자체처분 규정 개발 시 참조기준인 IAEA SRS No. 44를 심층분석하고, 국내 산업계 현황을 반영한 입력값과 계산식을 이용하여 4가지 자체 처분 시나리오에 대한 예상 피폭방사선량을 평가하였다. 그 결과, 재활용 시나리오에 대한 예상선량은 대부분 정상 시나리오에 대한 자체처분 선량 기준(즉, 0.01 mSv·y-1)보다 낮은 것으로 평가되었으나, 성토 후 거주 시나리오의 경우 보수적인 가정을 적용하면 자체처분 선량 기준을 초과할 가능성도 배제할 수 없는 것으로 나타났다. 따라서, 대량의 해체 콘크리트 폐기물의 안전하고 지속가능한 자체처분을 위해서는 폐기물 처리업체 다변화, 성토 시나리오에 대한 보다 구체적인 평가, 성토를 통한 자체처분에 대한 부분적 제한조건 설정 등을 고려할 수 있다.

PURPOSES: Using recyclable materials in asphalt pavement industry is one of the essential tasks not only for saving construction budgets but also for mitigating environmental pollutions. Over the past decades, several efforts have been made by road maintenance agencies to incorporate various recyclable materials into virgin asphalt paving mixtures. As a result, reclaimed asphalt pavement (RAP), which consists of old pavement material was selected as one of most widely used recyclable materials. In this paper, the effects of using different amounts of single-recycled RAP (SRRAP) and double-recycled RAP (DRRAP) on the low-temperature characteristics of asphalt mixtures were investigated. METHODS: To evaluate the low-temperature characteristics of SRRAP and DRRAP mixtures, two experiments, the bending beam mixture creep test and semicircular bending fracture test were performed. The experimental parameters: creep stiffness, m-value, thermal stress, critical cracking temperature, fracture energy, and fracture toughness were computed then compared. RESULTS : RAP mixtures (SRRAP or DRRAP) showed lower mechanical performance compared with conventional asphalt mixtures. The differences became distinct with increased RAP addition. However, the performance differences between SRRAP and DRRAP mixtures were not significant in all cases, which indicate the possible application of re-recycling technology (DRRAP) in the asphalt pavement industry. CONCLUSIONS : The addition of RAP to virgin asphalt can mitigate low-temperature performance despite the improvement in fracture performance observed in some cases. Therefore, using RAP (SRRAP or DRRAP) mixtures on inter or sublayer construction, but not on the surface layer, is recommended. Moreover, the possibility of applying double-recycling technology in asphalt pavement industry can be introduced in this study because not significant performance differences were found between SRRAP and DRRAP mixtures especially at low temperature.

During indoor air conditioning, cold condensate is generated. But until recently, this condensate has not been recycled. This experiment and research is on the technology of the condensed water recycling in air conditioning. This study demonstrates the effect of condensate recycling, contributes to energy saving and water use reduction. For this purpose, the test equipment was installed to measure the temperature of the condensate generated in the fan-coil unit, and the performance of the high-pressure pump to be applied to the cooling pipe was examined. As a result, the water quality and energy saving effect.

PURPOSES: Using recycled asphalt materials (called Reclaimed Asphalt Pavement: RAP) from existing asphalt pavement layers in newly constructed asphalt pavement is an essential option not only for lowering the construction budget but also for mitigating environmental pollution for society. For this reason, many pavement agencies in South Korea, the USA, and Canada have observed the effect of RAP on conventional asphalt pavement to evaluate and set proper material specifications and addable amounts. In this paper, effect of recyclable material on low-temperature performance of asphalt materials was investigated with two different mechanical tests. Among the recyclable material sources, RAP and Taconite Aggregate (TA), which is mainly produced in northern Minnesota (USA), were considered. METHODS : To evaluate the low-temperature mechanical performance of a RAP mixture, two different experimental tests (In-Direct Tensile (IDT) low temperature creep test and Semi-Circular Bending (SCB) test) were considered. The mechanical parameters creep-stiffness, relaxation modulus, fracture energy, and fracture toughness were computed then compared. RESULTS: More brittle characteristics were observed with RAP-added asphalt mixtures compared to the conventional asphalt mixtures, as expected. However, the differences of computed mechanical performances were not significantly distinct for RAP mixtures compared to conventional mixtures when the RAP proportion was around 20%, and with the addition of TA up to 20%. CONCLUSIONS : It can be concluded that up to 20% of RAP addition (along with TA up to 20%) in a virgin asphalt mixture does not provide significant performance reduction. This addable proportion can be viewed as a successful minimum level when considering the addition of RAP to hot-mix asphalt (HMA). Moreover, applying TA with RAP could offer a successful alternative for asphalt recycling and the materials industry.

PURPOSES: The objective of this study is to evaluate the physical properties of recycled asphalt mixtures reinforced with glass fiber. METHODS: Firstly, mixing design was conducted on recycled asphalt mixture for use of 50% recycled aggregate. Various laboratory tests were performed on four types of recycled asphalt mixtures with different glass fiber content to evaluate the physical properties. The laboratory tests include indirect tensile strength test, dynamic modulus test, Hamburg wheel tracking test and tensile-strength ratio to evaluate cracks, rutting and moisture resistance of mixtures. RESULTS: The indirect tensile strength of fiber reinforced glass increased about 139.4%. As a result of comparing the master curves obtained by the dynamic modulus test, the elasticity was low in the low temperature region and high in the high temperature region when the glass fiber was reinforced. The glass fiber contents of PEGS 0.3%, Micro PPGF 0.1% and Macro PPGF 0.3% showed the highest moisture resistance and rutting resistance. CONCLUSIONS : The test results show that use of glass fiber reinforcement can increase the resistance to cracking, rutting, and moisture damage of asphalt mixtures. It is also necessary to validate the long-term performance of recycled asphalt mixtures with glass fiber using full scale pavement testing and field trial construction.

PURPOSES: This study determined the optimal usage rate of RAP (reclaimed asphalt pavement) using cold central-plant recycling (CCPR) on a road-surface layer. In addition, a mixture-aggregate gradation design and a curing method based on the proposed rate for the surface-layer mix design were proposed. METHODS: First, current research trends were investigated by analyzing the optimum moisture content, mix design, and quality standards for surface layers in Korea and abroad. To analyze the aggregate characteristics of the RAP, its aggregate-size characteristics were analyzed through the combustion asphalt content test and the aggregate sieve analysis test. Moreover, aggregate-segregation experiments were performed to examine the possibility of RAP aggregate segregation from field compaction and vehicle traffic. After confirming the RAP quality standards, coarse aggregate and fine aggregate, aggregate-gradation design and quality tests were conducted for mixtures with 40% and 50% RAP usage. The optimum moisture content of the surface-layer mixture containing RAP was tested, as was the evapotranspiration effect on the surface-layer mixture of the optimum moisture content. RESULTS: After analyzing the RAP recycled aggregate size and extraction aggregate size, 13-8mm aggregate was found to be mostly 8mm aggregate after combustion. After using surface-chipping and mixing methods to examine the possibility of RAP aggregate segregation, it was found that the mixing method contributed very little for 3.32%, and because the surface-chipping method applied compaction energy directly as the maximum assumption the separation ratio was 15.46%. However, the composite aggregate gradation did not change. Using a 40% RAP aggregate rate on the surface-layer mixture for cold central-plant recycling satisfied the Abroad quality standard. The optimum moisture content of the surface-layer mixture was found to be 7.9% using the modified Marshall compaction test. It was found that the mixture was over 90% cured after curing at 60℃ for two days. CONCLUSIONS : To use the cold central-plant recycling mixture on a road-surface layer, a mixture-aggregate gradation design was proposed as the RAP recycled aggregate size without considering aggregate segregation, and the RAP optimal usage rate was 40%. In addition, the modified Marshall compaction test was used to determine the optimum moisture content as a mix-design parameter, and the curing method was adapted using the method recommended by Asphalt Recycling & Reclaiming Association (ARRA).

PURPOSES: The purpose of this study is to evaluate the mechanical properties of a cold-recycling asphalt mixture used as a base layer and to determine the optimum emulsified-asphalt content for ensuring the mixture’s performance. METHODS: The physical properties (storage stability, mixability, and workability) of three types of asphalt emulsion (CMS-1h, CSS-1h, and CSS-1hp) were evaluated using the rotational viscosity test. Asphalt emulsion residues, prepared according to the ASTM D 7497-09 standard, were evaluated for their rheological properties, including the G*/sinδand the dynamic shear modulus (|G*|). In addition, the Marshall stability, indirect tensile strength, and tensile-strength ratio (TSR) were evaluated for the cold-recycling asphalt mixtures fabricated according to the type and contents of the emulsified asphalt. RESULTS: The CSS-1hp was found to be superior to the other two types in terms of storage stability, mixability, and workability, and its G*/sinδ value at high temperatures was higher than that of the other two types. From the dynamic shear modulus test, the CSS-1hp was also found to be superior to the other two types, with respect to low-temperature cracking and rutting resistance. The mixture test indicated that the indirect tensile strength and TSR increased with the increasing emulsified-asphalt content. However, the mixtures with one-percent emulsified-asphalt content did not meet the national specification in terms of the aggregate coverage (over 50%) and the indirect tensile strength (more than 0.4 MPa). CONCLUSIONS : The emulsified-asphalt performance varied greatly, depending on the type of base material and modifying additives; therefore, it is considered that this will have a great effect on the performance of the cold-recycling asphalt pavement. As the emulsified-asphalt content increased, the strength change was significant. Therefore, it is desirable to apply the strength properties as a factor for determining the optimum emulsified-asphalt content in the mix design. The 1% emulsified-asphalt content did not satisfy the strength and aggregate coverage criteria suggested by national standards. Therefore, the minimum emulsified-asphalt content should be specified to secure the performance.

PURPOSES : The purpose of this study is to estimate the optimum content of an inorganic additive for cold-recycled asphalt mixtures and evaluate its performance. METHODS: An indirect tensile test, a tensile-strength ratio test, and an indirect tensile-fatigue test were conducted on cold-recycling asphalt mixtures with various additives. RESULTS: The laboratory performance tests indicated that granulated blast-furnace slag mixed with inorganic and cement activators provided optimum performance. The performance results of the cold-recycled asphalt pavement were similar to the inorganic and cement activators’ performance in terms of the indirect tensile strength, tensile strength ratio, and indirect tensile-fatigue test. CONCLUSIONS : Overall, the performance of a cold-recycled asphalt mixture using inorganic additives and emulsion asphalt was comparable to a warm-recycled asphalt mixture. However, more experiments aimed at improving its performance and studying the effect of the inorganic additives must be conducted.

PURPOSES : The purpose of this study is to analyze the performance life of hot central plant recycling (HCPR) and hot in-place recycling (HIR) pavements applied to the National Highway for the past 20 years and compare it with conventional hot-mix asphalt (HMA) pavement. METHODS: In order to analyze the performance life of recycling asphalt pavements, a comprehensive literature review was conducted to investigate the government law and official system for the use of recycling asphalt pavement in Korea and foreign countries. Next, the application information of using a hot central plant recycling and hot in-place recycling pavements in the national highway is collected from the database of pavement management system (PMS) and then their field condition is visually surveyed. Finally, the performance life of recycling asphalt pavements in the national highway is analyzed and compared with conventional hot-mix asphalt pavement. RESULTS: Institutions are encouraging the promotion of using recycled asphalt pavement through various legal systems in Korea as well as abroad. Based on analysis results for the average performance life of hot central plant recycling pavement applied to the national highway, the average performance life is estimated to be 10.2 years. However, the average performance life of in-place recycling pavement is estimated to be 6.5 years. However, it is expected to increase performance life after the HIR construction system is modified. CONCLUSIONS : Based on the limited data analysis of the performance life of recycled asphalt pavements, HCPR shows similar performance life to conventional asphalt pavement but HIR shows shorter performance life than conventional asphalt pavement. However, it is noted that all performance life data is very limited and it should be monitored and analyzed further.

이상기후의 원인으로 주목되는 온실가스 배출 억제를 위하여 세계 각 국가들은 1992년 유엔기후변화협약 발효, 2005년 교토의정서 발효, 2015년 파리기후협약을 체결하였다. 온실가스 배출 저감을 위한 각종 협약에 따라 우리나라는 2008년부터 2020년까지 온실가스 감축목표를 30%로 설정하였다. 국내의 경우 2016년을 기준으로 생산된 아스팔트 콘크리트는 약 2,300만톤이며, 이중 재활용 아스팔트 혼합물로 재사용된 양은 약 187만톤으로 전체 생산량 대비 약 8.1%에 불과하다. 국내 아스팔트 플랜트 504개 중 208개가 재활용 아스팔트 플랜트로 인증, 운영되고 있으며 추후 사회적, 기술적, 제도적인 변화를 통하여 재활용 아스팔트 혼합물의 사용량이 증가될 것으로 기대된다. 현재 상온 재활용 아스팔트 혼합물은 대부분 시멘트를 첨가하여 생산하고 있다. 시멘트를 첨가제로 사용할 경우 저렴하고 높은 강도를 발현할 수 있지만 시멘트 생산 및 운반과정에서 다량의 이산화탄소가 발생하고 높은 시멘트 사용률로 포장의 조기 균열 발생과 장시간 양생이 필요함에 따라 조기 교통개방이 불가능한 문제점이 발생하고 있다. 따라서 상온 재활용 아스팔트 혼합물 생산 및 시공과정에서 폐 아스팔트의 재사용 및 온실가스 배출 저감에 따른 경제적 효과와 함께 양생시간의 단축과 조기강도 발현을 위한 무기질 첨가제의 연구가 필요하다. 본 연구는 상온 재활용 아스팔트에 적용하는 첨가제를 개발하기 위해 무시멘트와 무기질 첨가제를 적용한 2가지 혼합물을 중온 재활용 아스팔트 혼합물의 실내 공용성 시험 결과와 비교평가 하였다. 실내 공용성 시험을 위하여 선회다짐기와 마샬다짐기를 이용하여 시편을 제작하였으며, 공극률, 간접인장강도, 수분저항성(TSR)시험, 동탄성계수, 피로시험 등의 실내 공용성 평가를 진행하였다. 동탄성계수 시험은 아스팔트 혼합물의 거동과 재료의 특성을 분석하기 위한 시험으로 5개의 온도조건(-10, 5, 20, 40, 54℃)과 6개의 하중 주기(0.1, 0.5, 1, 5, 10, 20Hz)를 통하여 혼합물의 E 와 Master Curve를 도출하였으며, 피로 시험은 10Hz의 사인파 응력을 20℃의 조건에서 시험을 수행하였다. 간접인장강도와 수분저항성(TSR) 시험은 KS F 2398를 준수하여 수행하였다. 상온 재활용 아스팔트는 혼합할 때 물을 사용하여 다짐을 하기 때문에 양생과정 중 수분증발로 추가 공극이 발생한다. 따라서 KS F 2398에 명시된 7±0.5%를 맞추어 수분저항성 시험을 진행하기에는 어려움이 있으므로 시편 공극률의 70∼80% 사이로 수분처리 후 실험을 실시하였다.