본 연구에서는 호흡동조화기법의 대안으로 딥러닝 자유호흡기법에서 b-value 별 겉보기확산계수 값을 평가하고 확 산강조영상과 겉보기확산계수 지도의 해부학적 일치성을 분석하여 적절한 여기횟수 값을 알아보고자 하였다. 연구 방법은 2023년 7월부터 2024년 1월까지 간 자기공명영상 검사가 의뢰된 성인 남녀 35명을 대상으로 하였고 사용 장비는 Magnetom Skyra 3.0T(Siemens, Germany)를 이용하였다. 자유호흡기법의 비교를 위해 b-value 50, 400, 800(s/mm2)의 여기횟수를 각각 딥러닝 호흡동조화기법에서 2,3,4으로 딥러닝을 이용하지 않은 일반 자유호 흡기법에서 4,6,8으로 검사하였다. 딥러닝을 추가한 일반 자유호흡기법에서는 1,2,3 여기횟수, 2,3,4 여기횟수, 3,5,6 여기횟수, 4,6,8 여기횟수로 변화하였다. 연구 결과 딥러닝 자유호흡기법에서 간의 좌엽과 우엽, 담낭의 평균 겉보기확산계수 값은 딥러닝 호흡동조화기법과 비교하여 모두 통계적 유의성을 확인하였다. 한편 정성적 평가의 해 부학적 일치성을 분석한 결과 딥러닝 자유호흡기법의 3,5,6 여기횟수와 4,6,8 여기횟수에서 가장 높은 점수를 얻었 으며 검사 시간에서는 딥러닝 호흡동조화기법과 비교하여 약 51%, 40% 감소하였다. 따라서 간 진단에 있어 딥러닝 자유호흡기법에서 b-value 별 적절한 여기횟수 값을 이용한다면 겉보기확산계수 지도의 정확도 유지와 함께 검사 시간을 감소시킬 수 있어 임상적으로 유용한 검사가 될 것으로 사료된다.

본 연구에서는 T2 터보 스핀 에코 지방 포화 기법 중 딥러닝 기반 T2 터보 스핀 에코 Dixon 기법에서 지방분율에 대한 분석을 통해 정확한 지방 포화가 이루어지는지 알아보고자 하였다. 이에 미국 방사선학회 인증 팬텀을 기준 팬텀으로 설정 하고, 액체 지방 팬텀을 이용하여 일반 T2 지방 포화 기법들과 딥러닝 기반 T2 Dixon 기법의 지방분율을 정량적으로 분석 하였다. 연구 방법은 기준 팬텀 3시 방향에 지방 함유율이 0, 10, 20, 30%인 액체 지방 팬텀을 고정하고, 기법별 액체 지방 팬텀 중심부의 신호강도 값을 도출하였다. 그리고 측정된 값을 지방분율 공식을 이용하여 수치화하였다. 연구 결과 각각의 액체 지방 팬텀의 지방분율 측정에서 T2 Dixon 딥러닝 기법과 Dixon 기법이 다른 일반 지방 포화 기법들과 비교해 기준 지방분율에 가장 근접하였다. 그리고 두 기법 간 통계적 차이는 없어 딥러닝 영상 재구성이 지방 포화에 영향을 미치 지 않음을 알 수 있었다. 따라서 딥러닝 기반 T2 터보 스핀 에코 Dixon 기법은 정확한 지방분율로 지방 포화를 할 수 있어 그 유용성이 있다고 생각한다.

The most important thing in development of a process-based TSPA (Total System Performance Assessment) tool for large-scale disposal systems (like APro) is to use efficient numerical analysis methods for the large-scale problems. When analyzing the borehole in which the most diverse physical phenomena occur in connection with each other, the finest mesh in the system is applied to increase the analysis accuracy. Since thousands of such boreholes would be placed in the future disposal system, the numerical analysis for the system becomes significantly slower, or even impossible due to the memory problem in cases. In this study, we propose a tractable approach, so called global-local iterative analysis method, to solve the large-scale process-based TSPA problem numerically. The global-local iterative analysis method goes through the following process: 1) By applying a coarse mesh to the borehole area the size of the problem of global domain (entire disposal system) is reduced and the numerical analysis is performed for the global domain. 2) Solutions in previous step are used as a boundary condition of the problem of local domain (a unit space containing one borehole and little part of rock), the fine mesh is applied to the borehole area, and the numerical analysis is performed for each local domain. 3) Solutions in previous step are used as boundary conditions of boreholes in the problem of global domain and the numerical analysis is performed for the global domain. 4) steps 2) and 3) are repeated. The solution derived by the global-local iterative analysis method is expected to be closer to the solution derived by the numerical analysis of the global problem applying the fine mesh to boreholes. In addition, since local problems become independent problems the parallel computing can be introduced to increase calculation efficiency. This study analyzes the numerical error of the globallocal iterative analysis method and evaluates the number of iterations in which the solution satisfies the convergence criteria. And increasing computational efficiency from the parallel computing using HPC system is also analyzed.

This study has evaluated the genomic estimated breeding value (GEBV) of the commercial Hanwoo population using the genomic best linear unbiased prediction (GBLUP) method and genomic information. Furthermore, it analyzed the accuracy and realized accuracy of the GEBV. 1,740 heads of the Hanwoo population which were analyzed using a single nucleotide polymorphism (SNP) Chip has selected as the test population. For carcass weight (CWT), eye muscle area (EMA), back fat thickness (BFT), and marbling score (MS), the mean GEBVs estimated using the GBLUP method were 3.819, 0.740, -0.248, and 0.041, respectively and the accuracy of each trait was 0.743, 0.728, 0.737, and 0.765, respectively. The accuracy of the breeding value was affected by heritability. The accuracy was estimated to be low in EMA with low heritability and high in MS with high heritability. Realized accuracy values of 0.522, 0.404, 0.444, and 0.539 for CWT, EMA, BFT, and MS, respectively, showing the same pattern as the accuracy value. The results of this study suggest that the breeding value of each individual can be estimated with higher accuracy by estimating the GEBV using the genomic information of 18,499 reference populations. If this method is used and applied to individual selection in a commercial Hanwoo population, more precise and economical individual selection is possible. In addition, continuous verification of the GBLUP model and establishment of a reference population suitable for commercial Hanwoo populations in Korea will enable a more accurate evaluation of individuals.

한우 개량에 있어서 추정된 유전체육종가와 정확도는 선발에 중요한 지표로 사용되며, 최근 육종가 추정에 있어 정확도의 신뢰도를 높이기 위해 혈통과 유전체정보를 이용한 연구가 활발히 진행되고 있다. 따라서, 본 연구는 가계 내 유전체정보량에 따라 유전체정보가 미포함된 개체의 정확도 변화를 확인하고자 동일한 부모를 가진 한우 10두로 구성된 전형매 가계 3개를 수집하였으며, 각 가계 별로 유전체정보량을 10두, 8두, 6두, 4두, 2두씩 무작위로 선별하여 5가지의 검정집단으로 가정한 후 참조집단 14,225두를 이용하여 single step genomic best linear unbiased prediction (ssGBLUP)을 통해 genomic estimated breeding value (GEBV) 및 정확도를 추정하였다. 각 검정집단과 참조집단의 혈통 및 유전체정보 를 이용하여 H-matrix를 구축하였고, BLUPF90 program을 사용하여 도체중, 등심단면적, 등지방두께, 근내지방도의 GEBV 및 정확도를 추정하였 다. 첫 번째 가계를 대상으로 살펴보면, 검정집단에서 유전체정보를 보유하고 있는 10두의 GEBV 평균 정확도는 도체중 0.734, 등심단면적 0.717, 등지방두께 0.712, 근내지방도 0.745로 추정되었다. 이후 2두씩 무작위로 유전체정보를 제거하여 추정한 GEBV 정확도를 살펴보면, 유전체정보를 보유한 개체의 경우 정확도의 변화가 나타나지 않았지만, 유전체정보가 미포함된 개체의 정확도가 평균 0.114 ~ 0.168 낮게 추정되었다. 가계 내 유전체정보량에 따른 유전체정보가 미포함된 개체의 GEBV 평균 정확도는 도체중 0.604 ~ 0.576, 등심단면적 0.6 ~ 0.573, 등지방두께 0.599 ~ 0.572, 근내지방도 0.607 ~ 0.578로 평균 0.009씩 감소하는 것을 확인하였다. 이를 통해 가계 내 유전체정보량이 개체 별 유전체정보 유무와는 상관없이 GEBV의 정확도 추정에 큰 영향이 없었으며, 신뢰도가 높은 GEBV 추정을 위해서는 개체 별 유전체정보의 유무가 더 큰 영향을 미친다는 것을 확인하였다.

본 논문의 목적은 건축물을 드론으로 계측하여 드론의 비행 및 촬영 변수에 따른 계측 정확도를 분석하는 것이다. 드론의 비 행 및 촬영 변수는 비행고도 3가지(50m, 60m, 70m), 중복도 4가지(60%/60%, 60%/80%, 80%/60%, 80%/80%), 카메라 각도 2가지(45°, 90°), 속도 2가지(2m/s, 최고속도)이며, 총 48번을 계측하였다. 드론으로 계측하여 얻은 3D 데이터와 실제 건축물의 길이를 비교하였으 며, 드론의 비행 속도가 느릴수록 정확도가 높게 나타났다.

본 연구는 스마트건설 지원을 위한 드론 활용의 활성화를 위해 RTK 드론 기반의 항공측량 정밀도를 분석하고자 GPS만을 사용하는 방식, GCP를 설치하는 방식, RTK 드론을 이용한 방식의 정사영상의 위치정확도를 분석하였고 사업의 목적과 대상지의 형태에 따른 드론 활용의 기준을 제시하였다. 또한 상용 드론을 이용한 체적기반의 토공량 산출을 2.5D 환경에서 산출하여 기존 방법과 비교해서 드론영상을 효율적으로 활용할 수 있는 방법을 제시하였다. 본 연구로 대규모 건설현장의 작업효율 및 드론 활성화가 기대된다.

본 연구에서는 UAV를 활용한 사진측량에서 지상 기준점 배치에 따른 정확도 분석을 수행하였다. 연구대상지역에 17개의 지상 기준점과 13개의 검사점을 설치하고 5가지 유형의 배치 형태를 만들었으며 검사점을 이용한 항공삼각측량의 성과분석과 산출물인 정사영상의 정량적, 정성적 분석 및 DSM을 이용한 공간분석을 수행하였다. 분석 결과 지상기준점 배치 시에는 삼각망 형태의 평면상의 배치형태도 중요하지만, 지형의 기복에 따른 지점의 높이 값을 고려하여 배치해야함을 확인하였다. 즉, 측량 대상 지역의 전체적인 평면상의 배치와 함께, 높이 값을 고려하여 지상기준점을 배치해야 더 높은 정확도를 확보할 수 있다.

The study evaluated the accuracy and intra-rater reliability for OWAS (Ovako Working posture Analysing System), RULA (Rapid Upper Limb Assessment), REBA (Rapid Entire Body Assessment) to improve their evaluation accuracy and reliability. Participants (n = 163) with undergraduate degree were recruited in this study and trained for 6 hours about the ergonomic assessment methods. Ergonomic assessments were conducted using OWAS, RULA, and REBA for a representative work with dynamic posture found in manufacturing industries. The study compared action categories (overall level) and detailed evaluation scores for individual body part. Action categories of the participants significantly differed from the golden reference defined by ergonomic experts. The participants underrated or omitted scores for truck (37.4% of the participants) and legs (52.8%) in OWAS. Similarly, the participants underrated or omitted additional scores for all body parts except the hand and wrist in RULA (53.5%) and REBA (54.8%). On the other hand, the participants overrated scores for the hand and wrist in RULA (55.2%) and REBA (39.9%). The results found in this study can help of selecting focus points and parts during assessment and education to improve accuracy and reliability of the ergonomic assessment methods.

This study examined how key factors of FFI (degree of explicitness, L1 similarity, proficiency level, and grammar type) influence the accuracy of production. A total of 22 experimental studies, all of which had Korean participants and productive assessments of speech or writing, were selected for analysis. Results revealed that explicit grammar emphasis was more effective for morphology that had a small, binary scope (present or absent). Results further revealed that explicit emphasis of grammatical features dissimilar from the L1 significantly increased accuracy of learner speech and writing. In contrast, implicit emphasis was effective with grammatical features that had a larger scope (e.g., many lexical forms or syntactic arrangements), as well as with grammatical features that were similar to the L1. Findings suggest that explicit emphasis of a smaller scope and implicit emphasis of a larger scope are both useful, since they do not cognitively overload the learner during communication.

Crack in concrete surfaces is one of the earliest signs of decomposition of the essential structure and constant exposure will cause serious damage to the structure and environment. In most of the safety assessment and fracture mechanic applications proposed that these cracks and defects eventually will grow and will have potential lead to in-service failure. Crack in concrete surfaces is one of the earliest signs of decomposition of the essential structure and constant exposure will cause serious damage to the structure and environment. Currently, non-destructive methods are getting popular in the field of inspecting defects in structure and one of them in trends is that using the thermographic image to detect hidden effects. However, the accuracy of the thermal camera, also called resolution, is highly dependent on camera variables such as lens, detector, sensitivity etc. Also, the most important question that needs to be answered for this research is what happens to the image in fog, rain or other climatic conditions where the camera detects crack which exceptionally smaller than most thermographic applications detects. This paper investigates the accuracy of thermal images obtained by the thermal camera under various weather condition and aims at providing information about optimum choice of environmental condition where the more favorable thermal images can be obtained and increase survey reliability and accuracy of the analysis.

목 적 : 침습성 눈물막파괴시간(TBUT, invasive tear break-up time)과 비침습성 눈물막파괴시간 (NIBUT, noninvasive tear break-up time) 검사법의 정확도를 비교하고자 하였다. 방 법 : 안질환이 없으며 굴절교정수술을 받지 않은 20대 대학생 56명(112안)을 대상으로 TBUT는 Fluorescein strip을 사용하여 측정하였고, NIBUT는 Keratograph 5M(K5M), Wavefront Analyzer (KR-1W), Auto refractor keratometer(KR-8100P)을 사용하여 측정하였다. 건성안 감별(screening) 기준 은 OSDI(ocular surface disease index) 설문지를 사용하였다. 각 측정값의 일치도 분석은 Bland & Altman Plot을 사용하여 확인하였고, 검사값의 정확도는 ROC(receiver operating characteristic) curve를 이용하여 민감도(sensitivity) 및 특이도(specificity), AUC(area under the curve), cut-off 값을 비교하여 분석하였다. 결 과 : TBUT는 NIBUT보다 유의하게 짧았고(p<0.05), KR-1W, KR-8100P, K5M으로 측정한 NIBUT 값들은 서로 유의한 차이가 없었다(F=2.69, p=0.06). NIBUT 검사값은 서로 중등도의 상관성을 보였지만 (r=0.36,0.44,0.35), TBUT는 K5M로 측정한 NIBUT와 상관성이 있었다. 검사법 상호간의 일치도 분석에서 TBUT와 NIBUT는 차이가 있었고, NIBUT 값들은 상호간 차이가 없었다. 건성안 유무 감별에 대한 민감도와 특이도는 각각 TBUT 검사법에서 25%, 80%, KR-1W 검사법에서 50%, 69%, KR-8100P 검사법에서 86%, 34%, K5M 검사법에서 31%, 82%로, 민감도는 KR-8100P 검사법이 가장 높았고, 특이도는 K5M 검사법이 가장 높았다. 결 론 : NIBUT 검사법은 TBUT 검사법보다 정확도가 높고, 검사법 상호간의 일치도가 우수하며, 건성안 감별에 KR-8100P 측정값이 유용하게 사용될 수 있을 것으로 사료된다.

Incremental sheet forming (ISF) is a highly versatile and flexible process for rapid manufacturing of complex sheet metal parts. Compared to conventional sheet forming processes, ISF is of a clear advantage in manufacturing small batch or customized parts. ISF needs die-less machine alone, while conventional sheet forming requires highly expensive facilities like dies, molds, and presses. This equipment takes long time to get preparation for manufacturing. However, ISF does not need the full facilities nor much cost and time. Because of the facts, ISF is continuously being used for small batch or prototyping manufacturing in current industries.However, spring-back induced in the process of incremental forming becomes a critical drawback on precision manufacturing. Since sheet metal, being a raw material for ISF, has property to resilience, spring-back would come in the case.It is the research objective to investigate how geometrical shaping parameters make effect on shape dimensional errors. In order to analyze the spring-back occurred in the process, this study experimented on Al 1015 material in the ISF. The statistical tool employed experimental design with factors. The table of orthogonal arrays of L8 (27) are used to design the experiments and ANOVA method are employed to statistically analyze the collected data. The results of the analysis from this study shows that the type of shape and the slope of bottom are the significant, whereas the shape size, the shape height, and the side angle are not significant factors on dimensional errors. More error incurred on the pyramid than on the circular type in the experiments. The sloped bottom showed higher errors than the flat one.

PURPOSES : The purpose of this study is to develop a method for improving the accuracy of analysis results obtained from a twodimensional (2-D) numerical analysis model of continuously reinforced concrete pavement (CRCP). METHODS: The analysis results from the 2-D numerical model of CRCP are compared with those from more rigorous three-dimensional (3- D) models of CRCP, and the relationships between the results are recognized. In addition, the numerical analysis results are compared with the results obtained from field experiments. By performing these comparisons, the calibration factors used for the 2-D CRCP model are determined. RESULTS : The results from the comparisons between 2-D and 3-D CRCP analyses show that with the 2-D CRCP model, concrete stresses can be overestimated significantly, and crack widths can either be underestimated or overestimated by a slight margin depending on the assumption of plane stress or plane strain. The behaviors of crack width in field measurements are comparable to those obtained from the numerical model of CRCP. CONCLUSIONS: The accuracy of analysis results from the 2-D CRCP model can be improved significantly by applying calibration factors obtained from comparisons with 3-D analyses and field experiments.

The GPS positioning method is widely used in the performance of forest tasks due to its convenient observation. But the result of GPS positioning without precise GPS measurements or DGPS method generally includes relatively large positioning errors. In case of mountainous regions, these positioning errors more increase because tree canopies or topographies interfere GPS satellite signals. Thus, observers have to consider how large positioning errors are included under the various observation condition in mountainous regions. In this study, we conducted a real-time GPS positioning experiment in the mountainous region with widely used three hand-held GPS measurements and a precise GPS measurement in Korea Forest Service. We observed the positioning data at various regions of topography and physiognomy. Finally, we analyzed the RMSE of each GPS positioning results under various mountain environments.

PURPOSES : The travel times of expressway buses have been estimated using the travel time data between entrance tollgates and exit tollgates, which are produced by the Toll Collections System (TCS). However, the travel time data from TCS has a few critical problems. For example, the travel time data include the travel times of trucks as well as those of buses. Therefore, the travel time estimation of expressway buses using TCS data may be implicitly and explicitly incorrect. The goal of this study is to improve the accuracy of the expressway bus travel time estimation using DSRC-based travel time by identifying the appropriate analysis period of input data. METHODS : All expressway buses are equipped with the Hi-Pass transponders so that the travel times of only expressway buses can be extracted now using DSRC. Thus, this study analyzed the operational characteristics as well as travel time patterns of the expressway buses operating between Seoul and Dajeon. And then, this study determined the most appropriate analysis period of input data for the expressway bus travel time estimation model in order to improve the accuracy of the model. RESULTS: As a result of feasibility analysis according to the analysis period, overall MAPE values were found to be similar. However, the MAPE values of the cases using similar volume patterns outperformed other cases. CONCLUSIONS: The best input period was that of the case which uses the travel time pattern of the days whose total expressway traffic volumes are similar to that of one day before the day during which the travel times of expressway buses must be estimated.

본 논문에서는 새로운 비중첩 영역 분할 기법을 바탕으로 한 병렬해석의 정확도 분석이 수행된다. Tak 등(2013)에 의해 제안된 이 방법에서 분할된 하위도메인들은 서로 중첩되지 않으며 계면요소(interfacial element)라 불리는 가상연결유한요소를 통해 서로 간의 관계가 결정된다. 이 접근법의 주요 장점은 영역 분할시 floating 도메인에서 발생할 수 있는 특이강성행렬(singular stiffness matrix)을 계면요소의 결합을 이용하여 가역행렬(invertible matrix)로 변환할 수 있다는 것과 기존의 FETI법에 비하여 해석시간과 스토리지(storage) 사용을 줄일 수 있다는 것이다. 반면에 3개 이상의 하위도메인들이 한 점에서 연결되는 경우를 의미하는 cross point에서는 해석의 정확도가 저하되는 경향이 나타났다. 따라서 본 논문에서는 새로운 비중첩 영역 분할기법에 대해 다양한 영역분할의 경우에 따라 발생하는 하나의 cross point에 접촉하는 하위도메인의 개수에 따른 정확도 분석이 수행되고 정확도가 저하되는 원인분석 및 대책이 논의된다.

The objective of this study was to compare the accuracy analysis and the effect of field application of a newly developed automatic heat detector in dairy cows. From 2009 to 2010, we used 48 Holstein cows (mounting cows : 38 heads, standing cows : 10 heads) raised in experimental barn of National Livestock Research Institute (RDA) for the accuracy analysis of automatic heat detector, and 14 Holstein cows raised in three commercial dairy farms of Cheonan and Pochun area for comparison of the effect of field application. The accuracy of response in cows attached with automatic heat detector was 86.8% (33/38) displayed on board when mounting activity observed, and 100% (10/10) when standing activity observed, and on average, 90.0% (43/48) displayed on board. The accuracy of automatic heat detector in on-farm test was 85.7% (12/14), and conception rate was 75.0% (9/12).