도로 포장 기술이 발달함에 따라 내구성 확보 등의 구조성능 중심에서 이용자의 승차감 및 소음 저감 등의 기능성 중심으로 변화하 고 있다. 최근 도로 소음에 대한 민원이 증가하고 있고 도로 소음으로 인한 피해를 보상하라는 판결 사례도 증가하고 있다. 이러한 문 제를 해결하기 위해 차량 소음 저감 효과가 우수한 저소음 포장을 적용하고 있다. 본 연구에서는 저소음 배수성 포장과 저소음 비배 수성 포장의 내구성 및 공용성을 평가하였으며, 기대수명 예측을 위해 국내에 있는 배수성 8종, 비배수성 3종의 제품을 이용하여 실내 성능 평가를 수행하였다. 국토교통부의 "아스팔트 콘크리트 포장 시공 지침(2021)"의 배수성 포장 품질기준 및 비배수성 혼합물에 대 한 품질기준에 따라 시험을 진행하였다. 아스팔트 혼합물의 생산, 저장, 운반 및 포설 시 아스팔트의 흘러내리는 양이 적합한지를 평 가하기 위해 드레인다운 시험을 진행하였고, 배수성 혼합물의 골재 비산 저항성을 평가하기 위해 칸타브로 손실률 시험을 진행하였다. 또한 포장의 수분 저항성을 평가하기 위해 인장강도비(TSR) 시험과 소성변형 저항성을 평가하기 위해 동적안정도 시험을 진행하였다. 이후, 배수성 포장의 투수 성능을 평가하기 위한 실내투수계수 시험을 진행하였고, 저소음 포장의 소음 저감 성능을 평가하기 위해 임 피던스 관을 이용한 흡음률 시험을 진행하였다. 시험 결과 모든 종류의 혼합물이 품질기준을 통과하여 충분한 기초 성능을 가지고 있 는 것으로 나타났고, 흡음률 시험의 경우 배수성 혼합물이 평균 0.779, 비배수성 혼합물이 평균 0.638의 흡음계수를 나타내었다. 배수 성 혼합물과 비배수성 혼합물의 평균 공극률은 각각 19.3%, 3.2%로 배수성 혼합물이 비배수성 혼합물에 비해 많은 공극률을 가지고 있어 소음 저감 성능이 비배수성에 비해 우수한 것으로 판단하였다.

Evaluation of low temperature performance of asphalt mixture is significant not only for mitigating transverse thermal cracking but also for preventing potential traffic accidents. In addition, the engineers in pavement agency need to inform the proper pavement section where urgent management is needed. Since early 2000, Korea Expressway Corporation Research Division (KECRD) developed an 3D Pavement condition Monitoring profiler vehicle (3DPM) to survey expressway pavement surface condition precisely. The management of whole expressway network became more precise, effective and efficient than before due to application of 3DPM and HPMS. One thing recommended is: performing extensive mechanical test and corresponding data analysis work procedure to further strengthen the feasibility of current 3DPM approach and HPMS. In this paper two activities were considered: first, the pavement section where the urgent care is recommended is selected by means of 3DPM approach. Then asphalt mixture cores were acquired on that specified section then low temperature fracture test: Semi Circular Bending (SCB) test, was performed. The mechanical parameters, energy release rate and fracture toughness were computed then compared. It is concluded that the current 3DPM approach in KEC can successfully evaluate and analyze selected pavement condition. However, more extensive experimental works are needed to further strengthen the current pavement analyzing approaches.

인공지능(Artificial Intelligence, AI)은 1950년대 초기개념과 이론을 앨런 튜링이 튜링 테스트를 제안하여 기계가 인간과 같은 수준의 지능을 가질 수 있는지 대한 질문을 던지면서 시작되었다. 1980년대부터 특정 분야의 전문 지식을 모방하여 지원하는 AI 시스템인 전 문가 시스템이 부상하기 시작하면서 Machine Learning이 중요성을 얻기 시작하였다. 특히, Decision Tree, Clustering 그리고 Neural Network Algorithm 등이 연구되기 시작하였다. Clustering 기법은 다양한 분야에서 통계분석에 사용되는 자료를 정제하기 위한 비지도 학습 중 하나로, 군집화 알고리즘을 사용하여 자료의 값(Pointer)들을 특정 그룹으로 분류하는 방법이다. 이러한 Clustering을 활용하여 기존 데이터에서 숨겨진 데이터들의 특성을 파악할 수 있으며, 일정 패턴이나 특징을 가진 데이터들끼리의 군집화를 할 수 있게 된다. 이러한 클러스터링은 다양한 산업 분야에서 적용 및 활용하고 있다. 산업화 이후 미국, 벨기에 등 많은 나라에서 효율적인 도로 관 리를 위해 자국의 특성에 맞는 Pavement Management System (PMS)를 운영하고 있지만 현재 많은 분야에서 적용하고 있는 AI를 활용한 사례가 매우 드물다. 한국에서도 수십년 동안 국토교통부와 한국도로공사에서 PMS를 이용하여 도로를 관리해 왔으며, 최근에 는 몇 개 지자체에서 PMS를 도입하였다. 하지만 한국에서는 오랜 PMS 운영 경험에도 불구하고 AI를 활용하지 않고 전통적 방법인 회귀모형을 활용하여 개발한 공용성 예측모형을 사용하고 있기 때문에 그 성능이 떨어지고 있다. 따라서 본 연구에서는 Machine Learning Clustering 기법을 PMS 자료에 적용이 가능한지 확인하였다. 공용성 예측모형의 종속변수인 Performance Factors와 독립변 수인 Influencing Factors 간의 상관성을 확인할 수 없는 경우 클러스터링을 적용하여 종속변수와 독립변수 간의 상관성을 분명히 나 타내고 회귀분석이 가능하도록 하였다. Delaunay Triangulation을 적용하여 인천광역시 기상관측소의 삼각망을 형성하였다. 삼각망의 각 꼭짓점과 도로 각 지점 간의 거리에 대하여 Inverse Distance Weighted 방법을 적용하여 도로 각 구간의 PMS 자료와 영향인자를 매칭하였다. 클러스터링 기법을 원자료에 적용한 결과 공용성인자와 영향인자 간의 상관성이 분명해졌다. 또한, 클러스터링 이전과 이 후 자료의 확률밀도함수의 분포를 비교하여 클러스터링 이후의 자료가 이전의 대해서 대표성을 갖고 있는지 확인하였다.

In order to prevent early distress in asphalt pavement and save on subsequent operational and maintenance costs, modifying asphalt is an effective approach. Styrene–butadiene–styrene (SBS) block copolymers, due to their excellent physicochemical properties, have become a mature and widely used asphalt modifier. Carbon nanotubes (CNTs) possess advantages such as a large specific surface area and high modulus, which, when incorporated into asphalt, can enhance its deformation resistance. To analyze the effect of incorporating CNTs on SBS-modified asphalt (SBS-A), this study analyzed the influence of different CNT concentrations on the high and low-temperature performance and aging properties of SBS-A through penetration, softening point, ductility, dynamic shear rheometry, and short-term aging tests. The optimal CNT concentration was determined to be 1.0%. Furthermore, the changes in the modified asphalt during the aging process were analyzed using infrared spectroscopy.

PURPOSES : The purpose of this study is to provide basic data to improve the service life of asphalt pavement using basalt aggregate in Jeju Island by evaluating the performance of asphalt pavement through analysis of material and structural aspects. METHODS : To evaluate the performance of Jeju Island's asphalt pavement, cracks, permanent deformation, and longitudinal roughness were analyzed for the Aejo-ro road, which has high traffic and frequent premature damage. Cores were collected from Aejo-ro sections in good condition and damaged condition, and the physical properties of each layer were compared and analyzed. In addition, plate cores were collected from two sections with severe damage and the cause of pavement damage was analyzed in detail. RESULTS : About 45% of the collected cores suffered damage such as layer separation and damage to the lower layer. The asphalt content of surface layer in the damaged section was found to be 1.1% lower on average than that in the good condition section, and the mix gradations generally satisfied the standards. The density difference between the cores of each layer was found to be quite large, and the air voids was found to be at a high level. CONCLUSIONS : Test results on the cores showed that, considering the high absorption ratio of basalt aggregate, the asphalt content was generally low, and the high air voids of the pavement was believed to have had a significant impact on damage. High air voids in asphalt pavement can be caused by poor mixture itself, poor construction management, or a combination of the two factors. Additionally, the separation of each layer is believed to be the cause of premature failure of asphalt pavement.

PURPOSES : The numeric-based Highway Pavement Management System (HPMS), along with an advanced three-dimensional pavement condition monitoring profiler vehicle (3DPM), in South Korea has presented remarkable advancements in pavement management since the early 2000. Based on these results, visual distress on pavement surfaces can be easily detected and analyzed. Additionally, the entire expressway pavement surface conditions in South Korea can be easily monitored using the current graphical user interface-based advanced information graphic (AIG) approach. Therefore, a critically negative pavement section can be detected and managed more easily and efficiently. However, the actual mechanical performance of the selected pavement layer still needs to be investigated in a more thorough manner not only to provide more accurate pavement performance results but also to verify the feasibility of the current 3DPM and AIG approaches. In this study, the low-temperature performance of the selected asphalt pavement layer section was evaluated to further verify and strengthen the feasibility of the current 3DPM and AIG approaches developed by the Korea Expressway Corporation. METHODS : Based on 3DPM and AIG approach, the positive and negative-riding-quality road sections were selected, respectively. The asphalt material cores were extracted from each section then bending beam rheometer mixture creep test was performed to measure their low-temperature properties. Based on the experimental results, thermal stress results were computed and visually compared. RESULTS : As expected, the asphalt material from the negative driving performance section presented a poorer low-temperature cracking resistance than that from the positive driving performance section. CONCLUSIONS : Current 3DPM equipment can successfully evaluate expressway surface conditions and the corresponding material performance quality. However, more extensive experimental studies are recommended to verify and strengthen the findings of this study

PURPOSES : This study evaluates the long-term performance of the asphalt overlay designed by the Seoul pavement design method which determines overlay thickness by considering existing pavement conditions, traffic volume, and bearing capacity of the pavement. METHODS : A total of 76 sections including 17 control sections and 59 design sections were constructed under various traffic conditions, overlay thicknesses and asphalt mixtures. The performance of the pavements has been monitored up to 60 months in terms of surface distresses, rutting, and longitudinal roughness. The service life of the pavements was estimated to be the period when the Seoul pavement condition index (SPI) becomes 6.0, i.e., a rehabilitation level. RESULTS : Overall, the service life of the pavements was 72 months in the control and 120 months for the design sections. For relatively thinner overlay sections than designed, the service life reduced significantly; 36 months for 15cm thick overlay and 120 months for 25cm thick overlay. The service life of the pavement in the bus-only lane was 78 months, which is 30 months shorter than that in mixed-traffic lanes. Out of the bus-only lanes, 56% of the pavement along bus stop was deteriorated early to be a poor condition while only 2% of the pavement in a driving lane was degraded to be poor. The overlay with Stone Mastic Asphalt (SMA) in the wearing surface had 38% longer life than that with conventional dense graded mixtures. CONCLUSIONS : Most of the overlays sections designed by the Seoul pavement design method were expected to survive 10 years, except for bus-only lanes. The control sections having 5 to 10 cm thick overlays showed significant lower performance than the design sections. Thus proper thickness and materials considering the characteristics of existing pavement and traffic volumes should be applied to secure the service life of overlays.

PURPOSES : The objective of this study is to address various problems, such as an increase in material cost and premature failure (e.g., cracks and potholes) of porous pavements, and to develop multifunctional asphalt and asphalt mixtures to ensure the long-term commonality of porous asphalt pavements. METHODS : A basic quality test of two types of porous asphalt mixtures was performed. One type consisted of the existing porous asphalt mixture, using domestically presented grading, and the other a porous asphalt mixture using high-viscosity modified asphalt with enhanced low-temperature properties, aimed at improving strain resistance and developed by applying the grading suggested by the Federal Highway Administration (FHWA). RESULTS : The cantabros loss rate was 19.62 % for conventional modified asphalt (PG 82-22) and 5.95 % for the developed highviscosity modified asphalt (PG 88-28), indicating that both mixtures passed the criteria. Regarding the drain-down loss rate, mixtures using both types of asphalt were found to pass all quality standards. The average permeability coefficients for each porous asphalt mixture were 0.023 and 0.018 and both types of porous asphalt mixtures satisfied the quality standard of 0.01 cm/s, as given by the Asphalt Concrete Pavement Guidelines of the Ministry of Land, Infrastructure, and Transport. CONCLUSIONS : As a result of the mix design of the two porous asphalt mixtures, the mixture developed in this study was found to be superior to the conventional porous asphalt mixture using conventional porous asphalt grading and modified asphalt.

PURPOSES : The purpose of this study is to evaluate the performance characteristics of stone mastic asphalt (SMA) pavement by comparison with polymer modified asphalt (PMA) pavement and conventional asphalt pavement, to check the performance characteristics according to the pavement type, pavement materials, traffic volume, and environmental factors and to analyze the quality variation characteristics according to the pavement materials using data extracted from the database of the expressway long-term pavement performance. METHODS : Approximately 10% outlier data of pavement performance data were excluded in order to increase the reliability of the analysis results before evaluating the asphalt pavement performance. The performance model was developed through linear regression analysis by setting the performance period as the independent variable and the highway pavement condition index (HPCI) as the dependent variable. Descriptive statistic analysis of HPCI using the static package for social science (SPSS) tool and the analysis of variance was performed to identify the quality variation characteristics according to the pavement materials. The amount of de-icing agent and traffic level of service were classified as two levels in order to check the influence of traffic volume and environmental factors on the performance characteristics of the asphalt pavement. RESULTS : The tentative pavement performance lives were calculated at 19.3 years for new the SMA pavement (GPS-2), 14.3 years for the SMA overlay on the asphalt pavement (GPS-6), and 10.3 years for the SMA overlay on the concrete pavement (GPS-7). In case of the asphalt overlay, the tentative performance lives were calculated at 8.2 years for the PMA overlay on the asphalt pavement (GPS-6), 7.2 years for the PMA overlay on the concrete pavement (GPS-7), 7.2 years for the conventional asphalt overlay on the asphalt pavement (GPS-6), and 5.5 years for the conventional asphalt overlay on the concrete pavement (GPS-7). CONCLUSIONS : It was confirmed that the SMA pavement showed better performance and quality variation characteristics than the PMA and conventional asphalt pavement. The performance characteristics of the asphalt pavement (GPS-2) was better than the asphalt overlay pavement, and the asphalt overlay on the asphalt pavement (GPS-6) had better performance characteristics than the asphalt overlay on the concrete pavement (GPS-7). It was observed that the asphalt overlay on the asphalt pavement (GPS-6) was strongly influenced by the traffic volume and the asphalt overlay on concrete pavement (GPS-7) was strongly influenced by the traffic volume and de-icing agent.

PURPOSES : The purpose of this study is to evaluate the performance of an ultra-thin asphalt pavement as a preventive maintenance approach through laboratory tests. METHODS : An ultra-thin asphalt pavement of 2 cm wearing course thickness comprising modified asphalt and aggregate is a preventive maintenance method used for asphalt pavements. A mix design was carried out to determine the optimum aggregate gradation and asphalt contents. A dynamic immersion test was performed to evaluate the water-resistance of the ultra-thin asphalt pavement. A wet track abrasion test and a cohesion test were conducted to examine the applicability of the ultra-thin asphalt pavement in surface treatment. The performance of the ultra-thin asphalt pavement was evaluated through wheel loading tests, such as Hamburg wheel-tracking and third-scale model mobileloading simulator (MMLS-3). RESULTS : An optimum binder content of 4.9% was obtained in the ultra-thin asphalt mixture from the Marshall mix design. The waterresistance tests indicated a 70% dynamic immersion coverage rate of the ultra-thin asphalt pavement. The wet track abrasion test showed an abrasion rate of 0.0107 g/cm2, and the cohesion tests indicated a 19.0 kg·cm average cohesion at 30 min of operating time and 21.4 kg·cm average cohesion at 60 min of operating time. From the Hamburg wheel-tracking test, a 16.56 mm rut depth at 20,000 wheel passing was obtained. Finally, a 5.87 mm rut depth at 300,000 number of wheel passing was detected from the MMLS-3 test. CONCLUSIONS : The water-resistance of the ultra-thin asphalt pavement satisfied the recommended guidelines of the Korean Ministry of Land, Infrastructure and Transport. In addition, the applicability of the ultra-thin asphalt pavement as a surface treatment met the standard of the International Slurry Surfacing Association. Furthermore, the deformation performance of the ultra-thin asphalt pavement was 1.5 times better than that of the straight asphalt pavement, based on the results of the wheel-loading tests. Hence, it is estimated that an ultra-thin asphalt pavement has a high performance in the preventive maintenance of asphalt pavement, even though the cracking resistance was not evaluated in this study.

PURPOSES: This study evaluated the effect of fog seal treatment utilizing an agricultural oil-based asphalt concrete sealant (ABCS) on the long-term performance of an asphalt pavement. METHODS: Fog seal treatment using ABCS was applied on 800 m of the pavement section in the test section with a total length of 2,400 m; the remaining pavement section was not considered for this treatment. A series of laboratory and field tests were conducted on both sections, including a Marshall stability test, penetration test, viscosity test, skid resistance test, and pavement surface macrotexture test. In addition, the pavement condition index (PCI) was determined 8 years after the ABCS application to evaluate the effect of the ABCS treatment on the pavement’s long-term performance. RESULTS : The ABCS-treated section exhibited a PCI of 75, whereas the non-treated section exhibited a value of 64. Furthermore, a MicroPAVERTM‚ pavement management system determined that the pavement deterioration rates (i.e., drops in PCI) were 3.6 and 5.1 per year for the ABCS-treated and non-treated sections, respectively. CONCLUSIONS : The results of the series of laboratory and field tests revealed that the ABCS treatment increased the pavement performance life by approximately 3.5 years.

PURPOSES: Using recyclable materials in asphalt pavement industry is one of the essential tasks not only for saving construction budgets but also for mitigating environmental pollutions. Over the past decades, several efforts have been made by road maintenance agencies to incorporate various recyclable materials into virgin asphalt paving mixtures. As a result, reclaimed asphalt pavement (RAP), which consists of old pavement material was selected as one of most widely used recyclable materials. In this paper, the effects of using different amounts of single-recycled RAP (SRRAP) and double-recycled RAP (DRRAP) on the low-temperature characteristics of asphalt mixtures were investigated. METHODS: To evaluate the low-temperature characteristics of SRRAP and DRRAP mixtures, two experiments, the bending beam mixture creep test and semicircular bending fracture test were performed. The experimental parameters: creep stiffness, m-value, thermal stress, critical cracking temperature, fracture energy, and fracture toughness were computed then compared. RESULTS : RAP mixtures (SRRAP or DRRAP) showed lower mechanical performance compared with conventional asphalt mixtures. The differences became distinct with increased RAP addition. However, the performance differences between SRRAP and DRRAP mixtures were not significant in all cases, which indicate the possible application of re-recycling technology (DRRAP) in the asphalt pavement industry. CONCLUSIONS : The addition of RAP to virgin asphalt can mitigate low-temperature performance despite the improvement in fracture performance observed in some cases. Therefore, using RAP (SRRAP or DRRAP) mixtures on inter or sublayer construction, but not on the surface layer, is recommended. Moreover, the possibility of applying double-recycling technology in asphalt pavement industry can be introduced in this study because not significant performance differences were found between SRRAP and DRRAP mixtures especially at low temperature.

PURPOSES: Using recycled asphalt materials (called Reclaimed Asphalt Pavement: RAP) from existing asphalt pavement layers in newly constructed asphalt pavement is an essential option not only for lowering the construction budget but also for mitigating environmental pollution for society. For this reason, many pavement agencies in South Korea, the USA, and Canada have observed the effect of RAP on conventional asphalt pavement to evaluate and set proper material specifications and addable amounts. In this paper, effect of recyclable material on low-temperature performance of asphalt materials was investigated with two different mechanical tests. Among the recyclable material sources, RAP and Taconite Aggregate (TA), which is mainly produced in northern Minnesota (USA), were considered. METHODS : To evaluate the low-temperature mechanical performance of a RAP mixture, two different experimental tests (In-Direct Tensile (IDT) low temperature creep test and Semi-Circular Bending (SCB) test) were considered. The mechanical parameters creep-stiffness, relaxation modulus, fracture energy, and fracture toughness were computed then compared. RESULTS: More brittle characteristics were observed with RAP-added asphalt mixtures compared to the conventional asphalt mixtures, as expected. However, the differences of computed mechanical performances were not significantly distinct for RAP mixtures compared to conventional mixtures when the RAP proportion was around 20%, and with the addition of TA up to 20%. CONCLUSIONS : It can be concluded that up to 20% of RAP addition (along with TA up to 20%) in a virgin asphalt mixture does not provide significant performance reduction. This addable proportion can be viewed as a successful minimum level when considering the addition of RAP to hot-mix asphalt (HMA). Moreover, applying TA with RAP could offer a successful alternative for asphalt recycling and the materials industry.