Molybdenum is used in electrical contacts, industrial motors, and transportation materials due to its remarkable ability to resist heat and corrosion. It is also used to flame coat other metals. This study investigated, the thermal characteristics of the molybdenum sputtered material, such as electrical conductivity, and stealth effects on infrared thermal imaging cameras. To this end, molybdenum sputtered samples were prepared by varying the density of the base sample and the type of base materials used. Thereafter, the produced samples were evaluated for their surface state, electrical conductivity, electromagnetic field characteristics, thermal characteristics, stealth effect on infrared thermal imaging cameras, and moisture characteristics. As a result of infrared thermal imaging, the molybdenum layer was directed towards the outside air, and when the sample was a film, it demonstrated a greater stealth effect than the fabric. When the molybdenum layer was directed to the outside air, all of the molybdenum sputtering-treated samples exhibited a lower surface temperature than the “untreated sample.” In addition, as a result of confirming electrical properties following the molybdenum sputtering treatment, it was determined that the film exhibited better electrical conductivity than the fabric. All samples that were subjected to molybdenum sputtering exhibited significantly reduced electromagnetic and IR transmission. As a result, the stealth effect on infrared thermal imaging cameras is considered to be a better way of interpreting heat transfer than infrared transmission. These results are expected to have future applications in high-performance smartwear, military uniforms, and medical wear.

In this paper, the effect of Ni (0, 0.5 and 1.0 wt%) additions on the microstructure, mechanical properties and electrical conductivity of cast and extruded Al-MM-Sb alloy is studied using field emission scanning electron microscopy, and a universal tensile testing machine. Molten aluminum alloy is maintained at 750 oC and then poured into a mold at 200 oC. Aluminum alloys are hot-extruded into a rod that is 12 mm in diameter with a reduction ratio of 39:1 at 550 oC. The addition of Ni results in the formation of Al11RE3, AlSb and Al3Ni intermetallic compounds; the area fraction of these intermetallic compounds increases with increasing Ni contents. As the amount of Ni increases, the average grain sizes of the extruded Al alloy decrease to 1359, 536, and 153 μm, and the high-angle grain boundary fractions increase to 8, 20, and 34 %. As the Ni content increases from 0 to 1.0 wt%, the electrical conductivity is not significantly different, with values from 57.4 to 57.1 % IACS.

Cymbidium is one of the most popular and economically important species cultivated as a commercial ornamental crop. The objectives of this study were to determine the appropriate electrical conductivity (EC) treatments of nutrient solution, which gives the highest spike production and quality. Three-year-old Cymbidium ‘Lovely Smile’ plants were grown in the environmentally controlled Information and Communication Technology (ICT) smart greenhouse at Seoul Women’s University. The EC of the nutrient solution was changed in three distinct stages: vegetative, flower initiation, and flower development. The EC treatments were 1-0-1 (dS·m-1, EC101), 1-1-1 (dS·m-1, EC111), 2-1-2 (dS·m-1, EC212), 2-2-2 (dS·m-1, EC222), 3-2-3 (dS·m-1, EC323), 3-3-3 (dS·m-1, EC333) and the pH was adjusted to 6.0–6.5. Pseudobulb diameter increased in the plants treated with EC 101 and EC111 compared to the plants treated with EC 2.0–3.0 dS·m-1 at the reproductive stage 28 weeks after nutrient solution treatment. Flower spike production per pot and pseudobulb showed the highest values in the plants treated with EC111 of 3.3 and 1.4, respectively. Flower spikes length was the highest in the plants treated with EC 1.0 dS·m-1 and stem thickness, number of flowers, and fresh weight were the largest in the plants with EC 1.0 dS·m-1 among the EC treatments. Flower spikes had the worst quality (e.g., plant growth and flowering quality) in the plants treated with EC 3.0 dS·m-1 among the EC treatments. Floral bud and flower development took place 1–2 weeks earlier in the plants treated with EC 101, 111, and 212 than the other treatments. Flower diameter showed the highest values in the plants treated with EC 1.0 dS·m-1 among the EC treatments and flower color showed higher L* and b* values and lower a* values in the plants treated with EC 3.0 dS·m-1 compared to EC 1.0 and 2.0 dS･m-1. Nutrient solution of EC 1.0 dS·m-1 (EC111) can be recommended to improve flower spike quality and advanced flower development of Cymbidium.

배전기 캐비닛은 발전소와 같은 플랜트 시설에서 전자기기 혹은 시스템 컨트롤러 등을 보관하는 역할을 한다. 전기 캐비닛이 지진과 같은 외부하중에 의해 손상될 경우 시스템 장애 혹은 운영 중단이 발생할 수 있다. 안정적이고 지속가능한 에너지 공급을 위해 외부 하중에 의한 전기 캐비닛의 안전성 평가는 매우 중요하다. 전기 캐비닛은 주로 콘크리트 슬래브에 앵커 로 지지되기 때문에 앵커의 지지력 상실로 인해 전기 캐비닛이 손상될 수 있다. 콘크리트 재료는 다양한 불확실성이 존재하며 변동성이 다른 재료에 비해 큰 편이다. 따라서 본 연구에서는 선행연구에서 개발된 전기 캐비닛-앵커 시스템의 유한요소 모델을 이용하여 콘크리트 재료의 불확실성을 고려한 지진 취약도 평가를 수행하였다. 30개의 콘크리트 재료 모델을 라틴 하이퍼큐브 샘플링을 이용하여 샘플링하였으며 울진 지역의 등재해도 스펙트럼을 만족하는 인공지진을 적용하여 시간이력 해석을 수행하였다. 앵커의 응력과 캐비닛 최상단의 변위를 한계상태로 정의하였다. 지진 취약도 분석 결과 0.2g를 초과할 때 앵커의 응력 및 캐비닛 최상단 변위가 정해진 한계상태를 초과하는 것으로 나타났으며 대부분 0.5g에서 파괴되는 것으로 나타났다. 추후 연구에서는 지진의 불확실성과 재료의 불확실성을 동시에 고려하여 지진 취약도 평가를 수행하고자 한다.

The effect of Sm2O3 doping on the microstructure and electrical properties of the ZPCCA-based varistors is comprehensively investigated. The increase of doping content of Sm2O3 results in better densification (from 5.70 to 5.82 g/cm3) and smaller mean grain size (from 7.8 to 4.1 μm). The breakdown electric field increases significantly from 2568 to 6800 V/ cm as the doping content of Sm2O3 increases. The doping of Sm2O3 remarkably improves the nonlinear properties (increasing from 23.9 to 91 in the nonlinear coefficient and decreasing from 35.2 to 0.2 μA/cm2 in the leakage current density). Meanwhile, the doping of Sm2O3 reduces the donor concentration (the range of 2.73 X 1018 to 1.18 X 1018 cm-3) of bulk grain and increases the barrier height (the range of 1.10 to 1.49 eV) at the grain boundary. The density of the interface states decreases in the range of of 5.31 X 1012 to 4.08 X 1012 cm-2 with the increase of doping content of Sm2O3. The dielectric constant decreases from 1594.8 to 507.5 with the increase of doping content of Sm2O3.

Background: Stroke patients have dosiflexor weakness. Functional electrical stimulation (FES) for motor and sensory threshold stimulation has been applied to patients with stroke. Objectives: To investigate effects of FES intervention for motor and sensory threshold on balance and gait in subacute patients with stroke. Design: A randomized controlled trial. Methods: In all, 34 patients with subacute stroke were recruited and randomly assigned to the motor threshold (MTG, n=17) and sensory threshold group (STG, n=17). The measured variables were static balance (BioRescue), dynamic balance (BBS), and gait (TUG test). The study period was 5 weeks, twice a day, 5 days a week. Results: There was a significant difference in all variables except the speed variable (open eye Romberg test) after the intervention; MTG improved more significantly except for the speed variable of the Romberg test (open eye). BBS score increased significantly only in the MTG group after the intervention, and the increase was more significant in the MTG group than in the STG group. The TUG test significantly decreased in both groups after the intervention, and the decrease was more significant in the MTG group than in the STG group. Conclusion: FES for motor threshold applied to patients with subacute stroke appears to be more effective in improving balance and gait ability than FES for sensory threshold.

본 연구에서는 전기 근육 자극(electrical muscle stimulation, EMS)에 사용되는 기존의 하이드로겔 패드의 단 점인 사용 편의성, 쾌적성 등을 보완할 수 있는 e-textile (electronic textile)을 이용한 전기 근육 자극(electrical muscle stimulation, EMS) 패드인 EMSCT (electrical muscle stimulation conductive textile)를 연구를 하고자 하 였다. SWCNT (Single-Walled Carbon Nanotube)와   의 농도 및 함침 공정 횟수를 변수로 하여, EMSCT는 5 가지 직물(라디론, 네오프렌, 스판쿠션, 폴리100%, 베르가모)에 전도성을 부여하여 실험이 진행되었다. SWCNT (Single-Walled Carbon Nanotube)와   을 이용한 패딩 공정을 거쳤으며, 교류 측정 결과 하이드로겔 과 가장 유사한 교류를 나타내는 것은 SWCNT:   = 2:1의 베르가모 원단이라는 결과를 얻을 수 있었다. 또한, 편 의성, 사용성, 심리적 만족성에 관한 사용성 평가를 통해 기존 하이드로겔 패드에 비해 EMSCT가 좋은 사용성을 가진다는 결과를 얻을 수 있다.

The use of recycled materials, such as the fine recycled aggregate made from concrete waste and carbon fiber (CF) product of industrial waste, for the manufacture of conductive recycled mortars (CRM), transforms the mortar base cement normally made with cement:sand in a sustainable multifunctional material, conferring satisfactory mechanical and electrical properties for non-structural uses. This action provides ecological benefits, reducing the use of natural fine aggregates from rivers and the amount of concrete waste deposited in landfills resulting from construction waste. In this investigation the effect of the addition of CF on electrical properties in hardened, wet and dry state, electric percolation in dry state and fluidity of the wet mixture of a cement based CRM was evaluated: fine recycled aggregate: graphite powder, CRM specimens with dimensions of 4 × 4 × 16 cm. were manufactured for 3, 7 and 28 days of age and sand/cement ratios = 1.00, graphite/cement = 1.00, water/cement = 0.60 and CF = 0.1, 0.3, 0.5, 1.0, 1.5, 2.0, 2.5 and 3.0% compared to the weight of cement. The results demonstrated the effect of the addition of CF in CRM, reducing fluidity of the mixtures due to the opposition generated by its physical interaction of CF with recycled sand or recycled fine aggregate and graphite powder (GP), in its case, placing the electric percolation percolation at 0.30% and 0.45% of CF for CRM with and without GP, respectively. Increases in electrical conductivity (EC) without the presence of GP are defined by the contact between the CF and the conductive paths formed. In contrast, with the presence of GP, the EC is defined by the contact between the CF and the GP simultaneously, forming conductive routes with greater performance in its EC.

Graphene fiber is considered as a potential material for wearable applications owing to its lightness, flexibility, and high electrical conductivity. After the graphene oxide (GO) solution in the liquid crystal state is assembled into GO fiber through wet spinning, the reduced graphene oxide (rGO) fiber is obtained through a reduction process. In order to further improve the electrical conductivity, herein, we report N, P, and S doped rGO fibers through a facile vacuum diffusion process. The precursors of heteroatoms such as melamine, red phosphorus, and sulfur powders were used through a vacuum diffusion process. The resulting N, P, and S doped rGO fibers with atomic% of 6.52, 4.43 and 2.06% achieved the higher electrical conductivities compared to that of rGO fiber while preserving the fibrious morphology. In particular, N doped rGO fiber achieved the highest conductivity of 1.11 × 104 S m−1, which is 2.44 times greater than that of pristine rGO fiber. The heteroatom doping of rGO fiber through a vacuum diffusion process is facile to improve the electrical conductivity while maintaining the original structure.

Background: Patients with dysphagia after stroke are treated with neuromuscular electrical stimulation (NMES), but its effect on masseter muscle thickness and bite force in the oral phase is not well known. Objectives: To investigated the effect of NMES on masseter muscle thickness and occlusal force in patients with dysphagia after stroke. Design: Two group, pre-post design. Methods: In this study, 25 patients with dysphagia after stroke were recruited and allocated to either the experimental or the control groups. Patients in the experimental group were treated with NMES to the masseter muscle at the motor level for 30 minutes and were additionally treated with traditional swallowing rehabilitation for 30 minutes. In contrast, patients in the control group were only treated with traditional swallowing rehabilitation for 30 minutes. Masseter muscle thickness was measured using ultrasonography before and after intervention, and bite force was measured using an bite force meter. Results: The experimental group showed significant improvement in masseter muscle thickness and bite force compared to the control group. Conclusion: NMES combined with traditional dysphagia rehabilitation is effective in improving masseter muscle thickness and bite force in patients with dysphagia after stroke.

Background: Stroke patients have weak trunk muscle strength due to brain injury, so a single type of exercise is advised for restoring functionality. However, even after intervention, the problem still lies and it is suggested that another intervention method should be applied with exercise in order to deal with such problem. Objectives: To Investigate the effect of bridge exercise combined with functional electrical stimulation (FES) on trunk muscle activity and balance in stroke patients. Design: Randomized controlled trial. Methods: From July to August 2020, twenty stroke patients was sampled, ten patients who mediated bridge exercises combined with functional electrical stimulation were assigned to experiment group I, and ten patients who mediated general bridge exercises were assigned to experiment groupⅡ. For the pre-test, using surface EMG were measured paralyzed rectus abdominis, erector spinae, transverse abdominis/internal oblique muscle activity, and using trunk impairment scale were measured balance. In order to find out immediate effect after intervention, post-test was measured immediately same way pre-test. Results: Change in balance didn’t show significant difference within and between groups, but muscle activity of trunk was significant difference rectus abdominis and erector spinae within groups I (P<.01), also between groups was significant difference (P<.05). Conclusion: Bridge exercise combined with FES could improve trunk function more effectively than general bridge exercise due to physiological effect of functional electrical stimulation.

In this study, the well-known non-destructive acoustic emission (AE) and electrical resistivity methods were employed to predict quantitative damage in the silo structure of the Wolsong Low and Intermediate Level Radioactive Waste Disposal Center (WLDC), Gyeongju, South Korea. Brazilian tensile test was conducted with a fully saturated specimen with a composition identical to that of the WLDC silo concrete. Bi-axial strain gauges, AE sensors, and electrodes were attached to the surface of the specimen to monitor changes. Both the AE hit and electrical resistance values helped in the anticipation of imminent specimen failure, which was further confirmed using a strain gauge. The quantitative damage (or damage variable) was defined according to the AE hits and electrical resistance and analyzed with stress ratio variations. Approximately 75% of the damage occurred when the stress ratio exceeded 0.5. Quantitative damage from AE hits and electrical resistance showed a good correlation (R = 0.988, RMSE = 0.044). This implies that AE and electrical resistivity can be complementarily used for damage assessment of the structure. In future, damage to dry and heated specimens will be examined using AE hits and electrical resistance, and the results will be compared with those from this study.

연구에서는 새로 설계한 고분자 절연체 위에 전자 주개(Donor)-받개(Acceptor) 기반의 반도체성 공중합체인 Cyclopentadithiophene-alt-benzothiadiazole (CDT-BTZ)를 활성 반도체층으로 형성하여 제작한 고분자 반도체 전계효과 트랜지스터의 전기적 특성을 살펴보았다. 이 연구에서 제시하는 고분자 절연체 박막은 내열성과 전기절연성이 우수한 포스파젠과 멜리민 구조가 가교된 형태를 가지기 때문에 0.006 nm의 매우 평탄한 RMS 표면 거칠기를 가졌으며, 4.5 MV/cm 이상의 매우 우수한 절연강도와 1.55의 다소 낮은 유전 상수를 가진 것으로 측정되었다. 그리고, 고분자 절연 막과 계면을 이루는 CDT-BTZ D-A 타입 반도체성 공중합체 박막은 2.0 x 10-3 cm2/Vs의 선형영역 이동도와 1.0 x 10-3 cm2/Vs의 포화영역 이동도를 갖는 것으로 측정되었다. 이를 통해, 고분자 절연체 위에 형성된 CDT-BTZ 고분자 반도체 박막은 유연 전자회로의 스위칭 소자로 쓰이기에 충분한 잠재성이 있다고 여겨진다.

본 연구에서는 가로수로 식재 한 메타세쿼이아 214본을 대상으로 시각적 활력 평가와 형성층전기저항계(JunsMeter) 측정 결과를 비교하였다. 시각적 활력 평가로 경북 예천군에서는 모든 활력 단계를 관찰하였고, 상주시에서는 ‘매우 양호’와 ‘양호’ 단계만 나타났다. JunsMeter의 측정 평균값은 예천(75.48)보다 상주(86.99)에서 높았다(P=0.01). 방위별 JunsMeter 측정에서는 예천군의 서쪽(71.29)에서 가장 낮았다. 예천과 상주에서 시각적 활력 평가로 구분한 3개 그룹과 JunsMeter 측정값과 일관되게 나타났다.

Background: The spinal nerves, which start at the lumbar level, are connected to the nerve innervation in the knees. Currently, there is a lack of research on the treatment of knee pain through lumbar mobilization. Objectives: To investigate the effects of lumbar joint mobilization (LJM) and transcutaneous electronic nerve stimulation (TENS) on proprioception and muscular strength in volleyball players with chronic knee pain. Design: Two group pre-posttest. Methods: A total of 26 professional volleyball players with chronic knee pain were allocated to the LJM (n=13) and TENS (n=13) groups. In the LJM group, grade III - IV amplitude was applied 3 times for 1 minute (80 times per minute) at the affected lumbar (L2-3) facet joint in the prone position. In the TENS group, the TENS treatment device was used to directly apply or 15 minutes to the area of chronic knee pain (100 Hz, 150 ㎲). Proprioception was measured by knee flexion and extension angles, and muscle strength was evaluated using an isokinetic test. Measurements were taken before and after interventions. Results: In the eye opened conditiond, proprioception significantly increased during both knee extension and flexion after LJM, while only knee extension was significantly increased in the TENS group. There was also a significant difference in knee extension between the two groups. In the eye close conditiond, proprioception was significantly improved only during knee extension in the LJM group, and the difference in knee extension between the groups was also significant (P<.05). The maximum torque of the affected knee joint was significantly improved at 60°/sec in both groups (P<.05); however, there was no difference between the two groups. There was no significant difference in the maximum flexion torque within or between the groups. Conclusion: This study suggests that LJM improved proprioception and muscular strength in volleyball players with chronic knee pain.