Cement production processes release various odor elements including acetaldehyde, hydrogen sulfide, formaldehyde and toluene etc. A three-dimensional numerical simulation using a commercial code of Computational Fluid Dynamics (CFD) was used to estimate the concentration profiles and dispersion distance around the local residential area. The calcination furnace, one of the main emission sources in the cement manufacturing process, discharged the odorous gases of H₂S, HCHO, CH₃CHO and C6H5CH₃at levels of up to 3.15 ppb, 5.1 ppm, 6.65 ppm and 0.74 ppm of H₂S, HCHO, CH₃CHO and C6H5CH₃respectively. This study found that as for the emission concentration of 1ppm for H₂S and CH₃CHO, the landing distance of the threshold value for each gas was extended in summer seasons at a low velocity. Low temperature of the flue gas at a high velocity also led to long dispersion.

이 연구의 목적은 강남 선정릉지역에서 전산유체역학모델(CFD)을 사용하여 도시지역의 흐름 및 열 환경 모의를 검증하는 것이고, CFD 모델의 모의결과와 선정릉 지역의 관측 자료와 비교하는 것이다. CFD 모델은 국립기상과학원과 서울대가 공동으로 연구 개발된 모델이다. CFD_NIMR_SNU 모델은 기상청 현업 모델인 국지예보모델(LDAPS)의 바람성분과 온도성분을 초기 및 경계조건으로 적용되었고 수목효과와 지표 온도를 고려하여 2015년 8월 4일에서 6일까지 강남 선정릉 지역을 대상으로 수치실험을 진행하였다. 선정릉지역에서 수목효과 적용 전후의 풍속을 비교하였을 때 평균 제곱근 오차(RMSE)는 각각 1.06, 0.62 m s−1로 나타났고 수목효과 적용으로 풍속 모의정확도가 향상되었다. 기온은 LDAPS 과소 모의하는 경향을 나타내고 CFD_NIMR_SNU 모델에 의해 향상된 것을 확인하였다. CFD_NIMR_SNU 모델을 이용하여 복잡한 도시지역의 흐름과 열 환경을 자세하고 정밀한 분석이 가능하며, 도시 환경 및 계획에 대한 정보를 제공 할 수 있을 것이다.

This study aims to observe the wind load characteristics around two-dimensional rotor blade of small wind turbine under high wind speed. The CFD analysis on the blade shape of NACA-4418 is performed to understand the wind load(i.e., drag and lift coefficient). In the results, the drag and lift coefficient were estimated to be 0.013, 0.44, respectively, at the wind speed 35m/s(wind speed at the height of wind tower, z=70m) and angle of attack 3°. By using the lift, drag coefficient and the appropriate assumption of the blade length, the number of blade and the tip speed ratio(TSR), the proper blade shape was obtained. On the base of this basic study, various conditions for Reynolds number and aerodynamic analysis including angle of attack according to parametric test need to study more in the future. Also assessment for the blade need to study safety on wind pressure coefficient and distribution according to wind characteristics.

This study identified effects of forest density and placed on the fluid flow in the canopy using a computational fluid dynamics model, ENVI_met model. In addition, change of the fluid flow for each point was observed by selecting the impact prediction point. As a result, the density of the forest gave a direct effect on the fluid flow in height below the tree height and inside crown. In case of height below the tree height, the strongest physical changes appeared in CASE1 of dense forest. On the other hand, in case of crown height, distinct fluid flow changes appeared in CASE 2 and 3. After calculating fluid change of the impact prediction point according to altitude, the more dense height below the tree height appear significant changes in the fluid. On the other hand, in case of crown, from the moment outside the interference of the tree, the result showed that the wind path formed distinctly in CASE 2 and 3.

클라우드 기술과 고성능 컴퓨터의 보급으로 최근 들어 CFD를 기반으로 에너 지 및 환경 분야 제품을 효율적으로 개발하려는 연구가 활발히 진행되고 있다. 분리막 분야에서도 모듈 및 전체 공정에 대한 공학적 접근법으로 CFD를 적용 하는 사례가 증가하고 있다. 본 연구에서는 평막형 분리막, 중공사형 가압식 모듈, 하수 공정을 대상으로 CFD를 적용한 사례 위주로 논하고자 한다.

Abalone (Haliotis discus hannai) is a shellfish that feeds on kelp and, as a product, it can often achieve a high market value. However, the dissolved oxygen (DO) levels in coastal waters in Korea have been negatively impacted by pollution from many anthropogenic sources. Herein, a computational fluid dynamics (CFD) software package was used to analyze the distribution of the DO concentration within an abalone containment structure. A finite volume approach was used to solve the Reynolds-averaged Navier–Stokes equations combined with a k–ε turbulence model to describe the flow. The distribution of DO was determined within the control volume domain, and the transport equations of the pollutants were interpreted using a CFD model. The CFD analysis revealed that more than 60% and 30% of the relative oxygen concentration in one and two containers, respectively, was maintained when the flow acts along the six sheets of polyethylene plates. Therefore, it is clear that the abalone plate shelters should be placed parallel to the flow.

세계적으로 급증하는 전력수요에대처하고, CO2 배출을 줄이고자 인구가 밀집되어 있는 도 심지에 복합화력 발전소가 건설되고 있다. 환경규제가 계속적으로 강화됨에 따라 NOx 배출량을 줄이고 자 저 NOx 버너, SCR 등 여러 가지 설비들을 설치하고 있다. 본 연구는 경기도 고양시 소재의 일산열병합발전소 1개소에서 배출되는 질소산화물을 TMS를 이용하 여 배출계수를 산정하여 이를 전산유체동역학(CFD)에 적용하여 질소산화물의 거동을 살펴보고, 현장 실 측 결과와 비교 검토하였다. 실측 기간 중 측정 시간에 따른 주 풍향․풍속의 순간적인 변화로 인해 실측 결과와 CFD 모델링 결과 의 차이가 나타날 수 있으나, 모델링 결과와 실측 결과는 대부분 예측지점에서 유사한 농도로 나타났다. 향후 주변농도를 고려한 기여농도를 산출하여 실측농도에 가까운 예측농도 도출이 가능 할 것으로 판단 된다.

In this study, the ventilation of duct is simulated by CFD and thermal changes on the seat surface are measured experimentally. These models are the improved duct and the existing one installed at the real seat in order to test the thermal change 1 minute later. The seat with the existing duct has the temperatures of 26℃ and 25℃ on lumber and femoral parts respectively. However, the seat with the improved duct has the temperature of 1℃ lower than the seat with the existing duct. This result contributes to develop the improved duct. Hereafter, the methods used in this study are expected to be useful at checking the flow resistance loss of the ventilation seat duct and assessing the flow channel design

The purpose of this study is to investigate information on performance of ventilation in high-tech microelectronicscleanrooms using computational fluid dynamics (CFD). One liquid crystal display (LCD) company was examinedfor evaluating the relationship between workplace concentration and ventilation rate efficiency by using CFDsoftware, Airpak 3.0v. Acetone concentration in cleanroom for final packing process, which is inspected LCD was40.1ppm (GSD 1.91) (n=55) as geometric mean, ranged 7.8~128.7ppm and weakly correlated with ventilationrate efficiency (R²=0.37, p<0.01). Resulting from computational fluid dynamics (CFD), acetone concentrationcan be reduced 62% when install booth type local exhaust system, the most efficient way among 10 other differentventilation methods like increasing volume of general ventilation, changing the location of workers, supply orexhaust diffusers and install downstream type local exhaust system, etc. We found that volitile organic compoundsin cleanroom can be a matter of adverse health effects and the concentration was correlated with ventilation rateefficiency. The most optimized plan to control the contaminants in solvent cleaning work in cleanroom was boothtype local exhaust system.

The purpose of this study is to investigate the actual field application of the airless paint spraying pump driven by the hydraulic power unit under high pressure condition. The velocity and the pressure distributions are obtained using the turbulent k-ε model. The flow characteristics under design condition of spraying pump was numerically conducted by commercial fluid dynamic code(CFX ver. 13). The numerical analysis was performed by transient technique according to the variation of stroke times, which is changing from 0 to 1 seconds by interval of 0.01. Turbulence model, k-ω SST was selected to quaranty more accurate prediction of oil flow. The ICEM-CFD 13 and CFXMesher, reliable grid generation software were also adapted to secure high quality grid necessary for the reliable analysis. According to the simulation results, the flow rate was supplied to the paint spraying pump is 5l/min. These results are in good agreement with design results and could be applied to the design of the high viscosity paint spraying pump.

소각로 내 공기 주입은 연소가스의 체류시간, 미연분 제거 및 출구가스 온도 제어 등의 많은 영향을 끼친다. 이에 따라 2차 연소용 공기량을 변화시켜 충분한 체류시간을 확보하고 850℃ 이상의 출구가스 온도를 유지하며, 높은 turbulent를 관리함으로써 안정적인 소각로 운영이 되어야만 한다. 본 연구에서는 현재 운영 중인 소각장의 소각로를 설계하고, 평균 일일 소각량을 바탕으로 1차 공기량을 산정한 후 2차 공기량을 변화하여 CFD 프로그램(Fluent)을 통해 이론적인 공기유동을 규명하였다. 또한 산정된 공기량을 바탕으로 실제 운영 중인 소각장에 적용함으로써 최적의 연소조건을 도출하였다. CFD simulation 결과 1.2차 공기비는 75:25가 최적의 결과로 나타났으며, 2차 공기 분사노즐 전 후면 유속 비는 1:3에서 가장 우수한 결과로 나타났다. 또한, 실제 운영 중인 소각로에 적용한 결과 적절한 소각로 출구온도는 질소산화물 제거 효율 및 일산화탄소 발생농도에 영향을 미치는 것으로 나타났다.

Ondol, Korean traditional heating system, has widely been used due to high thermal efficency based on its character of thermal dynamics. it has been also well known Ondol has improved real indoor thermal comfort compared to the other heating systems. Recently, a lot of numerical studies using CFD(Computational Fluid Dynamics) in order to understand interal thermal and flow field has been corned out. In present study, we find out the variation of temporal temperature in floor of traditional Goodie between Jul-Gorae and Doidon-Gorae, we have performed numerical analysis. According to flow rate streams, Weet-mok's temperature in a Doidon-Gorae is 7 t:: higher than Jul-Gorae 's. This asymmetry part has an influence on decreasing a standard deviation of the temperature.

Gudul has been used since it was invented, and will be used continuously. But recently, we used rarely. One of the this reason is unequally floor temperature in Gudle because the distribution of heating air is not constant. So flow field in Gudul must be known for uniform temperature in floor. Recently, many fluid engineer have been performed the numerical analysis for the understanding of thermal and flow field based on the development of CFD(Computational Fluid Dynamics). In this paper, to find out the variation of temporal temperature in floor of traditional Gudle, we have performed numerical analysis. Initial temperature in floor is 20 t:' after 880 seconds later, maximum temperature become 2i.Oi t:'. ihour later, maximum temperature in floor become 34.5 t:' because continuously increase from 880 seconds.

The role of the distribution basin role is to apportion incoming raw water to the primary sedimentation basin as part of the water treatment process. The purpose of this study was to calculate the amount of water in the distribution basin using computational fluid dynamics (CFD) analysis and to find a way to improve any non-uniformity. We used the Taguchi method and the minitab tool as optimization methods. The results of the CFD calculation showed that the distribution flow had a deviation of 5% at the minimum inflow, 10% at the average inflow, and 22% at the maximum inflow. At maximum flow, the appropriate heights of the 7 weirs(C, D, A, B, E, F, G) were 40 mm, 20 mm, 20 mm, 0, 0, 0, and 20 mm, respectively, according to the Taguchi optimization tool. Here, the maximum deviation of the distribution amount was 9% and the standard deviation was 23.7. The appropriate heights of the 7 weirs, according to the Minitab tool, were 40 mm, 20 mm, 20 mm, 0, 0, 0, and 20 mm, respectively, for weirs C, D, A, B, E, F, and G. Therefore, the maximum deviation of the distribution amount was 8% and the standard deviation was 17.1, which was slightly improved compared to the Taguchi method.

With global warming and the rapid increase in urbanization accompanied by a concentration of population, the urban heat island effects (UHI) have become an important environmental issue. In this study, rooftop greening and permeable asphalt pavement were selected as measures to reduce urban heat island and applied to a simple virtual urban environment to simulate temperature change using ENVI-met. A total of five measures were tested by dividing the partial and whole area application of each measure. The results showed that the temperature range of the base experiment is 33.11-37.11 ℃, with the UTCI comfort level described as strong heat and very strong heat stress. A case applied permeable asphalt has a greater temperature difference than a rooftop greening case, the larger the area where each condition was applied, the greater the temperature change was.

The optimum design and scale-up of a fast pyrolysis reactor require a fundamental understanding of its hydrodynamics characteristics. Extensive investigations have been carried out, both theoretically and experimentally, to understand the hydrodynamic characteristics of gas-solid two-phase flow in a pyrolysis reactor, such as velocity field, solids concentration, and pressure drop. Numerical simulation can provide a promising alternative for studying the hydrodynamics of gas-solid flows in the fast pyrolysis reactor. In this study, computational particle fluid dynamics (CPFD) was used to investigate the hydrodynamic characteristics of bubbling fluidized bed (BFB) and conical spouted bed (CSB) reactors. These characteristics were analyzed in terms of pressure drop, solid distribution, and solid circulation rate. The BFB reactor was found to have a lower efficiency than the CSB reactor. The pressure drop of the CSB reactor was 25% less than that of the BFB reactor. The solid circulation rate of the CSB reactor was 68% greater than that of the BFB reactor.

A marine flapped rudder is designed to improve the effective lift generated by the rudder; this also improves the maneuverability of the ship. The flap is a high lift device installed at the trailing edge of the rudder to augment lift. In this paper, the characteristics of a thick flapped rudder are analyzed at a low Reynolds number with various ratios of flap chord length to total chord length and various aspect ratios, based on the computational fluid dynamics technique. The performance of the rudder with respect to lift, drag, and center of pressure are investigated, and the efficient ratio of flap chord length to total chord length and improved aspect ratio are determined. Ed: highlight – or ‘superior’. As a case study, the flow on the flapped rudder of an NACA0021 section shape in free stream condition is simulated. The standard k-epsilon turbulence model is used to model the flow around the flapped rudder. The results indicate that the efficient ratio of the flap chord length to total chord length and aspect ratio are 0.3 and 1.4, respectively.

For material recovery of black carbon and pyrolysis oil, pyrolysis is considered as an alternative to combustion-based technologies for treatment of waste tire. This study investigated the heat transfer optimization in a pyrolysis reactor for waste tire chips with a capacity of 24 t/d. The reactor was required to have a larger heat transfer rate from hot gas to tire chips in the early stage of pyrolysis, whereas the rate in the later stage should be lower. This was to prevent thermal cracking of heavy compounds in the pyrolysis vapor and to improve the quality of black carbon. CFD was applied to analyze the flow and heat transfer in the complex geometry of the reactor for a total of nine design cases. It was found that modifications to control the distribution of gas flow rate along the reactor are more effective for the present reactor than adjusting the measures for heat transfer enhancement (such as fins). The ideal design improvement was to divide the reactor into two gas sections for a separate control of the flow rate, and to remove the fins of which its alignment perpendicular to the flow inhibits the hot gas from approaching the tube of tire chips.