This study developed a flame-retardant fiber-reinforced composite material that satisfies the required regulations of railway vehicle interior parts for the purpose of reducing weight and simplifying the production process using SMC(sheet molding compounds) composite materials. It is essential to secure flame-retardant performance that minimizes flames and smoke for the safe evacuation of passengers in case of fire for interior parts of railway vehicles. In this study, the resin for SMC was developed by adding various flame retardant materials such as vinyl ester (halogen-based and phosphorus-based) and antimony trioxide, and chopped glass fibers were used as the reinforcing material. As a result of preparing specimens for phosphorus-based and halogen-based SMC materials, and comparing the flame retardant performance, the phosphorus-based SMC material had an oxygen index of 36.1, smoke density (1minute 30 seconds, 4minutes, 10minutes) of 1.7, 51.5, 195.1. It was measured with a toxicity index of 0.05 R and average heat for sustained burning of 4.5MJ/m, which satisfies all the flame retardant standards required for interior parts of railway vehicles, and it was found that most of the performance was better than that of halogen-based SMC.

Dual porous structures are observed for the first time on a metallic Cu surface underneath anodic Cu oxide by the application of an anodizing voltage to Cu in oxalic acid. The as-prepared porous Cu surface contains macropores of less than 1 μm diameter and mesopores of about tens of nanometers diameter with circular shapes. The size and density (number of pores/area) of the macropores are dependent on the applied voltage. It is likely that the localized dissolution (corrosion) of Cu in oxalic acid under the anodizing voltages is responsible for the formation of the mesopores, and the combination of a number of the mesopores might create the macropores, especially under a relatively high anodizing voltages or a prolonged anodizing time. The variations of pore structure (especailly macropores) with applied voltage and time are reasonably explained on the basis of the proposed mechanism of pore formation.

Fall is one of the most intimidating health conditions in elders. Comprehensive assessment is necessary to understand the individual and environmental aspects of the falls such as balancing abilities, depression, and quality of life. The purpose of this study was to compare the balancing ability, depression, and quality of life between elderly fallers and elderly non-fallers. Thirty-two community-dwelling elders (fifteen males and seventeen females between 65 and 83 years old), who have experienced fall on walking during last twelve months, were involved in the elderly fallers group. And twenty-four males and twenty-two females between 65 and 83 years old of community-dwelling elders, who have no experienced fall on walking during last twelve months, were involved in the elderly non-fallers group. Berg balance scale (BBS), timed up and go test (TUG), and functional reach test (FRT), were used to evaluate the ability of the physical balance. ‘Beck depression scale in Korean’ questionnaire was used to assess the depression. ‘Korean version of World Health Organization Quality of Life Assessment Instrument-Bref’ questionnaire was used to assess the quality of life. The results were as follows: 1) Balancing abilities measured by the BBS, TUG in the elderly fallers group were meaningfully lower than that of the elderly non-fallers group (p<.05), whereas no significant difference in the FRT was found (p>.05). 2) Depression level in the elderly fallers group was significantly higher than that of the elderly non-fallers group (p<.05). 3) Quality of life in the elderly fallers group was significantly lower than that of the elderly non-fallers group, excluding environment domain (p<.05). Therefore, in order for clinical evaluation of the community-dwelling elders those with reduced balancing ability, it is necessary to evaluate and understand the fall experience, depression, and quality of life.

The aim of this study was to investigate the effect of hip external rotation angle on pelvis and lower limb muscle activity during prone hip extension. Sixteen healthy men were recruited for this study. Each subject performed an abdominal drawing-in maneuver (ADIM) in a prone position, and extended the dominant hip at three different hip external rotation angles (0°, 20°, 40°) with a 30° hip joint abduction. Activity of the gluteus maximus (G Max), gluteus medius (G Med), and hamstring (HAM) and the G Max/HAM and G Med/HAM ratios were determined with surface electromyography (EMG). The EMG signal was normalized to 100% maximum voluntary isometric contractions (MVICs) and expressed as %MVIC. Data were analyzed by one-way repeated analysis of variance (alpha level=.05) and the Bonferroni post hoc test. Significant differences in G Max and G Med muscle activity were noted among the three different hip external rotation angles. G Max muscle activity increased significantly at both 40° (p=.006) and 20° (p=.010) compared to a 0° hip external rotation angle. G Med muscle activity increased significantly at 20° (p=.013) compared to a 40° hip external rotation angle. The G Max/HAM activity ratio increased significantly at both 40° (p=.004) and 20° (p=.014) compared to a 0° hip external rotation angle. The G Med/HAM activity ratio increased significantly at 20° (p=.013) compared to a 40° hip external rotation angle. In conclusion, 40° and 20° hip external rotation angles are recommended to increase G Max activity, and 20° hip external rotation is advocated to enhance G Med muscle activity during prone hip extension with ADIM and 30° hip abduction in healthy subjects.

Cobalt nano-rods were fabricated using a template-free electrochemical-deposition process. The structure of cobalt electro-deposits strongly depends on the electrolyte composition and on the density of the applied current. In particular, as the content of boric acid increased in the electrolyte, deposits of semi-spherical nuclei formed, and then grew into one-dimensional nano-rods. From analysis of the electro-deposits created under the conditions of continuous and pulsed current, it is suggested that the distribution of the active species around the electrode/electrolyte interface, and their transport, might be an important factor affecting the shape of the deposits. When transport of the active species was suppressed by lowering the deposition temperature, more of the well-defined nano-rod structures were obtained. The optimal conditions for the preparation of well-defined nano-rods were determined by observing the morphologies resulting from different deposition conditions. The maximum height of the cobalt nano-rods created in this work was 1μm and it had a diameter of 200 nm. Structural analysis proved that the nano-rods have preferred orientations of (111).

Tungsten oxide films were prepared by an electrochemical deposition method for use as the anode in rechargeable lithium batteries. Continuous potentiostatic deposition of the film led to numerous cracks of the deposits while pulsed deposition significantly suppressed crack generation and film delamination. In particular, a crack-free dense tungsten oxide film with a thickness of ca. 210 nm was successfully created by pulsed deposition. The thickness of tungsten oxide was linearly proportional to deposition time. Compositional and structural analyses revealed that the as-prepared deposit was amorphous tungsten oxide and the heat treatment transformed it into crystalline triclinic tungsten oxide. Both the as-prepared and heat-treated samples reacted reversibly with lithium as the anode for rechargeable lithium batteries. Typical peaks for the conversion processes of tungsten oxides were observed in cyclic voltammograms, and the reversibility of the heat-treated sample exceeded that of the as-prepared one. Consistently, the cycling stability of the heat-treated sample proved to be much better than that of the as-prepared one in a galvanostatic charge/discharge experiment. These results demonstrate the feasibility of using electrolytic tungsten oxide films as the anode in rechargeable lithium batteries. However, further works are still needed to make a dense film with higher thickness and improved cycling stability for its practical use.

The purpose of this study was to compare the ring lock type knee-ankle-foot orthosis (KAFO) with newly developed 4-bar linkage KAFO on the gait characteristics of persons with poliomyelitis clinically. This 4-bar linkage is the stance control type KAFO which provide the stability during stance phase and knee flexion during swing phase. Two subjects participated in this study voluntarily. We provided the customized 4-bar linkage KAFO then asked the subjects to walk in level surface and stairs under the two different KAFO conditions. The characteristics of gait in the persons with poliomyelitis were evaluated using a 3D motion analysis system and force plate. Additionally 6 minute walk test for physiological cost index were conducted using pulse oximeter to measure the energy consumption. In the results of this study, the differences of 4-bar linkage KAFO compared with ring lock type KAFO are as follows: (1) Walking speed, stride length, and step length on level increased in subjects, (2) The gait symmetry was improved by generated knee flexion and decreased pelvic external rotation on level and stairs walking, (3) Decreased vertical excursion of center of mass and pelvic elevation during swing phase was decreased on level, (4) Knee extension moment, hip flexion moment, hip and knee internal rotation moment of non-braced limb were decreased on level walking, (5) Walking speed in 6-minute walk test was increased and physiological cost index was decreased. These findings indicate that 4-bar linkage KAFO compared with ring lock type KAFO is effective in enhancing pattern, endurance, and energy consumption in level surface and stairs walking.

The lumbar multifidus muscle, which can be separated into deep fascicles (DM) and superficial fascicles (SM), is important for lumbar segmental stability. However, no previous studies have investigated the effect of lumbar stabilization exercises on the thickness of DM and SM. Thus, the purpose of this study was to assess DM thickness after three different lumbar segmental stabilization exercises. In total, 30 healthy male participants were recruited and randomly assigned to one of three exercise groups: hollowing in the quadruped position (H-Quad), contralateral arm and leg lift (CALL), and bilateral arm and leg lift (BALL). Each lumbar segmental stabilization exercise was conducted over 4 weeks. Ultrasonography was used to compare the DM and SM thickness before and after the 4 weeks of exercise. A mixed-model analysis of variance using Scheffe's post-hoc test was used for statistical analysis. The results showed a significant effect for the measurement time (before vs. after 4 weeks of exercise) in the DM (F=31.26, p<.05) and SM (F=4.56, p<.05). At the end of the 4 weeks, the DM thickness had increased significantly in the H-Quad exercise group, and the SM thickness had increased significantly in the CALL and BALL exercise groups. Also in the BALL exercise group, the SM thickness was greater compared with that in the H-Quad exercise group. These findings suggest that the thickness of the DM and SM were increased by different types of lumbar segmental stability exercise after 4 weeks.

The purpose of this study was to investigate the effect of the two different types of chairs on trapezius muscle activation during dictation tasks. Seventeen university students, each of whom were within standard deviation of the mean Korean standard body size, voluntarily participated in this study. Surface electromyography was used to collect electrical signals from both the upper and lower trapezius muscles. Amplitude Probability Distribution Function (APDF) was performed to analyze the muscle activity. The findings of this study were 1) The backrest-point height of the auditorium chair and the height, length and width of the connected desk were shorter than what was suggested by the KS. Another difference was that the auditorium chair had a bigger angle of the backrest compared to the classroom chair. 2) Regarding within-subject effect the sole statistically significant difference was found between activation of the upper trapezius muscle. The upper trapezius muscle's %RVC in the APDF 10th-50th-90th percentile was statistically higher for participants sitting in the auditorium chair than for participants sitting in the classroom chair (p<.05). 3) There was an interaction effect between the 'two chair-types' and the 'two muscle-sides' in the APDF 10th-50th percentile (p<.05). 4) There was an interaction effect between the 'two chair-types' and the 'three gaze-direction' in the APDF 90th percentile (p<.05). The findings of this study indicated that maintaining a writing posture for a prolonged period of time in an auditorium chair significantly increased the left upper trapezius muscle activation compared to a classroom chair.

Silicon-based thin film was prepared at room temperature by an electrochemical deposition method and a feasibility study was conducted for its use as an anode material in a rechargeable lithium battery. The growth of the electrodeposits was mainly concentrated on the surface defects of the Cu substrate while that growth was trivial on the defect-free surface region. Intentional formation of random defects on the substrate by chemical etching led to uniform formation of deposits throughout the surface. The morphology of the electrodeposits reflected first the roughened surface of the substrate, but it became flattened as the deposition time increased, due primarily to the concentration of reduction current on the convex region of the deposits. The electrodeposits proved to be amorphous and to contain chlorine and carbon, together with silicon, indicating that the electrolyte is captured in the deposits during the fabrication process. The silicon in the deposits readily reacted with lithium, but thick deposits resulted in significant reaction overvoltage. The charge efficiency of oxidation (lithiation) to reduction (delithiation) was higher in the relatively thick deposit. This abnormal behavior needs to clarified in view of the thickness dependence of the internal residual stress and the relaxation tendency of the reaction-induced stress due to the porous structure of the deposits and the deposit components other than silicon.

Thin film electrode consisting purely of porous anodic tin oxide with well-defined nano-channeled structure was fabricated for the first time and its electrochemical properties were investigated for application to an anode in a rechargeable lithium battery. To prepare the thin film electrode, first, a bi-layer of porous anodic tin oxides with well-defined nano-channels and discrete nano-channels with lots of lateral micro-cracks was prepared by pulsed and continuous anodization processes, respectively. Subsequent to the Cu coating on the layer, well-defined nano-channeled tin oxide was mechanically separated from the specimen, leading to an electrode comprised of porous tin oxide and a Cu current collector. The porous tin oxide nearly maintained its initial nano-structured character in spite of there being a series of fabrication steps. The resulting tin oxide film electrode reacted reversibly with lithium as an anode in a rechargeable lithium battery. Moreover, the tin oxide showed far more enhanced cycling stability than that of powders obtained from anodic tin oxides, strongly indicating that this thin film electrode is mechanically more stable against cycling-induced internal stress. In spite of the enhanced cycling stability, however, the reduction in the initial irreversible capacity and additional improvement of cycling stability are still needed to allow for practical use.

Abdominal muscle plays a crucial role in postural control and respiration control. However, thickness of abdominal muscle in the paretic side of a hemiplegic patient has not been reported in previous studies. The purpose of this research was to compare lateral abdominal muscle thickness between the nonparetic and paretic side in patients with chronic stroke using rehabilitative ultrasound imaging. Twenty two patients with chronic stroke participated in this study. Absolute thickness of transversus abdominis (TrA), internal oblique (IO) and external oblique (EO) was measured at the end of inspiration and expiration during quiet breathing, and relative thickness was calculated (thickness of each muscle as a percentage of total muscle thickness). Ultrasound imaging was recorded three times and the average value was determined for statistical analysis. Differences in absolute and relative lateral abdominal muscle thickness between the nonparetic and paretic side were assessed with paired t-tests. Absolute muscle thickness of the paretic side TrA was thinner than that of the nonparetic side at the end of inspiration and expiration during quiet breathing. Relative muscle thickness of the paretic side TrA was thinner than the paretic side only at the end of expiration during quiet breathing (p>.05). Therefore, it is necessary to strength TrA in patients with chronic stroke during physical therapy intervention. Further study is needed whether physical therapy intervension will induce TrA thickness in patients with chronic stroke in prospective study design.

The purpose of this study was to compare the anaerobic threshold (AT) between subjects with and without non-specific chronic low back pain (NCLBP). The patient group included 15 women with NCLBP. The normal group included 15 women without NCLBP who were age-, height-, weight-, and activity level-matched. The subjects performed a Balke treadmill protocol which was symptom-limited progressive loading test. Their heart rate (HR), ventilatory gas and metabolic equivalents (METs) were measured using the automatic breath gas analyzing system. After the test, each subjects' ratings of perceived exertion (RPE) were evaluated. The visual analog scale (VAS) was assessed pre- and post-test. The independent t-test and Wilcoxon's signed-rank test were used for analysis of the data. Time, HR, the volume of oxygen consumption (), relative , and METs at the AT level of the patient group were significantly lower than those of the healthy group (p<.05). However, there were no significant differences in RPE, VAS, and breathing frequency at the AT level (p>.05). The findings of this study indicate that patients with NCLBP had a lower aerobic fitness than healthy subjects. Thus, implementation of rehabilitation program to increase aerobic fitness may be considered in patietns with NCLBP, and further studies are required to determine the etiological factors of decreased aerobic fitness.

The purpose of this study was to identify the effects of manual facilitation and a stick on lumbar and hip joint flexion angles in subject with lumbar flexion syndrome during forward bending from a sitting position. Fifteen subjects with lumbar flexion syndrome were recruited for this study. As a pretest, all subjects performed three repetitions of bending the trunk forward until the tips of their fingers touched the target bar. After this pretest, the subjects practiced the forward bending of the trunk 10 times, using either manual facilitation or a stick. Then, as a posttest, all subjects repeated the pretest procedure. The flexion angles of lumbar spine and hip joint during forward bending in a sitting position were measured using a three-dimensional motion analysis system. A paired t-test was used to determine the statistical differences between pre-test and post-test flexion angles and pre- and post-test flexion angle differences between forward bending with manual facilitation and forward bending with a stick. The level of statistical significance was set at p=.05. The results of the study showed that the angle of the lumbar flexion decreased significantly and the bilateral hip flexion angle increased significantly when performing forward bending with stick and manual facilitation. Furthermore, the angle of lumbar flexion decreased significantly and the angle of bilateral hip flexion increased significantly in forward bending with a stick compared to forward bending with manual facilitation. The findings of this study indicate that both forward bending with manual facilitation and sticks could be used to prevent excessive lumbar flexion and increase hip flexion, and that forward bending with a stick is more effective than forward bending with manual facilitation for inducing lumbar spine and hip joint angle changes.

Push-up plus has been advocated for increasing the activity of the serratus anterior muscle, the most critical scapular stabilizer. However, no previous study has reported the possibility of compensatory motion on the part of the pectoralis major, which could substitute for the action of the serratus anterior during push-up plus. The aim of the current study was to investigate the immediate effect of electromyography (EMG) biofeedback of the pectoralis major muscle on the pectoralis major, upper trapezius, and serratus anterior muscles during push-up plus. Fourteen healthy young subjects voluntarily participated in this study; each subject performed push-up plus from the quadruped position, in two conditions (i.e., with or without visual and auditory biofeedback). Surface EMG was used to measure pectoralis major, serratus anterior, and upper trapezius activity. A paired t-test was used to determine any statistically significant difference between the two conditions. Additionally, effect size was calculated to quantify the magnitude of EMG biofeedback in each muscle. Visual and auditory feedback reduced pectoralis major muscle activity significantly (p=.000) and increased the serratus anterior muscle activity significantly (p=.002), but did not induce a significant difference in upper trapezius muscle activity (p=.881). Thus, it is concluded that the visual and auditory feedback of pectoralis major muscle activity can be used to facilitate serratus anterior muscle activity during push-up plus.

A nano-porous structure of tin oxide was prepared using an anodic oxidation process and the sample's electrochemical properties were evaluated for application as an anode in a rechargeable lithium battery. Microscopic images of the as-anodized sample indicated that it has a nano-porous structure with an average pore size of several tens of nanometers and a pore wall size of about 10 nanometers; the structural/compositional analyses proved that it is amorphous stannous oxide (SnO). The powder form of the as-anodized specimen was satisfactorily lithiated and delithiated as the anode in a lithium battery. Furthermore, it showed high initial reversible capacity and superior rate performance when compared to previous fabrication attempts. Its excellent electrode performance is probably due to the effective alleviation of strain arising from a cycling-induced large volume change and the short diffusion length of lithium through the nano-structured sample. To further enhance the rate performance, the attempt was made to create porous tin oxide film on copper substrate by anodizing the electrodeposited tin. Nevertheless, the full anodization of tin film on a copper substrate led to the mechanical disintegration of the anodic tin oxide, due most likely to the vigorous gas evolution and the surface oxidation of copper substrate. The adhesion of anodic tin oxide to the substrate, together with the initial reversibility and cycling stability, needs to be further improved for its application to high-power electrode materials in lithium batteries.

A porous nickel-tin nano-dendritic electrode, for use as the anode in a rechargeable lithium battery, has been prepared by using an electrochemical deposition process. The adjustment of the complexing agent content in the deposition bath enabled the nickel-tin alloys to have specific stoichiometries while the amount of acid, as a dynamic template for micro-porous structure, was limited to a certain amount to prevent its undesirable side reaction with the complexing agent. The ratios of nickel to tin in the electro-deposits were nearly identical to the ratios of nickel ion to tin ion in the deposition bath; the particle changed from spherical to dendritic shape according to the tin content in the deposits. The nickel to tin ratio and the dendritic structure were quite uniform throughout the thickness of the deposits. The resulting nickel-tin alloy was reversibly lithiated and delithiated as an anode in rechargeable lithium battery. Furthermore, the resulting anode showed much more stable cycling performance up to 50 cycles, as compared to that resulting from dense electro-deposit with the same atomic composition and from tin electrodeposit with a similar porous structure. From the results, it is expected that highly-porous nickel-tin alloys presented in this work could provide a promising option for the high performance anode materials for rechargeable lithium batteries.

The aim of this study was to investigate the effect of supporting surface instability to trunk and lower extremity muscle activities during bridging exercise combined with core-stabilization exercise. Thirty young healthy adults (15 males and 15 females) voluntarily participated in this study. Each subject was asked to perform bridging exercise combined with core-stabilization exercise on three different supporting surfaces (stable ground surface, the wooden balancing board, and the air cushion). The muscle activities were measured using surface electromyography (EMG) during performing exercise. To test statistical significance, one-way ANOVA with repeated measures was used with the significance level of .05. The findings of this study are summarized as follows. (1) There were significant differences in muscle activities on internal oblique, external oblique, gluteus medius, semitendinosus, biceps femoris, medial gastrocnemius and lateral gastrocnemius during exercise (p<.05). (2) The biceps femoris and lateral gastrocnemius showed significantly higher muscle activity on the wooden balancing board rather than on the ground, and semitendinosus, biceps femoris, medial gastrocnemius and lateral gastrocnemius showed significantly higher muscle activity on the air cushion rather than on the ground (p<.05). Therefore, it is concluded that muscle activities in the trunk and the lower limbs during bridging exercise combined with core-stabilization exercise was affected with instability of supporting surface. Further researches are needed to investigate the long term effect of bridging exercise on muscle activity with patient group.

It is important to find the effective position for cough and sputum clearance in respiratory physical therapy. The purpose of this study was to compare the changes in peak expiratory flow (PEF), forced expiratory volume in 1 second (FEV1), and peak cough flow (PCF) related to functional level and measurement position in patients with Duchenne muscular dystrophy. Twenty one subjects were classified into three functional levels, and measurements was undertaken in three different measurement positions (upright sitting, 45˚ reclining and supine). Vitalograph PEF/FEV DIARY was used to measure PEF and FEV1, and Ferraris Pocket Peak was used to measure PCF. Mixed two-way analysis of variance and Bonferroni post-hoc test were used for statistical analysis. The results of the study were as follows: 1) Significant main effects for measurement position were found. 2) PEF was the highest in upright sitting, followed by 45˚ reclining, and supine in order. 3)FEV1 in upright sitting and 45˚ reclining were significantly greater compared with that in supine. 4) PCF in upright sitting and 45˚ reclining were significantly greater compared with that in supine. 5) No significant main effects for functional level were found in PEF, FEV1, and PCF. 6) No significant functional level by measurement position interactions were found in PEF, FEV1, and PCF. Therefore, it is concluded that upright sitting and 45˚ degree reclining positions are recommended for effective cough and sputum clearance.